Test Report

FCC ID: XPYTOBYL201

Test Report

Download: PDF
FCCID_2644995

Final Report on TOBY-L201 Data Module FCC ID XPYTOBYL201 IC: 8595A-TOBYL201 Report Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Date: May 21, 2015 Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Peter Mertel USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H. Ansorge TAX No. 147/5869/0385 www.7Layers.com

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 1 Administrative Data 1.1 Project Data Project Responsible: Andreas Tübel Date Of Test Report: 2015/05/21 Date of first test: 2015/04/01 Date of last test: 2015/04/04 1.2 Applicant Data Company Name: u-blox AG Street: Zürcherstrasse 68, CH-8800 Thalwil Country: Switzerland Contact Person: Giulio Comar Function: Wireless Products Certification Department: Wireless R&D center Phone: +41 44 722 7462 Fax: +41 44 722 7447 E-Mail: giulio.comar@u-blox.com 1.3 Test Laboratory Data The following list shows all places and laboratories involved for test result generation: 7 layers DE Company Name : 7 layers AG Street : Borsigstrasse 11 City : 40880 Ratingen Country : Germany Contact Person : Mr. Michael Albert Phone : +49 2102 749 201 Fax : +49 2102 749 444 E Mail : Michael.Albert@7Layers.com Laboratory Details Lab ID Identification Responsible Accreditation Info Lab 1 Conducted Emissions Mr. Andreas Petz DAkkS-Registration no. D-PL-12140-01-01 Mr. Wolfgang Richter Lab 2 Radiated Emissions Mr. Marco Kullik DAkkS-Registration no. D-PL-12140-01-01 Mr. Robert Machulec Page 2 of 27

layers testing for a smarter world Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 1.4 Signature of the Testing Responsible y mA fe / Imad Hije ( \_.." responsible for tests performed 1Ln’ Lab 1, Lab 2 1.5 Signature of the Accreditation Responsible @ | W [ggerka] Accreditation scope responsible person responsible for Lab 1, Lab 2 2 Test Object Data 2.1 General OUT Description The following section lists all OUTs (Object‘s Under Test) involved during testing. OUT: TOBY—L201 Data Module Type / Model / Family: TOBY—L201 Data Module FCC ID XPYTOBYL201 K: 8595A—TOBYL201 Product Category: Module Manufacturer: Company Name: Please see applicant data Contact Person: = Parameter List: Parameter name Value Page 3 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 2.2 Detailed Description of OUT Samples Sample : ae02 OUT Identifier TOBY-L201 Sample Description Standard for FCC and RSE Serial No. 358502060012930 HW Status 218A02 SW Status 09.82 Date of Receipt 2015/03/05 Low Voltage 3.3 V Low Temp. -20 °C High Voltage 4.4 V High Temp. 55 °C Nominal Voltage 3.8 V Normal Temp. 25 °C 2.3 OUT Features Features for OUT: TOBY-L201 Designation Description Allowed Values Supported Value(s) Features for scope: FCC_v2 AC The OUT is powered by or connected to AC Mains Dant removable antenna supplied and type tested with the radio equipment, designed as an example part of the equipment FDD2 EUT supports UMTS FDD2 in the band 1850 MHz - 1910 MHz FDD5 EUT supports UMTS FDD5 in the band 824 MHz - 849 MHz HSDPA- EUT supports UMTS FDD2 HSDPA in the band FDD2 1850 MHz - 1910 MHz HSDPA- EUT supports UMTS FDD5 HSDPA in the band FDD5 824 MHz - 849 MHz HSUPA- EUT supports UMTS FDD2 HSUPA in the band FDD2 1850 MHz - 1910 MHz HSUPA- EUT supports UMTS FDD5 HSUPA in the band FDD5 824 MHz - 849 MHz PantC permanent fixed antenna connector, which may be built-in, designed as an indispensable part of the equipment Page 4 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 2.4 Auxiliary Equipment AE No. Type Designation Serial No. HW Status SW Status Description AE AE01 Adapter Board AE AE02 Interface Board AE 02 Fujitsu LIFEBOOK E DSCK013817 Laptop RE Series E781 AE 01 LG L17NB-3 504WAHS3J881 EMC TFT 1 AE 04 Logitech M-BT58 HC60915A2XC Mouse 1 AE 05 Logitech Ultrax Media ST635J01624 Keyboard Keyboard AE 03 SED100P2-19.0 07Y17323A AC Adapter 2 Laptop RE AE AE04 UTRA/E-UTRA External Antenna Aux AE AE03 UTRA/E-UTRA External Antenna Main AE AE05 UUX324-1215 E01-0103700 120V/60HZ AC AC/DC Adapter 2.5 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Setup No. List of OUT samples List of auxiliary equipment Sample No. Sample Description AE No. AE Description S01_AE02 (FCC Sample) Sample: ae02 Standard for FCC and AE AE01 Adapter Board RSE AE AE02 Interface Board AE 02 Laptop RE AE 01 EMC TFT 1 AE 04 Mouse 1 AE 05 Keyboard AE 03 AC Adapter 2 Laptop RE AE AE04 External Antenna Aux AE AE03 External Antenna Main AE AE05 AC/DC Adapter Page 5 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 3 Results 3.1 General Documentation of tested Available at the test laboratory. devices: Interpretation of the The results of the inspection are described on the following test results: pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Note: 1. All tests are performed under environmental conditions within the requirements of the specifications. Environmental conditions are available at the laboratory. 2. The current HW and SW versions of the module are: HW 218A03 SW 09.87. The tests were performed with an older SW and HW version, see DUT description. According to the information provided by the applicant, changes have only been made to Hard- and Software related to bands not covered by this report, so no additional testing was performed 3.2 List of the Applicable Body (Body for Scope: FCC_v2) Designation Description FCC47CFRChIPART15bRADIO Part 15, Subpart B - Unintentional Radiators FREQUENCY DEVICES 3.3 List of Test Specification Test Specification: FCC part 2 and 15 Version 10-1-13 Edition Title: PART 2 - GENERAL RULES AND REGULATIONS PART 15 - RADIO FREQUENCY DEVICES Page 6 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 3.4 Summary Test Case Identifier / Name Lab Test (condition) Result Date of Test Ref. Setup 15b.1 Conducted Emissions (AC Power Line) §15.107 15b.1; Mode = Generating a high power Passed 2015/04/04 Lab 1 S01_AE02 consumption 15b.2 Spurious Radiated Emissions §15.109 15b.2; Mode = Generating a high power Passed 2015/04/01 Lab 2 S01_AE02 consumption Page 7 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 3.5 Detailed Results 3.5.1 15b.1 Conducted Emissions (AC Power Line) §15.107 Test: 15b.1; Mode = Generating a high power consumption Result: Passed Setup No.: S01_AE02 Date of Test: 2015/04/04 17:30 Body: FCC47CFRChIPART15bRADIO FREQUENCY DEVICES Test Specification: FCC part 2 and 15 Page 8 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Detailed Results: AC MAINS CONDUCTED EUT: (DE1015014ae02) Manufacturer: UBLOX Operating Condition: GSM 850 TCH190, USB traffic, computer peripheral; 120V/60Hz Test Site: 7 layers Ratingen Operator: URO Test Specification: ANSI C63.4; FCC 15.107 / 15.207 Comment: Class B Start of Test: 04.04.2015 / 17:42:26 SCAN TABLE: "FCC Voltage" Short Description: FCC Voltage Start Stop Step Detector Meas. IF Transducer Frequency Frequency Width Time Bandw. 150.0 kHz 30.0 MHz 5.0 kHz MaxPeak 20.0 ms 9 kHz ESH3-Z5 Average Level [dBµV] 80 70 60 50 x 40 + 30 20 10 0 150k 300k 500k 1M 2M 3M 5M 7M 10M 30M Frequency [Hz] x MES UBL_1502_002_fin QP + MES UBL_1502_002_fin AV MES UBL_1502_002_pre PK MES UBL_1502_002_pre AV LIM FCC 15b QP volt Voltage QP Limit LIM FCC 15b AV volt Voltage QP Limit Page 9 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B MEASUREMENT RESULT: "UBL_1502_002_fin QP" 04.04.2015 17:51 Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.445000 42.60 10.1 57 14.3 N GND MEASUREMENT RESULT: "UBL_1502_002_fin AV" 04.04.2015 17:51 Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.440000 32.30 10.1 47 14.8 N FLO Page 10 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 3.5.2 15b.2 Spurious Radiated Emissions §15.109 Test: 15b.2; Mode = Generating a high power consumption Result: Passed Setup No.: S01_AE02 Date of Test: 2015/04/01 16:00 Body: FCC47CFRChIPART15bRADIO FREQUENCY DEVICES Test Specification: FCC part 2 and 15 Page 11 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Detailed Results: EMI RADIATED TEST EUT: (DE1015014ae02 ) Manufacturer: UBLOX Operating Condition: FDD2 TCH 9400; USB traffic; computer peripheral; 120V/60Hz Test Site: 7 layers, Ratingen Operator: MIT/DOE Test Specification: FCC Part 15 B Class B Comment: Horizontal EUT position, Horizontal+Vertical antenna polaris Start of Test: 31.03.2015 / 16:34:30 SCAN TABLE: "FCC part 15 b" Short Description: FCC part 15 b Start Stop Step Detector Meas. IF Transducer Frequency Frequency Width Time Bandw. 30.0 MHz 1.0 GHz 60.0 kHz MaxPeak 1.0 ms 120 kHz HL562 Level [dBµV/m] 80 70 60 50 40 x x x x x x xx 30 x 20 x 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Frequency [Hz] x MES UBL_1502_001_fin QP MES UBL_1502_001_pre PK LIM FCC ClassB F QP/AV FCC ClassB, field strength Page 12 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B MEASUREMENT RESULT: "UBL_1502_001_fin QP" 31.03.2015 17:27 Frequency Level Transd Limit Margin Height Azimuth Polarisation MHz dBµV/m dB dBµV/m dB cm deg 30.420000 32.40 20.9 40.0 7.6 118.0 157.00 VERTICAL 41.700000 36.70 14.9 40.0 3.3 100.0 157.00 VERTICAL 45.900000 37.10 12.4 40.0 2.9 104.0 264.00 VERTICAL 78.840000 20.20 10.4 40.0 19.8 122.0 323.00 VERTICAL 143.100000 35.50 10.5 43.5 8.0 100.0 9.00 VERTICAL 144.480000 32.20 10.4 43.5 11.3 100.0 0.00 VERTICAL 385.140000 32.90 15.1 46.0 13.1 103.0 333.00 HORIZONTAL 386.040000 29.70 15.1 46.0 16.3 125.0 10.00 HORIZONTAL 486.900000 33.40 17.2 46.0 12.6 100.0 22.00 VERTICAL 488.220000 32.00 17.2 46.0 14.0 100.0 22.00 VERTICAL Page 13 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 4 Test Equipment Details 4.1 List of Used Test Equipment The calibration, hardware and software states are shown for the testing period. Test Equipment Anechoic Chamber Lab ID: Lab 2 Manufacturer: Frankonia Description: Anechoic Chamber for radiated testing Type: 10.58x6.38x6.00 m³ Calibration Details Last Execution Next Execution NSA (FCC) 2014/01/09 2017/01/09 Single Devices for Anechoic Chamber Single Device Name Type Serial Number Manufacturer Air compressor none - Atlas Copco Anechoic Chamber 10.58 x 6.38 x 6.00 m³ none Frankonia Calibration Details Last Execution Next Execution FCC listing 96716 3m Part15/18 2014/01/09 2017/01/08 Controller Maturo MCU 961208 Maturo GmbH EMC camera CE-CAM/1 - CE-SYS EMC camera Nr.2 CCD-400E 0005033 Mitsubishi Filter ISDN B84312-C110-E1 Siemens&Matsushita Filter Universal 1A BB4312-C30-H3 - Siemens&Matsushita Page 14 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Test Equipment Auxiliary Equipment for Conducted emissions Lab ID: Lab 1 Manufacturer: Rohde & Schwarz GmbH & Co.KG Description: EMI Conducted Auxiliary Equipment Single Devices for Auxiliary Equipment for Conducted emissions Single Device Name Type Serial Number Manufacturer Cable "LISN to ESI" RG214 W18.03+W48.03 Huber&Suhner Impedance ISN T800 36159 Teseq GmbH Stabilization Network Calibration Details Last Execution Next Execution Standard Calibration 2014/02/06 2016/02/28 Impedance ISN/CDN ENY41 100002 Rohde & Schwarz GmbH & Stabilization Network, Co. KG Coupling Decoupling Network Impedance ISN/CDN ST08 36292 Teseq GmbH Stabilization Network, Coupling Decoupling Network Calibration Details Last Execution Next Execution Standard calibration 2014/01/10 2016/01/31 Impedance ISN/CDN T8-Cat6 32187 Teseq GmbH Stabilization Network, Coupling Decoupling Network Calibration Details Last Execution Next Execution Standard Calibration 2014/01/08 2016/01/31 One-Line V-Network ESH 3-Z6 100489 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution standard calibration 2014/06/18 2017/11/30 One-Line V-Network ESH 3-Z6 100570 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard Calibration 2013/11/25 2016/11/24 Two-Line V-Network ESH 3-Z5 828304/029 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution DAkkS Calibration 2015/03/30 2017/03/31 Two-Line V-Network ESH 3-Z5 829996/002 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution DAkks Calibration 2015/03/30 2017/03/31 Page 15 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Test Equipment Auxiliary Equipment for Radiated emissions Lab ID: Lab 2 Description: Equipment for emission measurements Serial Number: see single devices Single Devices for Auxiliary Equipment for Radiated emissions Single Device Name Type Serial Number Manufacturer Antenna mast AM 4.0 AM4.0/180/11920 Maturo GmbH 513 Biconical Broadband SBA 9119 9119-005 Schwarzbeck Antenna Biconical dipole VUBA 9117 9117-108 Schwarzbeck Broadband Amplifier JS4-18002600-32-5P 849785 Miteq 18MHz-26GHz Broadband Amplifier AFS4-01000400-1Q-10P-4 - Miteq 1GHz-4GHz Broadband Amplifier JS4-00101800-35-5P 896037 Miteq 30MHz-18GHz Cable "ESI to EMI EcoFlex10 W18.01- Kabel Kusch Antenna" 2+W38.01-2 Cable "ESI to Horn UFB311A+UFB293C W18.02- Rosenberger Micro-Coax Antenna" 2+W38.02-2 Double-ridged horn HF 906 357357/001 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard Calibration 2012/05/18 2015/05/17 Double-ridged horn HF 906 357357/002 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard Calibration 2012/06/26 2015/06/25 High Pass Filter 4HC1600/12750-1.5-KK 9942011 Trilithic High Pass Filter 5HC2700/12750-1.5-KK 9942012 Trilithic High Pass Filter 5HC3500/12750-1.2-KK 200035008 Trilithic High Pass Filter WHKX 7.0/18G-8SS 09 Wainwright Horn Antenna BBHA 9170 BBHA9170262 Schwarzbeck 15-26 GHz BBHA 9170 Log.-per. Antenna HL 562 Ultralog 100609 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard Calibration 2012/12/18 2015/12/17 Log.-per. Antenna HL 562 Ultralog 830547/003 Rohde & Schwarz GmbH & Co. KG Loop Antenna HFH2-Z2 829324/006 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution DKD Calibration 2014/11/27 2017/11/27 Standard Gain / 3160-09 00083069 EMCO Elektronik GmbH Pyramidal Horn Antenna 26,5 GHz Page 16 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Single Devices for Auxiliary Equipment for Radiated emissions (continued) Single Device Name Type Serial Number Manufacturer Standard Gain / 3160-10 00086675 EMCO Elektronik GmbH Pyramidal Horn Antenna 40 GHz Tilt device Maturo Antrieb TD1.5-10kg TD1.5- Maturo GmbH (Rohacell) 10kg/024/379070 9 Test Equipment Auxiliary Test Equipment Lab ID: Lab 2 Manufacturer: see single devices Description: Single Devices for various Test Equipment Type: various Serial Number: none Single Devices for Auxiliary Test Equipment Single Device Name Type Serial Number Manufacturer Broadband Power 1506A / 93459 LM390 Weinschel Associates Divider N (Aux) Broadband Power WA1515 A855 Weinschel Associates Divider SMA Digital Multimeter 03 Fluke 177 86670383 Fluke Europe B.V. (Multimeter) Calibration Details Last Execution Next Execution Customized calibration 2013/12/04 2015/12/03 Fibre optic link FO RS232 Link 181-018 Pontis Satellite (Aux) Fibre optic link FO RS232 Link 182-018 Pontis Transceiver (Aux) Isolating Transformer LTS 604 1888 Thalheimer Transformatorenwerke GmbH Notch Filter Ultra WRCA800/960-6EEK 24 Wainwright Stable (Aux) Signal Analyzer FSV30 103005 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard 2014/02/10 2016/02/09 Spectrum Analyser FSP3 836722/011 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard 2012/06/13 2015/06/12 Spectrum Analyser FSU26 200418 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Execution Standard calibration 2014/07/29 2015/07/28 Vector Signal SMIQ 03B 832492/061 Rohde & Schwarz GmbH & Generator Co.KG Page 17 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Test Equipment Digital Signalling Devices Lab ID: Lab 1, Lab 2 Description: Signalling equipment for various wireless technologies. Single Devices for Digital Signalling Devices Single Device Name Type Serial Number Manufacturer CMW500 CMW500 107500 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Execution Standard calibration 2014/01/27 2016/01/26 Digital Radio CMD 55 831050/020 Rohde & Schwarz GmbH & Communication Tester Co. KG Calibration Details Last Execution Next Execution DKD calibration 2014/12/02 2017/12/01 Universal Radio CMU 200 102366 Rohde & Schwarz GmbH & Communication Tester Co. KG HW/SW Status Date of Start Date of End Hardware: 2007/07/16 B11, B21V14, B21-2, B41, B52V14, B52-2, B53-2, B56V14, B68 3v04, PCMCIA, U65V04 Software: K21 4v21, K22 4v21, K23 4v21, K24 4v21, K42 4v21, K43 4v21, K53 4v21, K56 4v22, K57 4v22, K58 4v22, K59 4v22, K61 4v22, K62 4v22, K63 4v22, K64 4v22, K65 4v22, K66 4v22, K67 4v22, K68 4v22, K69 4v22 Firmware: µP1 8v50 02.05.06 --- Universal Radio CMU 200 837983/052 Rohde & Schwarz GmbH & Communication Tester Co. KG Calibration Details Last Execution Next Execution DKD calibration 2014/12/03 2017/12/02 HW/SW Status Date of Start Date of End HW options: 2007/01/02 B11, B21V14, B21-2, B41, B52V14, B52-2, B53-2, B54V14, B56V14, B68 3v04, B95, PCMCIA, U65V02 SW options: K21 4v11, K22 4v11, K23 4v11, K24 4v11, K27 4v10, K28 4v10, K42 4v11, K43 4v11, K53 4v10, K65 4v10, K66 4v10, K68 4v10, Firmware: µP1 8v40 01.12.05 --- SW: 2008/11/03 K62, K69 Vector Signal SMU200A 100912 Rohde & Schwarz GmbH & Generator Co. KG Page 18 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Test Equipment Emission measurement devices Lab ID: Lab 1, Lab 2 Description: Equipment for emission measurements Serial Number: see single devices Single Devices for Emission measurement devices Single Device Name Type Serial Number Manufacturer EMI Receiver / ESR 7 101424 Rohde & Schwarz Spectrum Analyser Calibration Details Last Execution Next Execution Initial Factory Calibration 2014/11/13 2016/11/12 Personal Computer Dell 30304832059 Dell Power Meter NRVD 828110/016 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Execution Standard calibration 2014/05/13 2015/05/10 Sensor Head A NRV-Z1 827753/005 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Execution Standard calibration 2014/05/13 2015/05/10 Signal Generator SMR 20 846834/008 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard Calibration 2014/06/24 2017/06/23 Spectrum Analyser FSW 43 103779 Rohde & Schwarz Calibration Details Last Execution Next Execution Initial Factory Calibration 2014/11/17 2016/11/16 Spectrum Analyzer ESIB 26 830482/004 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Execution Standard Calibration 2014/01/07 2016/01/31 HW/SW Status Date of Start Date of End Firmware-Update 4.34.4 from 3.45 during calibration 2009/12/03 Test Equipment Shielded Room 02 Lab ID: Lab 1 Manufacturer: Frankonia Description: Shielded Room for conducted testing Type: 12 qm Serial Number: none Page 19 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Test Equipment T/A Logger 13 Lab ID: Lab 1, Lab 2 Description: Lufft Opus10 TPR Type: Opus10 TPR Serial Number: 13936 Single Devices for T/A Logger 13 Single Device Name Type Serial Number Manufacturer ThermoAirpressure Opus10 TPR (8253.00) 13936 Lufft Mess- und Datalogger 13 Regeltechnik GmbH (Environ) Calibration Details Last Execution Next Execution Customized calibration 2015/02/27 2017/02/26 Test Equipment T/H Logger 02 Lab ID: Lab 1 Description: Lufft Opus10 Serial Number: 7489 Single Devices for T/H Logger 02 Single Device Name Type Serial Number Manufacturer ThermoHygro Opus10 THI (8152.00) 7489 Lufft Mess- und Datalogger 02 Regeltechnik GmbH (Environ) Calibration Details Last Execution Next Execution Customized calibration 2015/02/27 2017/02/26 Test Equipment T/H Logger 12 Lab ID: Lab 2 Description: Lufft Opus10 Serial Number: 12482 Single Devices for T/H Logger 12 Single Device Name Type Serial Number Manufacturer ThermoHygro Opus10 THI (8152.00) 12482 Lufft Mess- und Datalogger 12 Regeltechnik GmbH (Environ) Calibration Details Last Execution Next Execution Customized calibration 2015/03/10 2017/03/09 Page 20 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 5 Annex 5.1 Additional Information for Report Page 21 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B Test Description _____________ _______________________________ Conducted emissions (AC power line) _______________________________ Standard FCC Part 15 Subpart B The test was performed according to: ANSI C 63.4, 2009 Test Description The test set-up was made in accordance to the general provisions of ANSI C 63.4-2009. The Equipment Under Test (EUT) was setup in a shielded room to perform the conducted emissions measurements in a typical installation configuration. The EUT was connected to a 50 µH || 50 Ohm Line Impedance Stabilization Network (LISN), which meets the requirements of ANSI C63.4–2009, Annex B, in the frequency range of the measurements. The LISN’s unused connections were terminated with 50 Ohm loads. AC Power supply voltage for EUT: 120 V 60 Hz (if not stated within the measurement plot and/or test result). The measurement procedure consists of two steps. It is implemented into the EMI test software ES-K1 from R&S. Step 1: Preliminary scan Intention of this step is, to determine the conducted EMI-profile of the EUT. EMI receiver settings: - Detector: Peak - Maxhold - Frequency range: 150 kHz – 30 MHz - Frequency steps: 5 kHz - IF–Bandwidth: 9 kHz - Measuring time / Frequency step: 20 ms - Measurement on phase + neutral lines of the power cords On basis of this preliminary scan the highest amplitudes and the corresponding frequencies relative to the limit are identified. Emissions above the limit and emissions which are in the 10 dB range below the limit are considered. Step 2: Final measurement Intention of this step is, to determine the highest emissions with the settings defined in the test specification for the frequencies identified in step 1. EMI receiver settings: - Detector: Quasi-Peak - IF - Bandwidth: 9 kHz - Measuring time: 1 s / frequency At each frequency determined in step 1, four measurements are performed in the following combinations: 1) Neutral lead - reference ground (PE grounded) 2) Phase lead - reference ground (PE grounded) 3) Neutral lead - reference ground (PE floating) 4) Phase lead - reference ground (PE floating) The highest value is reported. Test Requirements / Limits If not stated within the measurement plot and/or test result, class B limits are applied. FCC Part 15, Subpart B, §15.107, Class B Limit Frequency Range (MHz) QP Limit (dBµV) AV Limit (dBµV) 0.15 – 0.5 66 to 56 56 to 46 0.5 – 5 56 46 5 – 30 60 50 Page 22 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B FCC Part 15, Subpart B, §15.107, Class A Limit Frequency Range (MHz) QP Limit (dBµV) AV Limit (dBµV) 0.15 - 0.5 79 66 0.5 – 30 73 60 Used conversion factor: Limit (dBµV) = 20 log (Limit (µV)/1µV). NOTES: A missing result table in the corresponding test report section means, that no final measurement was performed because no relevant frequencies (peaks) were found in the preliminary scan. The chosen operating mode is selected as representative mode to generate “worst-case” conditions, i.e. high power consumption. _______________________ Spurious radiated emissions _______________________ Standard FCC Part 15, Subpart B The test was performed according to: ANSI C 63.4, 2009 Test Description Measurement below 1 GHz: The test set-up was made in accordance to the general provisions of ANSI C 63.4-2009. The Equipment Under Test (EUT) was set up on a non-conductive table 1.0 x 2.0 m in the semi-anechoic chamber. The influence of the EUT support table that is used between 30–1000 MHz was evaluated. The test was performed at the distance of 3 m between the EUT and the receiving antenna. The measurement procedure is implemented into the EMI test software ES-K1 from R&S. The radiated emissions measurements were made in a typical installation configuration. Exploratory tests are performed at 3 orthogonal axes to determine the worst-case orientation of a body-worn or handheld EUT. The final test on all kind of EUTs is performed at 2 axes. A pre-check is also performed while the EUT is powered from both AC and DC (battery) power in order to find the worst-case operating condition. AC Power supply voltage for EUT: 120 V 60 Hz (if not stated within the measurement plot and/or test result). Step 1: Preliminary scan (test to identify the highest amplitudes relative to the limit) Intention of this step is, to determine the radiated EMI-profile of the EUT. Settings for step 1: - Detector: Peak-Maxhold - Frequency range: 30 – 1000 MHz - Frequency steps: 60 kHz - IF–Bandwidth: 120 kHz - Measuring time / Frequency step: 100 µs - Turntable angle range: –180° to +180° - Turntable step size: 90° - Height variation range: 1 – 3 m - Height variation step size: 2 m - Polarization: Horizontal + Vertical On basis of this preliminary scan the highest amplitudes and the corresponding frequencies relative to the limit are identified. Emissions above the limit and emissions which are in the 10 dB range below the limit are considered. Step 2: A further measurement will be performed on the frequencies determined in step 1. Intention of this step is, to find out the approximate turntable angle and antenna height for each frequency. Settings for step 2: - Detector: Peak – Maxhold - Measured frequencies: in step 1 determined frequencies - IF – Bandwidth: 120 kHz - Measuring time: 100 ms - Turntable angle range: –180° to +180° - Turntable step size: 45° - Height variation range: 1 – 4 m - Height variation step size: 0.5 m - Polarizations: horizontal + vertical After this step the EMI test system has determined the following values for each frequency (of step 1): - Frequency Page 23 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B - Azimuth value (of turntable) - Antenna height The last two values have now the following accuracy: - Azimuth value (of turntable): 45° - Antenna height: 0.5 m Step 3: final measurement In this step the accuracy of the turntable azimuth and antenna height will be improved. This is necessary to find out the maximum value of every frequency. For each frequency, which was determined the turntable azimuth and antenna height will be adjusted. The turntable azimuth will be slowly varied by +/- 22.5° around this value. During this action the value of emission is continuously measured. The turntable azimuth at the highest emission will be recorded and adjusted. In this position the antenna height is also slowly varied by +/- 25 cm around the antenna height determined. During this action the value of emission is also continuously measured. The antenna height of the highest emission will also be recorded and adjusted. - Detector: Peak – Maxhold - Measured frequencies: in step 1 determined frequencies - IF – Bandwidth: 120 kHz - Measuring time: 100ms - Turntable angle range: –22.5° to +22.5° around the determined value - Height variation range: -0.25 m to +0.25 m around the determined value Step 4: Final measurement (with QP detector) With the settings determined in step 3, the final measurement will be performed: EMI receiver settings for step 4: - Detector: Quasi-Peak(< 1GHz) - Measured frequencies: in step 3 determined frequencies - IF – Bandwidth: 120 kHz - Measuring time: 1 s Measurement above 1 GHz: The following modifications apply to the measurement procedure for the frequency range above 1 GHz: The measurement distance was reduced to 1 m. The results were extrapolated by the extrapolation factor of 20 dB/decade (inverse linear-distance for field strength measurements, inverse-linear-distance-squared for the power density measurements). Due to the fact that in this frequency range a double ridged wave guided horn antenna (up to 18 GHz) and a horn antenna (18–25 GHz) are used, the steps 2-4 as described before, are omitted. Step 1 was performed at one height of the receiving antenna only. Detector: Peak, Average (simultaneously) RBW = VBW = 1 MHz; above 7 GHz 100 kHz Test Requirements / Limits If not stated within the measurement plot and/or test result, class B limits are applied. FCC Part 15, Subpart B, §15.109, Radiated Emission Limits Frequency Range (MHz) Class B Limit (dBµV/m) 30 – 88 40.0 88 – 216 43.5 216 – 960 46.0 above 960 54.0 Frequency Range (MHz) Class A Limit (dBµV/m) / @ 3 m! 30 - 88 49.5 88 - 216 54.0 216 - 960 56.9 above 960 60.0 §15.35(b) ..., there is also a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20 dB above the maximum permitted average limit.... Used conversion factor: Limit (dBµV/m) = 20 log (Limit (µV/m)/1µV/m) NOTE: A missing result table in the corresponding test report section means, that no final measurement was performed because no relevant frequencies (peaks) were found in the preliminary scan. Page 24 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B _____________ Setup Drawings _____________ Setup in the Anechoic chamber. For measurements below 1 GHz the ground was replaced by a conducting ground plane. LISN Analyzer Signaling EUT UNIT Setup in the shielded room for conducted measurements at AC mains port Page 25 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B ___________________________________________________________ Correlation of measurement requirements from FCC and IC ___________________________________________________________ Measurement FCC reference IC reference Conducted Emissions §15.107 ICES-001 Issue 4 or (AC Power Line) ICES-003 Issue 5 or RSS- Gen Issue 3 Radiated Spurious Emissions §15.109 ICES-001 Issue 4 or ICES-003 Issue 5 or RSS- Gen Issue 3 Remarks: 1. FCC Part 15 subpart B, ICES 003 and CISPR 22 contain different definitions of Class A and Class B limits, i.e. which class is applicable to which kind of EUT. ICES 003 and CISPR 22 distinguish between the location where the EUT is intended to operate whilst FCC refers to the method of commercial distribution (distributive trades). 2. The correct assignment of the appropriate class to the concrete EUT is not scope of this test report! 3. A radio apparatus that is specifically subject to an Industry Canada Radio Standard Specification (RSS) and which contains an ITE is not subject to ICES-003 provided the ITE is used only to enable operation of the radio apparatus and the ITE does not control additional functions or capabilities. 4. ISM (Industrial, Scientific or Medical) radio frequency generators, though they may contain ITE, are excluded from the definition of ITE and are not subject to ICES-003. They are instead subject to the Interference-Causing Equipment Standard ICES-001, which specifically addresses ISM radio frequency generators. 5. The kind of EUT (ITE, ISM, Radio) determines which IC Standard is applicable. Page 26 of 27

Reference: MDE_UBLOX_1502_FCCe according to FCC Part 15, subpart B 6 Index 1 Administrative Data 2 1.1 Project Data 2 1.2 Applicant Data 2 1.3 Test Laboratory Data 2 1.4 Signature of the Testing Responsible 3 1.5 Signature of the Accreditation Responsible 3 2 Test Object Data 3 2.1 General OUT Description 3 2.2 Detailed Description of OUT Samples 4 2.3 OUT Features 4 2.4 Auxiliary Equipment 5 2.5 Setups used for Testing 5 3 Results 6 3.1 General 6 3.2 List of the Applicable Body 6 3.3 List of Test Specification 6 3.4 Summary 7 3.5 Detailed Results 8 3.5.1 15b.1 Conducted Emissions (AC Power Line) §15.107 8 3.5.2 15b.2 Spurious Radiated Emissions §15.109 11 4 Test Equipment Details 14 4.1 List of Used Test Equipment 14 5 Annex 21 5.1 Additional Information for Report 21 6 Index 27 Page 27 of 27


Document Created: 2019-06-15 19:38:44
Document Modified: 2019-06-15 19:38:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC