User Manual

FCC ID: XUJDBSBLTH

Users Manual

Download: PDF
FCCID_1725297

LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH LAUNCH Thanks for your purchasing our products. 2. Product Components 2.2. Accessories and the communication indicator on on your phone via bluetooth, then use click the desired one (the default name will automatically detect firmware. If a newer attention to the following: FCC STATEMENT installation. If this equipment does Before operating, please carefully read DBScar will blink. For details, please mobile internet to send diagnostic report is DBS LAUNCH_DBScar, which can version is found, it will be updated to the • Follow instructions to install DBScar cause harmful interference to radio 2.1. Ports & Indicators Please check the following accessories: 1. This device complies with Part 15 of DBScar the “Disclaimer” on the last page of this refer to user’s manual included with to repair garage for fault processing and be revised while registering DBScar. latest one. into your vehicle before using. the FCC Rules. Operation is subject to or television reception, which can be user’s manual. 1 1) DBScar x 1； diagnostic tool. analysis. Note: The serial No. of DBScar enclosure • While you are driving a car, do not determined by turning the equipment off On Password: the following two conditions: 2) DBScar user’s manual x 1 Note: For devices named with DBS_ is used to bind to phone or other personal attempt to operate this product, so as to and on, the user is encouraged to try to 1. Intruduction 6. Installing Software The bluetooth name of DBScar is default (1) This device may not cause harmful 2 username, refer to “On Password”. application software. DBScar may bind as DBS LAUNCH_DBScar, which can be avoid distraction and traffic hazard; The correct the interference by one or more interference. DBScar is a new diagnostic Telematics 3. Technical Specifications Visit http://www.dbscar.com to download to multiple phones, but one phone is modified on your phone and no password company assumes no responsibilities of the following measures: 5.2 Mobile phones with diagnostic (2) This device must accept any product for automobile aftermarket. Working voltage: 9~15V Near the center DBScar software to your phone, and suggested to manage one DBScar only. for any traffic accident or economic loss •• Reorient or relocate the receiving 3 software is required for the first time. The user interference received, including interference With excellent performance and powerful of dashboard click it to install. (The method of installing 2. If it is the first time for you to match, resulting from operating it while driving. antenna. Working current: <600mA name mentioned here can be used to log that may cause undesired operation. functions, it can diagnose all electrical This mode applies to individuals. this software is same as that of installing a dialog box will appear. Input default • This product collects and sends data Working temp: -10 to 55°C (32 to 122 F°) Fig. 4-1 in http://www.dbscar.com. For the 2nd 2. Changes or modifications not expressly •• Increase the separation between the control system of vehicls equipped 5.2.1 Diagnosing on phones other phone applications. For details, password 0000 and click “OK” to finish via bluetooth communication. Avoid revision, users need to input the password approved by the party responsible for equipment and receiver. with OBD2 16 PIN connector and is 4 Storage temp: -20 to 70°C (-4 to 158 F°) 5. Using DBScar please refer to user’s manual for your pairing. using this product near a place with To perform this function, please download defined at the first time. compliance could void the user's authority •• Connect the equipment into an outlet compatible with most of LAUNCH’s Storage humidity: <80% phone.) strong electromagnetic interference to Fig.1-1 Product illustration DBScar can be applied to: and install car cloud client software 3. Click on your phone to run it, then DBScar password should be same as login to operate the equipment. on a circuit different from that to bluetooth diagnostic device. Working humidity: <60% on your phone. Then make bluetooth ! While installing, do not attempt to enter the main menu and click the ensure a normal transmission. 5.1 Bluetooth diagnostic devices password of car cloud website. If login which the receiver is connected. User's Manual DBScar provides an Micro USB port desired diagnosing icon. • Any problem related to this product NOTE: This equipment has been tested settings and communicate with DBScar delete data or format SD card. Otherwise, password changes, please also update •• Consult the dealer or an experienced No. Name & Functions 4. Connections This mode applies to repair garages. should be solved by our professional and found to comply with the limits for and an OBD-16 diagnostic socket. Data via bluetooth, sending diagnostic result the application may fail to run. 4. A dialog box will appear, prompting it the DBScar password in a condition of radio/TV technician for help. communication and firmware upgrade can When one car owner drives his/her car technical personnels. The company has a Class B digital device, pursuant to (V1.0) 1 OBD-16 diagnostic connector: 1) Locate vehicle’s DLC socket: it provides saved in DBScar to client software for can be performed only when bluetooth connected network. be done via bluetooth and USB. t o c o n n e c t v e h i c l e ’s O B D 2 equipped with a DBScar to a garage, review. (For “Installing Software” and 7. Bluetooth Setting is linked. Click “YES”. the obligation to make some repair or Part 15 of the FCC Rules. These limits FCC Radiation Exposure Statement standard 16 pins and is generally vehicle maintainer can use LAUCH's If a bluetooth device is found to be are designed to provide reasonable diagnostic socket. located on driver’s side, about 12 inch “Bluetooth Setting”, please refer to To operate software, bluetooth must 5. Choose the paired device and link it. named as DBS_username, it means that replacements to this product according This equipment complies with FCC LAUNCH TECH. CO., LTD. on DBScar stands for Car Cloud logo. diagnostic tool to diagnose your car protection against harmful interference in away from the center of dashboard. Chapter 6 & 7.) be paired and linked, or else you can it belongs to one of car cloud members to the actual conditons. radiation exposure limits set forth for Launch Industrial Park, North of Wuhe Car Cloud is an state-of-an-art individual 2 Power indicator rapidly. Note: After you set or change bluetooth a residential installation. application product, which is developed See Fig. 4-1. If no DLC is found, please 5.2.2 Data recording not obtain any data. Meanwhile, please pair, the system will reset automatically and some vehicle information has been This user manual is subject to change an uncontrolled environment. This Avenue, Banxuegang, Longgang, 1. Make sure vehicle has been energized This equipment generates uses and can equipment should be installed and based on our LAUNCH’s diagnostic 3 Communication indicator refer to automobile repair manual. make sure the communication distance and enter the main menu. saved in it. In this case, users need to without prior notice due to continuous Shenzhen, Guangdong, or ignition has been turned on; DBScar can work as a real-time monitor between your phone and DBScar is kept radiate radio frequency energy and, if operated with minimum distance 20cm devices and technology service platform 2) Plug the DBScar into DLC socket and input correct DBScar password to enter innovation. P.R.China, 518129 4 Micro USB port: to connect to 2. Activate bluetooth of diagnostic tool device for recording vehicle's working within 10 meters. not installed and used in accordance between the radiator & your body. with independent intellectual property the power indicator on DBScar will 8. Upgrading diagnosing interface directly, without Tel: +86-755-84528767 PC or LAUNCH’s diagnostic and scan for other bluetooth devices. status, then send the data to PC client For more information, please visit: with the instructions, may cause harmful rights, mainly providing professional, light up. 1. Enter bluetooth setting interface of selecting vehicle make. device via USB cable. If DBS LAUNCH_DBScar (default software via USB cable for analysis. Update can be done via USB or bluetooth. http://www.dbscar.com interference to radio communications. http://www.cnlaunch.com intelligent vehicle monitoring and your phone, turn bluetooth ON and bluetooth name) in the search result Alternatively, users also can transmit the scan for devices, the system will list After DBScar is energized and properly Disclaimer However, there is no guarantee that http://www.crecorder.com diagnosing service for car owners. list is found, click it to start diagnosing data to car cloud client software installed out the search result. Highlight and connected to supporting device, the system While using this product, please pay more interference will not occur in a particular http://www.dbscar.com -1- -2- -3- -4- -5- -6- -7- -8- -9-


Document Created: 2012-06-05 18:08:07
Document Modified: 2012-06-05 18:08:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC