Class II Permissive Change Letter

FCC ID: XPY1CGM5NNN

Cover Letter(s)

Download: PDF
FCCID_4089533

Doc id: UBX—18066031 @b|0x Certification Declaration Rev.: 1.0 Date: 16—Nov—2018 FCC Class II and ISED Class IV Permissive Change Request Issued by: u—blox AG Ziircherstrasse 68 CH—8800 Thalwil / Switzerland Phone: +41 44 722 74 44 Fax: +41 44 722 74 47 info@u—blox.com Subject: FCC Class II Permissive Change and ISED Class IV Permissive Change request on: Model: SARA—U201 FCC ID: XPY1CGMSNNN ISED: 8595A—1CGMSNNN Dear Examiner, For the above indicated device and pursuant FCC §2.1043 and IC RSP—100 Sec. 7.5 we, u—blox AG, hereby request the evaluation of a FCC Class II and a ISED Class IV permissive change as described below Our device is going to beintegrated in the G7C device: Model: G7C HMN: G7C The main changes in the modular approval conditions granted to our module, once integrated in the G7C device will be as follows: — The module will be used in portable exposure conditions. Yours sincerely, / , / //225 CCe 66 2 A— GiulioEQmar Cemf\catlon Managef u—blox \ta\a S.p.A.con socio unico Via Stazione di Prosecco, 15 34010 — Sgonico (Trieste) Italy u—lk{oxHa{la S.p.A. is a wholly owned subsidiary of u—blox AG Author Giulio Comar Department cert Page: 1/1 Filename BlacklineSafety_G7C_SARA—U201_FCC—C2PC_ISED—C4PC_20181116.docx t a1 Copyright © 2016 u—blox talia S.p A. Allrights reserved Confidential Rev.


Document Created: 2019-03-28 06:42:50
Document Modified: 2019-03-28 06:42:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC