MDE_UBLOX_1712_MPEb_LARAR202_SIGNED

FCC ID: XPY1EIQ24NN

RF Exposure Info

Download: PDF
FCCID_3613752

RF Exposure and Maximum ERP/EIRP Assessment For LARA-R202 UMTS/HSPA/LTE data and voice module FCC ID: XPY1EIQ24NN IC: 8595A-1EIQ24NN Assessment Reference: MDE_UBLOX_1712_MPEb Test Laboratory: 7layers GmbH Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Geschäftsführer/ Borsigstraße 11 Managing Directors: Registergericht/registered: a Bureau Veritas 40880 Ratingen, Germany Frank Spiller Düsseldorf HRB 75554 Group Company T +49 (0) 2102 749 0 Bernhard Retka USt-Id.-Nr./VAT-No. DE203159652 F +49 (0) 2102 749 350 Alexandre Norré-Oudard Steuer-Nr./TAX-No. 147/5869/0385 www.7layers.com Commerzbank AG Account No. 303 016 000 Bank Code 300 400 00 IBAN DE81 3004 0000 0303 0160 00 Swift Code COBADEFF

Table of Contents Summary 3 Technical Report Summary 3 Administrative Data 4 Testing Laboratory 4 Project Data 4 Applicant Data 4 Manufacturer Data 4 Test object Data 5 General EUT Description 5 EUT Main components 5 Ancillary Equipment 5 Auxiliary Equipment 5 Evaluation Results 6 Maximum ERP / EIRP 6 RF Exposure Evaluation for Module 7 RF Exposure Evaluation for multiple transmitters in co-location 9 Co-Location Considerations 9 Assumptions 9 Assessment Reference: MDE_UBLOX_1712_MPEb Page 2 of 13

Zlayers _/ A Bureau Veritas Group Company 0 Summary 0.1 Technical Report Summary Type of Report RF Exposure and Maximum ERP/EIRP Assessment for a UMTS and LTE radio module. Including RF Exposure for use with co—located radios on generic host device. 4 Applicable FCC and ISED Rules For RF Exposure: OET Bulletin 65 Edition 97—01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS—102 Issue 5 — March 2015 For Maximum ERP/EIRP: FCC 47 CFR §22.913 IC SRSP—503 Issue 7, September 2008 FCC 47 CFR §24.232 IC SRSP—510 Issue 5, February 2009 FCC 47 CFR §27.50(d) RSS—139, Issue 2 / SRSP—513 Report version control Version Version Release date Changes validity 001 02.10.2017 Initial version valid Responsible for Responsible Accreditation Scope: — for Report: Assessment Reference: MDE_UBLOX_1712_MPEb Page 3 of 13

Administrative Data Testing Laboratory Company Name: 7Layers GmbH Address Borsigstr. 11 40880 Ratingen Germany This facility has been fully described in a report submitted to the FCC and accepted under the registration number 96716. The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D‐PL‐12140‐01‐01 Responsible for Accreditation Scope: Dipl.‐Ing. Bernhard Retka Dipl.‐Ing. Robert Machulec Dipl.‐Ing. Andreas Petz Dipl.‐Ing. Marco Kullik Report Template Version: 2016‐08‐30 Project Data Responsible for assessment and report: Mr. Andreas Tübel Date of Report: 2017‐08‐30 Applicant Data Company Name: u‐blox AG Address: Zürcherstrasse 68, CH-8800 Thalwil Switzerland Contact Person: Giulio Comar Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_1712_MPEb Page 4 of 13

Test object Data General EUT Description Equipment under Test UMTS/LTE Module Type Designation: LARA‐R202 Kind of Device: UMTS/LTE Module UMTS/LTE CAT 8/1 FCC ID: XPY1EIQ24NN IC Number: 8595A‐1EIQ24NN General product description: The EUT is Cellular radio module supporting UMTS and LTE EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment Type Serial No. HW Status SW Status under Test Designation EUT A (Code: UMTS/LTE LARA-R202 357649070014041 273A02 30.42 DE1015054aek04) Module Remark: EUT A is equipped with a temporary antenna connector. The Module is not sold with a predefined antenna. NOTE: The short description is used to simplify the identification of the EUT in this test report. Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Ancillary Equipment can influence the test results. Short Equipment Type HW Status SW Status Serial no. FCC ID Description under Test Designation AE 1 AC/DC UUX324- - - G05- – converter 1215 0122293 AE 2 Evaluation EVB-WL3 NO_EVK_CS - - - test board _191A00 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Auxiliary Equipment can influence the test results. Short Equipment Type Serial no. HW Status SW Status FCC ID Description under Test Designation N/A – Assessment Reference: MDE_UBLOX_1712_MPEb Page 5 of 13

Evaluation Results Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 (FDD5 WCDMA/HSUPA/HSDPA/LTE) IC RSS‐132, Issue 3 FCC 47 CFR §24.232 (FDD2 WCDMA/HSUPA/HSDPA/LTE) IC RSS‐133 Issue 6 FCC 47 CFR §27.50(d) (FDD4,12 LTE) RSS‐139, Issue 2 / SRSP‐513 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP‐503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7 Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent ERIP value of 11.5 Watts. For all other limits, refer to the values stipulated in the corresponding tables. Test Protocol Maximum Maximum Conducted Maximum Freq of antenna output Conducted highest FCC / IC gain to Duty power output power EIRP limit meet EIRP Band Mode Cycle (%) Frequency (MHZ) (dBm) power (mW) (MHz) (mW) Limit (dBi) FDD 2 UMTS 100.0% 1850 ‐ 1907.6 24.27 267.30064 1907.60 2000 8.7 FDD 5 UMTS 100.0% 824 ‐ 846.6 23.57 227.50974 836.00 11484 17.0 eFDD 2 LTE 100.0% 1850‐1910 23.43 220.29265 1902.50 2000 9.6 eFDD 4 LTE 100.0% 1710‐1755 23.55 226.46443 1732.50 1000 6.5 eFDD 5 LTE 100.0% 824 ‐ 849 23 199.52623 825.50 11484 17.6 eFDD12 LTE 100.0% 698‐716 23.12 205.11622 711.00 4921 13.8 Conclusion All gains in (dBi) Max gain to be Max gain to be Max gain to be Maximum gain to used to comply Band used to comply used to comply be compliant with with FCC MPE with EIRP Limits with IC MPE Limits all limits Limits FDD 2 8.7 12.5 9.1 8.7 FDD 5 17.0 10.0 6.7 6.7 eFDD 2 9.6 13.0 9.6 9.6 eFDD 4 6.5 13.0 9.3 6.5 eFDD 5 17.6 10.4 7.1 7.1 eFDD12 13.8 9.8 6.7 6.7 Assessment Reference: MDE_UBLOX_1712_MPEb Page 6 of 13

RF Exposure Evaluation for Module Standards OET Bulletin 65 Edition 97‐01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS‐102 Issue 5 – March 2015 Test limits As specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure. Frequency range (MHz) Power density (mW/cm²) 300 – 1,500 f/1500 1,500 – 100,000 1.0 Limits specified per RSS‐102, Issue 5. Frequency range (MHz) Power density (W/m²) Power density (mW/cm²) 300 – 6000 0.02619 f0.6834 mW/cm² = W/m² * 0.1 Equation OET bulletin 65, page 18, edition 97‐01: ² Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Test Protocol Maximum antenna gain to comply with MPE limits for FCC Maximum Maximum Maximum Equivalent antenna Conducted Conducted conducted gain to output output output meet Separation Duty Frequency power power power MPE Limit MPE Limit distance Band Mode Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) (dBi) (cm) FDD 2 UMTS 100.0% 1907.6 24.5 281.84 281.84 1.0000 12.5 20 FDD 5 UMTS 100.0% 836.0 24.5 281.84 281.84 0.5573 10.0 20 eFDD 2 LTE 100.0% 1902.5 24 251.19 251.19 1.0000 13.0 20 eFDD 4 LTE 100.0% 1732.5 24 251.19 251.19 1.0000 13.0 20 eFDD 5 LTE 100.0% 825.5 24 251.19 251.19 0.5503 10.4 20 eFDD12 LTE 100.0% 711.0 24 251.19 251.19 0.4740 9.8 20 * Conducted output power values bases on “Tune‐up” information provided by manufacturer. Assessment Reference: MDE_UBLOX_1712_MPEb Page 7 of 13

Maximum antenna gain to comply with MPE limits for Industry Canada Maximum Maximum Maximum Equivalent antenna Conducted Conducted conducted gain to output output output meet Separation Duty Frequency power power power MPE Limit MPE Limit distance Band Mode Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) (dBi) (cm) FDD 2 UMTS 100% 1907.6 24.5 281.84 281.84 0.4571 9.1 20 FDD 5 UMTS 100% 836.0 24.5 281.84 281.84 0.2601 6.7 20 eFDD 2 LTE 100% 1902.5 24.0 251.19 251.19 0.4563 9.6 20 eFDD 4 LTE 100% 1732.5 24.0 251.19 251.19 0.4280 9.3 20 eFDD 5 LTE 100% 825.5 24.0 251.19 251.19 0.2579 7.1 20 eFDD12 LTE 100% 711.0 24.0 251.19 251.19 0.2329 6.7 20 * Conducted output power values bases on “Tune‐up” information provided by manufacturer. Conclusion Max gain Maximum gain Max gain for for to be Band FCC MPE Industry compliant with Limits Canada all limits MPE Limits FDD 2 12.5 9.1 9.1 FDD 5 10.0 6.7 6.7 eFDD 2 13.0 9.6 9.6 eFDD 4 13.0 9.3 9.3 eFDD 5 10.4 7.1 7.1 eFDD12 9.8 6.7 6.7 Assessment Reference: MDE_UBLOX_1712_MPEb Page 8 of 13

RF Exposure Evaluation for multiple transmitters in co‐location Standards OET Bulletin 65 Edition 97‐01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS‐102 Issue 5 – March 2015 Co‐Location Considerations The calculation below is used to consider situations in which simultaneous exposure to fields of different frequencies occur. The calculation is performed by the sum of each relative exposure for each equipment according to the following criteria. Where: Seq is the power density of the electromagnetic field at a given distance by a specific transmitter and a defined frequency. Slin is the MPE limit for the frequency being evaluated. Assumptions 1. Primary transmitter does not support power reduction for multiple time slots on the uplink. 2. Antenna separation from module to human body is ≥ 20cm. 3. Separation distance between co‐located transmitting antennas is 0cm. 4. Hypothetical Bluetooth radio is assumed to have an output power of 9.5dBm and an antenna gain of 4dBi. 5. Hypothetical WLAN radio is assumed to have an output power of 19dBm and an antenna gain of 5dBi. Test Protocol The below table is to determine the MPE values using the maximum gain values obtained in section 3.3.4 of this document. OP mode‐1 – FOR FCC ONLY Maximum Max Conducted Conducted output output FCC MPE Power Separation Duty Frequency power power Limit Density distance Band Mode Cycle (%) (MHZ) (dBm) (mW) (mW/cm²) (mW/cm²) (cm) Verdict FDD 2 UMTS 100% 1907.6 24.5 281.84 1.0000 0.4353 20 Pass FDD 5 UMTS 100% 836.0 24.5 281.84 0.5573 0.5234 20 Pass eFDD 2 LTE 100% 1902.5 24 251.19 1.0000 0.4537 20 Pass eFDD 4 LTE 100% 1732.5 24 251.19 1.0000 0.2207 20 Pass eFDD 5 LTE 100% 825.5 24 251.19 0.5503 0.5115 20 Pass eFDD12 LTE 100% 711.0 24 251.19 0.4740 0.4475 20 Pass * Conducted output power values bases on “Tune‐up” information provided by manufacturer. Assessment Reference: MDE_UBLOX_1712_MPEb Page 9 of 13

OP mode‐1 – FOR Industry Canada ONLY Maximum Max Conducted Conducted output output IC MPE Power Separation Duty Frequency power power Limit Density distance Band Mode Cycle (%) (MHZ) (dBm) (mW) (mW/cm²) (mW/cm²) (cm) Verdict FDD 2 UMTS 100% 1907.6 24.5 281.84 0.4571 0.4062 20 Pass FDD 5 UMTS 100% 836.0 24.5 281.84 0.2601 0.2337 20 Pass eFDD 2 LTE 100% 1902.5 24 251.19 0.4563 0.4072 20 Pass eFDD 4 LTE 100% 1732.5 24 251.19 0.4280 0.2207 20 Pass eFDD 5 LTE 100% 825.5 24 251.19 0.2579 0.2285 20 Pass eFDD12 LTE 100% 711.0 24 251.19 0.2329 0.2093 20 Pass MPE Values for the generic Bluetooth and WLAN radios operating alone. These values are used to calculate the relative exposure for simultaneous transmission with the primary transmitter. MPE Calculation for Single Transmitter installed in Generic host for FCC ERP Separation Duty Equivalent MPE Limit Maximum Power distance Radio type Cycle ERP (mW) (mW) (mW/cm²) antenna gain density (cm) Verdict Bluetooth 64% 8.91 3.72 1.0000 4.0 0.0019 20 Pass WLAN 100% 79.43 79.43 1.0000 5.0 0.0500 20 Pass MPE Calculation for Single Transmitter installed in Generic host for Industry Canada ERP Separation Duty Equivalent MPE Limit Maximum Power distance Radio type Cycle ERP (mW) (mW) (mW/cm²) antenna gain density (cm) Verdict Bluetooth 64% 8.91 3.72 0.54 4.00 0.0019 20.00 Pass WLAN 100% 79.43 79.43 0.54 5.00 0.0500 20.00 Pass Below are the relative exposure values for the primary, secondary and combined primary + secondary transmitters for both FCC and Industry Canada limits. OP mode‐1 Relative exposure for Primary Transmitter for FCC Seq Output ‐‐‐‐‐‐‐‐‐‐ OP‐Mode Mode power Frequency (MHZ) Seq (mW/cm²) Slin (mW/cm²) SLin Verdict FDD 2 UMTS 281.8383 1907.6 0.4353 1.0000 0.4352718 Pass FDD 5 UMTS 281.8383 836.0 0.5234 0.5573 0.9390932 Pass eFDD 2 LTE 251.1886 1902.5 0.4537 1.0000 0.4536914 Pass eFDD 4 LTE 251.1886 1732.5 0.2207 1.0000 0.2206635 Pass eFDD 5 LTE 251.1886 825.5 0.5115 0.5503 0.9293897 Pass eFDD12 LTE 251.1886 711.0 0.4475 0.4740 0.9440729 Pass Assessment Reference: MDE_UBLOX_1712_MPEb Page 10 of 13

Relative exposure for Primary Transmitter for Industry Canada Seq Output ‐‐‐‐‐‐‐‐‐‐ OP‐Mode Mode power Frequency (MHZ) Seq (mW/cm²) Slin (mW/cm²) SLin Verdict FDD 2 UMTS 281.8383 1907.6 0.4062 0.4571 0.8886689 Pass FDD 5 UMTS 281.8383 836.0 0.2337 0.2601 0.8985852 Pass eFDD 2 LTE 251.1886 1902.5 0.4072 0.4563 0.8923486 Pass eFDD 4 LTE 251.1886 1732.5 0.2207 0.4280 0.5155677 Pass eFDD 5 LTE 251.1886 825.5 0.2285 0.2579 0.8859388 Pass eFDD12 LTE 251.1886 711.0 0.2093 0.2329 0.8988365 Pass Relative exposure for Secondary transmitter for FCC Transmitter Output power Seq (mW/cm²) Slin (mW/cm²) Seq ‐‐‐‐‐‐‐‐‐‐ SLin Bluetooth 3.72 0.0019 1.0000 0.0019 WLAN 79.43 0.0500 1.0000 0.0500 Relative exposure for Secondary transmitter for Industry Canada Transmitter Output power Seq (mW/cm²) Slin (mW/cm²) Seq ‐‐‐‐‐‐‐‐‐‐ SLin Bluetooth 3.72 0.0019 0.5410 0.003431873 WLAN 79.43 0.0500 0.5410 0.092370053 Assessment Reference: MDE_UBLOX_1712_MPEb Page 11 of 13

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for FCC Maximum Compliance Seq / SLin Maximum Maximum Spri/Slim_pri (Spri/Slim_pri) Primary Primary All Frequency + Ssec / + (Ssec / Band Mode Transmitters (MHZ) Slin_Sec Slin_Sec) < 1 Bluetooth 2441 0.0019 FDD 2 UMTS Wlan 2412 0.0500 Toby‐L4006 1907.6 0.4353 0.4871 Compliant Bluetooth 2441 0.0019 FDD 5 UMTS Wlan 2412 0.0500 Toby‐L4006 836.0 0.9391 0.9909 Compliant Bluetooth 2441 0.0019 eFDD 2 LTE Wlan 2412 0.0500 Toby‐L4006 1902.5 0.4537 0.5055 Compliant Bluetooth 2441 0.0019 eFDD 4 LTE Wlan 2412 0.0500 Toby‐L4006 1732.5 0.2207 0.2725 Compliant Bluetooth 2441 0.0019 eFDD 5 LTE Wlan 2412 0.0500 Toby‐L4006 825.5 0.9294 0.9812 Compliant Bluetooth 2441 0.0019 eFDD12 LTE Wlan 2412 0.0500 Toby‐L4006 711.0 0.9441 0.9959 Compliant Assessment Reference: MDE_UBLOX_1712_MPEb Page 12 of 13

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for ISED Maximum Compliance Maximum Maximum Spri/Slim_pri (Spri/Slim_pri) Primary Primary Frequency Seq / SLin + Ssec / + (Ssec / Band Mode Transmitter (MHZ) (mW/cm²) Slin_Sec Slin_Sec) < 1 Bluetooth 2441 0.0034 FDD 2 UMTS Wlan 2412 0.0924 0.9845 Compliant Toby‐L4006 1907.6 0.8887 Bluetooth 2441 0.0034 FDD 5 UMTS Wlan 2412 0.0924 0.9944 Compliant Toby‐L4006 836 0.8986 Bluetooth 2441 0.0034 eFDD 2 LTE Wlan 2412 0.0924 0.9882 Compliant Toby‐L4006 1902.5 0.8923 Bluetooth 2441 0.0034 eFDD 4 LTE Wlan 2412 0.0924 0.6114 Compliant Toby‐L4006 1732.5 0.5156 Bluetooth 2441 0.0034 eFDD 5 LTE Wlan 2412 0.0924 0.9817 Compliant Toby‐L4006 825.5 0.8859 Bluetooth 2441 0.0034 eFDD12 LTE Wlan 2412 0.0924 0.9946 Compliant Toby‐L4006 711 0.8988 When operating the primary transmitter simultaneously with a generic Bluetooth and WLAN radio, the following antenna gains can be used with the module LARA-R202 while still complying with the exposure limits. Band dBi (For FCC) dBi (For Industry Canada) FDD 2 8.9 8.6 FDD 5 9.7 6.2 eFDD 2 9.6 9.1 eFDD 4 6.5 6.5 eFDD 5 10.1 6.6 eFDD12 9.5 6.2 Assessment Reference: MDE_UBLOX_1712_MPEb Page 13 of 13


Document Created: 2017-10-23 11:34:42
Document Modified: 2017-10-23 11:34:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC