MDE_UBLOX_1918_MPE01_LISA_U200

FCC ID: XPYLISAU200

RF Exposure Info

Download: PDF
FCCID_4434887

RF Exposure and Maximum ERP/EIRP Assessment For LISA-U200 GSM/UMTS Module FCC ID: XPYLISAU200 IC: 8595A-LISAU200 Assessment Reference: MDE_UBLOX_1918_MPE01 Test Laboratory: 7layers GmbH Borsigstraße 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Registergericht registered in: Borsigstraße 11 Geschäftsführer / Düsseldorf, HRB 75554 40880 Ratingen, Germany Managing Directors: USt-IdNr VAT No.: T +49 (0) 2102 749 0 Frank Spiller DE203159652 F +49 (0) 2102 749 350 Bernhard Retka TAX No. 147/5869/0385 www.7layers.com Alexandre Norré-Oudard A Bureau Veritas Group Company

Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 1 Administrative Data 4 1.1 Testing Laboratory 4 1.2 Project Data 4 1.3 Applicant Data 4 1.4 Manufacturer Data 4 2 Test object Data 5 2.1 General EUT Description 5 2.2 EUT Main components 5 2.3 Ancillary Equipment 5 2.4 Auxiliary Equipment 6 3 Evaluation Results 7 3.1 Maximum ERP / EIRP 7 3.2 RF Exposure Evaluation for Module 8 3.3 RF Exposure Evaluation for multiple transmitters in co-location 10 Assessment Reference: MDE_UBLOX_1918_MPE01 Page 2 of 14

layers A Bureau Veritas Group Company 0 Summary O.1 Technical Report Summary Type of Report RF Exposure and Maximum ERP/EIRP Assessment for a GSM/UMTS radio module. Including RF Exposure for use with co—located radios on generic host device. Applicable FCC and ISED Rules For RF Exposure: OET Bulletin 65 Edition 97—01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS—102 Issue 5 — March 2015 For Maximum ERP/EIRP: FCC 47 CFR §22.913 IC SRSP—503 Issue 7, September 2008 FCC 47 CFR §24.232 IC SRSP—510 Issue 5, February 2009 FCC 47 CFR §27.50(d) RSS—139, Issue 3 / SRSP—513, July 2015 Report version control Rev Version Release date Changes Version validity — 2019—08—08 Initial version Valid Responsible for y Responsible _ Accreditation Scope: . for Report: Assessment Reference: MDE_UBLOX_1918_MPEO1 Page 3 of 14

1 Administrative Data 1.1 Testing Laboratory Company Name: 7layers GmbH Address Borsigstr. 11 40880 Ratingen Germany DAkkS ISO/IEC 17025 accreditation D-PL-12140-01-00, D-PL-12140-01-01 FCC accreditation Designation Number: DE0015 ISED accreditation CAB identifier: DE0007 Test Firm Registration #: 3699A Responsible for Accreditation Scope: Dipl.-Ing. Bernhard Retka Dipl.-Ing. Robert Machulec Dipl.-Ing. Andreas Petz Dipl.-Ing. Marco Kullik Report Template Version: 2017-08-02 1.2 Project Data Responsible for assessment and report: Mr. Roseelan Sathiyaseelan Date of Report: 2019-08-08 1.3 Applicant Data Company Name: u-blox AG Address: Zürcherstrasse 68, CH-8800 Thalwil Switzerland Contact Person: Giulio Comar 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_1918_MPE01 Page 4 of 14

2 Test object Data 2.1 General EUT Description Equipment under Test LISA-U200 Module Type Designation: LISA-U200 Kind of Device: GSM/UMTS Module GSM MSC/UMTS/LTE CAT 8 FCC ID: XPYLISAU200 IC Number: 8595A-LISAU200 General product description: The EUT is Cellular radio module supporting GSM/GPRS/WCDMA/HSDPA/HSUPA 2.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment Type Serial No. HW Status SW Status under Test Designation EUT A Code: DE1015114 LISA-U200 U200 358875100011231 146DB0 23.41 AE01 Remark: EUT A is equipped with a temporary antenna connector. The Module is not sold with a predefined antenna. NOTE: The short description is used to simplify the identification of the EUT in this test report. 2.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Ancillary Equipment can influence the test results. Short Equipment Type HW Status SW Status Serial no. FCC ID Description under Test Designation NA – Assessment Reference: MDE_UBLOX_1918_MPE01 Page 5 of 14

2.4 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Auxiliary Equipment can influence the test results. Short Equipment Type Serial no. HW Status SW Status FCC ID Description under Test Designation N/A – Assessment Reference: MDE_UBLOX_1918_MPE01 Page 6 of 14

3 Evaluation Results 3.1 Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 GSM 850/FDD5 WCDMA/HSUPA/HSDPA IC RSS-132, Issue 3 FCC 47 CFR §24.232 GSM 1900/FDD2 WCDMA/HSUPA/HSDPA IC RSS-133 Issue 6 FCC 47 CFR §27.50(d) (FDD4,7 UMTS/LTE) RSS-139, Issue 3 / SRSP-513 3.1.1 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP-503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7 Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent ERIP value of 11.5 Watts. For all other limits, refer to the values stipulated in the corresponding tables. 3.1.2 Test Protocol Maximum antenna gain to comply with EIRP limits for FCC and Industry Canada Maximum Maximum Maximum Conducted Conducted Freq of antenna gain to Duty Cycle output power output power highest power FCC EIRP meet EIRP Limit Band Mode (%) Frequency (MHZ) (dBm) (mW) (MHz) limit (mW) (dBi) 850 GSM 50.0% 824.2 - 848.8 34 2511.8864 848.80 11484 6.6 1900 GSM 50.0% 1850.2 - 1909.8 31 1258.9254 1909.80 2000 2.0 FDD 2 UMTS 100.0% 1850 - 1907.6 25 316.22777 1907.60 2000 8.0 FDD 4 UMTS 100.0% 1710 - 1752.6 25 316.22777 1752.60 1000 5.0 FDD 5 UMTS 100.0% 824 - 846.6 25 316.22777 846.60 11484 15.6 3.1.3 Conclusion Max gain to Max gain to Max gain to Maximum be used to be used to be used to gain to be Band comply with comply with comply with compliant EIRP Limits FCC MPE IC MPE Limits with all limits 850 6.6 4.4 1.1 1.1 1900 2.0 9.3 5.9 2.0 FDD 2 8.0 12.9 9.5 8.0 FDD 4 5.0 12.3 8.7 5.0 FDD 5 15.6 10.0 6.7 6.7 Gain expressed in dBi Assessment Reference: MDE_UBLOX_1918_MPE01 Page 7 of 14

3.2 RF Exposure Evaluation for Module Standards OET Bulletin 65 Edition 97-01 August 1997 RSS-102 Issue 5 – March 2015 3.2.1 Test limits Limits specified per RSS-102, Issue 5. Frequency range (MHz) Power density (W/m²) Power density (mW/cm²) 300 – 6000 0.02619 f0.6834 mW/cm² = W/m² * 0.1 𝑃𝑃𝑃𝑃 𝐸𝐸𝐸𝐸𝐸𝐸𝐸𝐸 Equation OET bulletin 65, page 18, edition 97-01: 𝑆𝑆 = = 4πœ‹πœ‹πœ‹πœ‹ 2 4πœ‹πœ‹πœ‹πœ‹² Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna 3.2.2 Test Protocol Maximum antenna gain to comply with MPE limits for Industry Canada Maximum Maximum Equivalent Maximum Conducted Conducted conducted antenna gain Frequency output power output power output power MPE Limit to meet MPE Separation Band Mode Duty Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) Limit (dBi) distance (cm) 850 GSM 50% 848.8 33.1 2051.16 1025.65 0.2628 1.1 20 1900 GSM 50% 1909.8 30.7 1174.90 587.49 0.4575 5.9 20 FDD 2 UMTS 100% 1907.6 24.1 255.27 255.27 0.4571 9.5 20 FDD 4 UMTS 100% 1752.6 24.7 295.12 295.12 0.4314 8.7 20 FDD 5 UMTS 100% 846.6 24.6 285.10 285.10 0.2624 6.7 20 Maximum antenna gain to comply with MPE limits for FCC Maximum Maximum Equivalent Maximum Conducted Conducted conducted antenna gain Frequency output power output power output power MPE Limit to meet MPE Separation Band Mode Duty Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) Limit (dBi) distance (cm) 850 GSM 50% 848.8 33.12 2051.16 1025.65 0.5659 4.4 20 1900 GSM 50% 1909.8 30.7 1174.90 587.49 1.0000 9.3 20 FDD 2 UMTS 100.0% 1907.6 24.07 255.27 255.27 1.0000 12.9 20 FDD 4 UMTS 100.0% 1752.6 24.7 295.12 295.12 1.0000 12.3 20 FDD 5 UMTS 100.0% 846.6 24.55 285.10 285.10 0.5644 10.0 20 Assessment Reference: MDE_UBLOX_1918_MPE01 Page 8 of 14

3.2.3 Conclusion Max gain for Maximum Max gain for Industry gain to be Band FCC MPE Canada MPE compliant Limits Limits with all limits 850 4.4 1.1 1.1 1900 9.3 5.9 5.9 FDD 2 12.9 9.5 9.5 FDD 4 12.3 8.7 8.7 FDD 5 10.0 6.7 6.7 Gain expressed in dBi Assessment Reference: MDE_UBLOX_1918_MPE01 Page 9 of 14

3.3 RF Exposure Evaluation for multiple transmitters in co-location Standards OET Bulletin 65 Edition 97-01 August 1997 RSS-102 Issue 5 – March 2015 3.3.1 Co-Location Considerations The calculation below is used to consider situations in which simultaneous exposure to fields of different frequencies occur. The calculation is performed by the sum of each relative exposure for each equipment according to the following criteria. Where: Seq is the power density of the electromagnetic field at a given distance by a specific transmitter and a defined frequency. Slin is the MPE limit for the frequency being evaluated. 3.3.2 Assumptions 1. Primary transmitter does not support power reduction for multiple time slots on the uplink. 2. Antenna separation from module to human body is ≥ 20cm. 3. Separation distance between co-located transmitting antennas is 0cm. 4. Hypothetical Bluetooth radio is assumed to have an output power of 9.5dBm and an antenna gain of 4dBi. 5. Hypothetical WLAN radio is assumed to have an output power of 19dBm and an antenna gain of 5dBi. 3.3.3 Test Protocol The below table is to determine the MPE values using the maximum gain values obtained in below. These values are informational only. Maximum Max Conducted Conducted Frequency output power output power FCC MPE Limit Power Density Separation Band Mode Duty Cycle (%) (MHZ) (dBm) (mW) (mW/cm²) (mW/cm²) distance (cm) Verdict 850 GSM 50% 848.8 33.12 1025.65 0.5659 0.5245 20 Pass 1900 GSM 50% 1909.8 30.7 587.49 1.0000 0.1857 20 Pass FDD 2 UMTS 100% 1907.6 24.07 255.27 1.0000 0.3212 20 Pass FDD 4 UMTS 100% 1752.6 24.7 295.12 1.0000 0.1857 20 Pass FDD 5 UMTS 100% 846.6 24.55 285.10 0.5644 0.5293 20 Pass Maximum Max Conducted Conducted Frequency output power output power FCC MPE Limit Power Density Separation Band Mode Duty Cycle (%) (MHZ) (dBm) (mW) (mW/cm²) (mW/cm²) distance (cm) Verdict 850 GSM 50% 848.8 33.12 1025.65 0.2628 0.2343 20 Pass 1900 GSM 50% 1909.8 30.7 587.49 0.4575 0.1857 20 Pass Assessment Reference: MDE_UBLOX_1918_MPE01 Page 10 of 14

FDD 2 UMTS 100% 1907.6 24.07 255.27 0.4571 0.3212 20 Pass FDD 4 UMTS 100% 1752.6 24.7 295.12 0.4314 0.1857 20 Pass FDD 5 UMTS 100% 846.6 24.55 285.10 0.2624 0.2364 20 Pass MPE Values for the generic Bluetooth and WLAN radios operating alone. These values are used to calculate the relative exposure for simultaneous transmission with the primary transmitter. MPE Calculation for Single Transmitter installed in Generic host for FCC Maximum ERP Equivalent MPE Limit antenna Power density Separation Radio type Freq (MHz) Duty Cycle ERP (mW) (mW) (mW/cm²) gain(dBi) (mW/cm²) distance (cm) Verdict Bluetooth 2441 64% 8.91 3.72 1.0000 4.0 0.0019 20 Pass WLAN 2412 100% 79.43 79.43 1.0000 5.0 0.0500 20 Pass MPE Calculation for Single Transmitter installed in Generic host for ISED Maximum ERP Equivalent MPE Limit antenna gain Power density Separation Radio type Duty Cycle ERP (mW) (mW) (mW/cm²) (dBi) (mW/cm²) distance (cm) Verdict Bluetooth 64% 8.91 3.72 0.54 4.00 0.0019 20.00 Pass WLAN 100% 79.43 79.43 0.54 5.00 0.0500 20.00 Pass Below are the relative exposure values for the primary, secondary and combined primary + secondary transmitters for both FCC and Industry Canada limits. Relative exposure for Primary Transmitter for FCC Seq Output Power Frequency ---------- OP-Mode Mode (mW) (MHZ) Seq (mW/cm²) Slin (mW/cm²) SLin Verdict 850 GSM 1025.6519 848.8 0.5245 0.5659 0.9268648 Pass 1900 GSM 587.4894 1909.8 0.1857 1.0000 0.185678 Pass FDD 2 UMTS 255.2701 1907.6 0.3212 1.0000 0.3211889 Pass FDD 4 UMTS 295.1209 1752.6 0.1857 1.0000 0.1856652 Pass FDD 5 UMTS 285.1018 846.6 0.5293 0.5644 0.9378719 Pass Relative exposure for Primary Transmitter for ISED Seq Output Power Frequency ---------- OP-Mode Mode (mW) (MHZ) Seq (mW/cm²) Slin (mW/cm²) SLin Verdict 850 GSM 1025.6519 848.8 0.2343 0.2628 0.8913524 Pass 1900 GSM 587.4894 1909.8 0.1857 0.4575 0.4058802 Pass FDD 2 UMTS 255.2701 1907.6 0.3212 0.4571 0.7026515 Pass FDD 4 UMTS 295.1209 1752.6 0.1857 0.4314 0.43039 Pass FDD 5 UMTS 285.1018 846.6 0.2364 0.2624 0.9011969 Pass Assessment Reference: MDE_UBLOX_1918_MPE01 Page 11 of 14

Relative exposure for Secondary transmitter FCC Seq Output power ---------- Transmitter (mW) Seq (mW/cm²) Slin (mW/cm²) SLin Bluetooth 3.72 0.0019 1.0000 0.0019 WLAN 79.43 0.0500 1.0000 0.0500 Assessment Reference: MDE_UBLOX_1918_MPE01 Page 12 of 14

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for ISED and FCC. Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for ISED Compliance Maximum Maximum Maximum Frequency Spri/Slim_pri + (Spri/Slim_pri) + Primary Band Primary Mode Transmitter (MHZ) Seq / SLin Ssec / Slin_Sec (Ssec / Slin_Sec) < 1 Bluetooth 2441 0.0034 850 GSM Wlan 2412 0.0924 0.9872 Compliant LISA-U200 848.8 0.8914 Bluetooth 2441 0.0034 1900 GSM Wlan 2412 0.0924 0.5017 Compliant LISA-U200 1909.8 0.4059 Bluetooth 2441 0.0034 FDD 2 UMTS Wlan 2412 0.0924 0.7985 Compliant LISA-U200 1907.6 0.7027 Bluetooth 2441 0.0034 FDD 4 UMTS Wlan 2412 0.0924 0.5262 Compliant LISA-U200 1752.6 0.4304 Bluetooth 2441 0.0034 FDD 5 UMTS Wlan 2412 0.0924 0.9970 Compliant LISA-U200 846.6 0.9012 Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for FCC Compliance Maximum Maximum Maximum (Spri/Slim_pri) Frequency Spri/Slim_pri + + (Ssec / Primary Band Primary Mode All Transmitters (MHZ) Seq / SLin Ssec / Slin_Sec Slin_Sec) < 1 Bluetooth 2441 0.0019 850 GSM Wlan 2412 0.0500 LISA-U200 848.8 0.9269 0.9787 Compliant Bluetooth 2441 0.0019 1900 GSM Wlan 2412 0.0500 LISA-U200 1909.8 0.1857 0.2375 Compliant Bluetooth 2441 0.0019 FDD 2 UMTS Wlan 2412 0.0500 LISA-U200 1907.6 0.3212 0.3730 Compliant Bluetooth 2441 0.0019 FDD 4 UMTS Wlan 2412 0.0500 0.2375 Compliant Assessment Reference: MDE_UBLOX_1918_MPE01 Page 13 of 14

LISA-U200 1752.6 0.1857 Bluetooth 2441 0.0019 FDD 5 UMTS Wlan 2412 0.0500 LISA-U200 846.6 0.9379 0.9897 Compliant When operating the primary transmitter simultaneously with a generic Bluetooth and WLAN radio, the following antenna gains can be used with the module SARA-U260 while still complying with the exposure limits. dBi (For Industry OP-Mode dBi (For FCC) Canada) 850 4.1 0.6 1900 2.0 2.0 FDD 2 8.0 8.0 FDD 4 5.0 5.0 FDD 5 9.7 6.2 Assessment Reference: MDE_UBLOX_1918_MPE01 Page 14 of 14


Document Created: 2019-09-11 00:37:52
Document Modified: 2019-09-11 00:37:52
Β© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC