User Manual

FCC ID: XQCBHAPB001

Users Manual

Download: PDF
FCCID_4139209

95mm Protection at the press of a button. Ring Panic Button is an instant trigger for Ring Alarm. Contents 1. How it looks... How it works... 2. Begin the setup process near your Ring Alarm Base Station. When prompted, scan the QR Code or enter the PIN. 1. Diagram To signal your Ring Alarm, press and hold the Panic Button for Ring Alarm In case of emergency, Panic Button can be used to signal your Ring Alarm Base Station to sound its Say hello to your Panic Button for 3 seconds. The LED ring will turn blue. Set up your In the Ring app, tap Set Up a Device. This begins the pairing process. Ring Panic Button. Panic Button Choose Security Devices, then Base Station, The QR Code and PIN are on the back of your siren. If you’re subscribed to Ring Protect Plus, our Setup then Ring Panic Button, and tap Add Device. Panic Button and in the product packaging. 24/7 professional monitoring center is notified and 2. In-app Setup Panic Button button As the Panic Button signals your Base Station, the LED emergency responders can be dispatched.* ring will rapidly pulse blue. in the Ring app. To complete the setup process, follow the in-app instructions. Before you proceed... Once your Panic Button successfully signals 95mm 3. Physical Installation your Alarm, the LED will alternate between red The Panic Button can trigger an alarm as soon as you LED ring and blue five times. add it to your system. To prevent false alarms, continue with setup only when ready. The siren will sound and, if subscribed to Ring Protect 4. Additional Information Plus, we will notify the monitoring center and emergency responders may be dispatched. Mounting bracket *F  or more info on Ring Protect Plus and 24/7 professional monitoring, visit ring.com/protect-plans. If you’ve recently set up a Ring Alarm, professional monitoring won’t be available until after the seven-day Practice Mode runs out. Ring_Panic_Button_manual.indd 3,9 12/18/18 8:40 AM

When prompted, pull out the clear tab. This turns the Panic Button on. Your Base Station then 3. Choose a location. You can place your Panic Button just about anywhere Test your Panic Button’s connection. Now that you’ve picked a spot, you should test your Secure the mounting bracket and mount Panic Button. 4. How to replace the battery: If you get a “Low Battery” notification in the app, it’s How to remove Panic Button from your system: More LED patterns: Failed to trigger Alarm 5 Red Blinks Install your Additional finds it automatically. inside your home. You may want to put it on a desk in Panic Button’s connection with the Base Station. Once you’ve decided on a location, secure the time to replace the battery. Twist the lid on your Panic Open the side menu in the Ring app and tap Devices, The Panic Button can trigger an alarm as soon your office, or mount it on a wall in your bedroom. You mounting bracket with either the included screws Button counter-clockwise and lift to remove. Replace then Base Station. Select your Panic Button and tap the Because the signal failed, the siren will not sound. Even if To do so, simply press the Setup button located on the Panic Button. information. as you add it to your system. If pressed, it will can even put it in the bathroom, but be sure not to get or the double-sided tape. the battery with a new CR123A cell. The Panic Button gear-shaped icon. Then tap Remove Device. you’ve subscribed to Ring Protect Plus, the monitoring center immediately trigger your Alarm. it wet. side of the device. Don’t worry, the test will not set off then reconnects to your Base Station automatically. and emergency responders will not be notified. Remember, in your Alarm. Place Panic Button on the bracket posts, then slide an emergency, calling 9-1-1 is a safe option. As the Panic Button pairs to your Base Station, its LED When prompted, open the Panic Button and remove Also, verify it’s close enough to connect with your Base to lock it in place. Place the lid back on the Panic Button, taking care to and reinstall the battery to complete the removal. ring will blink. Once it pairs, the LED glows blue for When Base Station has detected the signal from Panic Pairing in Blue LED blinks until Station. (We’ll explain how to test your connection on line up the semi-circle on the rim of the lid with the three seconds. Button, the LED will blink blue. If it blinks red, your Panic When mounting on drywall, pre-drill the process process completes the next page.) “open” semi-circle on the base. Twist the lid clockwise Button cannot signal your Base Station. Try the test holes and insert the included anchors. Having trouble with your Panic Button? If the Panic Button does not pair successfully, the LED to lock it in. Blue LED lights up Paired ring glows red. To try the pairing process again, remove Preventing false alarms. again. You may find that repositioning the Panic Button If your Panic Button stops working or will not connect successfully for 3 seconds and reinstall the battery inside the Panic Button. (even just a few inches) can improve reception. (even with a good battery), try a factory reset. Wherever you put your Panic Button, just be sure Pairing If it still cannot connect, try installing unsuccessful/ Red LED lights up to place it somewhere that it won’t be triggered a Ring Range Extender between the To do this, press and hold the Setup button for 10 Device for 3 seconds seconds. When the LED ring stops blinking, your Panic removed accidentally, especially out of reach of small Panic Button and your Base Station. children and pets. And don’t put it in a drawer - it ’s Button has reset. Device tampered 3 Red Blinks more likely to get pressed and trigger a false alarm. A factory reset disconnects the Panic Button from your Ring Alarm. To begin using the Panic For info on other LED patterns, visit ring.com/help. Button again, repeat the setup process in the Setup button © 2018 Ring LLC or its affiliates. Ring app. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 12/18/18 Ring_Panic_Button_manual.indd 18 12/18/18 8:40 AM


Document Created: 2018-12-19 14:17:57
Document Modified: 2018-12-19 14:17:57
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC