FCC_modular_approval_AT

FCC ID: XPY1EIQ24NN

Cover Letter(s)

Download: PDF
FCCID_3613780

FCC                                                         Contact                 Andreas Tübel
Federal Communications Commission                           Phone                   +49 (0) 2102 749 336
                                                            Fax                     +49 (0) 2102 749 990




Modular Approval Request - FCC ID: XPY1EIQ24NN



Dear Application Examiner,


the module “LARA-R202” is seeking FCC authorization as a modular transmitter.

The requirement of the FCC part 15.212 are met.

The following requirements are fulfilled:


1. The modular transmitter must have its own RF shielding
The radio portion of the module has its own RF shielding.

2. The modular transmitter must have buffered modulation/data inputs
The module has a memory management unit inside of the IC. It buffers the data
inputs.

3. The modular transmitter must have its own power supply regulation
The IC contains an own voltage regulation. In case of changes in the supply voltage
VCC (for example caused by temperature changes or other effects), the internal
voltage will be stabilized.

4. The modular transmitter must comply with the antenna requirements of
Section 15.203 and 15.204c
Not applicable to licensed transmitters. Module is professionally installed and antenna gain
is listed in the installation instructions.

5. The modular transmitter must be tested in a stand-alone configuration
The EUT was tested in a stand-alone configuration.

6. The modular transmitter must be labelled with its own FCC ID number
The Module is labelled with its own FCC ID.




                                                                                               1|Page


 7. The modular transmitter must comply with any specific rule or operating
 requirements applicable to the transmitter and the manufacturer must
 provide adequate instructions along with the module to explain any such
 requirements.
 The EUT is compliant with all applicable FCC rules.


 8. The modular transmitter must comply with any applicable RF exposure
 requirements.
 This device has been assessed for mobile use and complies with the limits.


 Please contact us if you have any additional questions.



 Best Regards,
 Andreas Tübel
 Project Manager
 7layers GmbH

Date: 2017-09-21                              Signature:




 7layers – a Bureau Veritas Group Company                                     www.7layers.com
                                                                                       2 of 2



Document Created: 2017-10-06 11:32:39
Document Modified: 2017-10-06 11:32:39

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC