Modular Approval Letter

FCC ID: XPYSARAU260

Cover Letter(s)

Download: PDF
FCCID_2789641

4831 W 136th Street Leawood, KS 66224 Phone: 1-844-543-7477 Date (17/09/2015) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Modular Approval Request FCC ID: XPYSARAU260 The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the YES radio frequency circuitry shielded. The radio portion of the module has its Physical components and tuning own RF shielding. capacitor(s) may be located external to the shield, but must be on the module assembly (b) The module must have buffered YES modulation/data inputs to ensure that The module has a memory management the device will comply with Part 15 unit inside of the IC. It buffers the data requirements with any type of input inputs. signal (c) The module must contain power YES supply regulation on the module The IC contains an own voltage regulation. In case of changes in the supply voltage VCC (for example caused by temperature changes or other effects), the internal voltage will be stabilized. (d) The module must contain a YES permanently attached antenna, or The modular tranmsitter has a permanetly contain a unique antenna connector, attached antenna. and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) (e) The module must demonstrate YES compliance in a stand-alone The module was tested in a stand- configuration alone configuration.

(f) The module must be labelled with YES its permanently affixed FCC ID label, The module is compliant with all applicable or use an electronic display (See FCC rules for device labeling. KDB Publication 784748 about labelling requirements) (g) The module must comply with all YES specific rules applicable to the The device has been assesed for mobile transmitter. The grantee must provide use and complies with all rules applicable comprehensive instructions to explain to the transmitter. compliance requirements Modular approval requirement Yes (provide brief statement) No * (h) The module must comply with RF YES exposure requirements The device has been tested for mobile use and complies with RF exposure limits. * Please provide a detailed explanation if the answer is “No.” Yours sincerely, Name: Jason Hicks Title: President


Document Created: 2015-10-20 14:19:26
Document Modified: 2015-10-20 14:19:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC