Cover Letter (Modular Approval Request).pdf

FCC ID: XQPLJ041427TX

Cover Letter(s)

Download: PDF
FCCID_2254292

FCC ID: 2AAWXIPH1062 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch April 25, 2014 Dear Application Examiner, Incipio Technologies, Inc., INCIPIO Focal module, FCC ID: 2AAWXIPH1062, would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip DK-9107. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is DK-9107. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Robert Huang / Senior Engineer Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch Report No.: RF140120C32


Document Created: 2014-04-25 13:33:18
Document Modified: 2014-04-25 13:33:18
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC