Test Report

FCC ID: XRAFB404

Test Report

Download: PDF
FCCID_2417715

ONE WORLD OUR APPROVAL Test report 260514-1R3TRFWL Date of issue: October 10, 2014 Applicant: Fitbit Inc. Product: Charge Model: FB404 FCC ID: IC Registration number: XRAFB404 8542A-FB404 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.247 Operation in the 902–928 MHz, 2400–2483.5 MHz, 5725–5850 MHz  RSS-210, Issue 8, December 2010, Annex 8 Frequency Hopping and Digital Modulation Systems Operating in the 902–928 MHz, 2400–2483.5 MHz, and 5725–5850 MHz Bands www.nemko.com Nemko Canada Inc., a testing laboratory, is SCC Accredited LAB accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation LAB Accrédité CCN FCC 15.247 and RSS-210 A8.docx; Date: May 2013 TM

Test location Company name Nemko Canada Inc. Address 303 River Road City Ottawa Province Ontario Postal code K1V 1H2 Country Canada Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Site number FCC: 176392; IC: 2040A-4 (3 m semi anechoic chamber) Tested by David Duchesne, Senior EMC/Wireless Specialist Reviewed by Andrey Adelberg, Senior Wireless/EMC Specialist Date October 10, 2014 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 260514-1R3TRFWL Page 2 of 29

Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Test methods............................................................................................................................................................................................................ 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Exclusions ................................................................................................................................................................................................................. 4 1.6 Test report revision history s .................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart C, general requirements test results ........................................................................................................................................ 5 2.2 FCC Part 15 Subpart C, intentional radiators test results.......................................................................................................................................... 5 2.3 IC RSS-GEN, Issue 3, test results ............................................................................................................................................................................... 5 2.4 IC RSS-210, Issue 8, test results ................................................................................................................................................................................ 6 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 7 3.1 Sample information .................................................................................................................................................................................................. 7 3.2 EUT information ....................................................................................................................................................................................................... 7 3.3 Technical information .............................................................................................................................................................................................. 7 3.4 Product description and theory of operation ........................................................................................................................................................... 7 3.5 EUT exercise details .................................................................................................................................................................................................. 7 3.6 EUT setup diagram ................................................................................................................................................................................................... 8 Section 4. Engineering considerations .................................................................................................................................................................. 9 4.1 Modifications incorporated in the EUT..................................................................................................................................................................... 9 4.2 Technical judgment .................................................................................................................................................................................................. 9 4.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 9 Section 5. Test conditions .................................................................................................................................................................................. 10 5.1 Atmospheric conditions ......................................................................................................................................................................................... 10 5.2 Power supply range ................................................................................................................................................................................................ 10 Section 6. Measurement uncertainty ................................................................................................................................................................. 11 6.1 Uncertainty of measurement ................................................................................................................................................................................. 11 Section 7. Test equipment ................................................................................................................................................................................. 12 7.1 Test equipment list ................................................................................................................................................................................................. 12 Section 8. Testing data ...................................................................................................................................................................................... 13 8.1 FCC 15.207(a) and RSS-Gen 7.2.4 AC power line conducted emissions limits ........................................................................................................ 13 8.2 FCC 15.247(a)(2) and RSS-210 A8.2(a) Minimum 6 dB bandwidth for systems using digital modulation techniques ............................................ 15 8.3 RSS-Gen 4.6.1 Occupied bandwidth ....................................................................................................................................................................... 17 8.4 FCC 15.247(b) and RSS-210 A8.4 (4) Transmitter output power and e.i.r.p. requirements .................................................................................... 19 8.5 FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions....................................................................................................................... 21 8.6 FCC 15.247(e) and RSS-210 A8.2(b) Power spectral density for digitally modulated devices ................................................................................. 28 Section 9. Block diagrams of test set-ups ........................................................................................................................................................... 29 9.1 Radiated emissions set-up...................................................................................................................................................................................... 29 9.2 Conducted emissions set-up .................................................................................................................................................................................. 29 Report reference ID: 260514-1R3TRFWL Page 3 of 29

Section 1 Report summary Section 1. Report summary 1.1 Applicant and manufacturer Company name Fitbit Inc. Address 405 Howard Street City San Francisco Province/State CA Postal/Zip code 94105 Country USA 1.2 Test specifications FCC 47 CFR Part 15, Subpart C, Clause 15.247 Operation in the 902–928 MHz, 2400–2483.5 MHz, 5725–5850 MHz Frequency Hopping and Digital Modulation Systems Operating in the 902–928 MHz, 2400–2483.5 MHz, RSS-210, Issue 8 Annex 8 and 5725–5850 MHz Bands 1.3 Test methods Guidance for compliance measurements on DTS 558074 D01 Meas Guidance v03r02 (2014) operating under 15.247 ANSI C64.3 v 2003 American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz 1.4 Statement of compliance In the configuration tested, the EUT was found compliant. Testing was completed against all relevant requirements of the test standard. Results obtained indicate that the product under test complies in full with the requirements tested. The test results relate only to the items tested. See “Summary of test results” for full details. 1.5 Exclusions None 1.6 Test report revision history s Table 1.6-1: Revision history Revision # Details of changes made to test report TRF Original report issued R1 Corrected serial number R2 Corrected KDB reference R3 Setup photos were removed from the test report as per manufacturer request. Manufacturer files short term confidentiality with setup photos separately. Report reference ID: 260514-1R3TRFWL Page 4 of 29

Section 2: Summary of test results Section 2. Summary of test results 2.1 FCC Part 15 Subpart C, general requirements test results Table 2.1-1: FCC Part 15 Subpart C, general requirements results Part Test description Verdict §15.207(a) Conducted limits Pass §15.31(e) Variation of power source Pass1 §15.203 Antenna requirement Pass2 1 Notes: Measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, was performed with the supply voltage varied between 85 % and 115 % of the nominal rated supply voltage. No noticeable output power variation was observed 2 The Antennas are located within the enclosure of EUT and not user accessible. 2.2 FCC Part 15 Subpart C, intentional radiators test results Table 2.2-1: FCC Part 15 Subpart C, intentional radiators results Part Test description Verdict §15.247(a)(1)(i) Frequency hopping systems operating in the 902–928 MHz band Not applicable §15.247(a)(1)(ii) Frequency hopping systems operating in the 5725–5850 MHz band Not applicable §15.247(a)(1)(iii) Frequency hopping systems operating in the 2400–2483.5 MHz band Not applicable §15.247(a)(2) Minimum 6 dB bandwidth for systems using digital modulation techniques Pass §15.247(b)(1) Maximum peak output power of frequency hopping systems operating in the 2400–2483.5 MHz band and Not applicable 5725–5850 MHz band §15.247(b)(2) Maximum peak output power of Frequency hopping systems operating in the 902–928 MHz band Not applicable §15.247(b)(3) Maximum peak output power of systems using digital modulation in the 902–928 MHz, 2400–2483.5 Pass MHz, and 5725–5850 MHz bands §15.247(c)(1) Fixed point-to-point operation with directional antenna gains greater than 6 dBi Not applicable §15.247(c)(2) Transmitters operating in the 2400–2483.5 MHz band that emit multiple directional beams Not applicable §15.247(d) Spurious emissions Pass §15.247(e) Power spectral density for digitally modulated devices Pass §15.247(f) Time of occupancy for hybrid systems Not applicable Notes: None 2.3 IC RSS-GEN, Issue 3, test results Table 2.3-1: IC RSS-GEN test results Part Test description Verdict 4.6.1 Occupied bandwidth Pass 4.7 Transmitter frequency stability Not applicable 6.1 Receiver spurious emissions limits (radiated) Not applicable 6.2 Receiver spurious emissions limits (antenna conducted) Not applicable 7.2.4 AC power lines conducted emission limits Pass 1 Notes: According to Notice 2012-DRS0126 (from January 2012) section 2.2 of RSS-Gen, Issue 3 has been revised. The EUT does not have a stand-alone receiver neither canner receiver, therefore exempt from receiver requirements. Report reference ID: 260514-1R3TRFWL Page 5 of 29

Section 2: Summary of test results 2.4 IC RSS-210, Issue 8, test results Table 2.4-1: IC RSS-210 test results Part Test description Verdict A8.1 Frequency hopping systems A8.1 (a) Bandwidth of a frequency hopping channel Not applicable A8.1 (b) Minimum channel spacing for frequency hopping systems Not applicable A8.1 (c) Frequency hopping systems operating in the 902–928 MHz band Not applicable A8.1 (d) Frequency hopping systems operating in the 2400–2483.5 MHz band Not applicable A8.1 (e) Frequency hopping systems operating in the 5725–5850 MHz band Not applicable A8.2 Digital modulation systems A8.2 (a) Minimum 6 dB bandwidth Pass A8.2 (b) Maximum power spectral density Pass A8.3 Hybrid systems A8.3 (1) Digital modulation turned off Not applicable A8.3 (2) Frequency hopping turned off Not applicable A8.4 Transmitter output power and e.i.r.p. requirements A8.4 (1) Frequency hopping systems operating in the 902–928 MHz band Not applicable A8.4 (2) Frequency hopping systems operating in the 2400–2483.5 MHz band Not applicable A8.4 (3) Frequency hopping systems operating in the 5725–5850 MHz Not applicable A8.4 (4) Systems employing digital modulation techniques Pass A8.4 (5) Point-to-point systems in 2400–2483.5 MHz and 5725–5850 MHz band Not applicable A8.4 (6) Transmitters which operate in the 2400–2483.5 MHz band with multiple directional beams Not applicable A8.5 Out-of-band emissions Pass Notes: None Report reference ID: 260514-1R3TRFWL Page 6 of 29

Section 3: Equipment under test (EUT) details Section 3. Equipment under test (EUT) details 3.1 Sample information Receipt date July 2, 2014 Nemko sample ID number Item 1 and 2 3.2 EUT information Product name Charge Model FB404 Serial number 08FA0A972D1E 3.3 Technical information Operating band 2400–2483.5 MHz Operating frequency 2402, 2426 and 2480 MHz Modulation type GFSK Occupied bandwidth (99 %) 1.587 MHz Emission designator 1M59F1D Power requirements 5 VDC Antenna information The EUT uses a unique antenna coupling/ non-detachable antenna to the intentional radiator. 3.4 Product description and theory of operation Wireless activity tracker 3.5 EUT exercise details Special software was installed on the unit to control the Bluetooth module. Client provided two samples: Sample 1 was modified to connect directly to the antenna port in order to perform testing conducted. Sample 2 was not modified to perform radiated tests. Report reference ID: 260514-1R3TRFWL Page 7 of 29

Section 3: Equipment under test (EUT) details 3.6 EUT setup diagram EUT Figure 3.6-1: Setup diagram Dell AC-DC Adapter Dell Laptop MN: FA65NS0-00 MN: PP18L AC input EUT USB Cable Figure 3.6-2: AC conducted Emissions Setup diagram Report reference ID: 260514-1R3TRFWL Page 8 of 29

Section 4: Engineering consideration Section 4. Engineering considerations 4.1 Modifications incorporated in the EUT There were no modifications performed to the EUT during this assessment. 4.2 Technical judgment None 4.3 Deviations from laboratory tests procedures No deviations were made from laboratory procedures. Report reference ID: 260514-1R3TRFWL Page 9 of 29

Section 5: Test conditions Section 5. Test conditions 5.1 Atmospheric conditions Temperature 15–30 °C Relative humidity 20–75 % Air pressure 860–1060 mbar When it is impracticable to carry out tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests shall be recorded and stated. 5.2 Power supply range The normal test voltage for equipment to be connected to the mains shall be the nominal mains voltage. For the purpose of the present document, the nominal voltage shall be the declared voltage, or any of the declared voltages ±5 %, for which the equipment was designed. Report reference ID: 260514-1R3TRFWL Page 10 of 29

Section 6: Measurement uncertainty Section 6. Measurement uncertainty 6.1 Uncertainty of measurement Nemko Canada Inc. has calculated measurement uncertainty and is documented in EMC/MUC/001 “Uncertainty in EMC measurements.” Measurement uncertainty was calculated using the methods described in CISPR 16-4 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC measurements; as well as described in UKAS LAB34: The expression of Uncertainty in EMC Testing. Measurement uncertainty calculations assume a coverage factor of K=2 with 95% certainty. Report reference ID: 260514-1R3TRFWL Page 11 of 29

Section 7: Test equipment Section 7. Test equipment 7.1 Test equipment list Table 7.1-1: Equipment list Equipment Manufacturer Model no. Asset no. Cal cycle Next cal. 3 m EMI test chamber TDK SAC-3 FA002047 1 year Mar. 18/15 Receiver/spectrum analyzer Rohde & Schwarz ESU 26 FA002043 1 year Oct. 24/14 Bilog antenna (20–3000 MHz) Sunol JB3 FA002108 1 year Mar. 12/15 Horn antenna (1–18 GHz) EMCO 3115 FA000825 1 year Mar. 10/15 Pre-amplifier (1–18 GHz) JCA JCA118-503 FA002091 1 year June 23/15 50 Ω coax cable C.C.A. None FA002555 1 year June 23/15 50 Ω coax cable Huber + Suhner NONE FA002074 1 year June 23/15 LISN Rohde & Schwarz ENV216 FA002023 1 year Oct. 28/14 50 Ω coax cable C.C.A. None FA002556 1 year June 23/15 Notes: None Table 7.1-2: test software Test description Manufacturer of Software Details Conducted emissions Rhode & Schwarz EMC32, Software for EMC Measurements, Version 8.53.0 Radiated emissions Rhode & Schwarz EMC32, Software for EMC Measurements, Version 8.53.0 Notes: None Report reference ID: 260514-1R3TRFWL Page 12 of 29

Section 8 Testing data Test name FCC 15.207(a) and RSS-Gen 7.2.4 AC power line conducted emissions limits Specification FCC Part 15 Subpart C and RSS-Gen, Issue 3 Section 8. Testing data 8.1 FCC 15.207(a) and RSS-Gen 7.2.4 AC power line conducted emissions limits 8.1.1 Definitions and limits FCC: Except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed the limits in the following table, as measured using a 50 μH/50 Ω line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. IC: The purpose of this test is to measure unwanted radio frequency currents induced in any AC conductor external to the equipment which could conduct interference to other equipment via the AC electrical network. Except when the requirements applicable to a given device state otherwise, for any licence-exempt radiocommunication device equipped to operate from the public utility AC power supply, either directly or indirectly, the radio frequency voltage that is conducted back onto the AC power lines in the frequency range of 0.15 MHz to 30 MHz shall not exceed the limits shown in Table 2. The tighter limit applies at the frequency range boundaries. The conducted emissions shall be measured with a 50 Ω/50 µH line impedance stabilization network (LISN). Table 8.1-1: Conducted emissions limit Conducted limit, dBµV Frequency of emission MHz Quasi-peak Average 0.15–0.5 66 to 56* 56 to 46* 0.5–5 56 46 5–30 60 50 Notes: * Decreases with the logarithm of the frequency. 8.1.2 Test summary Verdict Pass Test date July 10, 2014 Temperature 25 °C Test engineer David Duchesne Air pressure 1007 mbar Test location Ottawa Relative humidity 40 % 8.1.3 Observations, settings and special notes Port under test AC input of external AC-DC adapter EUT setup configuration Table top Measurement details A preview measurement was generated with the receiver in continuous scan mode. Emissions detected within 6 dB or above limit were re-measured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver settings: Resolution bandwidth 9 kHz Video bandwidth 30 kHz Detector mode Peak and Average (preview measurement); Quasi-peak and Average (final measurement) Trace mode Max Hold Measurement time 100 ms (preview measurement); 1000 ms (final measurement) Report reference ID: 260514-1R3TRFWL Page 13 of 29

Section 8 Testing data Test name FCC 15.207(a) and RSS-Gen 7.2.4 AC power line conducted emissions limits Specification FCC Part 15 Subpart C and RSS-Gen, Issue 3 8.1.4 Test data 75 70 65 60 55 50 45 Level in dBµV 40 35 30 25 20 15 10 5 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 120V AC/60Hz, Ph ase CISPR 22 M ain s Q P Class B CISPR 22 M ain s A V Class B Pre view Re sult 1-PK+ Pre view Re sult 2-A VG The spectral plot has been corrected with transducer factors. (i.e. cable loss, LISN factors, and attenuators) Figure 8.1-1 Conducted emissions on phase line 75 70 65 60 55 50 45 Level in dBµV 40 35 30 25 20 15 10 5 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 120V AC/60Hz, Ne u tral CISPR 22 M ain s Q P Class B CISPR 22 M ain s A V Class B Pre view Re sult 1-PK+ Pre view Re sult 2-A VG The spectral plot has been corrected with transducer factors. (i.e. cable loss, LISN factors, and attenuators) Figure 8.1-2 Conducted emissions on neutral line Report reference ID: 260514-1R3TRFWL Page 14 of 29

Section 8 Testing data FCC 15.247(a)(2) and RSS-210 A8.2(a) Minimum 6 dB bandwidth for systems using digital Test name modulation techniques Specification FCC 15 Subpart C and RSS-210, Issue 8 8.2 FCC 15.247(a)(2) and RSS-210 A8.2(a) Minimum 6 dB bandwidth for systems using digital modulation techniques 8.2.1 Definitions and limits FCC and IC: (a) Operation under the provisions of this Section is limited to frequency hopping and digitally modulated intentional radiators that comply with the following provisions: (2) Systems using digital modulation techniques may operate in the 902–928 MHz, 2400–2483.5 MHz and 5725–5850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz. 8.2.2 Test summary Verdict Pass Test date July 9, 2014 Temperature 24.8 °C Test engineer David Duchesne Air pressure 994.6 mbar Test location Ottawa Relative humidity 51.9 % 8.2.3 Observations, settings and special notes Spectrum analyser settings: Resolution bandwidth 1–5 % of DTS BW (no wider than 100 kHz) Video bandwidth ≥3 × RBW Frequency span 5 MHz Detector mode Peak Trace mode Max Hold 8.2.4 Test data Table 8.2-1: 6 dB bandwidth results Frequency, MHz 6 dB bandwidth, kHz Limit, MHz 2402 (Low channel) 609 0.50 2426 (Mid channel) 609 0.50 2480 (High channel) 641 0.50 Notes: None Report reference ID: 260514-1R3TRFWL Page 15 of 29

Section 8 Testing data FCC 15.247(a)(2) and RSS-210 A8.2(a) Minimum 6 dB bandwidth for systems using digital Test name modulation techniques Specification FCC 15 Subpart C and RSS-210, Issue 8 8.2.5 Test data * RBW 50 kHz Marker 1 [T1 ] * RBW 50 kHz Marker 1 [T1 ] VBW 200 kHz -4.74 dBm VBW 200 kHz -5.34 dBm Ref 11.9 dBm * Att 10 dB SWT 2.5 ms 2.402304487 GHz Ref 11.9 dBm * Att 10 dB SWT 2.5 ms 2.439695513 GHz 10 Offset 1.9 dB Delta 2 [T1 ] 10 Offset 1.9 dB Delta 1 [T1 ] 5.99 dB 0.49 dB 2 -312.500000000 kHz A 608.974358971 kHz A 0 Delta 1 [T1 ] 0 1 1 1 1 1 PK 0.09 dB 1 PK VIEW VIEW -608.974358976 kHz -10 LVL -10 LVL -20 -20 PS PS -30 -30 -40 -40 3DB 3DB AC AC -50 -50 -60 -60 -70 -70 -80 -80 Center 2.402 GHz 500 kHz/ Span 5 MHz Center 2.44 GHz 500 kHz/ Span 5 MHz Date: 9.JUL.2014 16:18:02 Date: 9.JUL.2014 16:18:48 Figure 8.2-1: 6 dB bandwidth – Low channel Figure 8.2-2: 6 dB bandwidth – Mid channel * RBW 50 kHz Marker 2 [T1 ] VBW 200 kHz 0.83 dBm Ref 11.9 dBm * Att 10 dB SWT 2.5 ms 2.479983974 GHz 10 Offset 1.9 dB Marker 1 [T1 ] -6.00 dBm 2 2.480328526 GHz A 0 Delta 1 [T1 ] 1 1 1 PK 0.55 dB VIEW -641.025641026 kHz -10 LVL -20 PS -30 -40 3DB AC -50 -60 -70 -80 Center 2.48 GHz 500 kHz/ Span 5 MHz Date: 9.JUL.2014 16:16:45 Figure 8.2-3: 6 dB bandwidth – High channel Report reference ID: 260514-1R3TRFWL Page 16 of 29

Section 8 Testing data Test name RSS-Gen 4.6.1 Occupied bandwidth Specification RSS-Gen, Issue 3 8.3 RSS-Gen 4.6.1 Occupied bandwidth 8.3.1 Definitions and limits When an occupied bandwidth value is not specified in the applicable RSS, the transmitted signal bandwidth to be reported is to be its 99 percent emission bandwidth, as calculated or measured. The transmitter shall be operated at its maximum carrier power measured under normal test conditions. The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1 percent of the selected span as is possible without being below 1 percent. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a sampling detector shall be used since a peak or, peak hold, may produce a wider bandwidth than actual. The trace data points are recovered and are directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 percent of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. 8.3.2 Test summary Verdict Pass Test date July 9, 2014 Temperature 24.8 °C Test engineer David Duchesne Air pressure 994.6 mbar Test location Ottawa Relative humidity 51.9 % 8.3.3 Observations, settings and special notes Spectrum analyser settings: Resolution bandwidth ≥1 % of span Video bandwidth ≥3 × RBW Detector mode Peak Trace mode Max Hold 8.3.4 Test data Table 8.3-1: 99 % bandwidth results Modulation, MHz 99 % bandwidth, MHz 2402 (Low channel) 1.026 2426 (Mid channel) 1.218 2480 (High channel) 1.587 Notes: None Report reference ID: 260514-1R3TRFWL Page 17 of 29

Section 8 Testing data Test name RSS-Gen 4.6.1 Occupied bandwidth Specification RSS-Gen, Issue 3 8.3.4 Test data, continued * RBW 50 kHz Marker 1 [T1 ] * RBW 50 kHz Marker 1 [T1 ] VBW 200 kHz 1.24 dBm VBW 200 kHz 1.24 dBm Ref 11.9 dBm * Att 10 dB SWT 2.5 ms 2.401991987 GHz Ref 11.9 dBm * Att 10 dB SWT 2.5 ms 2.439991987 GHz 10 Offset 1.9 dB OBW 1.025641026 MHz 10 Offset 1.9 dB OBW 1.217948718 MHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 1 1 -13.76 dBm A -19.80 dBm A 0 2.401495192 GHz 0 2.439366987 GHz 1 PK Temp 2 [T1 OBW] 1 PK Temp 2 [T1 OBW] MAXH MAXH -14.87 dBm -16.63 dBm -10 T1 LVL -10 LVL T2 2.402520833 GHz 2.440584936 GHz T2 T1 -20 -20 PS PS -30 -30 -40 -40 3DB 3DB AC AC -50 -50 -60 -60 -70 -70 -80 -80 Center 2.402 GHz 500 kHz/ Span 5 MHz Center 2.44 GHz 500 kHz/ Span 5 MHz Date: 9.JUL.2014 16:10:17 Date: 9.JUL.2014 16:10:55 Figure 8.3-1: 99 % bandwidth – Low channel Figure 8.3-2: 99 % bandwidth – Mid channel * RBW 50 kHz Marker 1 [T1 ] VBW 200 kHz 1.44 dBm Ref 11.9 dBm * Att 10 dB SWT 2.5 ms 2.479991987 GHz 10 Offset 1.9 dB OBW 1.586538462 MHz Temp 1 [T1 OBW] 1 -16.70 dBm A 0 2.479214744 GHz 1 PK Temp 2 [T1 OBW] MAXH -16.72 dBm -10 LVL 2.480801282 GHz T1 T2 -20 PS -30 -40 3DB AC -50 -60 -70 -80 Center 2.48 GHz 500 kHz/ Span 5 MHz Date: 9.JUL.2014 16:11:31 Figure 8.3-3: 99 % bandwidth – High channel Report reference ID: 260514-1R3TRFWL Page 18 of 29

Section 8 Testing data Test name FCC 15.247(b) and RSS-210 A8.4 (4) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.4 FCC 15.247(b) and RSS-210 A8.4 (4) Transmitter output power and e.i.r.p. requirements 8.4.1 Definitions and limits FCC: (b) The maximum peak conducted output power of the intentional radiator shall not exceed the following: (3) For systems using digital modulation in the 902–928 MHz, 2400–2483.5 MHz, and 5725–5850 MHz bands: 1 W (30 dBm). As an alternative to a peak power measurement, compliance with the one Watt limit can be based on a measurement of the maximum conducted output power. Maximum Conducted Output Power is defined as the total transmit power delivered to all antennas and antenna elements averaged across all symbols in the signaling alphabet when the transmitter is operating at its maximum power control level. Power must be summed across all antennas and antenna elements. The average must not include any time intervals during which the transmitter is off or is transmitting at a reduced power level. If multiple modes of operation are possible (e.g., alternative modulation methods), the maximum conducted output power is the highest total transmit power occurring in any mode. (4) The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. (i) Systems operating in the 2400–2483.5 MHz band that are used exclusively for fixed, point-to-point operations may employ transmitting antennas with directional gain greater than 6 dBi provided the maximum peak output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6 dBi. Fixed, point-to-point operation, as used in paragraphs (b)(3)(i) and (b)(3)(ii) of this section, excludes the use of point-to-multipoint systems, omnidirectional applications, and multiple co-located intentional radiators transmitting the same information. The operator of the spread spectrum intentional radiator or, if the equipment is professionally installed, the installer is responsible for ensuring that the system is used exclusively for fixed, point-to-point operations. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. (c) Operation with directional antenna gains greater than 6 dBi. (2) In addition to the provisions in paragraphs (b)(1), (b)(3), (b)(4) and (c)(1)(i) of this section, transmitters operating in the 2400–2483.5 MHz band that emit multiple directional beams, simultaneously or sequentially, for the purpose of directing signals to individual receivers or to groups of receivers provided the emissions comply with the following: (i) Different information must be transmitted to each receiver. (ii) If the transmitter employs an antenna system that emits multiple directional beams but does not do emit multiple directional beams simultaneously, the total output power conducted to the array or arrays that comprise the device, i.e., the sum of the power supplied to all antennas, antenna elements, staves, etc. and summed across all carriers or frequency channels, shall not exceed the limit specified in paragraph (b)(1) or (b)(3) of this section, as applicable. However, the total conducted output power shall be reduced by 1 dB below the specified limits for each 3 dB that the directional gain of the antenna/antenna array exceeds 6 dBi. The directional antenna gain shall be computed as follows: (A) The directional gain shall be calculated as the sum of 10 log (number of array elements or staves) plus the directional gain of the element or stave having the highest gain. IC: A8.4 (4) Transmitter Output Power and e.i.r.p. Requirements for systems employing digital modulation techniques operating in the bands 902–928 MHz, 2400–2483.5 MHz and 5725–5850 MHz bands For systems employing digital modulation techniques operating in the bands 902–928 MHz, 2400–2483.5 MHz and 5725–5850 MHz, the maximum peak conducted output power shall not exceed 1 W. Except as provided in Section A8.4(5), the e.i.r.p. shall not exceed 4 W. As an alternative to a peak power measurement, compliance can be based on a measurement of the maximum conducted output power (see RSS-Gen). Report reference ID: 260514-1R3TRFWL Page 19 of 29

Section 8 Testing data Test name FCC 15.247(b) and RSS-210 A8.4 (4) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.4.2 Test summary Verdict Pass Test date July 9, 2014 Temperature 24.8 °C Test engineer David Duchesne Air pressure 994.6 mbar Test location Ottawa Relative humidity 51.9 % 8.4.3 Observations, settings and special notes  The test was performed according to DTS guidelines section 9.1.1: RBW ≥ DTS bandwidth  EUT was modified to connect directly to the antenna port in order to perform testing conducted. Spectrum analyser settings: Resolution bandwidth ≥ DTS bandwidth Video bandwidth ≥ 3× RBW Detector mode Peak Trace mode Max Hold 8.4.4 Test data Table 8.4-1: Conducted Output power measurements results Frequency, MHz Conducted power, dBm Limit, dBm Margin, dB 2402 (Low channel) 1.31 30.00 28.69 2426 (Mid channel) 1.40 30.00 28.60 2480 (High channel) 1.41 30.00 28.59 Notes: None Table 8.4-2: EIRP calculation results Frequency, MHz Conducted power, dBm Antenna gain, dBi EIRP, dBm EIRP Limit, dBm Margin, dB 2402 (Low channel) 1.31 1.71 3.02 36.00 32.98 2426 (Mid channel) 1.40 1.71 3.11 36.00 32.89 2480 (High channel) 1.41 1.71 3.12 36.00 32.88 Notes: EIRP = Conducted output power [dBm] + antenna gain [dBi] Antenna gain = 1.71 dBi Report reference ID: 260514-1R3TRFWL Page 20 of 29

Section 8 Testing data Test name FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.5 FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions 8.5.1 Definitions and limits FCC: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). IC: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated device is operating, the radio frequency power that is produced shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under Section A8.4(4), the attenuation required shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in Tables 2 and 3 is not required. Table 8.5-1: FCC §15.209 and RSS-Gen – Radiated emission limits Frequency, Field strength of emissions Measurement distance, m MHz µV/m dBµV/m 0.009–0.490 2400/F 67.6 – 20 × log10(F) 300 0.490–1.705 24000/F 87.6 – 20 × log10(F) 30 1.705–30.0 30 29.5 30 30–88 100 40.0 3 88–216 150 43.5 3 216–960 200 46.0 3 above 960 500 54.0 3 Notes: In the emission table above, the tighter limit applies at the band edges. F is in kHz units For frequencies above 1 GHz the limit on peak RF emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment under test Table 8.5-2: IC restricted frequency bands MHz MHz MHz GHz 0.090–0.110 12.51975–12.52025 399.9–410 5.35–5.46 2.1735–2.1905 12.57675–12.57725 608–614 7.25–7.75 3.020–3.026 13.36–13.41 960–1427 8.025–8.5 4.125–4.128 16.42–16.423 1435–1626.5 9.0–9.2 4.17725–4.17775 16.69475–16.69525 1645.5–1646.5 9.3–9.5 4.20725–4.20775 16.80425–16.80475 1660–1710 10.6–12.7 5.677-5.683 25.5–25.67 1718.8–1722.2 13.25–13.4 6.215–6.218 37.5–38.25 2200–2300 14.47–14.5 6.26775–6.26825 73–74.6 2310–2390 15.35–16.2 6.31175–6.31225 74.8–75.2 2655–2900 17.7–21.4 8.291–8.294 108–138 3260–3267 22.01–23.12 8.362–8.366 156.52475–156.52525 3332–3339 23.6–24.0 8.37625–8.38675 156.7–156.9 3345.8–3358 31.2–31.8 8.41425–8.41475 240–285 3500–4400 36.43–36.5 12.29–12.293 322–335.4 4500–5150 Above 38.6 Notes: Certain frequency bands listed in Table 8.5-2 and above 38.6 GHz are designated for low-power licence-exempt applications. These frequency bands and the requirements that apply to the devices are set out in this Standardt Report reference ID: 260514-1R3TRFWL Page 21 of 29

Section 8 Testing data Test name FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.5.1 Definitions and limits, continued Table 8.5-3: FCC restricted frequency bands MHz MHz MHz GHz 0.090–0.110 16.42–16.423 399.9–410 4.5–5.15 0.495–0.505 16.69475–16.69525 608–614 5.35–5.46 2.1735–2.1905 16.80425–16.80475 960–1240 7.25–7.75 4.125–4.128 25.5–25.67 1300–1427 8.025–8.5 4.17725–4.17775 37.5–38.25 1435–1626.5 9.0–9.2 4.20725–4.20775 73–74.6 1645.5–1646.5 9.3–9.5 6.215–6.218 74.8–75.2 1660–1710 10.6–12.7 6.26775–6.26825 108–121.94 1718.8–1722.2 13.25–13.4 6.31175–6.31225 123–138 2200–2300 14.47–14.5 8.291–8.294 149.9–150.05 2310–2390 15.35–16.2 8.362–8.366 156.52475–156.52525 2483.5–2500 17.7–21.4 8.37625–8.38675 156.7–156.9 2690–2900 22.01–23.12 8.41425–8.41475 162.0125–167.17 3260–3267 23.6–24.0 12.29–12.293 167.72–173.2 3332–3339 31.2–31.8 12.51975–12.52025 240–285 3345.8–3358 36.43–36.5 12.57675–12.57725 322–335.4 3600–4400 Above 38.6 13.36–13.41 Notes: None 8.5.2 Test summary Verdict Pass Test date July 9, 2014 Temperature 24.8 °C Test engineer David Duchesne Air pressure 994.6 mbar Test location Ottawa Relative humidity 51.9 % Report reference ID: 260514-1R3TRFWL Page 22 of 29

Section 8 Testing data Test name FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.5.3 Observations, settings and special notes  The spectrum was searched from 30 MHz to the 10th harmonic.  The EUT was measured on three orthogonal axis for radiated measurements.  A fresh battery was used throughout the tests. Setup details EUT setup configuration Table top Test facility 3 m Semi anechoic chamber Measuring distance 3m Antenna height variation 1–4 m Turn table position 0–360° Spectrum analyser settings for radiated measurements within restricted bands below 1 GHz: Resolution bandwidth 100 kHz Video bandwidth 300 kHz Detector mode Peak Trace mode Max Hold Spectrum analyser settings for peak radiated measurements within restricted bands above 1 GHz: Resolution bandwidth 1 MHz Video bandwidth 3 MHz Detector mode Peak Trace mode Max Hold Spectrum analyser settings for average radiated measurements within restricted bands above 1 GHz: Resolution bandwidth 1 MHz Video bandwidth 10 Hz Detector mode Peak Trace mode Max Hold Spectrum analyser settings for conducted spurious emissions measurements: Resolution bandwidth 100 kHz Video bandwidth 300 kHz Detector mode Peak Trace mode Max Hold Report reference ID: 260514-1R3TRFWL Page 23 of 29

Section 8 Testing data Test name FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.5.4 Test data Table 8.5-4: Duty Cycle Single Pulse, µsec Number of Pulses in 100 ms Total on time in 100 ms Duty cycle correction factor, dB 436 160 69.76 -3.13 Notes:  Tx  Duty cycle / average factor  20  log10  100 ms   100 ms  RBW 1 MHz Delta 1 [T1 ] RBW 1 MHz Delta 1 [T1 ] VBW 3 MHz -0.61 dB VBW 3 MHz -9.35 dB Ref 100 dBµV * Att 10 dB SWT 2 ms 435.897436 µs Ref 100 dBµV * Att 10 dB SWT 10 ms -192.307692 µs 100 Marker 1 [T1 ] 100 Marker 1 [T1 ] 78.82 dBµV 79.57 dBµV 625.000000 µs A 625.000000 µs A 90 90 1 PK 1 PK * 1 1 VIEW 1 TRG VIEW TRG 80 80 1 TDS TDS 70 70 PS PS 60 TRG 59.8 dBµV 60 TRG 59.8 dBµV 50 50 3DB 3DB 40 AC 40 AC 30 30 20 20 10 10 0 0 Center 2.402 GHz 200 µs/ Center 2.402 GHz 1 ms/ Date: 9.JUL.2014 21:42:16 Date: 9.JUL.2014 21:43:05 Figure 8.5-1: Duty Cycle pulse Figure 8.5-2: Duty Cycle pulse – 10 ms RBW 5 MHz RBW 1 MHz Delta 1 [T1 ] VBW 10 MHz VBW 3 MHz -0.57 dB Ref 100 dBµV * Att 10 dB SWT 100 ms Ref 100 dBµV * Att 10 dB SWT 2 ms -192.307692 µs 100 100 Marker 1 [T1 ] 78.82 dBµV A 625.000000 µs A 90 90 1 PK * 1 PK VIEW VIEW 1 1 TRG 80 80 TDS TDS 70 70 PS PS 60 60 TRG 59.8 dBµV 50 50 3DB 3DB 40 AC 40 AC 30 30 20 20 10 10 0 0 Center 2.402 GHz 10 ms/ Center 2.402 GHz 200 µs/ Date: 9.JUL.2014 21:44:48 Date: 9.JUL.2014 21:42:41 Figure 8.5-3: Duty Cycle pulse – 100 ms Figure 8.5-4: Duty Cycle pulse off time Report reference ID: 260514-1R3TRFWL Page 24 of 29

Section 8 Testing data Test name FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.5.4 Test data, continued * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz Delta 2 [T1 ] VBW 300 kHz 0.18 dBm VBW 300 kHz -41.89 dB Ref 11.9 dBm * Att 10 dB SWT 2.5 s 2.397625000 GHz Ref 11.9 dBm * Att 10 dB SWT 2.5 s -1.223775000 GHz 10 Offset 1.9 dB Delta 2 [T1 ] 10 Offset 1.9 dB Marker 1 [T1 ] -42.78 dB -0.88 dBm 1 -1.198800000 GHz A 2.435087500 GHz A 1 0 0 1 PK 1 PK MAXH MAXH -10 LVL -10 LVL -20 -20 PS PS -30 -30 -402 -402 3DB 3DB AC AC -50 -50 -60 -60 -70 -70 -80 -80 Start 25 MHz 2.4975 GHz/ Stop 25 GHz Start 25 MHz 2.4975 GHz/ Stop 25 GHz Date: 9.JUL.2014 16:48:06 Date: 9.JUL.2014 16:48:39 Figure 8.5-5: Conducted spurious emissions – Low channel Figure 8.5-6: Conducted spurious emissions – Mid channel * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 1.52 dBm Ref 11.9 dBm * Att 10 dB SWT 2.5 s 2.472550000 GHz 10 Offset 1.9 dB Delta 2 [T1 ] -45.82 dB 1 -1.236262500 GHz A 0 1 PK VIEW -10 LVL -20 PS -30 -402 3DB AC -50 -60 -70 -80 Start 25 MHz 2.4975 GHz/ Stop 25 GHz Date: 9.JUL.2014 16:49:21 Figure 8.5-7: Conducted spurious emissions – High channel Report reference ID: 260514-1R3TRFWL Page 25 of 29

Section 8 Testing data Test name FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.5.4 Test data, continued * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 1.15 dBm VBW 300 kHz 1.33 dBm Ref 11.9 dBm * Att 10 dB SWT 10 ms 2.402000000 GHz Ref 11.9 dBm * Att 10 dB SWT 10 ms 2.480000000 GHz 10 Offset 1.9 dB Delta 2 [T1 ] 10 Offset 1.9 dB Delta 2 [T1 ] -43.35 dB -46.54 dB 1 1 -2.102051282 MHz A 3.728461538 MHz A 0 0 1 PK 1 PK VIEW VIEW -10 LVL -10 LVL -20 -20 PS PS -30 -30 2 -40 -40 2 3DB 3DB AC AC -50 -50 -60 -60 -70 -70 -80 -80 Center 2.4 GHz 2 MHz/ Span 20 MHz Center 2.4835 GHz 2 MHz/ Span 20 MHz Date: 9.JUL.2014 16:52:25 Date: 9.JUL.2014 16:50:34 Figure 8.5-8: Conducted spurious emissions Low band edge Figure 8.5-9: Conducted spurious emissions High band edge Report reference ID: 260514-1R3TRFWL Page 26 of 29

Section 8 Testing data Test name FCC 15.247(d) and RSS-210 A8.5 Spurious (out-of-band) emissions Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.5.4 Test data, continued Table 8.5-5: Radiated field strength measurement results Frequency, Peak Field strength, dBµV/m 1 Margin, Channel MHz Measured Limit dB Low 2390.000 45.74 74.00 28.26 Low 2371.025 49.76 74.00 24.24 Low 4803.968 57.00 74.00 17.00 Mid 4879.903 56.90 74.00 17.10 High 2483.500 47.25 2 74.00 26.75 High 4960.128 54.79 74.00 19.21 1 Notes: Field strength includes correction factor of antenna, cable loss, amplifier, and attenuators where applicable 2 Result obtained via maker delta method. See figures 8.510 and 8.511. Table 8.5-6: Average field strength measurement results Frequency, Peak Field 1 Duty Cycle correction Average Field strength, dBµV/m 2 Margin, Channel strength, dBµV/m Factor, dB MHz Calculated Limit dB Low 4803.968 57.00 -3.13 53.87 54.00 0.13 Mid 4879.903 56.90 -3.13 53.77 54.00 0.23 High 4960.128 54.79 -3.13 51.66 54.00 2.34 1 Notes: Field strength includes correction factor of antenna, cable loss, amplifier, and attenuators where applicable 2 Average Field Strength dBµV/m = Peak Field strength dBµV/m + Duty cycle correction factor dB * RBW 1 MHz Marker 2 [T1 ] * RBW 100 kHz Marker 2 [T1 ] VBW 3 MHz 64.64 dBµV VBW 300 kHz 46.79 dBµV Ref 110 dBµV * Att 10 dB SWT 2.5 ms 2.483532051 GHz Ref 110 dBµV * Att 10 dB SWT 10 ms 2.483506410 GHz 110 Marker 1 [T1 ] 110 Marker 1 [T1 ] 99.81 dBµV 99.35 dBµV 1 1 2.480006410 GHz A 2.480006410 GHz A 100 100 1 PK 1 PK VIEW VIEW 90 90 TDS TDS 80 80 PS PS 70 70 2 60 60 3DB 3DB 50 AC 50 2 AC 40 40 30 30 20 20 10 10 Center 2.4835 GHz 2 MHz/ Span 20 MHz Center 2.4835 GHz 2 MHz/ Span 20 MHz Date: 9.JUL.2014 21:55:51 Date: 9.JUL.2014 21:57:07 Figure 8.5-10: Radiated spurious emission at 2483.5 MHz (RBW 1 MHz) Figure 8.5-11: Radiated spurious emission at 2483.5 MHz (RBW 100 kHz) Report reference ID: 260514-1R3TRFWL Page 27 of 29

Section 8 Testing data Test name FCC Clause 15.247(e) and RSS-210 A8.2(b) Power spectral density for digitally modulated devices Specification FCC Part 15 Subpart C and RSS-210, Issue 8 8.6 FCC 15.247(e) and RSS-210 A8.2(b) Power spectral density for digitally modulated devices 8.6.1 Definitions and limits FCC: For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. This power spectral density shall be determined in accordance with the provisions of paragraph (b) of this section. The same method of determining the conducted output power shall be used to determine the power spectral density. IC: The transmitter power spectral density conducted from the transmitter to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission or over 1.0 second if the transmission exceeds 1.0-second duration. This power spectral density shall be determined in accordance with the provisions of Section A8.4(4); (i.e. the power spectral density shall be determined using the same method for determining the conducted output power). 8.6.2 Test summary Verdict Pass Test date July 9, 2014 Temperature 24.8 °C Test engineer David Duchesne Air pressure 994.6 mbar Test location Ottawa Relative humidity 51.9 % 8.6.3 Observations, settings and special notes The test was performed using method described in section 10.2 Option 2 of the 558074 D01 DTS Meas Guidance v03r2. Spectrum analyser settings: Resolution bandwidth 3 kHz ≤ RBW ≤ 100 kHz. Video bandwidth ≥ 3 × RBW Frequency span 1.5 times the DTS bandwidth. Detector mode Peak Sweeps Max hold 8.6.4 Test data Table 8.6-1: PSD measurements results Frequency, MHz PSD, dBm/100 kHz PSD limit, dBm/3 kHz Margin, dB 2402 -11.64 8 19.64 2426 -12.75 8 20.75 2480 -12.64 8 20.64 Notes: None Report reference ID: 260514-1R3TRFWL Page 28 of 29

Section 9: Block diagrams of test set-ups Section 9. Block diagrams of test set-ups 9.1 Radiated emissions set-up Radio absorbing material Antenna mast Test antenna 4m 3m Test EUT antenna Non- conducting table 1m 0.8 m Metal ground plane Turn table Receiver 9.2 Conducted emissions set-up Vertical ground plane 40 cm from EUT EUT 0.8 m Power supply Non- LISN conducting table 0.8 m Horizontal ground plane Receiver Report reference ID: 260514-1R3TRFWL Page 29 of 29


Document Created: 2014-10-10 08:27:48
Document Modified: 2014-10-10 08:27:48
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC