Test Report-MPE

FCC ID: XPY2AGQN1NNN

RF Exposure Info

Download: PDF
FCCID_3771929

                                                           RF Exposure Report

                       Report No.: SA180103E06A

                            FCC ID: XPY2AGQN1NNN

                       Test Model: SARA-R404M

                 Received Date: Jan. 12, 2018

                         Test Date: Jan. 12, 2018

                     Issued Date: Jan. 26, 2018


                         Applicant: u-blox-AG

                          Address: Zuercherstrasse 68 8800 Thalwil, Switzerland



                        Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
                                   Hsin Chu Laboratory
                    Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300,
                                 Taiwan R.O.C.




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report
must not be used by the client to claim product certification, approval, or endorsement by any government agencies.

Report No.: SA180103E06A                                             Page No. 1 / 6                                             Report Format Version: 6.1.1
Reference No.: 180112E07


                                                                   Table of Contents
Release Control Record .................................................................................................................................. 3
1         Certificate of Conformity ...................................................................................................................... 4
2         RF Exposure .......................................................................................................................................... 5
    2.1      Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5
    2.2      MPE Calculation Formula ................................................................................................................... 5
    2.3      Classification ....................................................................................................................................... 5
    2.4      Antenna Gain ...................................................................................................................................... 6
    2.5      Calculation Result ............................................................................................................................... 6




Report No.: SA180103E06A                                             Page No. 2 / 6                                              Report Format Version: 6.1.1
Reference No.: 180112E07


                                          Release Control Record


Issue No.             Description                                         Date Issued
SA180103E06A          Original release.                                   Jan. 26, 2018




Report No.: SA180103E06A                     Page No. 3 / 6        Report Format Version: 6.1.1
Reference No.: 180112E07


1    Certificate of Conformity


            Product: LTE CAT-M1 modem

              Brand: u-blox-AG

        Test Model: SARA-R404M

    Sample Status: ENGINEERING SAMPLE

          Applicant: U-blox-AG

          Test Date: Jan. 12, 2018

         Standards: FCC Part 2 (Section 2.1091)

                           KDB 447498 D01 General RF Exposure Guidance v06
                           IEEE C95.1-1992



The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s EMC characteristics under the conditions specified in this report.




      Prepared by :                                              ,   Date:      Jan. 26, 2018
                                 Claire Kuan / Specialist




     Approved by :                                               ,   Date:      Jan. 26, 2018
                                  May Chen / Manager




Report No.: SA180103E06A                        Page No. 4 / 6                       Report Format Version: 6.1.1
Reference No.: 180112E07


2      RF Exposure

2.1      Limits for Maximum Permissible Exposure (MPE)

    Frequency Range            Electric Field     Magnetic Field       Power Density      Average Time
                                                                                2
         (MHz)                Strength (V/m)      Strength (A/m)         (mW/cm )           (minutes)
                               Limits For General Population / Uncontrolled Exposure
        0.3-1.34                   614                  1.63               (100)*                30
                                                                                  2
         1.34-30                  824/f                2.19/f             (180/f )*              30
         30-300                    27.5                0.073                0.2                  30
        300-1500                    …                    …                 f/1500                30
      1500-100,000                  …                    …                  1.0                  30

f = Frequency in MHz ; *Plane-wave equivalent power density



2.2      MPE Calculation Formula

                          2
Pd = (Pout*G) / (4*pi*r )
where
                                   2
Pd = power density in mW/cm
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
R = distance between observation point and center of the radiator in cm



2.3      Classification

      The antenna of this product, under normal use condition, is at least 20cm away from the body of the user.
         So, this device is classified as Mobile Device.




Report No.: SA180103E06A                           Page No. 5 / 6                       Report Format Version: 6.1.1
Reference No.: 180112E07


2.4    Antenna Gain



     Gain(dBi)
                             Frequency                                       Connecter             Cable
  Including cable                                  Antenna Type
                               range                                           Type                Length
        loss

        5.2                 777-787MHz                Monopole               i-pex(MHF)            84 mm




2.5    Calculation Result


  Frequency         Max. ERP      Max. EIRP      Max. EIRP
                                                                  Distance    Power Density        Limit
     Band            Power         Power          Power                                2                 2
                                                                    (cm)        (mW/cm )         (mW/cm )
    (MHz)            (dBm)         (dBm)           (mW)
779.5 ~ 784.5        26.67          28.82          762.079          20           0.15161            0.523
Note: Limit of Power Density = F/1500


--- END ---


Conclusion:
The formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1
CPD = Calculation power density
LPD = Limit of power density


WLAN 2.4GHz <Radio 1> + WLAN 5GHz <Radio 2> + + 3G/LTE <Radio 3> + 3G/LTE Modem = 0.21672 / 1 +
0.55951 / 1 + 0.02179 / 0.4665 + 0.02439 / 0.4665 = 0.87523
Therefore the maximum calculations of above situations are less than the “1” limit.




Report No.: SA180103E06A                      Page No. 6 / 6                         Report Format Version: 6.1.1
Reference No.: 180112E07



Document Created: 2018-03-08 20:23:42
Document Modified: 2018-03-08 20:23:42

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC