Model Numbers

FCC ID: XPYNINAB1

Cover Letter(s)

Download: PDF
FCCID_3113472

Registered office: u-blox AG Zürcherstrasse 68 RE: Certification Application 8800 Thalwil Switzerland Product family: NINA-B1 HVIN: NINA-B111 and NINA-B112 Company number: CH-020.3.020.161-7 FCC ID: XPYNINAB1 info@u-blox.com IC: 8595A-NINAB1 support@u-blox.com NINA-B1 FCC/IC filing cover letter Background u-blox intend to file an application for single-modular transmitter approval with shared FCC ID for our product NINA-B1 available in the variants NINA-B111 and NINA-B112 as shown in the table below. Parts of this document were submitted as a cover letter to our KDB enquiry (Tracking Number 509290) on the use and applicability of test reports from NINA-B111 on NINA-B112. u-blox product variant Proposed FCC ID: NINA-B111 XPYNINA-B1 NINA-B112 XPYNINA-B1 NINA-B1 product description The NINA-B1 series are small stand-alone Bluetooth low-energy (LE) modules with NFC passive tag functionality. They are offered in two variants; NINA-B111 (10 x 10.6 mm) with the BLE RF-port available at an antenna-pin, and the extended NINA-B112 (10 x 14 mm) having the RF-port connected to an internal PIFA antenna. The modules can only operate in 1 Mbps BLE mode. The included BLE stack from Nordic Semiconductors supports concurrent Central and Peripheral roles with up to three connections as central and one connection as peripheral. Both module variants require an external NFC antenna in order to support NFC; the antenna is connected to two NFC antenna pins underneath the module. Only passive tag functionality is available. The NINA-B1 modules operate in the 2.4 GHz ISM band and at 13.56 MHz for NFC. Both product variants use identical firmware on the radio transceiver. Product variants, technical differences Both product variants, NINA-B111 and NINA-B112, have identical RF and digital parts. PCB stack-up and Layout under the RF shield cover is identical on both variants. The only difference between the two variants is the added 3.4 mm of PCB on NINA-B112 that carries the internal PIFA antenna. locate, communicate, accelerate

Table 1: NINA-B1 module versions Model Description Module photo NINA-B111 NINA-B1 with a 10.0 x 10.6 mm PCB, RF- port available at antenna-pin to connect an external antenna. NINA-B112 NINA-B1 with a 10.0 x 14.0 mm PCB, RF- port connected to internal PIFA antenna. The module pin-out, operating conditions, and electrical characteristics are identical for both versions


Document Created: 2016-08-19 11:57:12
Document Modified: 2016-08-19 11:57:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC