mpe report usa

FCC ID: XPY1CGM5NNN

RF Exposure Info

Download: PDF
FCCID_3096208

TEST REPORT No.: 16-1-0111601T02a-C1 According to: FCC Regulations Part 1.1310 , Part 2.1091 for u-Blox AG GSM/W-CDMA Module SARA-U201 FCC-ID: XPY1CGM5NNN Laboratory Accreditation and Listings Voluntary Controls for Industry Canada Electromagnetic Emissions Reg. No.: 3462D-1 Reg. No.: MRA US-EU 0003 Reg. No.: 3462D-2 R-2666 C-2914, Reg. No.: 3462D-3 T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 21 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report 16-1-0111601T02a-C1, Page 2 of 21 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. TX mode, tests overview FCC Part 2.1091 ..................................................................................................... 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 4 2.1. Identification of the testing laboratory ............................................................................................................. 4 2.2. Test location .................................................................................................................................................... 4 2.3. Organizational items ........................................................................................................................................ 4 2.4. Applicant’s details ........................................................................................................................................... 4 2.5. Manufacturer’s details ..................................................................................................................................... 4 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 5 3.1. TECHNICAL GSM DATA OF MAIN EUT DECLARED BY APPLICANT ............................................... 5 3.2. TECHNICAL W-CDMA DATA OF MAIN EUT DECLARED BY APPLICANT ....................................... 6 3.3. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 7 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 7 3.5. EUT set-ups ..................................................................................................................................................... 7 3.6. Configuration of cables used for testing ...................................................................................................... 7 3.7. EUT operating modes ...................................................................................................................................... 8 4. MEASUREMENTS ............................................................................................................................................. 9 4.1. Radio Frequency Exposure Evaluation §2.1091 .............................................................................................. 9 4.2. Results for fixed and mobile operations .......................................................................................................... 11 4.3. Conclusion for maximum admissible antenna gain (FCC Part 1.1310) ........................................................... 15 4.4. Measurement uncertainties .............................................................................................................................. 16 5. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 17 6. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 17 7. INSTRUMENTS AND ANCILLARY ................................................................................................................ 18 7.1. Used equiment “CTC” ..................................................................................................................................... 18 Table of annex Total pages Annex 2: External photographs of EUT 8 Annex 3: Internal photographs of EUT to be provided by applicant Annex 4: Test set-up photographs 9 The listed attachments are an integral part of this report. CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 3 of 21 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. The Equipment Under Test (in this report, hereinafter referred as EUT) supports radiofrequency cellular technologies. Following testcase have been considered to show compliance with applicable FCC Part 2.1091 and FCC Part 1.1310 of the FCC CFR 47 Rules.. 1.1. TX mode, tests overview FCC Part 2.1091 No. of References & Limits Test EUT EUT op- Diagram Port Result Cases FCC Standard Test limits set-up mode group Antenna passed -- RF Power §2.1046 N/A 1 1 to 6 (conducted) terminal Remark 1 (conducted) §2.1046 < 7 Watt ERP §22.913(a)(2) -- RF Power Cabinet §24.232(c) < 2Watt (EIRP) 2 1 to 6 Remark 1 (radiated) §27.50( c)(10) < 3 Watt (ERP) < 1 Watt §27.50(d) (EIRP) Radio FCC: §1.1310 frequency §1.1310 Table 1, Limits Passed, -- Exposure Cabinet 2 1 to 6 §2.1091 for General Remark 2 Evaluation Population (MPE) Remark: 1.) See separate test reports for GSM no. TR16-1-0019501T07a and W-CDMA no. TR16-1-0019501T05a 2.) Calculations based on Tune-Up Info delivered by applicant Test report no 16-1-0111601T02a-C1 dated 2016-08-12 replaces test report no. 16-1-0111601T02a from 2016-07-06. Replaced test report gets invalid therefore. Digitally signed by christian. lorenz@cetecom.com DN: cn=christian. lorenz@cetecom.com Date: 2016.08.12 10:29:01 +02'00' ...................................................... .................................................... Dipl.-Ing. C. Lorenz M. Nunier Responsible for test section Responsible for test report CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 4 of 21 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. Rachid Acharkaoui Deputy: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report and project leader: M. Nunier Receipt of EUT: 2016-06-06 Date(s) of test: 2016-06-07 to 2016-06-20 Date of report: 2016-08-12 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 Remark 1: based on applicants tune-up info 2.4. Applicant’s details Applicant’s name: u-Blox AG Address: Zürcherstr. 68 8800 Thalwil Switzerland Contact person: Mr. Marco Barchitta 2.5. Manufacturer’s details Manufacturer’s name: please see Applicant's details Address: please see Applicant's details CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 5 of 21 3. Equipment under test (EUT) 3.1. TECHNICAL GSM DATA OF MAIN EUT DECLARED BY APPLICANT GSM Frequency range  GSM 850: 824 – 849 MHz (Uplink), 869-894 MHz (Downlink) (US/Canada -bands)  GSM1900: 1850-1910 MHz (Uplink), 1930-1990 MHz (Downlink) Type of modulation  GSM,GPRS: GMSK  EGPRS-Mode: 8-PSK Number of channels  GSM 850: 128 – 251, 125 channels (USA/Canada -bands)  GSM1900: 512 – 810, 300 channels Test Channel frequencies  GSM/E-GPRS 850 MHz Band: Channel 128/192/251  GSM/E-GPRS 1900 MHz Band: Channel 512/661/810 Emission designator(s) 245KGXW (GSM850) 250KGXW (EDGE850) 245KG7W (GSM1900) 253KG7W (EDGE 1900) Antenna Type  External, separate RF-connector  Value from Data sheet GSA.8827.A.101111 Phoenix for 1m cable length Antenna Gain Tx (main) 850MHz Band: -0.44dBd (1.71 dBi) 1900MHz Band: 2.32dBi Antenna Gain Dx (diversity)  Not applicable Measured Output Power [dBm]: Conducted GSM 850 32.6 Conducted EDGE850 30.0 Calculated Output Power [dBm]:: Calculated with antenna details for 1m cable length: Radiated GSM 850 32.6 – 0.44dBd = 32.16 dBm ERP Radiated EDGE 850 30.0 - 0.44dBd = 29.56 dBm ERP Measured Output Power [dBm]:: Conducted GSM 1900 29.8 Conducted EDGE 1900 26.2 Measured Output Power [dBm]:: Radiated GSM 1900 29.8 dBm + 2.32dBi = 32.12 dBm EIRP Radiated EDGE1900 26.2 dBm + 2.32dBi = 25.52 dBm EIRP Installed options Power supply  for board over AC/DC adapter (AE2): 120V/60 Hz  DC power only: VNOM=3.8 Volt, Range: VMIN = 3.3V, VMAX = 4.4V Special EMI components -- Does EUT contain devices  yes susceptible to magnetic fields, e.g.  no Hall elements, electrodynamics microphones, etc.? EUT sample type  Production  Pre-Production  Engineering FCC label attached  yes  no CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 6 of 21 3.2. TECHNICAL W-CDMA DATA OF MAIN EUT DECLARED BY APPLICANT TX-frequency range  FDD Band 2: 1852.4–1907.6 MHz (Uplink), 1930-1990 MHz (Downlink)  FDD Band 4: 1712.4–1752.6 MHz (Uplink), 2110-2155 MHz (Downlink)  FDD Band 5: 826.4-846.6 MHz (Uplink), 869-894 MHz (Downlink) Type of modulation  FDD-Mode Release99: QPSK  FDD Mode Release 7: 16QAM additional Number of channels  FDD Band 2: UARFCN range 9262 – 9400 – 9538  FDD Band 4: UARFCN range 1312 – 1450 – 1513 FDD Band 5: UARFCN range 4132 – 4183 – 4233 UMTS-HSPA connectivity  Uplink speed: 5.76 Mb/s Test Channel frequencies Channel 9262, 9400, 9538 Channel 4132, 4185, 4233 Emission designator(s) FDD Mode: 4M07F9W Antenna Type  Integrated (enclosure)  External - dedicated, no RF- connector  External, separate RF-connector  Value from Data sheet GSA.8827.A.101111 Phoenix for 1m cable length Antenna Gain Tx (main) 850MHz Band: -0.44dBd (1.71 dBi) 1900MHz Band: 2.32dBi Antenna Gain Dx (diversity)  Not applicable MAX Output Power: Calculated with antenna details for 1m cable length: Radiated FDD-Mode 2 24.14 (AV) + 2.32dBi (1m cable) = 26.46 dBm EIRP FDD-Mode 5 23.59 (AV) - 0.44dBd (1m cable) = 23.15 dBm ERP MAX Output Power: Conducted FDD-Mode 2 24.14 (AV) FDD-Mode 5 23.59 (AV) Installed option  GSM 900 and GSM 1800 Bands (not usable in USA/Canada)  W-CDMA Band I and Band VIII (not usable in USA/Canada) Power supply  Board (AE1):over AC/DC adapter: 120V/60 Hz  DC power only: VNOM=3.8 Volt, Range: VMIN = 3.3V, VMAX = 4.4V Special EMI components -- Does EUT contain devices  yes susceptible to magnetic fields, e.g.  no Hall elements, electrodynamics microphones, etc.? EUT sample type  Production  Pre-Production  Engineering FCC label attached  yes  no CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 7 of 21 3.3. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware status software status tion*) IMEI: GSM/W-CDMA EUT A SARA-U201 357520070020 261A01 23.56 Module 959 IMEI: EUT B GSM/W-CDMA SARA-U201 357520070020 261A01 23.56 918 *) EUT short description is used to simplify the identification of the EUT in this test report. 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) AE 1 AC/DC power adapter UUX-324-1215 F04-0026561 - - AE 2 Evaluation Test Board EVB-WL3 BS090514 - - AE 3 Headset HDC-5 - - - Taoglas GSATT150500 AE 4 Cellular antenna GSA.8827.A.101111 - - 1611 phoenix AE 5 USB cable Mini-USB to USB A -- 1.5m -- Dell Latitude Win 7 + Putty AE 6 D2120 “ctc062011” -- Notebook program *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 3.5. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) EUT A + AE 1 + AE 2+ AE 3+ AE 4 + AE set. 1 AE 6 used temporary for AT commands 5 + AE 6 *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. 3.6. Configuration of cables used for testing Cable S/N HW Cable length number Item Type serial number hardware status Cable 1 USB cable Mini-USB to USB A -- 1.5m -- CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 8 of 21 3.7. EUT operating modes EUT Description of operating Additional information operating modes mode no.*) GPRS 850 A communication link is established between the mobile station and the test op. 1 TCH mode simulator. The transmitter is operated at its maximum rated output TCH=128/192/251 power: 33 dBm (power class 4; power control level 5). USF_Duty CYCLE set to 100%, coding scheme CS-1 for GMSK modulation, slot 3 active, uplink gamma: 3 (33dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link. E-GPRS 850 A communication link is established between the mobile station and the test op. 2 TCH mode simulator. The transmitter is operated at its maximum rated output TCH=128/192/251 power: 33 dBm (power class 4; power control level 5). USF_Duty CYCLE set to 100%, coding scheme MCS-5 for 8PSK modulation, slot 3 active, uplink gamma: 6 (27dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link. GPRS 1900 A communication link is established between the mobile station and the test op. 3 TCH mode simulator. The transmitter is operated at its maximum rated output TCH=512/661/810 power: 30 dBm (power class 1; power control level 0). USF_Duty CYCLE set to 100%, coding scheme CS-1 for GMSK modulation, slot 3 active, uplink gamma: 3 (30dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link E-GPRS 1900 A communication link is established between the mobile station and the op. 4 TCH mode test simulator. The transmitter is operated at its maximum rated PCL=0 (max. output power: 26 dBm (power class 1; power control level 0). power) USF_Duty CYCLE set to 100%, coding scheme MCS-5 for 8-PSK TCH=512/661/810 modulation, slot 3 active, uplink gamma: 5 (26dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link FDD Mode 2 A communication link is established between the mobile station (UE) op. 5 and the test simulator. The transmitter is operated on its maximum rated output RMC99-Mode power class: 24dBm. The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link according Table E5.1/Table FDD Mode 5 op. 6 E5.1A as described in 3GPP TS34.121, Annex E. Chosen settings: 12.2kbps RMC + HSPA 34.108 RMC99-Mode This setting was chosen for all Release 6 mobile equipment. *) EUT operating mode no. is used to simplify the test report. CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 9 of 21 4. Measurements 4.1. Radio Frequency Exposure Evaluation §2.1091 4.1.1. Test location and equipment (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 For Evaluation instruments are not needed. Results are determined by calculation based on applicants delivered Tune-Up procedure. 4.1.2. Requirements The criteria used for the evaluation of human exposure to radio frequency radiation is table 1 according FCC §1.1310 and table chapter 4.2 of RSS-102 standard and it is subject for evaluation of the RF exposure prior to FCC: §1.1310 equipment authorization. As the mobile equipment is authorized under Part 22 (Subpart H) and Part 24 of the FCC Rules, it is subject for evaluation of the RF exposure prior to equipment authorization. Further information on evaluating compliance with these limits can be found in the FCC’s OST/OET Bulletin Number 65, ‘‘Evaluating Compliance with FCC-Specified Guidelines for Human Exposure to Radiofrequency Radiation.’’ For purposes of these requirements mobile devices are defined by the FCC as transmitters designed to be used FCC § 2.1091 in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between radiating structures and the body of the user or nearby persons. These devices are normally evaluated for exposure potential with relation to the MPE limits given in Table 1 of Appendix A. 4.1.2.1. Valid for FCC Table 1: LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time [MHz) [V/m] [A/m] [mW/cm²] [minutes] 30 - 300 61.4 0.163 1.0 6 300 - 1500 - f/300 6 1500 - 100,000 - 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3 – 1.34 614 1.63 *(100) 30 1.34 – 30 824/f 2.19/f *(180/f²) 30 30 - 300 27.5 0.073 0.2 30 300 - 1500 - - f/1500 30 1500 – 100,0 - - 1.0 30 For given Power density limit at a single frequency (accord. Table 1 Limits) the maximum antenna gain can be calculated. The used equation to predict the power density in the far-field of one single radiating antenna can be made by following equation: EIRP P  G S  4R 2 4R 2 S  4R 2 GNUMERIC  P CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 10 of 21 4.1.3. General Limits: Cellular Radiotelephone Service (subpart H of part 22) FCC: §1.1307 Non-building-mounted antennas: height above ground level to lowest point of antenna < 10 m and total power of all channels > 1000 W ERP (1640 W EIRP) Personal Communications Services (part 24) FCC §1.1307 Broadband PCS (subpart E): non-building-mounted antennas: height above ground level to lowest point of antenna < 10 m and total power of all channels > 2000 W ERP (3280 W EIRP) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Table 1(B) Limits for General Population/Uncontrolled Exposure FCC §1.1310 300–1500 MHz: f/1500 mW/cm² 1500–100,000 MHz: 1.0 mW/cm² Subject to routine evaluation is required when the device operate at frequencies of 1.5 GHz or below and their FCC §2.1091 effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. (a) Base stations are limited to 1640 watts peak equivalent isotropically radiated power (e.i.r.p.) with an antenna FCC §24.232 height up to 300 meters HAAT. b) Mobile/portable stations are limited to 2 watts e.i.r.p. peak power, … (a) Maximum ERP. The effective radiated power (ERP) of base transmitters and cellular repeaters must not exceed FCC §22.913 500 Watts. The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts. FCC §27.50 (10) Portable stations (hand-held devices) are limited to 3 watts ERP; and (C )(10) (4) Fixed, mobile, and portable (hand-held) stations operating in the 1710-1755 MHz band are limited to 1 watt FCC §27.50(d) EIRP. KDBs No. 447498 D01 v06 4.1.4. Evaluation Method Valid for GSM/GPRS/EDGE mode: • The power was considered on 3 frequencies (lowest/middle/highest) within each operable bands and the results compared to applicant’s declared power values (tune-up info). • Average burst power (slot power) was considered (see separate report for GSM/GPRS/E-GPRS technology) • Only one uplink slot (1 TX) was measured. 4 TX slots are maximum possible for this device and calculated as worst- case • A duty-cycle correction factor of 10*log10 (max. number of possible active slots / 8 slots) were applied. Here class 12 equipment is defined Please find in the following tables the calculations based on applicants tune-up information for the power values. Also the maximum admissible allowed antenna gain is calculated which is not exceeding the MPE limit for fixed and mobile operations. Valid for W-CDMA/LTE Mode: • The power was considered on 3 frequencies (lowest/middle/highest) within each operable FDD-band (see separate report for W-CDMA technology) and the results compared to applicant’s declared power values (tune-up info). A RMS detector was used. • No duty-cycle correction factor is applicable Please find in the following tables the calculations based on applicants tune-up information UBX-16012299, Vers. Rev2.0, dated 2016-07-05 CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 11 of 21 4.2. Results for fixed and mobile operations 4.2.1. Results for lower operational band: GSM850 and FDD Band 5 4.2.1.1. MPE results Distance 20 cm Operating Frequency on Declared Max. positive Antenna Ext. Path Loss to Calculated Duty Declared Equivalent EIRP MPE Lim it MPE-Value Margin to Fraction for Co- Max. Fraction- Mode channel m axim um tolerance Gain antenna m axim um cycle Maxim um (m axim um EIRP accord. lim it: Location Value w ithin conducted according (external cables) EIRP EIRP x duty cycle) Table 1 calculations Frequency- output m anufacturer (declared+ Band pow er Tune-up+ (dB) antenna (m W) Gain) (MHz) (dBm ) (dB) (dBi) (dBm ) % (W) (m W/cm ^2) (m W/cm ^2) (m W/cm ^2) 824,2 32,5 1 0 0 33,5 2,23872 1119,36 0,54947 0,222690 0,326777 0,405283 GSM/GPRS 837 32,5 1 0 0 33,5 50% 2,23872 1119,36 0,55800 0,222690 0,335310 0,399086 0,4053 (PK) 848,8 32,5 1 0 0 33,5 2,23872 1119,36 0,56587 0,222690 0,343177 0,393537 824,2 27,0 2 0 0 29,0 0,79433 397,16 0,54947 0,079013 0,470453 0,143800 EDGE 837 27,0 2 0 0 29,0 50% 0,79433 397,16 0,55800 0,079013 0,478987 0,141601 0,1438 (PK) 848,8 27,0 2 0 0 29,0 0,79433 397,16 0,56587 0,079013 0,486853 0,139632 WCDMA 826,4 23,0 2 0 0 25,0 0,31623 316,23 0,55093 0,062912 0,488022 0,114191 FDD Band 5 836,4 23,0 2 0 0 25,0 100% 0,31623 316,23 0,55760 0,062912 0,494688 0,112826 0,1142 (RMS-Value) 846,6 23,0 2 0 0 25,0 0,31623 316,23 0,56440 0,062912 0,501488 0,111466 Maxim um calculated MPE value: Low est MPE-Lim it in 0,5495 [m W/cm ^2] Frequency-Band: Highest MPE value in 0,2227 [m W/cm ^2] frequency-band: Low est m argin to lim it 0,3268 [m W/cm ^2] in frequency band: Maximum antenna gain considerations for fixed/mobile operations for complying with limits: Maximum pow er input to the antenna incl. Duty cycle [mW]: P 1119 (Avg. Burst Pow er or RMS) R Distance [cm]: 20 MPE limit acc. §1.1310 for uncontrolled exposure [mW/cm²]: S 0,55 (FCC use mW/cm²) G1 Maximum Antenna gain to comply w ith MPE limit [dBi]: 3,92 (For G1 the low est measured channel to reach minimum ant. Gain selected) ERP pow er limit according to §2.1091 [W]: 1,50 (Avg. Burst Pow er or RMS) G2 Max. Antenna gain to comply w ith limit incl. Duty cycle [dBi]: 3,42 (For G2 select the max. Avg. Burst Pow er or RMS value incl. Duty cycle) ERP pow er limit according to §22.913 [W ERP]: 7,00 G3 Max. Antenna gain to comply w ith limit [dBi]: 7,10 (For G3 select the max. Average burst pow er value excluding Duty cycle) G850 MHz band Min (G1, G2, G3) [dBi] 3,42 Sum m arized results: The max. ant. gain for mobile operation at 700/850MHz band to comply with MPE and EIRP limits incl. path loss shall not exceed (dBi): 3,42 dBi or 1,27 dBd Remark: worst-case imposed by ERP limit accord. §2.1091 CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 12 of 21 4.2.2. Results for upper operational band: FDD 2 and GSM1900 4.2.2.1. MPE results Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Ext. Path Loss Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Fraction for Max. Fraction- on channel m axim um tolerance to antenna m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 Co-Location Value w ithin conducted according (external (Measured+ EIRP x duty cycle) calculations Frequency- output pow er m anfacturer cables) Tune-up+ Band Antenna Gain) (dB) (dBi) (dB) (MHz) (dBm ) (dBm ) % (W) (m W) (m W/cm ^2) (m W/cm ^2) (W/m ^2) 1850,2 30,5 1,00 0,0 0,0 31,5 1,413 706 1,0000 0,1405 0,8595 0,140508 GSM/GPRS 1880,0 30,5 1,00 0,0 0,0 31,5 50% 1,413 706 1,0000 0,1405 0,8595 0,140508 0,1405077 (AV Burst Pow er) 1909,8 30,5 1,00 0,0 0,0 31,5 1,413 706 1,0000 0,1405 0,8595 0,140508 1850,2 26,0 2,00 0,0 0,0 28,0 0,631 315 1,0000 0,0628 0,9372 0,062762 EDGE 1880,0 26,0 2,00 0,0 0,0 28,0 50% 0,631 315 1,0000 0,0628 0,9372 0,062762 0,0627625 (AV Burst Pow er) 1909,8 26,0 2,00 0,0 0,0 28,0 0,631 315 1,0000 0,0628 0,9372 0,062762 W-CDMA 1852,4 23,0 2,00 0,0 0,0 25,0 0,316 316 1,0000 0,0629 0,9371 0,062912 FDD Band 2 (RMS- 1880,0 23,0 2,00 0,0 0,0 25,0 100% 0,316 316 1,0000 0,0629 0,9371 0,062912 0,0629115 Value) 1907,6 23,0 2,00 0,0 0,0 25,0 0,316 316 1,0000 0,0629 0,9371 0,062912 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,1405 [m W/cm ^2] frequency-band: Margin to lim it in 0,8595 [m W/cm ^2] frequency-band: Maxim um antenna gain considerations for fixed/m obile operations for com plying w ith lim its: Maximum pow er input to the antenna incl. Duty cycle (mW): P 706 (Avg. Burst Pow er or RMS) R Distance (cm): 20 MPE limit acc. §1.1310 for uncontrolled exposure (mW/cm²): S 1,00 (FCC use mW/cm²) G1 Maximum Antenna gain to comply w ith MPE limit (dBi): 8,52 (For G1 the low est measured channel to reach minimum ant. Gain selected) ERP pow er limit according to §2.1091 [W]: (Avg. Burst Pow er or RMS) 3,00 8,43 G2 Max. Antenna gain to comply w ith this limit incl. Duty cycle (dBi): (For G2 select the max. Avg. Burst Pow er or RMS value incl. Duty cycle) EIRP pow er limit according to §24.232 [W]: 2,00 G3 Max. Antenna gain to comply w ith this limit (dBi): 1,51 (For G3 select the max. Average burst pow er value excluding Duty cycle) Min (G1, G2, G3) (dBi) 1,51 Sum m arized The max. ant. gain for mobile operation at 1900 MHz band to comply with MPE and EIRP limits incl. path loss shall not exceed (dBi): 1,51 results: Remark: worst-case imposed by EIRP limit accord. §24.232 CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 13 of 21 4.2.3. Co-location assessment ( scenario) Following table shows calculations with Wireless LAN technology active in the device. Also it shows the MPE calculations on a scenario when additional to the cellular transmitter a non-licensed modular transmitter is active at same time. Special limitations such as interractions between the transmitting RF-antennas due small physical distance betweeen them, are not sufficient modeled by the far field formula for power density. For such cases a non-linear program electromagnetic software or MPE measurements should be performed. 4.2.3.1. Co-location assessment with wireless transmitters in 2.4GHz band Distance 20 cm Operation Mode Frequency Maxim um Antenna Gain Declared Duty cycle Declared Equivalent MPE Lim it MPE-Value Margin to Fraction for Max. on channel allow ed EIRP m axim um EIRP Maxim um conducted output accord. Lim it: (Measured+ conducted pow er (output Table 1 Co-Location Fraction- Tune-up) output pow er x duty calculations Value pow er cycle) within (MHz) (dBm ) (dBi) (dBm ) Frequency- % (W) (m W) (m W/cm ^2) (m W/cm ^2) Band (m W/cm ^2) 2402,0 9,5 4,0 13,5 0,022 22,4 1,000000 0,004454 0,995546 0,004454 Bluetooth 2440,0 9,5 4,0 13,5 100% 0,022 22,4 1,000000 0,004454 0,995546 0,004454 0,004454 2.4GHz 2480,0 9,5 4,0 13,5 0,022 22,4 1,000000 0,004454 0,995546 0,004454 2412,0 19,0 4,0 23,0 0,200 199,5 1,000000 0,039694 0,960306 0,039694 W-LAN 2437,0 19,0 4,0 23,0 100% 0,200 199,5 1,000000 0,039694 0,960306 0,039694 0,039694 2.4GHz 2462,0 19,0 4,0 23,0 0,200 199,5 1,000000 0,039694 0,960306 0,039694 4.2.3.2. Co-location assessment with wireless transmitters in 5GHz band Operation Frequency on Measured Declared EIRP Duty cycle Maxim um Equivalent MPE-Value MPE-Value Margin Mode channel m axim um Antenna Gain EIRP EIRP Maximum conducted (EIRP x duty Fraction output pow er cycle) Fraction for Value Co-location within calculations Frequency (MHz) (dBm ) (dBi) (dBm ) (%) (W) (m W) (m W/cm ^2) (m W/cm ^2) (m W/cm ^2) band 5180,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5200,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (20MHZ BW) 5240,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 5260,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5280,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (20MHZ BW) 5320,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 5500,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5580,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (20MHZ BW) 5700,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 5745,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5785,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (20MHZ BW) 5825,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5190,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (40MHz BW) 5230,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5270,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (40MHz BW) 5310,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 5510,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5550,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (40MHz BW) 5670,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 W-LAN 5GHz 5755,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 0,039694 (40MHz BW) 5795,0 19,00 4,00 23,00 100% 0,200 199,53 1,0000 0,039694 0,960306 0,039694 Maximum calculated MPE value: 5GHz Low est MPE- 1,0000 [W/m ^2] Lim it: Highest MPE- 0,0397 [W/m ^2] value: Margin to 0,9603 [W/m ^2] lim it CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 14 of 21 4.2.3.3. Co-location wireless with cellular criteria check According KDB447498 D01 v06 simultanuos transmission MPE test exclusion applies, when the sum of ratio MPE- Value/MPE-Limit for all active transmitters is equal/less 1. ( <=1). GSM/G-PRS/ GSM/GPRS/ W-CDMA W-CDMA E-GPRS E-GPRS Band 5 Band 2 Band-850 Band 1900 Ratio of MPE- 0,890435868 0,250885143 0,198929939 0,089069732 Value/Limit W-LAN 0,039694483 0,930130351 0,290579625 0,238624421 0,128764214 2.4GHz Bluetooth 0,004453794 0,894889663 0,255338937 0,203383733 0,093523526 2.4GHz W-LAN 0,039694483 0,930130351 0,290579625 0,238624421 0,128764214 5GHz Maximum-Value 0,930130351 Remark: maximum allowed antenna gain for cellular considered for generating this table as shown in chapter 4.2.1 and 4.2.2 CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 15 of 21 4.3. Conclusion for maximum admissible antenna gain (FCC Part 1.1310) With Co-location Without -- W-LAN W-LAN Co-location Bluetooth® 2.4GHz 5GHz Max. Gain in Lower operational band f < 1GHz (GSM850, FDD Band 5 3.42 3.42 3.42 3.42 [dBi] Max. Gain in Higher operational band (1900MHz) 1.51 1.51 1.51 1.51 (GSM1900, FDD Band 2) [dBi] Remark: 1.) GSM850 Band: §2.1091 limits the maximum allowed antenna gain 2.) GSM1900: EIRP accord. §24.232 limits the maximum allowed antenna gain 3.) For all calculations a distance of 20cm to human body is considered (fixed/mobile equipment). For portable equipment other regulations and measurements apply 4.) W-LAN more critical regarding MPE-limits then Bluetooth® CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 16 of 21 4.4. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based on a RF-Measurement Reference Frequency range Remarks confidence level of 95% Conducted emissions 9 kHz - 150 kHz 4.0 dB CISPR 16-2-1 - (U CISPR) 150 kHz - 30 MHz 3.6 dB Radiated emissions 30 MHz - 1 GHz 4.2 dB CISPR 16-2-3 E-Field Enclosure 1 GHz - 18 GHz 5.1 dB Disturbance power CISPR 16-2-2 30 MHz - 300 MHz - - Substitution Power Output radiated - 30 MHz - 4 GHz 3.17 dB method Cel- Cel- Set-up No. BT1 W1 W2 C1 C2 Power Output conducted - 9 kHz - 12.75 GHz N/A 0.60 -- -- -- - 12.75 - 26.5GHz N/A 0.82 -- -- -- Conducted emissions - 9 kHz - 2.8 GHz 0.70 N/A -- -- -- N/A - not on RF-port 2.8 GHz - 12.75GHz 1.48 N/A -- -- -- applicable 12.75 GHz - 18GHz 1.81 N/A -- -- -- 18 GHz - 26.5GHz 1.83 N/A -- -- -- 0.1272 ppm (Delta Marker) Frequency Occupied bandwidth - 9 kHz - 4 GHz error 1.0 dB Power - 0.1272 ppm (Delta Marker) Frequency Emission bandwidth 9 kHz - 4 GHz error - See above: 0.70 dB Power Frequency stability - 9 kHz - 20 GHz 0.0636 ppm - 150 kHz - 30 MHz 5.0 dB Magnetic Radiated emissions 30 MHz - 1 GHz 4.2 dB field - Enclosure 1 GHz - 20 GHz 3.17 dB E-field Substitution Table: measurement uncertainties, valid for conducted/radiated measurements CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 17 of 21 5. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropically radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Dokuments from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power 6. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) FCC, Federal Communications 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) MRA US-EU Commission 558 Radiated Measurements above 1 GHz, 3 m (FAR) 0003 Laboratory Division, USA 348 Mains Ports Conducted Interference Measurements 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) IC, Industry Canada Certification 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) and Engineering Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 18 of 21 7. Instruments and Ancillary 7.1. Used equiment “CTC” The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 7.1.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 053 Audio Analyzer UPA3 860612/022 Firm. V 4.3 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 140 Signal Generator SMHU 831314/006 Firm.= 3.21 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 355 Power Meter URV 5 891310/027 Firm.= 1.31 365 10V Insertion Unit 50 Ohm URV5-Z2 100880 Eprom Data = 31.03.08 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 9.15.00 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 9.15.00 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Firmware Bios 3.40 , Analyzer 3.40 Sp 2 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 670 Univ. Radio Communication Tester CMU 200 106833 µP1 =V8.50, Firmware = V.20 689 Vector Signal Generator SMU200 100970 02.20.360.142 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) 7.1.2. Single instruments and test systems CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 19 of 21 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 30.05.2017 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 30.05.2017 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 30.05.2017 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 30.04.2017 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 30.05.2019 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO 36/12 M - 31.03.2017 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 30.04.2018 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 30.04.2018 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 30.04.2017 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 WRCT 1900/2200-5/40- 066 notch filter (WCDMA; FDD1) 5 Wainwright GmbH 12 M 1g 30.06.2016 10EEK 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 30.04.2018 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 30.04.2018 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 30.05.2019 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 30.04.2018 140 Signal Generator SMHU 831314/006 Rohde & Schwarz 24 M - 30.05.2018 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 30.05.2018 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 30.05.2018 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 30.05.2019 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 30.05.2018 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 30.05.2018 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 287 pre-amplifier 25MHz - 4GHz AMF-2D-100M4G-35-10P 379418 Miteq 12 M 1c 30.06.2017 291 high pass filter GSM 850/900 WHJ 2200-4EE 14 Wainwright GmbH 12 M 1c 30.06.2017 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 30.05.2017 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 31.03.2017 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 31.03.2017 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 Heraeus Vötsch Pre-m 2 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 30.05.2018 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 30.04.2017 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 355 Power Meter URV 5 891310/027 Rohde & Schwarz 24 M - 30.05.2018 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 30.04.2017 371 Bluetooth Tester CBT32 100153 R&S 36 M - 30.05.2019 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 12 M - 30.05.2017 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 30.05.2017 389 Digital Multimeter Keithley 2000 0583926 Keithley 24 M - 30.04.2017 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 30.05.2017 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 30.04.2017 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 31.03.2017 System CTC-FAR-EMI- ETS-Lindgren / 443 CTC-FAR-EMI-RSE - 12 M 5 30.06.2017 RSE CETECOM WRCT 1850.0/2170.0- Wainwright Instruments 448 notch filter WCDMA_FDD II 5 12 M 1c 30.06.2017 5/40- GmbH WRCT 824.0/894.0-5/40- 449 notch filter WCDMA FDD V 1 Wainwright 12 M 1c 30.06.2017 8SSK 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 20 of 21 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 30.04.2017 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 30.05.2018 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 30.04.2018 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 30.04.2018 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 30.04.2017 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d AMF-5D-02501800-25- 484 pre-amplifier 2,5 - 18 GHz 1244554 Miteq 12 M - 30.06.2017 10P System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 31.07.2017 NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 30.05.2017 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 WRCA 800/960-02/40- 512 notch filter GSM 850 SN 24 Wainwrght 12 M 1c 30.06.2017 6EEK 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 30.04.2017 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 30.05.2017 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 30.04.2017 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36/12 M - 31.07.2018 System CTC S-VSWR Verification SAR- System EMI Field SAR S- ETS 550 - 24 M - 31.07.2017 EMI VSWR Lindgren/CETECOM 552 high pass filter 2,8-18GHz WHKX 2.8/18G-10SS 4 Wainwright 12 M 1c 30.06.2017 557 System CTC-OTA-2 R&S TS8991 - Rohde & Schwarz 12 M 5 30.09.2016 System CTC FAR S- 558 System CTC FAR S-VSWR - CTC 24 M - 19.04.2017 VSWR 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2019 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 594 Wideband Radio Communication Tester CMW 500 101757 Rohde & Schwarz 12 M - 30.04.2017 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz pre-m - 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Rohde & Schwarz 24 M - 30.04.2017 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 30.04.2017 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 30.04.2017 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 30.05.2018 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 30.05.2017 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 24 M - 30.04.2017 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 24 M - 30.05.2018 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 30.05.2017 Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 30.04.2017 Solutions 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 30.05.2017 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 690 Spectrum Analyzer FSU 100302/026 Rohde&Schwarz 12 M - 30.05.2017 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 36 M - 31.03.2017 697 Power Splitter ZN4PD-642W-S+ 165001445 Mini-Circuits - 2 CETECOM_TR16_1_0111601T02a-C1

Test Report 16-1-0111601T02a-C1, Page 21 of 21 7.1.3. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 8. Test report version Version Applied changes Date of release -- Initial release 2016-07-06 C1 Correction on units on page 11 2016-08-12 CETECOM_TR16_1_0111601T02a-C1


Document Created: 2016-08-12 10:29:01
Document Modified: 2016-08-12 10:29:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC