MPE

FCC ID: XPYLUCYH200

RF Exposure Info

Download: PDF
FCCID_1320530

MDE_UBLOX_0902 u-blox AG Mr. Giulio Comar Via Stazione di Prosecco, 15 34010 Sgonico (TS) Italy Sven Lüngen 30.06.2010 Phone +49 (0) 2102 749 153 Fax +49 (0) 2102 749 350 e-Mail : sven.luengen@7layers.de Maximum Permissible Exposure for product: Lucy-H200 Dear Mr. Comar, please find enclosed your Maximum Permissible Exposure calculations for the Lucy-H200. Best Regards Sven Lüngen (Senior Project Manager) 7 layers AG Aufsichtsratsvorsitzenderh Registergerichth registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr h VAT No.: Phone: +49 (0) 2102 749 0 Vorstandh Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. Hans Jürgen Meckelburg TAX No. 147/5869/0385 www.7Layers.com Wilfried Klassmann

-2- Maximum Permissible Exposure (as specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure) Frequency range (MHz) Power density (mW/cm²) 300 – 1500 f/1500 1,500 – 100000 1.0 (as specified in Table 2 in EN 1999/519-EC) Frequency range (MHz) Power density (mW/cm²) 400 – 2000 f/2000 2000 - 300000 1 mW/cm² General Comment The Lucy-H200 operates with power reduction as described in 3 GPP TS 51.010-1 v9.01. For reference see table 2. For determination of the maximum antenna gain in this calculation the power reduction and the duty cycle effect are considered. Table 1 shows measured power values in different uplink slot operation modes and the calculated RMS power under consideration of the duty cycle effect. Typical max output power (calibration target, calibration tolerances not considered) GSM850/GSM900 GSM1800/GSM1900 Power/slot Nof TX slots Power/slot Nof TX slots Operative Mode [dBm] [dBm] GSM Normal TCH 32.2 1 29.2 1 GPRS 1‐TX‐GMSK 32.2 1 29.2 1 GPRS 2‐TX‐GMSK 30.5 2 27.5 2 GPRS 3‐TX‐GMSK 29.0 3 27.5 3 GPRS 4‐TX‐GMSK 27.0 4 26.0 4 EDGE 1‐TX‐8PSK 26.0 1 25.0 1 EDGE 2‐TX‐8PSK 24.2 2 23.5 2 EDGE 3‐TX‐8PSK 22.4 3 21.8 3 EDGE 4‐TX‐8PSK 20.6 4 21.8 4 UMTS Band I Band II Band V Average Power Average Power Average Power Operative Mode [dBm] [dBm] [dBm] Max Power setting 23.0 23.0 23.0 Table 1: Power values of Lucy-H200

-3- Number of Permissible nominal timeslots in uplink reduction of maximum assignment output power, (dB) 1 0 2 3,0 3 4,8 4 6,0 5 7,0 6 7,8 7 8,5 8 9,0 Table 2: Allowed power reduction in multi slot class operation modes for Rel5 and onwards devices, ref: 3GPP TS 51.010-1 v9.01

-4- Calculations 850/900 MHz band Maximum RMS output power at Antenna terminal according to table 1 30.5 dBm – 6.02 dBm (2TX) = 24.48 dBm Maximum output power at Antenna terminal according Test report MDE_UBLOX_0902_FCCb: 33.29 dBm Prediction distance R: 20 cm Prediction frequency: 824.20 MHz MPE limit S: 0.5494 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = P*G / (4πR²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum permissible antenna gain considering S limit 5.85 dBi Maximal permissible antenna gain considering output power limitation of 7 Watts ERP (FCC §22.931). G=10*log(7000)-33.29+2.15 7.30 dBi Prediction The maximum allowed MPE value of 0.5494 mW/cm²will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 5.85 dBi is used. Considering the max output power of 7 Watts ERP (FCC §22.931) for mobile stations the maximum antenna gain is 7.30 dBi, which is higher than 5.85 dBi. For mobile stations the antenna gain is limited to 5.85 dBi in accordance to the FCC regulations.

-5- Calculations 1800 MHz band Maximum RMS output power at Antenna terminal according to table 1 27.5 dBm – 4.26 dBm (3TX) = 23.24 dBm Prediction distance R: 20 cm Prediction frequency: 1710.2 MHz MPE limit S: 1 mW/cm² (according to FCC Bulletin 65) Equation OET bulletin 65, page 18, edition 97-01: S = P*G / (4πR²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum permissible antenna gain considering S limit 15.03 dBi Prediction The maximum allowed MPE value of 0.8551 mW/cm² will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 15.03 dBi is used. This means that the power density levels in a distance of 20 cm are in accordance with the EN regulations as long as the used antenna has a gain below 15.03 dBi.

-6- Calculations 1900 MHz band Maximum RMS output power at Antenna terminal according to table 1 27.5 dBm – 4.26 dBm (3TX) = 23.24 dBm Maximum output power at Antenna terminal according Test report MDE_UBLOX_0902_FCCc: 30.72 dBm Enhancement factor EF 2.56 (see FCC Bulletin OET 65) Prediction distance R: 20 cm Prediction frequency: 1850.2 MHz MPE limit S: 1 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = EF*P*G / (4πR²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum permissible antenna gain (Table 1B of 47 CFR 1.1310): 9.69 dBi Maximum permissible antenna gain for mobile / portable stations: 2.29 dBi (Considering 2 Watts EIRP FCC §24.235: G=10*log(2000)-30.72) Prediction The maximum allowed MPE value of 1 mW/cm² will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 9.69 dBi is used. This means that the power density levels in a distance of 20 cm are in accordance with the FCC regulations as long as the used antenna has a gain below 9.69 dBi. Considering the max output power of 2 Watts EIRP (FCC §24.235) for mobile / portable stations the maximum antenna gain is 2.29 dBi, which is lower than 9.69 dBi. For mobile and portable stations the antenna gain is limited to 2.29 dBi in accordance with the FCC regulations.

-7- Calculations 2100 MHz band Maximum RMS output power at Antenna terminal according to table 1 23.00 dBm Enhancement factor EF 2.56 (see FCC Bulletin OET 65) Prediction distance R: 20 cm Prediction frequency: 1922.40 MHz MPE limit S: 0.9612 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = EF*P*G / (4πR²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum permissible antenna gain: 9.76 dBi Prediction The maximum allowed MPE value of 0.9612 mW/cm² will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 9.76 dBi is used. This means that the power density levels in a distance of 20 cm are in accordance with the EN regulations as long as the used antenna has a gain below 9.76 dBi.


Document Created: 2010-07-16 15:07:39
Document Modified: 2010-07-16 15:07:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC