MPE Calculation

FCC ID: XPYTOBYL280

RF Exposure Info

Download: PDF
FCCID_2664012

RF Exposure and Maximum ERP/EIRP Assessment For TOBY-L280 GSM/UMTS/HSPA/LTE Data Module FCC ID XPYTOBYL280 Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Test Laboratory: 7Layers AG Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7 layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Peter Mertel USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H. Ansorge TAX No. 147/5869/0385 www.7Layers.com A Bureau Veritas Group Company

Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 1 Administrative Data 4 1.1 Testing Laboratory 4 1.2 Project Data 4 1.3 Applicant Data 4 1.4 Manufacturer Data 4 2 Test object Data 5 2.1 General EUT Description 5 2.2 EUT Main components 5 2.3 Ancillary Equipment 5 2.4 Auxiliary Equipment 6 2.5 Operating Modes 7 3 Evaluation Results 8 3.1 Maximum ERP / EIRP 8 3.2 RF Exposure Evaluation for Module 9 3.3 RF Exposure Evaluation for multiple transmitters in co-location 11 Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 2 of 16

1layers fi testing for a smarter world 0 Summary O.1 Technical Report Summary Type of Report RF Exposure and Maximum ERP/EIRP Assessment for a UMTS/LTE radio module. Including RF Exposure for use with co—located radios on generic host device. Applicable FCC Rules For RF Exposure: OET Bulletin 65 Edition 97—01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS—102 Issue 4 — March 2010 For Maximum ERP/EIRP: FCC 47 CFR §22.913 IC SRSP—503 Issue 7, September 2008 FCC 47 CFR §24.232 IC SRSP—510 Issue 5, February 2009 FCC 47 CFR §27.50(d) RSS—139, Issue 2 / SRSP—513 Report version control Version Version Release date Changes validity 000 29.05.2015 Initial version Not Valid WLAN and BT Seq/Slin values updated, 001 15.06.2015 calculation updated Not valid 002 29.06.2015 Conclusion updated Not Valid 003 30.06.2015 Calculation updated Not Valid 004 01.07.2015 EUT main components updated Valid Responsible for Accreditation Scope: Responsible for Report: \\‘ ( L Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 3 of 16

1 Administrative Data 1.1 Testing Laboratory Company Name: 7Layers AG Address Borsigstr. 11 40880 Ratingen Germany This facility has been fully described in a report submitted to the FCC and accepted under the registration number 96716. The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D-PL-12140-01-01 Responsible for Accreditation Scope: Dipl.-Ing. Bernhard Retka Dipl.-Ing. Robert Machulec Dipl.-Ing. Andreas Petz Dipl.-Ing. Marco Kullik Report Template Version: 2014-05-15 1.2 Project Data Responsible for assessment and report: Mr. Andreas Tübel Date of Report: 2015-05-29 1.3 Applicant Data Company Name: u-blox AG Address: Zürcherstrasse 68, CH-8800 Thalwil Switzerland Contact Person: Giulio Comar 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 4 of 16

2 Test object Data 2.1 General EUT Description Equipment under Test GSM/UMTS/HSPA/LTE Data Module Type Designation: TOBY-L280 Kind of Device: GPRS/EDGE MSC UMTS/LTE Data Module GPRS Multi-slot class 12 FCC ID: XPYTOBYL280 IC Number: 8595A-TOBYL280 General product description: The EUT is Cellular radio module supporting GSM/WCDMA/HSDPA/HSUPA/LTE 2.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment Type Serial No. HW Status SW Status under Test Designation EUT A (Code: GSM/UMTS TOBY-L280 358503060011765 217001 09.90 DE1015016aa01) LTE Module EUT G (Code: GSM/UMTS TOBY-L280 358503060012011 217001 09.90 DE1015016ag01) LTE Module NOTE: The short description is used to simplify the identification of the EUT in this test report. 2.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Ancillary Equipment can influence the test results. Short Equipment Type HW Status SW Status Serial no. FCC ID Description under Test Designation AE 1 AC/DC UUX324- - - E09- – converter 1215 0291981 AE 2 Evaluation EVB-WL3 NO_EVK_CS - - - test board _191A00 Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 5 of 16

2.4 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Auxiliary Equipment can influence the test results. Short Equipment Type Serial no. HW Status SW Status FCC ID Description under Test Designation N/A – Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 6 of 16

2.5 Operating Modes This chapter describes the operating modes of the EUTs used for testing. Op. Mode Description of Operating Modes Remarks Op-mode 1 EUT transmitting in standalone configuration Antenna-to-person distance > 20cm Op-mode 2 EUT transmitting in the GSM 850 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio. Op-mode 3 EUT transmitting in the GSM 1900 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio. Op-mode 4 EUT transmitting in the GSM 850 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic WLAN radio. Op-mode 5 EUT transmitting in the GSM 1900 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic WLAN radio. Op-mode 6 EUT transmitting in the GSM 850 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio and WLAN radio. Op-mode 7 EUT transmitting in the GSM 1900 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio and WLAN radio. Op-mode 18 EUT transmitting in the FDD 7 Band simultaneously Antenna-to-person distance > 20cm with a generic Bluetooth radio. Op-mode 19 EUT transmitting in the FDD 7 Band simultaneously Antenna-to-person distance > 20cm with a generic WLAN radio. Op-mode 20 EUT transmitting in the FDD 7 Band simultaneously Antenna-to-person distance > 20cm with a generic Bluetooth radio and WLAN radio. Op-mode 21 EUT transmitting in the FDD 5 Band simultaneously Antenna-to-person distance > 20cm with a generic Bluetooth radio. Op-mode 22 EUT transmitting in the FDD 2 Band simultaneously Antenna-to-person distance > 20cm with a generic WLAN radio. Op-mode 23 EUT transmitting in the FDD 5 Band simultaneously Antenna-to-person distance > 20cm with a generic Bluetooth radio and WLAN radio. Op-mode 24 EUT transmitting in the FDD 5 Band simultaneously Antenna-to-person distance > 20cm with a generic Bluetooth radio. Op-mode 25 EUT transmitting in the FDD 5 Band simultaneously Antenna-to-person distance > 20cm with a generic WLAN radio. Op-mode 26 EUT transmitting in the FDD 2 Band simultaneously Antenna-to-person distance > 20cm with a generic Bluetooth radio and WLAN radio. Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 7 of 16

3 Evaluation Results 3.1 Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 (850MHZ GSM/GPRS) (FDD5 WCDMA/HSUPA/HSDPA/LTE) IC RSS-132, Issue 3 FCC 47 CFR §24.232 (1900MHZ GSM/GPRS) (FDD2 WCDMA/HSUPA/HSDPA/LTE) IC RSS-133 Issue 6 FCC 47 CFR §27.50(d) (FDD4,7,17 UMTS/LTE) RSS-139, Issue 2 / SRSP-513 3.1.1 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP-503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7 Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent ERIP value of 11.5 Watts. For all other limits, refer to the values stipulated in the corresponding tables. 3.1.2 Test Protocol Maximum Maximum Conducted Maximum antenna output Conducted Freq of FCC / IC gain to Duty power output highest EIRP limit meet EIRP Band Mode Cycle (%) Frequency (MHZ) (dBm) power (mW) power (mW) Limit (dBi) 850 GSM 50.0% 836.2 - 848.8 32.42 1745.822153 848.80 11484 8.2 1900 GSM 50.0% 1850.2 - 1909.8 29.63 918.3325965 1909.80 2000 3.4 FDD 2 UMTS 100.0% 1850 - 1907.6 22.34 171.3957308 1907.60 2000 10.7 FDD 5 UMTS 100.0% 824 - 846.6 22.54 179.4733627 836.00 11484 18.1 eFDD 5 LTE 100.0% 824 - 849 23.21 209.4112456 825.50 11484 17.4 eFDD 7 LTE 100.0% 2500-2570 22.2 165.9586907 2567.50 2000 10.8 3.1.3 Conclusion All gains in (dBi) Max gain to be Max gain to be Max gain to be Maximum gain to used to comply Band used to comply used to comply be compliant with with FCC MPE with EIRP Limits with IC MPE Limits all limits Limits 850 8.2 4.3 1.0 1.0 1900 3.4 9.8 6.4 3.4 FDD 2 10.7 12.5 9.1 9.1 FDD 5 18.1 10.0 6.7 6.7 eFDD 5 17.4 10.4 7.1 7.1 eFDD 7 10.8 13.0 10.5 10.5 Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 8 of 16

3.2 RF Exposure Evaluation for Module Standards OET Bulletin 65 Edition 97-01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS-102 Issue 5 – March 2015 3.2.1 Test limits As specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure. Frequency range (MHz) Power density (mW/cm²) 300 – 1,500 f/1500 1,500 – 100,000 1.0 Limits specified per RSS-102, Issue 5. Frequency range (MHz) Power density (W/m²) Power density (mW/cm²) 300 – 6000 0.02619 f0.6834 mW/cm² = W/m² * 0.1 Equation OET bulletin 65, page 18, edition 97-01: Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 9 of 16

3.2.2 Test Protocol Maximum antenna gain to comply with MPE limits for FCC Maximum Maximum Maximum Equivalent antenna Conducted Conducted conducted gain to output output output meet Separation Duty Frequency power power power MPE Limit MPE Limit distance Band Mode Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) (dBi) (cm) 850 GSM / GPRS 50% 848.8 33.25 2113.49 1056.82 0.5659 4.3 20 1900 GSM / GPRS 50% 1909.8 30.2 1047.13 523.60 1.0000 9.8 20 FDD 2 UMTS 100.0% 1907.6 24.5 281.84 281.84 1.0000 12.5 20 FDD 5 UMTS 100.0% 836.0 24.5 281.84 281.84 0.5573 10.0 20 eFDD 5 LTE 100.0% 825.5 24 251.19 251.19 0.5503 10.4 20 eFDD 7 LTE 100.0% 2567.5 24 251.19 251.19 1.0000 13.0 20 * Conducted output power values bases on “Tune-up” information provided by manufacturer. Maximum antenna gain to comply with MPE limits for Industry Canada Maximum Maximum Maximum Equivalent antenna Conducted Conducted conducted gain to output output output meet Separation Duty Frequency power power power MPE Limit MPE Limit distance Band Mode Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) (dBi) (cm) 850 GSM / GPRS 50% 848.8 33.3 2113.49 1056.82 0.2628 1.0 20 1900 GSM / GPRS 50% 1909.8 30.2 1047.13 523.60 0.4575 6.4 20 FDD 2 UMTS 100.0% 1907.6 24.5 281.84 281.84 0.4571 9.1 20 FDD 5 UMTS 100.0% 836.0 24.5 281.84 281.84 0.2601 6.7 20 eFDD 5 LTE 100.0% 825.5 24.0 251.19 251.19 0.2579 7.1 20 eFDD 7 LTE 100.0% 2567.5 24.0 251.19 251.19 0.5600 10.5 20 * Conducted output power values bases on “Tune-up” information provided by manufacturer. 3.2.3 Conclusion Max gain Maximum gain Max gain for for to be Band FCC MPE Industry compliant with Limits Canada all MPE limits MPE Limits 850 4.3 1.0 1.0 1900 9.8 6.4 6.4 FDD 2 12.5 9.1 9.1 FDD 5 10.0 6.7 6.7 eFDD 5 10.4 7.1 7.1 eFDD 7 13.0 10.5 10.5 Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 10 of 16

3.3 RF Exposure Evaluation for multiple transmitters in co-location Standards OET Bulletin 65 Edition 97-01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS-102 Issue 5 – March 2015 3.3.1 Co-Location Considerations The calculation below is used to consider situations in which simultaneous exposure to fields of different frequencies occur. The calculation is performed by the sum of each relative exposure for each equipment according to the following criteria. Where: Seq is the power density of the electromagnetic field at a given distance by a specific transmitter and a defined frequency. Slin is the MPE limit for the frequency being evaluated. 3.3.2 Assumptions 1. Primary transmitter does not support power reduction for multiple time slots on the uplink. 2. Antenna separation from module to human body is ≥ 20cm. 3. Separation distance between co-located transmitting antennas is 0cm. 4. Hypothetical Bluetooth radio is assumed to have an output power of 9.5dBm and an antenna gain of 4dBi. 5. Hypothetical WLAN radio is assumed to have an output power of 19dBm and an antenna gain of 5dBi. 3.3.3 Test Protocol The below table is to determine the MPE values using the maximum gain values obtained in section 3.3.4 of this document. OP mode-1 – FOR FCC ONLY Maximum Equivalent Conducted conducted MPE output output Value Separation Duty Frequency power power MPE Limit using distance Band Mode Cycle (MHZ) (dBm) (mW) (mW/cm²) Max gain (cm) Verdict 850 GSM / GPRS 50% 848.8 33.25 1056.82 0.5659 0.5342 20 Pass 1900 GSM / GPRS 50% 1909.8 30.2 523.60 1.0000 0.2279 20 Pass FDD 2 UMTS 100.0% 1907.6 24.5 281.84 1.0000 0.6588 20 Pass FDD 5 UMTS 100.0% 836.0 24.5 281.84 0.5573 0.5233 20 Pass eFDD 5 LTE 100.0% 825.5 24 251.19 0.5503 0.4664 20 Pass eFDD 7 LTE 100.0% 2567.5 24 251.19 1.0000 0.6008 20 Pass * Conducted output power values bases on “Tune-up” information provided by manufacturer. Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 11 of 16

OP mode-1 – FOR Industry Canada ONLY Maximum Equivalent Conducted conducted MPE output output Value Separation Duty Frequency power power MPE Limit using distance Band Mode Cycle (MHZ) (dBm) (mW) (mW/cm²) Max gain (cm) Verdict 850 GSM / GPRS 50% 848.8 33.25 1056.82 0.2628 0.2359 20 PASS 1900 GSM / GPRS 50% 1909.8 30.2 523.60 0.4575 0.2279 20 PASS FDD 2 UMTS 100.0% 1907.6 24.5 281.84 0.4571 0.4062 20 PASS FDD 5 UMTS 100.0% 836.0 24.5 281.84 0.2601 0.2337 20 PASS eFDD 5 LTE 100.0% 825.5 24 251.19 0.2579 0.2083 20 PASS eFDD 7 LTE 100.0% 2567.5 24 251.19 0.5600 0.4997 20 PASS MPE Values for the generic Bluetooth and WLAN radios operating alone. These values are used to calculate the relative exposure for simultaneous transmission with the primary transmitter. MPE Calculation for Single Transmitter installed in Generic host for FCC ERP Separation Duty Equivalent MPE Limit Maximum Power distance Radio type Cycle ERP (mW) (mW) (mW/cm²) antenna gain density (cm) Verdict Bluetooth 64% 8.91 3.72 1.0000 4.0 0.0019 20 Pass WLAN 100% 79.43 79.43 1.0000 5.0 0.0500 20 Pass MPE Calculation for Single Transmitter installed in Generic host for Industry Canada ERP Separation Duty Equivalent MPE Limit Maximum Power distance Radio type Cycle ERP (mW) (mW) (mW/cm²) antenna gain density (cm) Verdict Bluetooth 64% 8.91 3.72 0.54 4.00 0.0019 20.00 Pass WLAN 100% 79.43 79.43 0.54 5.00 0.0500 20.00 Pass Below are the relative exposure values for the primary, secondary and combined primary + secondary transmitters for both FCC and Industry Canada limits. OP mode-1 Relative exposure for Primary Transmitter for FCC Seq Output ---------- OP-Mode Mode power Frequency (MHZ) Seq Slin (mW/cm²) SLin Verdict 850 GSM / GPRS 1056.8175 848.8 0.5342 0.5659 0.94409653 Pass 1900 GSM / GPRS 523.6004 1909.8 0.2279 1.0000 0.22789275 Pass FDD 2 UMTS 281.8383 1907.6 0.6588 1.0000 0.65876499 Pass FDD 5 UMTS 281.8383 836.0 0.5233 0.5573 0.93889169 Pass eFDD 5 LTE 251.1886 825.5 0.4664 0.5503 0.84743168 Pass eFDD 7 LTE 251.1886 2567.5 0.6008 1.0000 0.60080081 Pass Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 12 of 16

Relative exposure for Primary Transmitter for Industry Canada Seq Output ---------- OP-Mode Mode power Frequency (MHZ) Seq Slin (mW/cm²) SLin Verdict 850 GSM / GPRS 1056.8175 848.8 0.2359 0.2628 0.897530927 Pass 1900 GSM / GPRS 523.6004 1909.8 0.2279 0.4575 0.498158895 Pass FDD 2 UMTS 281.8383 1907.6 0.4062 0.4571 0.888607517 Pass FDD 5 UMTS 281.8383 836.0 0.2337 0.2601 0.898585162 Pass eFDD 5 LTE 251.1886 825.5 0.2083 0.2579 0.807812487 Pass eFDD 7 LTE 251.1886 2567.5 0.3011 0.5600 0.53769447 Pass Relative exposure for Secondary transmitter for FCC OP-Mode Transmitter Output Seq (mW/cm²) Slin (mW/cm²) Seq power ---------- SLin 2 Bluetooth 3.72 0.0019 1.0000 0.001856652 3 WLAN 79.43 0.0500 1.0000 0.049972435 4 Bluetooth 3.72 0.0019 1.0000 0.001856652 WLAN 79.43 0.0500 1.0000 0.049972435 Relative exposure for Secondary transmitter for Industry Canada OP-Mode Transmitter Output Seq (mW/cm²) Slin (mW/cm²) Seq power ---------- SLin 2 Bluetooth 3.72 0.0019 0.5410 0.003431873 3 WLAN 79.43 0.0500 0.5410 0.092370053 4 Bluetooth 3.72 0.0019 0.5410 0.003431873 WLAN 79.43 0.0500 0.5410 0.092370053 Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 13 of 16

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for FCC Compliance Maximum Maximum Maximum (Spri/Slim_pri) Frequency Spri/Slim_pri + + (Ssec / OP-Mode Transmitter (MHZ) Seq / SLin Ssec / Slin_Sec Slin_Sec) < 1 Bluetooth 2441 0.0019 1 TOBY L201 848.8 0.9441 0.9460 Compliant Bluetooth 2441 0.0019 2 TOBY L201 1909.8 0.2279 0.2297 Compliant WLAN 2437 0.0500 3 TOBY L201 848.8 0.9441 0.9941 Compliant WLAN 2437 0.0500 4 TOBY L201 1909.8 0.2279 0.2779 Compliant Bluetooth 2441 0.0019 5 WLAN 2437 0.0500 TOBY L201 848.8 0.9441 0.9959 Compliant 6 Bluetooth 2441 0.0019 WLAN 2437 0.0500 7 TOBY L201 1909.8 0.2279 0.2797 Compliant Bluetooth 2441 0.0034 18 TOBY L201 2567.5 0.6008 0.6042 Compliant WLAN 2437 0.0500 19 TOBY L201 2567.5 0.6008 0.6508 Compliant Bluetooth 2441 0.0019 WLAN 2437 0.0500 20 TOBY L201 2567.5 0.6008 0.6526 Compliant Bluetooth 2441 0.0034 21 TOBY L201 836 0.8966 0.9407 Compliant Bluetooth 2441 0.0034 22 TOBY L201 1907.6 0.6588 0.6606 Compliant WLAN 2437 0.0924 23 TOBY L201 836 0.8966 0.9889 Compliant WLAN 2437 0.0924 24 TOBY L201 1907.6 0.6588 0.7087 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 25 TOBY L201 836 0.8966 0.9907 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 26 TOBY L201 1907.6 0.6588 0.7106 Compliant Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 14 of 16

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for Industry Canada Compliance Maximum Maximum Maximum (Spri/Slim_pri) + Frequency Spri/Slim_pri + (Ssec / Slin_Sec) OP-Mode Transmitter (MHZ) Seq / SLin Ssec / Slin_Sec <1 Bluetooth 2441 0.0034 1 TOBY L201 848.8 0.8975 0.9010 Compliant Bluetooth 2441 0.0034 2 TOBY L201 1908.8 0.4982 0.5016 Compliant WLAN 2437 0.0924 3 TOBY L201 848.8 0.8975 0.9899 Compliant WLAN 2437 0.0924 4 TOBY L201 1909.8 0.4982 0.5905 Compliant Bluetooth 2441 0.0034 5 WLAN 2437 0.0924 TOBY L201 848.8 0.8975 0.9933 Compliant 6 Bluetooth 2441 0.0034 WLAN 2437 0.0924 7 TOBY L201 1909.8 0.4982 0.5940 Compliant Bluetooth 2441 0.0034 18 TOBY L201 2567.5 0.8924 0.8958 Compliant WLAN 2437 0.0924 19 TOBY L201 2567.5 0.8924 0.9847 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 20 TOBY L201 2567.5 0.8924 0.9882 Compliant Bluetooth 2441 0.0034 21 TOBY L201 836 0.8986 0.9020 Compliant Bluetooth 2441 0.0034 22 TOBY L201 1907.6 0.8886 0.8920 Compliant WLAN 2437 0.0924 23 TOBY L201 836 0.8986 0.9910 Compliant WLAN 2437 0.0924 24 TOBY L201 1907.6 0.8886 0.9810 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 25 TOBY L201 836 0.8986 0.9944 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 26 TOBY L201 1907.6 0.8886 0.9844 Compliant Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 15 of 16

When operating the primary transmitter simultaneously with a generic Bluetooth and WLAN radio, the following antenna gains can be used with the module TOBY-L201 while still complying with the exposure limits. Band dBi (For FCC) dBi (For Industry Canada) 850 4.05 0.5 1900 3.4 3.4 FDD 5 9.7 6.2 FDD 2 10.7 8.6 FDD 7 10.8 10.0 Assessment Reference: MDE_UBLOX_1510_MPEa rev4 Page 16 of 16


Document Created: 2015-07-01 17:14:47
Document Modified: 2015-07-01 17:14:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC