modular approval request

FCC ID: XPY1CGM5NNN

Cover Letter(s)

Download: PDF
FCCID_3108169

@blox Ziurcherstrasse 68 8800 Thalwil Switzerland Phone +41 44 722 74 44 Fax +41 44 722 74 47 info@u—blox.com CHE—108.684.750 MWST Issued by: Y Ziurcher Kantonalbank BC—Nr. 700, S.W.L.F.T. ZKBK CH ZZ 80A u—blox AG Zurcherstrasse 68 1100—0243.614 (CHF) C IBAN CH96 0070 0110 0002 4361 4 8800 Thalwil 1300—00293.032 (USD) Switzerland IBAN CH18 0070 0130 0002 9303 2 1300—00293.040 (EUR) IBAN CH93 0070 0130 0002 9304 0 Receiver: 1300—07001.827 (UPY) IBAN CH62 0070 0130 0070 0182 7 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Subject: Modular Approval Statement Date: 01/06/2016 FCC Certification Number: XPY1CGMSNNN Only applicable for ISED certification: ISED Company Number: 8595A UPN: 1CGMSNNN HVIN (Hardware Version SARA—U201 PMN: (Product Marketing SARA—U201 Identification Number): Name) HMN: (Host Marketing Name) <HMN> FVIN: (Firmware Version <FVIN> Identification Number) TO WHOM IT MAY CONCERN Pursuant to Annex D in RSP—100 Issue 11 January 2016 and CFR § 15.212, we herewith declare for our module. locate, communicate, accelerate

Modular approval requirement Yes No * (a) The radio elements must have the radio frequency circuitry shielded. Physical/discrete and tuning capacitors may be located external to the shield, but Yes must be on the module assembly. *Please provide a detailed explanation if the answer is "No.": (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in Yes the applicable RSS / part 15 under conditions of excessive data rates or over— modulation. *Please provide a detailed explanation if the answer is "No.": (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the Yes applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. *Please provide a detailed explanation if the answer is "No.": (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall Yes contain a detailed description of the configuration of highest antenna gain for each type of antenna. *Please provide a detailed explanation if the answer is "No.": (e) The module shall be tested for compliance with the applicable standard in a stand—alone configuration, i.e. the module must not be inside another device Yes during testing. *Please provide a detailed explanation if the answer is "No.": (f) The module shall comply with applicable RSS—102 exposure requirements and any applicable FCC RF exposure requirement which are based on the intended Yes configuration/integration in a host. *Please provide a detailed explanation if the answer is "No.": Only applicable for FCC certification: Yes (g) The module must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. *Please provide a detailed explanation if the answer is "No.": (h) The modular transmitter complies with all applicable FCC rules. Instructions for Yes maintaining compliance are given in the user instructions. f / //

If you have any questions, please feel free to contact us at the address shown below Best Regards, Giuito Gomar L(,-bg%G > Zlircherstrasse 68, 8800 Thalwil, Switzerland +39 040 252 94 00 INFO for applicant: LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product, into which the module will be installed, will be maintained, such that full compliance of the end product is always ensured.


Document Created: 2019-10-13 11:31:22
Document Modified: 2019-10-13 11:31:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC