MDE_UBLOX_1717_MPEb_rev2_Final

FCC ID: XPY1EHQ37NN

RF Exposure Info

Download: PDF
FCCID_4047934

RF Exposure and Maximum ERP/EIRP Assessment For TOBY-L4006 FCC ID: XPY1EHQ37NN IC: 8595A-1EHQ37NN Assessment Reference: MDE_UBLOX_1717_MPEb Rev2 Test Laboratory: 7layers GmbH Borsigstraße 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Registergericht registered in: Borsigstraße 11 Geschäftsführer / Düsseldorf, HRB 75554 40880 Ratingen, Germany Managing Directors: USt-IdNr VAT No.: T +49 (0) 2102 749 0 Frank Spiller DE203159652 F +49 (0) 2102 749 350 Bernhard Retka TAX No. 147/5869/0385 www.7layers.com Alexandre Norré-Oudard A Bureau Veritas Group Company

Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 1 Administrative Data 4 1.1 Testing Laboratory 4 1.2 Project Data 4 1.3 Applicant Data 4 1.4 Manufacturer Data 4 2 Test object Data 5 2.1 General EUT Description 5 2.2 EUT Main components 5 2.3 Ancillary Equipment 5 2.4 Auxiliary Equipment 6 3 Evaluation Results 7 3.1 Maximum ERP / EIRP 7 3.2 RF Exposure Evaluation for Module 9 3.3 RF Exposure Evaluation for multiple transmitters in co-location 12 Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 2 of 19

%layers A Bureau Veritas Group Company 0 Summary 0. 1 Technical Report Summary Type of Report RF Exposure and Maximum ERP/EIRP Assessment for a GSM/UMTS/LTE radio module. Including RF Exposure for use with co—located radios on generic host device. Applicable FCC and ISED Rules For RF Exposure: OET Bulletin 65 Edition 97—01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS—102 Issue 5 — March 2015 For Maximum ERP/EIRP: FCC 47 CFR §22.913 IC SRSP—503 Issue 7, September 2008 FCC 47 CFR §24.232 IC SRSP—510 Issue 5, February 2009 FCC 47 CFR §27.50(d) RSS—139, Issue 3 / SRSP—513 Report version control Rev Version Version Release date Changes validity 000 2018.10.12 Initial version Not valid 001 2018.10.15 Added GSM in chapter 0.1/Type of Report Not valid 002 2018.10.17 Correction of SW Version Valid u <— é i Responsible for //j’ 62/7/7}/ Responsible L§JLQ’\_/' e . Accreditation Scope®*: for Report: *ERP/EIRP Measurement Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 3 of 19

1 Administrative Data 1.1 Testing Laboratory Company Name: 7 Layers GmbH Address Borsigstr. 11 40880 Ratingen Germany This facility has been fully described in a report submitted to the FCC and ISED and accepted under the registration number 96716 and ISED 3699A-1. The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D-PL-12140-01-00 Responsible for Accreditation Scope: Dipl.-Ing. Bernhard Retka Dipl.-Ing. Robert Machulec Dipl.-Ing. Andreas Petz Dipl.-Ing. Marco Kullik Dipl.-Ing. Wolfgang Richter Report Template Version: 2017-08-02 1.2 Project Data Responsible for assessment and report: Mr. Sören Berentzen Date of Report: 2018-10-17 1.3 Applicant Data Company Name: u-blox AG Address: Zürcherstrasse 68, CH-8800 Thalwil Switzerland Contact Person: Giulio Comar 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 4 of 19

2 Test object Data 2.1 General EUT Description Equipment under Test GSM/UMTS /LTE Voice/Data Module Type Designation: TOBY-L4006 Kind of Device: GSM/UMTS/LTE Voice/Data Module GSM MSC/UMTS/LTE CAT 33 / 8 / (4/6) FCC ID: FCC ID: XPY1EHQ37NN IC Number: IC: 8595A-1EHQ37NN General product description: The EUT is Cellular radio module supporting GSM/WCDMA/HSDPA/HSUPA/LTE 2.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment Type Serial No. HW Status SW Status under Test Designation EUT A (Code: GSM/UMTS/ TOBY-L4006 355958080034242 294CA0 40.34 DE1015099ba01) LTE Module Remark: EUT A is equipped with a temporary antenna connector. The Module is not sold with a predefined antenna. NOTE: The short description is used to simplify the identification of the EUT in this test report. 2.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Ancillary Equipment can influence the test results. Short Equipment Type HW Status SW Status Serial no. FCC ID Description under Test Designation AE 1 AC/DC UUX324- - - E09- – converter 1215 0291981 AE 2 Evaluation EVB-WL3 NO_EVK_CS - - - test board _191A00 Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 5 of 19

2.4 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Auxiliary Equipment can influence the test results. Short Equipment Type Serial no. HW Status SW Status FCC ID Description under Test Designation N/A – Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 6 of 19

3 Evaluation Results 3.1 Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 (GSM 850/FDD5 WCDMA/HSUPA/HSDPA/LTE) IC RSS-132, Issue 3 FCC 47 CFR §24.232 (GSM 1900/FDD2 WCDMA/HSUPA/HSDPA/LTE) IC RSS-133 Issue 6 FCC 47 CFR §27.50(d) (FDD4,7,12,13 LTE) RSS-139, Issue 2 / SRSP-513 3.1.1 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP-503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7 Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent ERIP value of 11.5 Watts. For all other limits, refer to the values stipulated in the corresponding tables. 3.1.2 Test Protocol Maximum Maximum Conducted Maximum antenna output Conducted Freq of gain to Duty Cycle Frequency power output highest FCC EIRP meet EIRP Band Mode (%) (MHZ) (dBm) power (mW) power limit (mW) Limit (dBi) 836.2 - 850 GSM 50,0% 848.8 32,59 1815,515663 848,80 11484 8,0 1850.2 - 1900 GSM 50,0% 1909.8 30,29 1069,054879 1909,80 2000 2,7 1850 - FDD 2 UMTS 100,0% 1907.6 23,79 239,3315756 1907,60 2000 9,2 1710 - FDD 4 UMTS 100,0% 1752.6 24,5 281,8382931 1740,00 1000 5,5 824 - FDD 5 UMTS 100,0% 846.6 23,7 234,4228815 836,00 11484 16,9 eFDD 2 LTE 100,0% 1850-1910 23,52 224,9054606 1902,50 2000 9,5 eFDD 4 LTE 100,0% 1710-1755 23,24 210,862815 1732,50 1000 6,8 eFDD 5 LTE 100,0% 824 - 849 22,96 197,696964 836,69 11484 17,6 eFDD 7 LTE 100,0% 2500-2570 23,3 213,796209 2567,50 1000 6,7 eFDD13 LTE 100,0% 777-787 22,7 186,2087137 782,19 4920 14,2 eFDD12 LTE 100,0% 698-716 23,14 206,0629913 707,70 4921 13,8 Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 7 of 19

3.1.3 Conclusion Max gain to Max gain to Max gain to Maximum be used to be used to be used to gain to be Band comply with comply with comply with IC compliant FCC MPE EIRP Limits MPE Limits with all limits Limits 850 8,0 4,0 0,7 0,7 1900 2,7 9,5 6,1 2,7 FDD 2 9,2 12,5 9,1 9,1 FDD 4 5,5 12,5 8,8 5,5 FDD 5 16,9 9,0 5,7 5,7 eFDD 2 9,5 13,0 9,6 9,5 eFDD 4 6,8 13,0 9,3 6,8 eFDD 5 17,6 10,5 7,2 7,2 eFDD 7 6,7 13,0 10,5 6,7 eFDD13 14,2 10,2 7,0 7,0 eFDD12 13,8 10,2 7,1 7,1 The above table lists the gains which conform to both the EIRP limits and the MPE limits for both ISED and FCC. Gain expressed in dBi. Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 8 of 19

3.2 RF Exposure Evaluation for Module Standards OET Bulletin 65 Edition 97-01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS-102 Issue 5 – March 2015 3.2.1 Test limits As specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure. Frequency range (MHz) Power density (mW/cm²) 300 – 1,500 f/1500 1,500 – 100,000 1.0 Limits specified per RSS-102, Issue 5. Frequency range (MHz) Power density (W/m²) Power density (mW/cm²) 300 – 6000 0.02619 f0.6834 mW/cm² = W/m² * 0.1 𝑃𝐺 𝐸𝐼𝑅𝑃 Equation OET bulletin 65, page 18, edition 97-01: 𝑆= = 4πœ‹π‘… 2 4πœ‹π‘…² Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 9 of 19

3.2.2 Test Protocol Maximum antenna gain to comply with MPE limits for Industry Canada Maximum Maximum Equivalent Maximum Conducted Conducted conducted antenna output output output gain to Separation Frequency power power power MPE Limit meet MPE distance Band Mode Duty Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) Limit (dBi) (cm) 850 GSM 50% 848,8 33,5 2238,72 1119,44 0,2628 0,7 20 1900 GSM 50% 1909,8 30,5 1122,02 561,05 0,4575 6,1 20 FDD 2 UMTS 100% 1907,6 24,5 281,84 281,84 0,4571 9,1 20 FDD 4 UMTS 100% 1740,0 24,5 281,84 281,84 0,4293 8,8 20 FDD 5 UMTS 100% 836,0 25,5 354,81 354,81 0,2601 5,7 20 eFDD 2 LTE 100% 1902,5 24,0 251,19 251,19 0,4563 9,6 20 eFDD 4 LTE 100% 1732,5 24,0 251,19 251,19 0,4280 9,3 20 eFDD 5 LTE 100% 836,7 24,0 251,19 251,19 0,2603 7,2 20 eFDD 7 LTE 100% 2567,5 24,0 251,19 251,19 0,5600 10,5 20 eFDD13 LTE 100% 782,2 24,0 251,19 251,19 0,2486 7,0 20 eFDD12 LTE 100% 707,7 24,0 251,19 251,19 0,2321 7,1 21 * Conducted output power values bases on “Tune-up” information provided by manufacturer. Maximum antenna gain to comply with MPE limits for FCC Maximum Maximum Equivalent Maximum Conducted Conducted conducted antenna output output output gain to Separation Frequency power power power MPE Limit meet MPE distance Band Mode Duty Cycle (MHZ) (dBm) (mW) (mW) (mW/cm²) Limit (dBi) (cm) 850 GSM 50% 848,8 33,5 2238,72 1119,44 0,5659 4,0 20 1900 GSM 50% 1909,8 30,5 1122,02 561,05 1,0000 9,5 20 FDD 2 UMTS 100,0% 1907,6 24,5 281,84 281,84 1,0000 12,5 20 FDD 4 UMTS 100,0% 1740,0 24,5 281,84 281,84 1,0000 12,5 20 FDD 5 UMTS 100,0% 836,0 25,5 354,81 354,81 0,5573 9,0 20 eFDD 2 LTE 100,0% 1902,5 24 251,19 251,19 1,0000 13,0 20 eFDD 4 LTE 100,0% 1732,5 24 251,19 251,19 1,0000 13,0 20 eFDD 5 LTE 100,0% 836,7 24 251,19 251,19 0,5578 10,5 20 eFDD 7 LTE 100,0% 2567,5 24 251,19 251,19 1,0000 13,0 20 eFDD13 LTE 100,0% 777,0 24 251,19 251,19 0,5215 10,2 20 eFDD12 LTE 100,0% 707,7 24 251,19 251,19 0,4718 10,2 21 * Conducted output power values bases on “Tune-up” information provided by manufacturer. Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 10 of 19

3.2.3 Conclusion Max gain Maximum Max gain for gain to be Band for FCC Industry compliant MPE Limits Canada with all MPE Limits limits 850 4,0 0,7 0,7 1900 9,5 6,1 6,1 FDD 2 12,5 9,1 9,1 FDD 4 12,5 8,8 8,8 FDD 5 9,0 5,7 5,7 eFDD 2 13,0 9,6 9,6 eFDD 4 13,0 9,3 9,3 eFDD 5 10,5 7,2 7,2 eFDD 7 13,0 10,5 10,5 eFDD13 10,2 7,0 7,0 eFDD12 10,2 7,1 7,1 Gain expressed in dBi Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 11 of 19

3.3 RF Exposure Evaluation for multiple transmitters in co-location Standards OET Bulletin 65 Edition 97-01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS-102 Issue 5 – March 2015 3.3.1 Co-Location Considerations The calculation below is used to consider situations in which simultaneous exposure to fields of different frequencies occur. The calculation is performed by the sum of each relative exposure for each equipment according to the following criteria. Where: Seq is the power density of the electromagnetic field at a given distance by a specific transmitter and a defined frequency. Slin is the MPE limit for the frequency being evaluated. 3.3.2 Assumptions 1. Primary transmitter does not support power reduction for multiple time slots on the uplink. 2. Antenna separation from module to human body is ≥ 20cm. 3. Separation distance between co-located transmitting antennas is 0cm. 4. Hypothetical Bluetooth radio is assumed to have an output power of 9.5dBm and an antenna gain of 4dBi. 5. Hypothetical WLAN radio is assumed to have an output power of 19dBm and an antenna gain of 5dBi. 6. Where the maximum allowable gain permitted with respect to EIRP is lower than the maximum allowable gain for relative exposure, the lower gain respecting the EIRP limit shall be used to make the calculation. Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 12 of 19

3.3.3 Test Protocol The below table is to determine the MPE values using the maximum gain values obtained in section 3.3.4 of this document. OP mode-1 – FOR FCC ONLY Maximum Max Conducted Conducted output output FCC MPE Power Separation Duty Cycle Frequency power power Limit Density distance Band Mode (%) (MHZ) (dBm) (mW) (mW/cm²) (mW/cm²) (cm) Verdict 850 GSM 50% 848,8 33,5 1119,44 0,5659 0,5343 20 Pass 1900 GSM 50% 1909,8 30,5 561,05 1,0000 0,2088 20 Pass FDD 2 UMTS 100% 1907,6 24,5 281,84 1,0000 0,4686 20 Pass FDD 4 UMTS 100% 1740,0 24,5 281,84 1,0000 0,1989 20 Pass FDD 5 UMTS 100% 836,0 25,5 354,81 0,5573 0,5234 20 Pass eFDD 2 LTE 100% 1902,5 24 251,19 1,0000 0,4444 20 Pass eFDD 4 LTE 100% 1732,5 24 251,19 1,0000 0,2370 20 Pass eFDD 5 LTE 100% 836,7 24 251,19 0,5578 0,5234 20 Pass eFDD 7 LTE 100% 2567,5 24 251,19 1,0000 0,2337 20 Pass eFDD13 LTE 100% 782,2 24 251,19 0,5215 0,4906 20 Pass eFDD12 LTE 100% 707,7 24 251,19 0,4718 0,4373 20 Pass * Conducted output power values bases on “Tune-up” information provided by manufacturer. OP mode-1 – FOR Industry Canada ONLY Maximum Max Conducted Conducted output output FCC MPE Power Separation Duty Cycle Frequency power power Limit Density distance Band Mode (%) (MHZ) (dBm) (mW) (mW/cm²) (mW/cm²) (cm) Verdict 850 GSM 50% 848,8 33,5 1119,44 0,2628 0,2333 20 Pass 1900 GSM 50% 1909,8 30,5 561,05 0,4575 0,2088 20 Pass FDD 2 UMTS 100% 1907,6 24,5 281,84 0,4571 0,4072 20 Pass FDD 4 UMTS 100% 1740,0 24,5 281,84 0,4293 0,1989 20 Pass FDD 5 UMTS 100% 836,0 25,5 354,81 0,2601 0,2338 20 Pass eFDD 2 LTE 100% 1902,5 24 251,19 0,4563 0,4072 20 Pass eFDD 4 LTE 100% 1732,5 24 251,19 0,4280 0,2370 20 Pass eFDD 5 LTE 100% 836,7 24 251,19 0,2603 0,2338 20 Pass eFDD 7 LTE 100% 2567,5 24 251,19 0,5600 0,2337 20 Pass eFDD13 LTE 100% 782,2 24 251,19 0,2486 0,2242 20 Pass eFDD12 LTE 100% 707,7 24 251,19 0,2321 0,2093 20 Pass MPE Values for the generic Bluetooth and WLAN radios operating alone. These values are used to calculate the Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 13 of 19

relative exposure for simultaneous transmission with the primary transmitter. MPE Calculation for Single Transmitter installed in Generic host for FCC ERP Maximum Power Separation Duty Equivalent MPE Limit antenna gain density distance Radio type Cycle ERP (mW) (mW) (mW/cm²) dBi (mW/cm²) (cm) Verdict Bluetooth 64% 8.91 3.72 1.0000 4.0 0.0019 20 Pass WLAN 100% 79.43 79.43 1.0000 5.0 0.0500 20 Pass MPE Calculation for Single Transmitter installed in Generic host for Industry Canada ERP Maximum Power Separation Duty Equivalent MPE Limit antenna gain density distance Radio type Cycle ERP (mW) (mW) (mW/cm²) dBi (mW/cm²) (cm) Verdict Bluetooth 64% 8.91 3.72 0.54 4.00 0.0019 20.00 Pass WLAN 100% 79.43 79.43 0.54 5.00 0.0500 20.00 Pass Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 14 of 19

Below are the relative exposure values for the primary, secondary and combined primary + secondary transmitters for both FCC and Industry Canada limits. Relative exposure for Primary Transmitter for FCC Seq ---------- Output Frequency Slin OP-Mode Mode Power (MHZ) Seq (mW/cm²) SLin Verdict 850 GSM 1119,4379 848,8 0,5343 0,5659 0,944299117 Pass 1900 GSM 561,0480 1909,8 0,2088 1,0000 0,20881443 Pass FDD 2 UMTS 281,8383 1907,6 0,4686 1,0000 0,468554925 Pass FDD 4 UMTS 281,8383 1740,0 0,1989 1,0000 0,198943847 Pass FDD 5 UMTS 354,8134 836,0 0,5234 0,5573 0,939093159 Pass eFDD 2 LTE 251,1886 1902,5 0,4444 1,0000 0,444386142 Pass eFDD 4 LTE 251,1886 1732,5 0,2370 1,0000 0,236990268 Pass eFDD 5 LTE 251,1886 836,7 0,5234 0,5578 0,938318709 Pass eFDD 7 LTE 251,1886 2567,5 0,2337 1,0000 0,233738639 Pass eFDD13 LTE 251,1886 782,2 0,4906 0,5215 0,940750838 Pass eFDD12 LTE 251,1886 707,7 0,4373 0,4718 0,926885184 Pass Relative exposure for Primary Transmitter for ISED Seq Output Frequency Slin ---------- OP-Mode Mode Power (MHZ) Seq (mW/cm²) SLin Verdict 850 GSM 1119,4379 848,8 0,2333 0,2628 0,887447369 Pass 1900 GSM 561,0480 1909,8 0,2088 0,4575 0,456454912 Pass FDD 2 UMTS 281,8383 1907,6 0,4072 0,4571 0,890717487 Pass FDD 4 UMTS 281,8383 1740,0 0,1989 0,4293 0,463450822 Pass FDD 5 UMTS 354,8134 836,0 0,2338 0,2601 0,898777987 Pass eFDD 2 LTE 251,1886 1902,5 0,4072 0,4563 0,892348571 Pass eFDD 4 LTE 251,1886 1732,5 0,2370 0,4280 0,553714273 Pass eFDD 5 LTE 251,1886 836,7 0,2338 0,2603 0,898271383 Pass eFDD 7 LTE 251,1886 2567,5 0,2337 0,5600 0,417383782 Pass eFDD13 LTE 251,1886 782,2 0,2242 0,2486 0,902132892 Pass eFDD12 LTE 251,1886 707,7 0,2093 0,2321 0,901698688 Pass Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 15 of 19

Relative exposure for Secondary transmitter for FCC OP-Mode Transmitter Output Seq (mW/cm²) Slin (mW/cm²) Seq power ---------- SLin 2 Bluetooth 3.72 0.0019 1.0000 0.001856652 3 WLAN 79.43 0.0500 1.0000 0.049972435 4 Bluetooth 3.72 0.0019 1.0000 0.001856652 WLAN 79.43 0.0500 1.0000 0.049972435 Relative exposure for Secondary transmitter for Industry Canada OP-Mode Transmitter Output Seq (mW/cm²) Slin (mW/cm²) Seq power ---------- SLin 2 Bluetooth 3.72 0.0019 0.5410 0.003431873 3 WLAN 79.43 0.0500 0.5410 0.092370053 4 Bluetooth 3.72 0.0019 0.5410 0.003431873 WLAN 79.43 0.0500 0.5410 0.092370053 Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 16 of 19

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for FCC Compliance Maximum Maximum Maximum (Spri/Slim_pri) All Frequency Spri/Slim_pri + + (Ssec / Primary Band Primary Mode Transmitters (MHZ) Seq / SLin Ssec / Slin_Sec Slin_Sec) < 1 Bluetooth 2441 0,0019 850 GSM Wlan 2412 0,0500 Toby-L4006 848,8 0,9443 0,9961 Compliant Bluetooth 2441 0,0019 1900 GSM Wlan 2412 0,0500 Toby-L4006 1909,8 0,2088 0,2606 Compliant Bluetooth 2441 0,0019 FDD 2 UMTS Wlan 2412 0,0500 Toby-L4006 1907,6 0,4686 0,5204 Compliant Bluetooth 2441 0,0019 FDD 4 UMTS Wlan 2412 0,0500 Toby-L4006 1740,0 0,1989 0,2508 Compliant Bluetooth 2441 0,0019 FDD 5 UMTS Wlan 2412 0,0500 Toby-L4006 836,0 0,9391 0,9909 Compliant Bluetooth 2441 0,0019 eFDD 2 LTE Wlan 2412 0,0500 Toby-L4006 1902,5 0,4444 0,4962 Compliant Bluetooth 2441 0,0019 eFDD 4 LTE Wlan 2412 0,0500 Toby-L4006 1732,5 0,2370 0,2888 Compliant Bluetooth 2441 0,0019 eFDD 5 LTE Wlan 2412 0,0500 Toby-L4006 836,7 0,9383 0,9901 Compliant Bluetooth 2441 0,0019 eFDD 7 LTE Wlan 2412 0,0500 Toby-L4006 2567,5 0,2337 0,2856 Compliant Bluetooth 2441 0,0019 eFDD13 LTE Wlan 2412 0,0500 Toby-L4006 782,2 0,9408 0,9926 Compliant Bluetooth 2441 0,0019 eFDD12 LTE Wlan 2412 0,0500 Toby-L4006 707,7 0,9269 0,9787 Compliant Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 17 of 19

Simultaneous exposure of Primary and Secondary transmitter installed in generic host device for ISED Compliance Maximum Maximum Maximum (Spri/Slim_pri) Frequency Spri/Slim_pri + + (Ssec / Primary Band Primary Mode Transmitter (MHZ) Seq / SLin Ssec / Slin_Sec Slin_Sec) < 1 Bluetooth 2441 0,0034 850 GSM Wlan 2412 0,0924 0,9832 Compliant Toby-L4006 848,8 0,8874 Bluetooth 2441 0,0034 1900 GSM Wlan 2412 0,0924 0,5523 Compliant Toby-L4006 1909,8 0,4565 Bluetooth 2441 0,0034 FDD 2 UMTS Wlan 2412 0,0924 0,9865 Compliant Toby-L4006 1907,6 0,8907 Bluetooth 2441 0,0034 FDD 4 UMTS Wlan 2412 0,0924 0,5593 Compliant Toby-L4006 1740 0,4635 Bluetooth 2441 0,0034 FDD 5 UMTS Wlan 2412 0,0924 0,9946 Compliant Toby-L4006 836 0,8988 Bluetooth 2441 0,0034 eFDD 2 LTE Wlan 2412 0,0924 0,9882 Compliant Toby-L4006 1902,5 0,8923 Bluetooth 2441 0,0034 eFDD 4 LTE Wlan 2412 0,0924 0,6495 Compliant Toby-L4006 1732,5 0,5537 Bluetooth 2441 0,0034 eFDD 5 LTE Wlan 2412 0,0924 0,9941 Compliant Toby-L4006 836,69 0,8983 Bluetooth 2441 0,0034 eFDD 7 LTE Wlan 2412 0,0924 0,5132 Compliant Toby-L4006 2567,5 0,4174 Bluetooth 2441 0,0034 eFDD13 LTE Wlan 2412 0,0924 0,9979 Compliant Toby-L4006 782,19 0,9021 Bluetooth 2441 0,0034 eFDD12 LTE Wlan 2412 0,0924 0,9975 Compliant Toby-L4006 707,7 0,9017 Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 18 of 19

When operating the primary transmitter simultaneously with a generic Bluetooth and WLAN radio, the following antenna gains can be used with the module TOBY-L4006 while still complying with the exposure limits. Band dBi (For FCC) dBi (For Industry Canada) 850 3,8 0,2 1900 2,7 2,7 FDD 2 9,2 8,6 FDD 4 5,5 5,5 FDD 5 8,7 5,2 eFDD 2 9,5 9,1 eFDD 4 6,8 6,8 eFDD 5 10,2 6,7 eFDD 7 6,7 6,7 eFDD13 9,9 6,5 eFDD12 9,4 6,2 Assessment Reference: MDE_UBLOX_1717_MPEb Rev 2 Page 19 of 19


Document Created: 2018-10-17 13:31:35
Document Modified: 2018-10-17 13:31:35
Β© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC