Modular approval letter

FCC ID: XPY2AGQN4NNN

Cover Letter(s)

Download: PDF
FCCID_3432245

                                                                                    Doc id: UBX-17023026

                                               Certification Declaration            Rev.: 1.0

                                                                                    Date: 04/10/2016



Modular Request Letter

Issued by:
        u-blox AG
        Zürcherstrasse 68
        CH-8800 Thalwil / Switzerland
        Phone: +41 44 722 74 44
        Fax:    +41 44 722 74 47
        info@u-blox.com


Receiver:

            TUV SUD BABT TCB
            Octagon House,
            Segensworth Road,
            Fareham,
            Hampshire,
            PO15 5RL


Subject: Modular Approval Request
                 • FCC: XPY2AGQN4NNN
                 • IC: 8595A-2AGQN4NNN
                 • Model Name: SARA-R404M

The following attestation addresses the requirements to support modular approval:


Modular approval requirement                        Yes (provide brief statement)         No *

                                                                   Yes
(a) The radio elements must have the
radio frequency circuitry shielded.
Physical components and tuning
capacitor(s) may be located external to
the shield, but must be on the module
assembly

(b) The module must have buffered                                  Yes
modulation/data inputs to ensure that
the device will comply with Part 15
requirements with any type of input
signal

(c) The module must contain power                                  Yes

  Author    Jake Bascon                    Department:     cert                                   Page:    1/2

 Filename   SARA-R410MSARA-R410M_FCC Modular Approval Letter
  M102
                        Copyright © 2013 u-blox SD, Inc. All rights reserved              Confidential
  Rev. 1


                                                                               Doc id: UBX-17023026

                                               Certification Declaration       Rev.: 1.0

                                                                               Date: 04/10/2016

supply regulation on the module

(d) The module must contain a                                      Yes
permanently attached antenna, or contain
a unique antenna connector, and be
marketed and operated only with specific
antenna(s), per Sections 15.203,
15.204(b), 15.204(c), 15.212(a),
2.929(b)
                                                                   Yes
(e) The module must demonstrate
compliance in a stand-alone configuration

(f) The module must be labelled with                               Yes
its permanently affixed FCC ID label, or
use an electronic display (See KDB
Publication 784748 about labelling
requirements)
                                                                   Yes
(g) The module must comply with all
specific rules applicable to the
transmitter. The grantee must provide
comprehensive instructions to explain
compliance requirements

(h) The module must comply with RF                                 Yes
exposure requirements



* Please provide a detailed explanation if the answer is “No.”




___________________________________________________
Jake Bascon, Sr. Certification Engineer




  Author    Jake Bascon                    Department:     cert                              Page:    2/2

 Filename   SARA-R410MSARA-R410M_FCC Modular Approval Letter
  M102
                        Copyright © 2013 u-blox SD, Inc. All rights reserved         Confidential
  Rev. 1



Document Created: 2017-06-20 09:15:15
Document Modified: 2017-06-20 09:15:15

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC