MPE Calculation

FCC ID: XPYTOBYL201

RF Exposure Info

Download: PDF
FCCID_2644979

RF Exposure and Maximum ERP/EIRP Assessment For TOBY-L201 UMTS/HSPA/LTE Data Module FCC ID XPYTOBYL201 IC: 8595A-TOBYL201 Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Test Laboratory: 7Layers AG Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7 layers AG Aufsichtsratsvorsitzenderh Registergerichth registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Peter Mertel USt-IdNr h VAT No.: Phone: +49 (0) 2102 749 0 Vorstandh Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H. Ansorge TAX No. 147/5869/0385 www.7Layers.com A Bureau Veritas Group Company

Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 1 Administrative Data 4 1.1 Testing Laboratory 4 1.2 Project Data 4 1.3 Applicant Data 4 1.4 Manufacturer Data 4 2 Test object Data 5 2.1 General EUT Description 5 2.2 EUT Main components 5 2.3 Ancillary Equipment 5 2.4 Auxiliary Equipment 6 2.5 Operating Modes 7 3 Evaluation Results 8 3.1 Maximum ERP / EIRP 8 3.2 RF Exposure Evaluation for Module 9 3.3 RF Exposure Evaluation for multiple transmitters in co-location 11 Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 2 of 15

Z7layers testing for a smarter world 0 Summary O.1 Technical Report Summary Type of Report RF Exposure and Maximum ERP/EIRP Assessment for a UMTS/LTE radio module. Including RF Exposure for use with co—located radios on generic host device. Applicable FCC Rules For RF Exposure: OET Bulletin 65 Edition 97—01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS—102 Issue 4 — March 2010 For Maximum ERP/EIRP: FCC 47 CFR §22.913 IC SRSP—503 Issue 7, September 2008 FCC 47 CFR §24.232 IC SRSP—510 Issue 5, February 2009 FCC 47 CFR §27.50(d) RSS—139, Issue 2 / SRSP—513 Report version control Version Version Release date Changes validity 000 29.05.2015 Initial version Not Valid Applied IC RSS—102 Issue 5 limits for RF 001 03.06.2015 Exposure Not Valid 002 09.06.2015 WLAN and BT Seq/Slin values updated Valid Responsible for t ® Responsible Accreditation Scope: . for Report: Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 3 of 15

1 Administrative Data 1.1 Testing Laboratory Company Name: 7Layers AG Address Borsigstr. 11 40880 Ratingen Germany This facility has been fully described in a report submitted to the FCC and accepted under the registration number 96716. The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D-PL-12140-01-01 Responsible for Accreditation Scope: Dipl.-Ing. Bernhard Retka Dipl.-Ing. Robert Machulec Dipl.-Ing. Andreas Petz Dipl.-Ing. Marco Kullik Report Template Version: 2014-05-15 1.2 Project Data Responsible for assessment and report: Mr. Andreas Tübel Date of Report: 2015-05-29 1.3 Applicant Data Company Name: u-blox AG Address: Zürcherstrasse 68, CH-8800 Thalwil Switzerland Contact Person: Giulio Comar 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 4 of 15

2 Test object Data 2.1 General EUT Description Equipment under Test UMTS/HSPA/LTE Data Module Type Designation: TOBY-L201 Kind of Device: GPRS/EDGE MSC UMTS/LTE Data Module GPRS Multi-slot class 12 FCC ID: XPYTOBYL201 IC Number: 8595A-TOBYL201 General product description: The EUT is Cellular radio module supporting WCDMA/HSDPA/HSUPA/LTE 2.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment Type Serial No. HW Status SW Status under Test Designation EUT A (Code: UMTS/LTE TOBY-L201 358502060012807 218A02 09.81 DE1015014aa01) Module EUT D (Code: UMTS/LTE TOBY-L201 358502060012930 218A02 09.82 DE1015014ae02) Module EUT E (Code: UMTS/LTE TOBY-L201 358502060016972 218A03 09.84 DE1015014ba04) Module Remark: EUT A is equipped with a temporary antenna connector. The Module is not sold with a predefined antenna. NOTE: The short description is used to simplify the identification of the EUT in this test report. 2.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Ancillary Equipment can influence the test results. Short Equipment Type HW Status SW Status Serial no. FCC ID Description under Test Designation AE 1 AC/DC UUX324- - - E09- – converter 1215 0291981 AE 2 Evaluation EVB-WL3 NO_EVK_CS - - - test board _191A00 Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 5 of 15

2.4 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Auxiliary Equipment can influence the test results. Short Equipment Type Serial no. HW Status SW Status FCC ID Description under Test Designation N/A – Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 6 of 15

2.5 Operating Modes This chapter describes the operating modes of the EUTs used for testing. Op. Mode Description of Operating Modes Remarks Op-mode 1 EUT transmitting in standalone configuration Antenna-to-person distance > 20cm Op-mode 2 EUT transmitting in the 850 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio. Op-mode 3 EUT transmitting in the 1900 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio. Op-mode 4 EUT transmitting in the 850 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic WLAN radio. Op-mode 5 EUT transmitting in the 1900 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic WLAN radio. Op-mode 6 EUT transmitting in the 850 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio and WLAN radio. Op-mode 7 EUT transmitting in the 1900 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio and WLAN radio. Op-mode 8 EUT transmitting in the 700 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio. Op-mode 9 EUT transmitting in the 700 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic WLAN radio. Op-mode 10 EUT transmitting in the 700 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio and WLAN radio. Op-mode 11 EUT transmitting in the 1700 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio. Op-mode 12 EUT transmitting in the 1700 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic WLAN radio. Op-mode 13 EUT transmitting in the 1700 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio and WLAN radio. Op-mode 14 EUT transmitting in the 750 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio. Op-mode 15 EUT transmitting in the 750 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic WLAN radio. Op-mode 16 EUT transmitting in the 750 MHz Band Antenna-to-person distance > 20cm simultaneously with a generic Bluetooth radio and WLAN radio. Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 7 of 15

3 Evaluation Results 3.1 Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 (850MHZ GSM/GPRS) (FDD5 WCDMA/HSUPA/HSDPA/LTE) IC RSS-132, Issue 3 FCC 47 CFR §24.232 (1900MHZ GSM/GPRS) (FDD2 WCDMA/HSUPA/HSDPA/LTE) IC RSS-133 Issue 6 FCC 47 CFR §27.50(d) (FDD4,7,17 UMTS/LTE) RSS-139, Issue 2 / SRSP-513 3.1.1 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP-503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7 Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent ERIP value of 11.5 Watts. For all other limits, refer to the values stipulated in the corresponding tables. 3.1.2 Test Protocol Maximum Maximum Conducted Maximum antenna output Conducted Freq of FCC / IC gain to Duty power output highest EIRP limit meet EIRP Band Mode Cycle (%) Frequency (MHZ) (dBm) power (mW) power (mW) Limit (dBi) FDD 2 UMTS 100.0% 1850 - 1907.6 24.5 281.8382931 1907.60 2000 8.5 FDD 5 UMTS 100.0% 824 - 846.6 24.5 281.8382931 836.00 11484 16.1 eFDD 2 LTE 100.0% 1850-1910 22.58 181.1340093 1902.50 2000 10.4 eFDD 4 LTE 100.0% 1710-1755 23.24 210.862815 1732.50 1000 6.8 eFDD 5 LTE 100.0% 824 - 849 22.99 199.0673339 825.50 11484 17.6 eFDD13 LTE 100.0% 777-787 22.25 167.8804018 784.50 4920 14.7 eFDD 17 LTE 100.0% 704-716 23.05 201.8366364 710.00 4920 13.9 3.1.3 Conclusion All gains in (dBi) Max gain to be Max gain to be Max gain to be Maximum gain to used to comply Band used to comply used to comply be compliant with with FCC MPE with EIRP Limits with IC MPE Limits all limits Limits FDD 2 8.5 12.5 9.1 8.5 FDD 5 16.1 10.0 6.7 6.7 eFDD 2 10.4 13.0 9.6 8.5 eFDD 4 6.8 12.7 9.0 6.8 eFDD 5 17.6 10.4 7.1 7.1 eFDD13 14.7 10.2 6.9 6.9 eFDD 17 13.9 9.8 6.7 6.7 Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 8 of 15

3.2 RF Exposure Evaluation for Module Standards OET Bulletin 65 Edition 97-01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS-102 Issue 5 – March 2015 3.2.1 Test limits As specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure. Frequency range (MHz) Power density (mW/cm²) 300 – 1,500 f/1500 1,500 – 100,000 1.0 Limits specified per RSS-102, Issue 5. Frequency range (MHz) Power density (W/m²) Power density (mW/cm²) 0.6834 300 – 6000 0.02619 f mW/cm² = W/m² * 0.1 Equation OET bulletin 65, page 18, edition 97-01: Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 9 of 15

3.2.2 Test Protocol Maximum antenna gain to comply with MPE limits for FCC Maximum Maximum Maximum Equivalent antenna Conducted Conducted conducted gain to output output output meet Separation Duty Frequency power power power MPE Limit MPE Limit distance Band Mode Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) (dBi) (cm) FDD 2 UMTS 100.0% 1907.6 24.5 281.84 281.84 1.0000 12.5 20 FDD 5 UMTS 100.0% 836.0 24.5 281.84 281.84 0.5573 10.0 20 eFDD 2 LTE 100.0% 1902.5 24 251.19 251.19 1.0000 13.0 20 eFDD 4 LTE 100.0% 1732.5 24.3 269.15 269.15 1.0000 12.7 20 eFDD 5 LTE 100.0% 825.5 24 251.19 251.19 0.5503 10.4 20 eFDD13 LTE 100.0% 777.0 24 251.19 251.19 0.5180 10.2 20 eFDD 17 LTE 100.0% 710.0 24 251.19 251.19 0.4733 9.8 20 * Conducted output power values bases on “Tune-up” information provided by manufacturer. Maximum antenna gain to comply with MPE limits for Industry Canada Maximum Maximum Maximum Equivalent antenna Conducted Conducted conducted gain to output output output meet Separation Duty Frequency power power power MPE Limit MPE Limit distance Band Mode Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) (dBi) (cm) FDD 2 UMTS 100.0% 1907.6 24.5 281.84 281.84 0.4571 9.1 20 FDD 5 UMTS 100.0% 836.0 24.5 281.84 281.84 0.2601 6.7 20 eFDD 2 LTE 100.0% 1902.5 24.0 251.19 251.19 0.4563 9.6 20 eFDD 4 LTE 100.0% 1732.5 24.3 269.15 269.15 0.4280 9.0 20 eFDD 5 LTE 100.0% 825.5 24.0 251.19 251.19 0.2579 7.1 20 eFDD13 LTE 100.0% 777.0 24.0 251.19 251.19 0.2474 6.9 20 eFDD 17 LTE 100.0% 710.0 24.0 251.19 251.19 0.2326 6.7 20 * Conducted output power values bases on “Tune-up” information provided by manufacturer. 3.2.3 Conclusion Max gain Maximum gain Max gain for for to be Band FCC MPE Industry compliant with Limits Canada all limits MPE Limits FDD 2 12.5 9.1 9.1 FDD 5 10.0 6.7 6.7 eFDD 2 13.0 9.6 9.6 eFDD 4 12.7 9.0 9.0 eFDD 5 10.4 7.1 7.1 eFDD13 10.2 6.9 6.9 eFDD 17 9.8 6.7 6.7 Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 10 of 15

3.3 RF Exposure Evaluation for multiple transmitters in co-location Standards OET Bulletin 65 Edition 97-01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS-102 Issue 5 – March 2015 3.3.1 Co-Location Considerations The calculation below is used to consider situations in which simultaneous exposure to fields of different frequencies occur. The calculation is performed by the sum of each relative exposure for each equipment according to the following criteria. Where: Seq is the power density of the electromagnetic field at a given distance by a specific transmitter and a defined frequency. Slin is the MPE limit for the frequency being evaluated. 3.3.2 Assumptions 1. Primary transmitter does not support power reduction for multiple time slots on the uplink. 2. Antenna separation from module to human body is ≥ 20cm. 3. Separation distance between co-located transmitting antennas is 0cm. 4. Hypothetical Bluetooth radio is assumed to have an output power of 9.5dBm and an antenna gain of 4dBi. 5. Hypothetical WLAN radio is assumed to have an output power of 19dBm and an antenna gain of 5dBi. 3.3.3 Test Protocol The below table is to determine the MPE values using the maximum gain values obtained in section 3.3.4 of this document. OP mode-1 – FOR FCC ONLY Maximum Equivalent Conducted conducted MPE output output Value Separation Duty Frequency power power MPE Limit using distance Band Mode Cycle (MHZ) (dBm) (mW) (mW/cm²) Max gain (cm) Verdict FDD 2 UMTS 100.0% 1907.6 24.5 281.84 1.0000 0.2862 20 Pass FDD 5 UMTS 100.0% 836.0 24.5 281.84 0.5573 0.4808 20 Pass eFDD 2 LTE 100.0% 1902.5 24 251.19 1.0000 0.2551 20 Pass eFDD 4 LTE 100.0% 1732.5 24.3 269.15 1.0000 0.1612 20 Pass eFDD 5 LTE 100.0% 825.5 24 251.19 0.5503 0.4285 20 Pass eFDD13 LTE 100.0% 777.0 24 251.19 0.5180 0.4742 20 Pass eFDD 17 LTE 100.0% 710.0 24 251.19 0.4733 0.3890 20 Pass * Conducted output power values bases on “Tune-up” information provided by manufacturer. Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 11 of 15

OP mode-1 – FOR Industry Canada ONLY Maximum Equivalent Conducted conducted MPE output output Value Separation Duty Frequency power power MPE Limit using distance Band Mode Cycle (MHZ) (dBm) (mW) (mW/cm²) Max gain (cm) Verdict FDD 2 UMTS 100.0% 1907.6 24.5 281.84 0.4571 0.2862 20 PASS FDD 5 UMTS 100.0% 836.6 24.5 281.84 0.2602 0.1532 20 PASS eFDD 2 LTE 100.0% 1902.5 24 251.19 0.4563 0.2551 20 PASS eFDD 4 LTE 100.0% 1732.5 24.3 269.15 0.4280 0.1612 20 PASS eFDD 5 LTE 100.0% 825.5 24 251.19 0.2579 0.1365 20 PASS eFDD13 LTE 100.0% 777.0 24 251.19 0.2474 0.1467 20 PASS eFDD 17 LTE 100.0% 710.0 24 251.19 0.2326 0.0963 20 PASS MPE Values for the generic Bluetooth and WLAN radios operating alone. These values are used to calculate the relative exposure for simultaneous transmission with the primary transmitter. MPE Calculation for Single Transmitter installed in Generic host for FCC ERP Separation Duty Equivalent MPE Limit Maximum Power distance Radio type Cycle ERP (mW) (mW) (mW/cm²) antenna gain density (cm) Verdict Bluetooth 64% 8.91 3.72 1.0000 4.0 0.0019 20 Pass WLAN 100% 79.43 79.43 1.0000 5.0 0.0500 20 Pass MPE Calculation for Single Transmitter installed in Generic host for Industry Canada ERP Separation Duty Equivalent MPE Limit Maximum Power distance Radio type Cycle ERP (mW) (mW) (mW/cm²) antenna gain density (cm) Verdict Bluetooth 64% 8.91 3.72 0.54 4.00 0.0019 20.00 Pass WLAN 100% 79.43 79.43 0.54 5.00 0.0500 20.00 Pass Below are the relative exposure values for the primary, secondary and combined primary + secondary transmitters for both FCC and Industry Canada limits. OP mode-1 Relative exposure for Primary Transmitter for FCC Seq Output ---------- OP-Mode Mode power Frequency (MHZ) Seq Slin (mW/cm²) SLin Verdict FDD 2 UMTS 281.8383 1907.6 0.3969 1.0000 0.39694516 Pass FDD 5 UMTS 281.8383 836.0 0.5233 0.5573 0.93889169 Pass eFDD 2 LTE 251.1886 1902.5 0.3538 1.0000 0.35377775 Pass eFDD 4 LTE 269.1535 1732.5 0.2563 1.0000 0.25628932 Pass eFDD 5 LTE 251.1886 825.5 0.4664 0.5503 0.84743168 Pass eFDD13 LTE 251.1886 777.0 0.4883 0.5180 0.94275914 Pass Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 12 of 15

eFDD 17 LTE 251.1886 710.0 0.4454 0.4733 0.94094323 Pass Relative exposure for Primary Transmitter for Industry Canada Seq Output ---------- OP-Mode Mode power Frequency (MHZ) Seq Slin (mW/cm²) SLin Verdict FDD 2 UMTS 281.8383 1907.6 0.3969 0.4571 0.868380341 Pass FDD 5 UMTS 281.8383 836.0 0.2337 0.2601 0.898585162 Pass eFDD 2 LTE 251.1886 1902.5 0.3538 0.4563 0.775362043 Pass eFDD 4 LTE 269.1535 1732.5 0.2563 0.4280 0.598805414 Pass eFDD 5 LTE 251.1886 825.5 0.2083 0.2579 0.807812487 Pass eFDD13 LTE 251.1886 777.0 0.2232 0.2474 0.902155267 Pass eFDD 17 LTE 251.1886 710.0 0.1425 0.2326 0.612413926 Pass Relative exposure for Secondary transmitter for FCC OP-Mode Transmitter Output Seq (mW/cm²) Slin (mW/cm²) Seq power ---------- SLin 2 Bluetooth 3.72 0.0019 1.0000 0.001856652 3 WLAN 79.43 0.0500 1.0000 0.049972435 4 Bluetooth 3.72 0.0019 1.0000 0.001856652 WLAN 79.43 0.0500 1.0000 0.049972435 Relative exposure for Secondary transmitter for Industry Canada OP-Mode Transmitter Output Seq (mW/cm²) Slin (mW/cm²) Seq power ---------- SLin 2 Bluetooth 3.72 0.0019 0.5410 0.003431873 3 WLAN 79.43 0.0500 0.5410 0.092370053 4 Bluetooth 3.72 0.0019 0.5410 0.003431873 WLAN 79.43 0.0500 0.5410 0.092370053 Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 13 of 15

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for FCC Compliance Maximum Maximum Maximum (Spri/Slim_pri) + Frequency Spri/Slim_pri + (Ssec / Slin_Sec) OP-Mode Transmitter (MHZ) Seq / SLin Ssec / Slin_Sec <1 Bluetooth 2441 0.0019 2 TOBY L201 836 0.9389 0.9407 Compliant Bluetooth 2441 0.0019 3 TOBY L201 1907.6 0.3969 0.3988 Compliant WLAN 2437 0.0500 4 TOBY L201 836 0.9389 0.9889 Compliant WLAN 2437 0.0500 5 TOBY L201 1907.6 0.3969 0.4469 Compliant Bluetooth 2441 0.0019 WLAN 2437 0.0500 6 TOBY L201 836 0.9389 0.9907 Compliant Bluetooth 2441 0.0019 WLAN 2437 0.0500 7 TOBY L201 1907.6 0.3969 0.4488 Compliant Bluetooth 2441 0.0019 8 TOBY L201 710 0.9409 0.9428 Compliant WLAN 2437 0.0500 9 TOBY L201 710 0.9409 0.9909 Compliant Bluetooth 2441 0.0019 WLAN 2437 0.0500 10 TOBY L201 710 0.9409 0.9928 Compliant Bluetooth 2441 0.0019 11 TOBY L201 1740 0.2563 0.2581 Compliant WLAN 2437 0.0500 12 TOBY L201 1740 0.2563 0.3063 Compliant Bluetooth 2441 0.0019 WLAN 2437 0.0500 13 TOBY L201 1740 0.2563 0.3081 Compliant Bluetooth 2441 0.0019 14 TOBY L201 777 0.9428 0.9446 Compliant WLAN 2437 0.0019 15 TOBY L201 777 0.9428 0.9446 Compliant Bluetooth 2441 0.0019 WLAN 2437 0.0500 16 TOBY L201 777 0.9428 0.9946 Compliant Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 14 of 15

P Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for Industry Canada Compliance Maximum Maximum Maximum (Spri/Slim_pri) + Frequency Spri/Slim_pri + (Ssec / Slin_Sec) OP-Mode Transmitter (MHZ) Seq / SLin Ssec / Slin_Sec <1 Bluetooth 2441 0.0034 2 TOBY L201 836 0.8986 0.9020 Compliant Bluetooth 2441 0.0034 3 TOBY L201 1907.6 0.8684 0.8718 Compliant WLAN 2437 0.0924 4 TOBY L201 836 0.8986 0.9910 Compliant WLAN 2437 0.0924 5 TOBY L201 1907.6 0.8684 0.9608 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 6 TOBY L201 836 0.8986 0.9944 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 7 TOBY L201 1907.6 0.8684 0.9642 Compliant Bluetooth 2441 0.0034 8 TOBY L201 710 0.6124 0.6158 Compliant WLAN 2437 0.0924 9 TOBY L201 710 0.6124 0.7048 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 10 TOBY L201 710 0.6124 0.7082 Compliant Bluetooth 2441 0.0034 11 TOBY L201 1740 0.5988 0.6022 Compliant WLAN 2437 0.0924 12 TOBY L201 1740 0.5988 0.6912 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 13 TOBY L201 1740 0.5988 0.6946 Compliant Bluetooth 2441 0.0034 14 TOBY L201 777 0.9022 0.9056 Compliant WLAN 2437 0.0924 15 TOBY L201 777 0.9022 0.9945 Compliant Bluetooth 2441 0.0034 WLAN 2437 0.0924 16 TOBY L201 777 0.9022 0.9980 Compliant When operating the primary transmitter simultaneously with a generic Bluetooth and WLAN radio, the following antenna gains can be used with the module TOBY-L201 while still complying with the exposure limits. Band dBi (For FCC) dBi (For Industry Canada) 700 9.5 4.55 750 9.9 6.5 850 9.7 6.2 1700 6.8 6.8 1900 8.5 8.5 Assessment Reference: MDE_UBLOX_1502_MPEf rev2 Page 15 of 15


Document Created: 2015-06-11 18:34:38
Document Modified: 2015-06-11 18:34:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC