Modular Approval

FCC ID: XPYTOBYL200

Cover Letter(s)

Download: PDF
FCCID_2424559

FCC Federal Communications Commission Patrick Lomax 23 May 2014 Phone +49 (0) 2102 749 331 Fax +49 (0) 2102 749 350 Email: patrick.lomax@7Layers.de request for a modular approval - FCC ID: XPYTOBYL200 Dear Application Examiner, the module “TOBY-L200” is seeking FCC authorization as a modular transmitter. The requirement of the FCC part 15.212 are met. The following requirements are fulfilled: 1. The modular transmitter must have its own RF shielding The radio portion of the module has its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs The module has a memory management unit inside of the IC. It buffers the data inputs. 3. The modular transmitter must have its own power supply regulation The IC contains an own voltage regulation. In case of changes in the supply voltage VCC (for example caused by temperature changes or other effects), the internal voltage will be stabilized. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c Not applicable to licensed transmitters. Module is professionally installed and antenna gain is listed in teh installation instructions. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration. Registergericht registered in: Vorstand Board of Directors: 7 layers AG, Borsigstrasse 11 Ratingen, HRB 3264 Dr. Wolfgang Dahm 40880 Ratingen, Germany Aufsichtsratsvorsitzende Dr. Hans-Jürgen Meckelburg Phone: +49 (0) 2102 749 0 Chairman of the Supervisory Board: Fax: +49 (0) 2102 749 350 Dr. Sabine Grobecker www.7Layers.com

-2- 6. The modular transmitter must be labelled with its own FCC ID number The Module is labelled with its own FCC ID. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. 8. The modular transmitter must comply with any applicable RF exposure requirements. This device has been assessed for mobile use and complies with the limits. Please contact us if you have any additional questions. Best Regards, Patrick Lomax Project Manager 7layers AG


Document Created: 2014-10-16 13:04:56
Document Modified: 2014-10-16 13:04:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC