test report_WCDMA

FCC ID: XPY1CGM5NNN

Test Report

Download: PDF
FCCID_3096205

TEST REPORT No.: TR16-1-0019501T05a According to: FCC Regulations Part 22, Part 24, Part 15C IC-Regulations RSS-132 Issue 3, RSS-133 Issue 6, RSS-Gen Issue 4 for u-Blox AG GSM/W-CDMA Module SARA-U201 FCC-ID: XPY1CGM5NNN IC: 8595A-1CGM5NNN PMN: SARA-U201 HVIN: SARA-U201 Laboratory Accreditation and Listings Voluntary Controls for Industry Canada Electromagnetic Emissions Reg. No.: 3462D-1 Reg. No.: MRA US-EU 0003 Reg. No.: 3462D-2 R-2666 C-2914, Reg. No.: 3462D-3 T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 33 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report TR16-1-0019501T05a, Page 2 of 33 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. Tests overview of US CFR Title 47 Part 22/24 and Canada IC (RSS) Standards ........................................... 3 1.2. RX mode, tests overview according FCC Part 15B and Canadian RSS Standards ......................................... 4 1.3. Attestation:....................................................................................................................................................... 4 2. ADMINISTRATIVE DATA ............................................................................................................................... 5 2.1. Identification of the testing laboratory ............................................................................................................. 5 2.2. Test location .................................................................................................................................................... 5 2.3. Organizational items ........................................................................................................................................ 5 2.4. Applicant’s details ........................................................................................................................................... 5 2.5. Manufacturer’s details ..................................................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 6 3.1. TECHNICAL DATA OF MAIN EUT DECLARED BY APPLICANT ......................................................... 6 3.2. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 7 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 7 3.4. EUT set-ups ..................................................................................................................................................... 7 3.5. EUT operating modes ...................................................................................................................................... 8 3.6. Configuration of cables used for testing .......................................................................................................... 8 4. DESCRIPTION OF TEST SYSTEM SET-UP’S .............................................................................................. 9 4.1. Test system set-up for conducted measurements at antenna port .................................................................... 9 4.2. Test system set-up for radiated spurious emission measurements ................................................................... 11 5. MEASUREMENTS ............................................................................................................................................. 12 5.1. RF-Parameter - RF Peak power output conducted and PAPR-Value .............................................................. 12 5.2. RF-Parameter - Occupied bandwidth and emission bandwidth ....................................................................... 14 5.3. RF-Parameter - Conducted out of Band RF emissions and Band Edge ................................................... 16 5.4. RF-Parameter - Radiated out of Band RF emissions and Band Edge ...................................................... 18 5.5. RF-Parameter - Frequency stability on temperature and voltage variations........................................... 21 5.6. General Limit - Radiated field strength emissions below 30 MHz .................................................................. 26 5.7. Measurement uncertainties .............................................................................................................................. 28 6. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 29 7. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 29 8. INSTRUMENTS AND ANCILLARY ................................................................................................................ 30 8.1. Used equiment “CTC” ..................................................................................................................................... 30 9. VERSIONS OF TEST REPORTS (CHANGE HISTORY) ............................................................................. 33 Table of annex Total pages Annex 1: Measurement diagrams 43 Annex 2: External photographs of EUT 8 Annex 3: Internal photographs of EUT TO BE PROVIDED BY APPLICANT Annex 4: Test set-up photographs 9 The listed attachments are an integral part of this report. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 3 of 33 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. Also we refer on special conditions which the applicant should fulfill according §2.927 to §2.948, special focus regarding modification of the equipment and availability of sample equipment for market surveilance tests. The Equipment Under Test (in this report, hereinafter referred as EUT) supports radiofrequency technologies. This test report shows results for GPRS and (E)GPRS technologies only. Other implemented wireless technologies were not considered within this test report. Following tests have been performed to show compliance with applicable FCC Part 2, Part 22, Subpart H, Part 24, Subpart E (Broadband PCS) and Part 15 Subpart C of the FCC CFR Title 47 Rules, Edition 4th November 2015 and Canada RSS-132 Issue 3, RSS-133 Issue 6 and RSS-Gen Issue 4 standards. 1.1. Tests overview of US CFR Title 47 Part 22/24 and Canada IC (RSS) Standards No. of References & Limits EUT EUT Diagram Test case Port op- Result set-up group FCC Standard RSS Section Test limit mode AC- §15.207 limits Power Lines AC- Emissions Power RSS-Gen, Issue Remark 1 lines §15.207 -- -- Conducted 4: Chapter 8.8 1.) (conducted) IC: Table 3 (0,15 - 30 MHz) General field RSS-Gen, 2400/F(kHz) µV/m strength Issue 4: 2 §15.209(a) 24000/F(kHz) µV/m 2 1+2 passed emissions Chapter 8.9, 30 µV/m (9 kHz - 30 MHz) Table 5+6 < 7 Watt (ERP) RSS-132, Issue 3: §2.1046 Chapter 5.4 Passed SRSP-503: 5.1.3 (calculated RF-Power < 2 Watt (EIRP) with antenna 7 Enclosure §22.913(a)(2) -- 1+2 (ERP/EIRP) gain and + RSS-133, Issue 6 conducted §24.232(c) Chapter 4.1/6.4 power values) Inter- connecting SRSP-510: 5.1.2 < 1 Watt (EIRP) cables (radiated) Spurious RSS-132: 8 1 1+2 passed emissions §2.1053(a) Chapter 5.5(i)(ii) Required attenuation §2.1057 below P(dBW): §22.917(a)(b) RSS-133: 43+10log(P) dBc Band-Edge §24.238(a)(b) Chapter 9 6.5.1(i)(ii) 1 1+2 passed compliance CETECOM_TR16_1_0019501T05a

CETECOM* Test Report TR16—1—0019501T05a, Page 4 of 33 No. of References & Limits EUT EUT Diagram Test case Port — —— seus op— Result group FCC Standard RSS Section Test limit P mode RSS—132: Chapter 5.4 , srsp—s03: 5.13 <7 Watt (ERP) 30 RF Power §2.1046 1 2 passed RSS—133: Chapter 4.1/6.4 «2 Wett (EIBP) SRSP—510: 5.1.2 26dB Emission ; §2.202 4\ — + §2.1049(h) RSS—Gen,, 2 1+2 passed 2 bandwidth 4 5 Issue 4: 99% Power 35 BotsOecupied bandwidth Anteisa rerminal §229170) §24.238(a) Chapter 6.6‘ 2 1+2 P passed Spurious y . 36 emissions feondusted) §21051 RSS—1 27. I§eue 2: Required attenuation 2 1+2 passed §2.1057 5.5((i) below PidBwy Band—Edge §22.917(a)(b) ° RSS—133, ie Issue 6: 43‘;‘1"& 0 ((P) dé‘c 37 compliance §24.238(a)(b) 6.5.10(i) E 2 1+2 Passed §2.1055(a)(2) RSS—132, Issue 3: FCCAC: §22.355 Chapter 5.3 <+2.5ppm Frequency FCC/IC:‘ fundamental + 28 stability table C1 |RSS—133, Issua 6: ombsionsstay within * ‘*2 passed §24.235 Chapter 6.3 the authorized bands IC: <+2.5ppm 1.2. RX mode, tests overview according FCC Part 15B and Canadian RSS Standards No. of References & Limits EUT EUT Diagram Test case Port scan op— Result group FCC Standard RSS Section Test limit °_|_mode AC—Power Lines . FCC . §15.107 Smd 1 AC—Power §15.107 RSS—Gen, Issue 8: ;}';s;;lll:::‘ss _ _ Faswed conducted lines §15.207 Chapter 8.8 * Emissions Remark 1 RSS—Gen: Table 3 RSS—132, FCC 15.109 Receiver Cobiers §15.109 Issue 3: 6.6 class B limits Poged 3 radiated Interconnecti ng cables §15.33 .15'35 Kss —Can Issue 4: 5.3 RSS—Gen: —« «— R k1 emissions 8 §15. RSS 133, Chapter 5.3+Chapter «e Issue 6: 6.6 712 Remark: 1.) See separate test report 16—1—0088301TO1a for measurements according Part 15, Subpart B. 1.3. Attestation: 1 declare thatall measurements wereperformed by me or under my supervision and that all measurements have been performed and are correct to my best knowledge and belief to Industry Canada standards. All requirements as shown in above table are met in accordance with enumerated standards. 2y o U im \ O\/\y tds at ;E"i [¥ #)u/? Coae Dipl.—Ing. Rachid Acharkaoui Dipl.—Ing. C. Lorenz Responsible for test section Responsible for test report CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 5 of 33 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. Rachid Acharkaoui Deputy: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report and project leader: Dipl.-Ing. C. Lorenz Receipt of EUT: 2016-06-06 Date(s) of test: 2016-06-07 to 2016-06-20 Date of report: 2016-06-28 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 2.4. Applicant’s details Applicant’s name: u-Blox AG Address: Zürcherstrasse 68 8800 Thalwil Schwitzerland Contact person: Mr. Marco Barchitta 2.5. Manufacturer’s details Manufacturer’s name: please see Applicant's details Address: please see Applicant's details CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 6 of 33 3. Equipment under test (EUT) 3.1. TECHNICAL DATA OF MAIN EUT DECLARED BY APPLICANT TX-frequency range  FDD Band 2: 1852.4–1907.6 MHz (Uplink), 1930-1990 MHz (Downlink)  FDD Band 4: 1712.4–1752.6 MHz (Uplink), 2110-2155 MHz (Downlink)  FDD Band 5: 826.4-846.6 MHz (Uplink), 869-894 MHz (Downlink) Type of modulation  FDD-Mode Release99: QPSK  FDD Mode Release 7: 16QAM additional Number of channels  FDD Band 2: UARFCN range 9262 – 9400 – 9538  FDD Band 4: UARFCN range 1312 – 1450 – 1513 FDD Band 5: UARFCN range 4132 – 4183 – 4233 UMTS-HSPA connectivity  Uplink speed: 5.76 Mb/s Test Channel frequencies Channel 9262, 9400, 9538 Channel 4132, 4185, 4233 Emission designator(s) FDD Mode: 4M07F9W Antenna Type  Integrated (enclosure)  External - dedicated, no RF- connector  External, separate RF-connector  Value from Data sheet GSA.8827.A.101111 Phoenix for 1m cable length Antenna Gain Tx (main) 850MHz Band: -0.44dBd (1.71 dBi) 1900MHz Band: 2.32dBi Antenna Gain Dx (diversity)  Not applicable MAX Output Power: Calculated with antenna details for 1m cable length: Radiated FDD-Mode 2 24.14 (AV) + 2.32dBi (1m cable) = 26.46 dBm EIRP FDD-Mode 5 23.59 (AV) - 0.44dBd (1m cable) = 23.15 dBm ERP MAX Output Power: Conducted FDD-Mode 2 24.14 (AV) FDD-Mode 5 23.59 (AV) Installed option  GSM 900 and GSM 1800 Bands (not usable in USA/Canada)  W-CDMA Band I and Band VIII (not usable in USA/Canada) Power supply  Board (AE1):over AC/DC adapter: 120V/60 Hz  DC power only: VNOM=3.8 Volt, Range: VMIN = 3.3V, VMAX = 4.4V Special EMI components -- Does EUT contain devices  yes susceptible to magnetic fields, e.g.  no Hall elements, electrodynamics microphones, etc.? EUT sample type  Production  Pre-Production  Engineering FCC label attached  yes  no CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 7 of 33 3.2. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware status software status tion*) GSM/W-CDMA IMEI: EUT A Module SARA-U201 357520070020 261A01 23.56 959 GSM/W-CDMA IMEI: EUT B Module SARA-U201 357520070020 261A01 23.56 918 EUT C -- -- -- -- -- *) EUT short description is used to simplify the identification of the EUT in this test report. 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) AE 1 AC/DC power adapter UUX-324-1215 F04-0026561 -- -- AE 2 Evaluation Test Board EVB-WL3 BS090514 -- -- AE 3 Headset HDC-5 -- -- -- Taoglas GSATT150500 AE 4 Cellular antenna GSA.8827.A.101111 -- -- 1611 phoenix AE 5 USB cable Mini-USB to USB A -- 1.5m -- Dell Latitude Win 7 + Putty- AE 6 2120 “ctc062011” -- Notebook Program *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 3.4. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) EUT A + AE 1 + AE 2+ AE 3+ AE 4 + AE set. 1 AE 6 used temporary for AT commands 5 + AE 6 Conducted RF-tests performed except power EUT B + AE 1 + AE 2+ AE 3+ AE 4 + AE set. 2 conducted measurements, 5 + AE 6 AE 6 used temporary for AT commands *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 8 of 33 3.5. EUT operating modes EUT Description of Additional information operating operating modes mode no.*) A communication link is established between the mobile station (UE) and the test op. 1 simulator. The transmitter is operated on its maximum rated output FDD-Band 2 power class: 21 dBm or 24dBm nominal. The input signal to the receiver is modulated with normal test modulation. 12.2 kbps RMC The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link according Table E5.1/Table E5.1A as described in 3GPP TS34.121, Annex E. A communication link is established between the mobile station (UE) and the test op. 2 simulator. The transmitter is operated on its maximum rated output FDD-Band 5 power class: 21 dBm or 24dBm nominal. The input signal to the receiver is modulated with normal test modulation. 12.2 kbps RMC The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link according Table E5.1/Table E5.1A as described in 3GPP TS34.121, Annex E. *) EUT operating mode no. is used to simplify the test report. 3.6. Configuration of cables used for testing Cable S/N HW Cable length number Item Type serial number hardware status Cable 1 USB cable Mini-USB to USB A -- 1.5m -- CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 9 of 33 4. Description of test system set-up’s 4.1. Test system set-up for conducted measurements at antenna port Cellular Conducted RF-Setup 1 (Cel-1 Set-up) Tests Specification: Conducted spurious emissions, Emission Bandwidth General Description: The EUT‘s RF-signal is coupled out by a suitable antenna coupling connector (1). The signal is first attenuated (2) before it is 0° divided by a power divider (3). One of the RF- signal path is connected to the test unit communication tester (4), other RF-path is connected to the spectrum – analyzer (5) for specific RF-measurements. The specific attenuation losses for both signal paths/branches are determined prior to the measurement within a set-up calibration. These are then taken into account by correcting the measurement readings on the spectrum-analyzer. Schematic: Used Equipment: Passive Elements Test Equipment Remark:  10 dB  CMU200 See List of equipment under each test Attenuator Communication Test- case and chapter 8 for calibration info (#530) Unit for GSM/W- CDMA  Low loss RF-  DC-Power Supply cables  6 dB resistive  Spectrum-Analyser power divider/coupler (#529) Testing method: ANSI C63.26-2015, KDB 971168 D01 v02r02 Measurement uncertainty: See chapter Measurement Uncertainties (Cel-1) CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 10 of 33 Cellular Conducted RF-Setup 2 (Cel-2 Set-up) Tests Specification: Conducted Carrier power, Frequency Error Schematic: Following modified test set-up apply for tests performed inside the climatic chamber (frequency stability) or conducted RF-carrier power-measurement. The EUT RF-Signal is directly connected over suitable RF-connector over low-loss cable and an attenuator (2) to the cellular radio communication test-unit. (5) Testing method: ANSI C63.10:2013, KDB 971168 D01 v02r02 Used Equipment Passive Elements Test Equipment Remark:  20 dB  CMU200 See List of equipment under each Attenuator Communication Test- test case and chapter 8 for (#613) Unit for GSM/W-CDMA calibration info  Low loss RF-  DC-Power Supply cables Measurement uncertainty See chapter Measurement Uncertainties (Cel-2) CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 11 of 33 4.2. Test system set-up for radiated spurious emission measurements Specification: ANSI C63.4-2014 chapter 8.3, ANSI C63.10-2013 chapter 6.6.3.3 & 6.6.4 General Description: Evaluating the emissions have to be done first by an exploratory emissions measurement and a final measurement for most critical frequencies. The tests are performed in a CISPR 16-1-4:2010 compliant fully anechoic room (FAR) recognized by the regulatory commission. The measurement distance was set to 3 meter for frequencies up to 18 GHz and 2 meter above 18 GHz. A logarithmic periodic antenna is used for the frequency range 30 MHz to 1 GHz. Horn antennas are used for frequency range 1 GHz to 40 GHz. The EUT is aligned within 3 dB beam width of the measurement antenna with three orthogonal axis measurements on the EUT. Schematic: Testing method: Exploratory, preliminary measurements Final measurement on critical frequencies The EUT and its associated accessories are placed Based on the exploratory measurements, the most on a non-conductive position manipulator (tipping critical frequencies are re-measured by main- device) of 1.50 m height which is placed on the taining the EUT’s worst-case operation mode, turntable. By rotating the turntable (range 0° to cable position, etc. 360°, step 45°) and the EUT itself on 3- First a frequency zoom around the critical orthogonal axis (the emission spectrum and it’s frequency is done to locate the frequency more characteristics was recorded with an EMI- precisely. After this step, for all identified critical receiver, broadband antenna and software. frequencies, the maximum peak was determined. The measurements are performed in horizontal Following parameters were varied: the turntable and vertical polarization of the measurement angle continuously in the range 0 to 360 degree, antennas. The results are documented in a the EUT itself over 3-orthogonal axis and the diagram. Critical frequencies (low margin to height for EUT with large dimensions. limit) are saved within a table for further On the determined worst-case position, a final investigations. If various operating modes are measurement with necessary bandwidth and supported, further investigations are made to find detector according standard has been carried out. the worst-case of them. Also the interconnection The readings on the spectrum analyzer are cables and equipment position were varied in corrected with conversion value between field order to maximize the emissions. strength and E(I)RP, so the readings shown are equivalent to ERP/EIRP values. Critical measurements near the limit are re-measured with a substitution method accord. ANSI/TIA/EIA 603 C/D Formula: EC = ER + AF + CL + DF - GA (1) EC = Electrical field – corrected value ER = Receiver reading EcE(I)RP = Ec - 95.2 dB M = Margin LT = Limit M = LT - EcE(I)RP AF = Antenna factor CL = Cable loss DF = Distance correction factor (if used) GA = Gain of pre-amplifier (if used) EcE(I)RP = Electrical field corrected for E(I)RP All units are dB-units, positive margin means value is below limit. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 12 of 33 5. Measurements 5.1. RF-Parameter - RF Peak power output conducted and PAPR-Value 5.1.1. Test location and equipments (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2 test site  347 Radio.lab. 1  Radio.lab. 2 spectr. analys.  584 FSU  489 ESU 40  264 FSEK  620 ESU 26 signaling  392 MT8820A  436 CMU  547 CMU  460 CMU otherwise Filter  400 FTC40x15E  401 FTC40x15E  110 USB LWL  482  378 RadiSense Matrix DC power  611 E3636A  463 HP3245A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE 40 otherwise  331 HC 4055  248 6 dB Att.  529 Power div.  - cable OTA20 line voltage  230 V 50 Hz via public mains  060 120 V/ 60 Hz via PAS 5000 5.1.2. Requirements and limits  §2.1046  §22.913(a)(2) FCC  § 24.232(c)  § 27.50(d)(4)  RSS-132, Issue 3: 5.4 + SRSP 503:5.1.3 IC  RSS-133, Issue 6: 4.1/6.4 + SRSP-510:5.1.2  RSS-139, Issue 3: 6.5 KDB 971168 D01 v02r02, October 2014 ANSI C63.26-2015, Chapter 5.2 Maximum Power Output of the wireless device should be determined while measured radiated E(I)RP  Limit FDD Band 5: 7 Watt ERP (38.4 dBm) Limits  Limit FDD Band 2: 2 Watt EIRP (33.0 dBm)  Limit FDD Band 4: 1 Watt EIRP (30.0 dBm) PAPR ≤ 13dB 5.1.3. Test condition and test set-up Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% Test system set-up Please see chapter “Test system set-up for conducted measurements on antenna port” ANRITSU The measurements were performed with the integrated power measurement function of the „radio communication tester CMU200 from Rohde&Schwarz company. In this way spectrum-analyzers instrument limitations can be avoided or minimized. Instead, CMU manufacturers declared measurement error can be considered for this measurement. The attenuation (insertion loss) at the RF Inputs/Outputs of CMU were set according the path loss of the test set-up, determined in a step before starting the measurements. A suitable artificial antenna Measurement method or RF-connector is provided by the applicant in order to perform the conducted measurements. Any data provided with the artificial antenna or connector, have been taken in account in order to correct the measurement data. (typical 0.3dB for attenuation of antenna connector) Peak and Average Values have been recorded for each channel on test set-up Cel-1. The Peak-to - Average-Power Ratio is determined by devices integrated CCDF capability with corresponding settings. (see annex 1 plots) A call was established on highest power transmit conditions in GMSK and RMC99 mode. UE is set TX mode, highest transmit power conditions, DTX, MPR or other power saving techniques have been disabled EUT settings The measurements were made at the low, middle and high carrier frequencies of each of the supported operating band. Choosing three TX-carrier frequencies of the wireless device, should be sufficient to demonstrate compliance. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 13 of 33 5.1.4. Measurement Results FDD Band 2 EUT Set-up 2, Op. Mode 1 Power value [dBm] Limit UARFCN no. UARFCN no. UARFCN no. Test case 9262 9400 9538 Result PK AV PK AV PK AV [dBm] Release 99 26.76 23.59 26.59 23.49 26.49 23.47 33 Passed 12.2kbps RMC Peak-to-Average power ratio on 0.1% probability 2.92 2.88 2.85 13 Passed [dB] Remark: 1.) AV-values within applicant’s declared power range (tune-up range) FDD Band 5 EUT Set-up 1, Op. Mode 2 Power value [dBm] Limit UARFCN no. UARFCN no. UARFCN no. Test case 4132 4185 4233 Result PK AV PK AV PK AV [dBm] Release 99 26.8 23.8 26.75 23.74 27.05 24.14 38.4 Passed 12.2kbps RMC Peak-to Average ratio [dB] 2.80 2.77 2.79 13 Passed Remark: 2.) AV-values within applicant’s declared power range (tune-up range) CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 14 of 33 5.2. RF-Parameter - Occupied bandwidth and emission bandwidth 5.2.1. Test location and equipments (for reference numbers please see chapter 'List of test equipment') test site  347 Radio.lab. 1  Radio.lab. 2 spectr. analys.  584 FSU  489 ESU  264 FSEK  620 ESU26 attenuator  530 10 dB   signaling  392 MT8820A  436 CMU  547 CMU DC Power  611 E3636A  087 EA3013  354 NGPE 40  086 LNG50-10 otherwise  529 6dB divider  530 10dB line voltage  230 V 50 Hz via public mains  060 120 V/ 60 Hz via PAS 5000 5.2.2. Requirements and Limits CFR47, §2.202(a), §2.1049(h) FCC  FDD-Band 5: §22.917(b)  FDD-Band 2: §24.238(b) „the occupied bandwidth is the frequency bandwidth, such that, below it lower and IC  RSS-Gen, Issue 4: §6.6 above it upper frequency limits, the mean powers radiated are each equal to 0.5 percent ANSI C63.26-2015 of the total mean power radiated” KDB 971168 D01 v02r02, Chapter 4 5.2.3. Test condition and test set-up Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% Test system set-up Please see chapter “Test system set-up for conducted measurements at antenna port” Parameter Occupied bandwidth: Emission bandwidth Scan Mode Spectrum analyser mode Spectrum analyser mode Spectrum Span 6 MHz 6 MHz Analyzer RBW 50 kHz 50 kHz Settings VBW 300 kHz 300 kHz Sweep time Coupled (Auto) Coupled (Auto) Sweep mode Repetitive, max-hold Repetitive, max-hold Detector Peak Peak The used spectrum analyzer FSE or ESU Bandwidth defined between 2 markers with are from Rohde & Schwarz contains an 26dBc compared to highest In-Band Peak integrated function to calculate the occupied Emission. bandwidth automatically. From left and right display margin, the upper and lower Measurement method frequency points where the accumulated power becomes 0.5% of the total power, are calculated. Subtracting the previous determined two frequency points, yields the occupied bandwidth. A call was established on highest power transmit conditions in RMC99 mode. EUT settings The measurements were made at the low, middle and high carrier frequencies of each of the supported operating band. Choosing three TX-carrier frequencies of the wireless device, should be sufficient to demonstrate compliance. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 15 of 33 5.2.4. Results Channel no. Occupied 99% 26 dBc Emission Operating band bandwidth bandwidth Range No. [MHz] [MHz] Set-up 2 Channel Low 9262 4.057692308 4.625000000 (1852.4 MHz) FDD Band 2 Channel Middle 9400 4.057692308 4.615384615 (1880.0 MHz) Channel High 9538 4.057692308 4.615384615 (1907.6 MHz) Channel Low 4132 4.067307692 4.644230796 (826.4 MHz) FDD Band 5 Channel Middle 4185 4.076923077 4.634615385 (836.6 MHz) Channel High 4233 4.067307692 4.625000000 (846.6 MHz) Remarks: see diagrams in separate annex 4 CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 16 of 33 5.3. RF-Parameter - Conducted out of Band RF emissions and Band Edge 5.3.1. Test location and equipments (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 test site  347 Radio.lab. 1  Radio.lab. 2 spectr. analys.  584 FSU  120 FSEM  264 FSEK  489 ESU signaling  017 CMD 65  323 CMD 55  340 CMD 55 signaling  392 MT8820A  436 CMU  670 CMU power supply  611 E3636A  457 EA 3013A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE 40 otherwise  529 6dB divider  530 10dB Att.  431 Near field line voltage  230 V 50 Hz via public mains  060 120 V/ 60 Hz via PAS 5000 5.3.2. Requirements and limits §2.1051 §2.1057 FCC §22.917(a)(b) §24.238(a)(b) IC  FDD-Band 5: RSS-132, Issue 3: 5.5(i)(ii)  FDD-Band 2: RSS-133, Issue 6: 6.5.1(i)(ii) ANSI C63.26-2015 Limit „the power of emissions shall be attenuated below the transmitter output power (p) by at least 43+10Log(P) dB“ 5.3.3. Test condition and test set-up Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% Test system set-up Please see chapter “Test system set-up for conducted measurements on antenna port” The spectrum was scanned from 9 kHz to the 10th harmonic of the highest frequency generated within the equipment. A PEAK detector was used except measurements near the Band-Edge where a AVERAGE detector applied. Measurement method A suitable artificial antenna or RF-connector is provided by the applicant in order to perform the conducted measurements. Any data provided with the artificial antenna or connector, have been taken in account in order to correct the measurement data. (typical 0.3dB for attenuation of antenna connector) Spectrum-Analyzer settings See below tables A call was established on highest power transmit conditions in RMC99 mode. Mobile phone settings The measurements were made at the low, middle and high carrier frequencies of each of the supported operating band. Choosing three TX-carrier frequencies of the mobile phone, should be sufficient to demonstrate compliance. Spectrum-Analyzer settings for FDD Band 2 Start Stop R-BW V-BW Sweep Att. freq. freq. time Detector [dB] MHz MHz MHz MHz sec. Sweep 1 (subrange 1) 0.009 0.150 0.0001 --1.) 10 25 MaxH-PK Sweep 1 (subrange 2) 0.150 1 0.009 --1.) 10 25 MaxH-PK Sweep 1 (subrange 3) 1 30 0.1 --1.) 5 25 MaxH-PK Sweep 2 (subrange 1) 30 19500 1 --1.) >60 35 MaxH-PK Sweep 3a (Band-Edge) 1849 1850 0.05 --1.) 30 35 MaxH-PK Sweep 3b (Band-Edge) 1849 1850 0.05 --1.) 30 35 MaxH-AV Sweep 4a (Band-Edge) 1910 1911 0.05 --1.) 30 35 MaxH-PK Sweep 4b (Band-Edge) 1910 1911 0.05 --1.) 30 35 MaxH-AV Remark: 1.) EMI 6dB receiver mode used CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 17 of 33 Spectrum-Analyzer Settings FDD Band 5 Start Stop R-BW V-BW Sweep freq. freq. time Att. Detector MHz MHz MHz MHz sec. Sweep 1 (subrange 1) 0.009 0.150 0.0001 --1.) 10 25 MaxH-PK Sweep 1 (subrange 2) 0.150 1 0.009 --1.) 10 25 MaxH-PK Sweep 1 (subrange 3) 1 30 0.1 --1.) 5 25 MaxH-PK Sweep 2 (subrange 1) 30 9000 1 --1.) >60 35 MaxH-PK Sweep 3a (Band-Edge) 823 824 0.05 --1.) 30 35 MaxH-PK Sweep 3b (Band-Edge) 823 824 0.05 --1.) 30 35 MaxH-AV Sweep 4a (Band-Edge) 850 851 0.05 --1.) 30 35 MaxH-PK Sweep 4b (Band-Edge) 850 851 0.05 --1.) 30 35 MaxH-AV Remark: 1.) EMI 6dB receiver mode used 5.3.4. Results The results are presented below in summary form only. For more information please see each diagramm enclosed in annex 4. 5.3.4.1. FDD Band 2: Op. Mode 1, Set-up 2 Result Dia- Carrier Channel OP- Used detector gram Frequency range mode Remark no. no. Range No. PK AV QP 36.01 Low 9kHz to 30MHz --    passed 30 MHz to Carrier visible on diagram, 36.02 Low 9262    passed 19.5GHz not relevant for results 37.01 Low 1849 – 1850 MHz Band Edge Compliance    passed 36.03 Middle 9kHz to 30MHz --    passed 9400 30 MHz to 1 Carrier visible on diagram, 36.04 Middle    passed 19.5GHz not relevant for results 36.05 High 9kHz to 30MHz --    passed 30 MHz to Carrier visible on diagram, 36.06 High 9538    passed 19.5GHz not relevant for results 37.02 High 1910 – 1911 MHz Band-Edge compliance    passed Remark: -- 5.3.4.2. FDD Band 5: Op. Mode 2, Set-up 2 Result Dia- Carrier Channel OP- Used detector gram Frequency range mode Remark no. no. Range No. PK AV QP 36.07 Low 9kHz to 30MHz --    passed Carrier visible on diagram, 36.08 Low 4132 30 MHz to 9GHz    passed not relevant for results 37.03 Low 822 – 824 MHz Band Edge Compliance    passed 36.09 Middle 9kHz to 30MHz 2 --    passed 4185 36.10 Middle 30 MHz to 9GHz Carrier visible on diagram,    passed 36.11 High 9kHz to 30MHz not relevant-- for results    passed 36.12 High 4233 30 MHz to 9GHz Carrier visible on diagram,    passed 37.04 High 849 – 851 MHz not relevantcompliance Band-Edge for results    passed Remark: -- CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 18 of 33 5.4. RF-Parameter - Radiated out of Band RF emissions and Band Edge 5.4.1. Test location and equipments (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 test site  441 EMI SAR  487 SAR NSA  443 FAR  347 Radio.lab.1  347 Radio.lab.2 receiver  377 ESCS30  001 ESS  489 ESU 40  ESU 26 spectr. analys.  584 FSU  120 FSEM  264 FSEK antenna  439 HL 562  549 HL 025  302 BBHA9170  289 CBL 6141  030 HFH-Z2 477 GPS signaling  017 CMD 65  323 CMD 55  340 CMD 55 signaling  392 MT8820A  546 CMU  547 CMU power supply  611 E3636A  457 EA 3013A  459 EA 2032-50  268 EA- 3050  494 AG6632A 498 NGPE 40 otherwise  529 6dB divider  530 6dB Att.  110 USB LWL  482 Filter Matrix  431 Near field line voltage  230 V 50 Hz via public mains  060 120 V/ 60 Hz via PAS 5000 5.4.2. Requirements and limits General: §2.1053(a) , §2.1057(a)  FDD Band 5: Part 22: §22.917(a)(b) FCC  FDD Band 2: Part 24: §24.238(a)(b)  FDD Band 4: Part 27: §27.53(h)  FDD Band 5: RSS-132, Issue 3: 5.5(i)(ii) IC  FDD Band 2: RSS-133, Issue 6: 6.5.1(i)(ii)  FDD Band 4: RSS-139, Issue 3: 6.6 (i)(ii) „the power of emissions shall be attenuated below the transmitter output power (p) by at least 43+10Log(P) Limit dB“ -> Resulting limits for all power levels of the Mobile Phone: -13dBm 5.4.3. Test condition and test set-up link to test system (if used):  air link  cable connection  EUT-grounding  none  with power supply  additional connection Equipment set up  table top  floor standing Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% Test system set-up Please see chapter “Test system set-up for radiated spurious emission measurements up to 20 GHz” The spectrum was scanned from 9 kHz to the 10th harmonic of the highest frequency generated within the equipment. A PEAK detector was used except measurements near the Band-Edge where a AVERAGE detector applied for critical measurements. Measurement method According chapter 4.2 A call was established on highest power transmit conditions in RMC99 mode. The measurements were made at the low, middle and high carrier frequencies of each of the supported EUT settings operating band. Choosing three TX-carrier frequencies of the wireless device, should be sufficient to demonstrate compliance. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 19 of 33 Spectrum-Analyzer settings for FDD band 2 Start Stop R-BW V-BW Sweep Att. freq. freq. time Detector [dB] MHz MHz MHz MHz sec. Sweep 1 (subrange 1) 30 1000 1 1 10 10 MaxH-PK Sweep 1 (subrange 2) 1000 2800 1 1 15 0 MaxH-PK Sweep 1 (subrange 3) 2800 20000 1 1 60 10 MaxH-PK Sweep 2a (Band-Edge) 1849 1850 30 35 MaxH-PK Sweep 2b (Band-Edge) 1849 1850 30 35 MaxH-AV 0.05 0.5 Sweep 3a (Band-Edge) 1910 1911 30 35 MaxH-PK Sweep 3b (Band-Edge) 1910 1911 30 35 MaxH-AV Spectrum-analyzer settings for FDD Band 5 Start Stop R-BW V-BW Sweep freq. freq. time Att. Detector MHz MHz MHz MHz sec. Sweep 1 (subrange 1) 30 1000 1 1 10 10 MaxH-PK Sweep 1 (subrange 2) 1000 2800 1 1 15 0 MaxH-PK Sweep 1 (subrange 3) 2800 12000 1 1 160 10 MaxH-PK Sweep 2a (Band-Edge) 823 824 30 35 MaxH-PK Sweep 2b (Band-Edge) 823 824 30 35 MaxH-AV 0.05 0.5 Sweep 3a (Band-Edge) 850 851 30 35 MaxH-PK Sweep 3b (Band-Edge) 850 851 30 35 MaxH-AV CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 20 of 33 5.4.4. Results The results are presented below in summary form only. For more information please see each diagramm enclosed in annex 4. 5.4.4.1. FDD Band 2: Op. Mode 1, Set-up 1 Result Dia- Carrier Channel OP- Used detector gram Frequency range mode Remark no. no. Range No. PK AV QP 30 MHz to Carrier visible on diagram. 8.20 Low    passed 19.5GHz Not relevant for results 9262 Band Edge Compliance 9.20 Low 1849 – 1850 MHz    passed 30 MHz to 19.5 Carrier visible on diagram. 8.21 Middle 9400 1    passed GHz Not relevant for results 30 MHz to 19.5 Carrier visible on diagram. 8.22 High    passed GHz Not relevant for results 9538 Band-Edge compliance: 9.21 High 1910 – 1911 MHz    passed Remark: -- 5.4.4.2. FDD Band 5: Op. Mode 2, Set-up 1 Result Dia- Carrier Channel OP- Used detector gram Frequency range mode Remark no. no. Range No. PK AV QP Carrier visible on diagram. 8.50 Low 30 MHz to 9 GHz    passed Not relevant for results 4132 Band Edge Compliance 9.50 Low 823 – 824 MHz    passed Carrier visible on diagram. 8.51 Middle 4185 30 MHz to 9 GHz 2    passed Not relevant for results Carrier visible on diagram. 8.52 High 30 MHz to 9 GHz    passed Not relevant for results 4233 Band-Edge compliance 9.51 High 849 – 850 MHz    passed Remark: a mathematical correction of used RBW=30kHz for measurements to required 1% RBW of EBW was used CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 21 of 33 5.5. RF-Parameter - Frequency stability on temperature and voltage variations 5.5.1. Test location and equipments (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 test site  347 Radio.lab.1  Radio.lab.2   spectr. analys.  584 FSU  489 ESU 40  264 FSEK  620 ESU 26   signaling  392 MT8820A  436 CMU  547 CMU DC power  456 EA 3013A  457 EA 3013A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE 40 otherwise  529 6dB divider  530 10dB Att.  431 Near field  341 Fluke 112 Climatic test  331 HC 4055  331 VT 4002  627 OPUS 1 chamber line voltage  230 V 50 Hz via public mains  060 120 V/ 60 Hz via PAS 5000 5.5.2. Requirements and limits §2.1055(a)(1)  FDD Band 5: §22.355, Table C-1 FCC  FDD Band 2: §24.235  FDD Band 4: §27.54  FDD Band 5: RSS-132, Issue 3: 5.3 IC  FDD Band 2: RSS-133, Issue 6: 6.3  FDD Band 4: RSS-139, Issue 3: 6.4 ANSI C63.26-2015, chapter 5.6 “The frequency stability shall be sufficient to ensure that the fundamental emission stays Limit within the authorized frequency block” 5.5.3. Test condition and test set-up Please see chapter “Test system set-up for conducted measurements on antenna port” Test system set-up In order to maintain the voltage constant over the time period of the tests, a dummy battery was connected to a laboratory power supply. The power supply voltage was controlled on the input of the power supply terminals of the EUT. The RF Channel spacing is 200 kHz according W-CDMA-Spec, with a guard band. The aim of the EUT is to function under all extreme conditions within authorized sub-bands in regard to temperature and voltage variations. The frequency deviation was recorded with base station’s build in capability. Measurement method (CMU) As the standard requires that the fundamental emissions stays within the authorized band, a limit of 0.1ppm is considered low enough to ensure this. A call was established on highest power transmit conditions in RMC99 mode. The measurements were made at the low, middle and high carrier frequencies of each of the supported Mobile phone settings operating band. Choosing three TX-carrier frequencies of the mobile phone, should be sufficient to demonstrate compliance. Tests have been done in Rel99, 12.2 kbps RMC operating mode. 5.5.3.1. Frequency shift of carrier against a voltage range at constant nominal temperature of 20° Celsius 1.) determine the carrier frequency for the lowest and highest channel at room temperature and nominal voltage [20°C] 2.) The voltage was reduced in 0.1 Volt steps to the lower end point, where the mobile phone stops working. (this shall be specified by the manufacturer) Record the carrier frequency shift within 2 minutes after powering on the mobile phone, to prevent for self heating effects. 3.) The voltage was increased in 0.1 Volt steps to the upper declared voltage of the battery. Record the carrier frequency shift within 2 minutes after powering on the mobile phone, to prevent for self heating effects. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 22 of 33 5.5.4. Measurement Results: 5.5.4.1. FDD Band 5 FDD Band V - Channel 4185 Voltage Nominal Maximum frequency error Verdict Frequency [V] [MHz] [Hz] [ppm] Limit= +/- 2.5ppm 3,30 -27 -0,032 3,80 8,370E+08 -28 -0,033 passed 4,40 -29 -0,035 FDD Band V - Channel 4132 Voltage Nominal Maximum frequency error Verdict Frequency [Hz] [ppm] Limit= +/- 2.5ppm [V] [MHz] 3,30 -30 -0,036 3,80 8,264E+08 -31 -0,038 passed 4,40 -29 -0,035 FDD Band V - Channel 4233 Voltage Nominal Maximum frequency error Verdict Frequency [Hz] [ppm] Limit= +/- 2.5ppm [V] [MHz] 3,30 24 0,028 3,80 8,466E+08 24 0,028 passed 4,40 -29 -0,034 CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 23 of 33 5.5.4.2. FDD Band 2 FDD Band 2 - Channel 9400 Voltage Nominal Maximum frequency error Verdict Frequency [V] [MHz] [Hz] [ppm] Limit= +/- 0.1ppm 3,30 -59 -0,031 3,80 1,880E+09 -56 -0,030 passed 4,40 -59 -0,031 FDD Band 2 - Channel 9262 Voltage Nominal Maximum frequency error Verdict Frequency [Hz] [ppm] Limit= +/- 0.1ppm [V] [MHz] 3,30 -59 -0,032 3,80 1,852E+09 -62 -0,033 passed 4,40 -56 -0,030 FDD Band 2 - Channel 9538 Voltage Nominal Maximum frequency error Verdict Frequency [Hz] [ppm] Limit= +/- 0.1ppm [V] [MHz] 3,30 50 0,026 3,80 1,9076E+09 -57 -0,030 passed 4,40 -58 -0,030 CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 24 of 33 5.5.4.3. Frequency shift of carrier against temperature at constant power supply voltage 1.) determine the carrier frequency for the lowest, middle and highest channel at room temperature and nominal voltage [20°C] 2.) expose the mobile station to –30°C, wait sufficient time to have constant temperature. 3.) Perform the carrier frequencies measurements in 10°C increments from –30°C to +50°C. For about half hour at the specified temperature the mobile was powered-off. After powering-on, the measurements were made within 2 minute for the channel lower channel, in order to prevent self-warming of the mobile. 5.5.4.4. FDD Band 2 Maximum frequency error Channel Channel Channel Channel Channel Channel Verdict 9262 9400 9538 9262 9400 9538 Temperature [Hz] [ppm] Limit=±0.1ppm -30 52 -58 69 0,000 -0,031 0,036 -20 50 -57 52 0,027 -0,030 0,027 -10 -57 -38 -58 -0,031 -0,020 -0,030 0 -59 -57 -57 -0,032 -0,030 -0,030 10 -62 51 -62 -0,033 0,027 -0,033 PASS 20 -58 52 -57 -0,031 0,028 -0,030 30 -59 -65 -58 -0,032 -0,035 -0,030 40 -56 -57 -61 -0,030 -0,030 -0,032 50 -56 -56 51 -0,030 -0,030 0,027 CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 25 of 33 5.5.4.5. FDD Band 5 Maximum frequency error Verdict Channel Channel Channel Channel Channel Channel 4132 4185 4233 4132 4183 4233 Limit=±0.1ppm Temperature [Hz] [ppm] -30 31 27 26 0,038 0,032 0,031 -20 29 26 25 0,035 0,031 0,030 -10 -26 -28 -26 -0,031 -0,033 -0,031 0 -29 -28 -30 -0,035 -0,033 -0,035 10 -30 -29 -32 -0,036 -0,035 -0,038 Pass 20 -32 -30 -28 -0,039 -0,036 -0,033 30 -29 -30 -30 -0,035 -0,036 -0,035 40 -31 -28 -31 -0,038 -0,033 -0,037 50 18 -7 -9 0,022 -0,008 -0,011 CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 26 of 33 5.6. General Limit - Radiated field strength emissions below 30 MHz 5.6.1. Test location and equipment test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 test site  441 EMI SAR  487 SAR NSA  347 Radio.lab.   receiver  377 ESCS30  001 ESS     spectr. analys.  584 FSU  120 FSEM  264 FSEK    antenna  574 BTA-L  133 EMCO3115  302 BBHA9170  289 CBL 6141  030 HFH-Z2  477 GPS signaling  392 MT8820A  371 CBT32  547 CMU  594 CMW otherwise  400 FTC40x15E  401 FTC40x15E  110 USB LWL  482 Filter Matrix  378 RadiSense DC power  456 EA 3013A  457 EA 3013A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE 40 line voltage  230 V 50 Hz via public mains  060 120 V 60 Hz via PAS 5000 5.6.2. Requirements IC RSS-Gen., Issue 4: Chapter 8.9, Table 5 ANSI C63.10-2009 Frequency Field strength limit Measurement [MHz] [μV/m] [dBμV/m] Distance Remarks [m] 0.009 – 0.490 2400/f (kHz) 67.6 – 20Log(f) (kHz) 300 ANSI 63.10:2013 Correction factor used due to 0.490 – 1.705 24000/f (kHz) 87.6 – 20Log(f) (kHz) 30 measurement distance of 3 m 1.705 – 30 30 29.5 30 5.6.3. Test condition and test set-up Signal link to test system (if used):  air link  cable connection  none EUT-grounding  none  with power supply  additional connection Equipment set up  table top  floor standing Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)%  9 – 150 kHz RBW/VBW = 200 Hz Scan step = 80 Hz Scan data  150 kHz – 30 MHz RBW/VBW = 9 kHz Scan step = 4 kHz  other: EMI-Receiver or Scan-Mode  6 dB EMI-Receiver Mode  3dB Spectrum analyser Mode Analyzer Settings Detector Peak (pre-measurement) and Quasi-PK/Average (final if applicable) Mode: Repetitive-Scan, max-hold Sweep-Time Coupled – calibrated display if continuous signal otherwise adapted to EUT’s individual transmission duty-cycle General measurement procedures Please see chapter “Test system set-up radiated magnetic field measurements below 30 MHz” 5.6.4. Measurement Results The results are presented below in summary form only.For more information please see the diagrams. Table of measurement results: Carrier Set- OP- Diagram Frequency Used detector Channel up mode Remark Result No. range no. no. Range No. PK AV QP 2.20 Low 9262 9 kHz-30 MHz 1 1 --    passed 2.50 Low 4132 9 kHz-30 MHz 1 2 --    passed 2.21 Middle 9400 9 kHz-30 MHz 1 1 --    passed 2.51 Middle 4183 9 kHz-30 MHz 1 2 --    passed 2.22 High 9538 9 kHz-30 MHz 1 1 --    passed 2.52 High 4233 9 kHz-30 MHz 1 2 --    passed CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 27 of 33 5.6.5. Correction factors due to reduced meas. distance (f< 30 MHz) The used correction factors when the measurement distance is reduced compared to regulatory measurement distance, are calculated according Extrapolation formulas valid for EUT’s with maximum dimension of 0.625xLambda. Formula 2+3+4 as presented in ANSI C63.10, Chapter 6.4.4 are used for the calculations of proper extrapolation factors. CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 28 of 33 5.7. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based on a RF-Measurement Reference Frequency range Remarks confidence level of 95% Conducted emissions 9 kHz - 150 kHz 4.0 dB CISPR 16-2-1 - (U CISPR) 150 kHz - 30 MHz 3.6 dB Radiated emissions 30 MHz - 1 GHz 4.2 dB CISPR 16-2-3 E-Field Enclosure 1 GHz - 18 GHz 5.1 dB Disturbance power CISPR 16-2-2 30 MHz - 300 MHz - - Substitution Power Output radiated - 30 MHz - 4 GHz 3.17 dB method Cel- Cel- Set-up No. BT1 W1 W2 -- C1 C2 Power Output conducted - 9 kHz - 12.75 GHz N/A 0.60 0.7 0.25 N/A -- - 12.75 - 26.5GHz N/A 0.82 -- N/A N/A -- Conducted emissions - 9 kHz - 2.8 GHz 0.70 N/A 0.70 N/A 0.69 -- N/A - not on RF-port 2.8 GHz - 12.75GHz 1.48 N/A 1.51 N/A 1.43 -- applicable 12.75 GHz - 18GHz 1.81 N/A 1.83 N/A 1.77 -- 18 GHz - 26.5GHz 1.83 N/A 1.85 N/A 1.79 -- 0.1272 ppm (Delta Marker) Frequency Occupied bandwidth - 9 kHz - 4 GHz error 1.0 dB Power - 0.1272 ppm (Delta Marker) Frequency Emission bandwidth 9 kHz - 4 GHz error - See above: 0.70 dB Power Frequency stability - 9 kHz - 20 GHz 0.0636 ppm - 150 kHz - 30 MHz 5.0 dB Magnetic Radiated emissions 30 MHz - 1 GHz 4.2 dB field - Enclosure 1 GHz - 20 GHz 3.17 dB E-field Substitution Table: measurement uncertainties, valid for conducted/radiated measurements CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 29 of 33 6. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropically radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Dokuments from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power 7. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) FCC, Federal Communications 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) (MRA US-EU Commission 558 Radiated Measurements above 1 GHz, 3 m (FAR) 0003) Laboratory Division, USA 348 Mains Ports Conducted Interference Measurements 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) IC, Industry Canada Certification 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) and Engineering Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 30 of 33 8. Instruments and Ancillary 8.1. Used equiment “CTC” The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 8.1.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 053 Audio Analyzer UPA3 860612/022 Firm. V 4.3 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 140 Signal Generator SMHU 831314/006 Firm.= 3.21 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 355 Power Meter URV 5 891310/027 Firm.= 1.31 365 10V Insertion Unit 50 Ohm URV5-Z2 100880 Eprom Data = 31.03.08 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 9.15.00 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 9.15.00 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Firmware Bios 3.40 , Analyzer 3.40 Sp 2 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 670 Univ. Radio Communication Tester CMU 200 106833 µP1 =V8.50, Firmware = V.20 689 Vector Signal Generator SMU200 100970 02.20.360.142 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 31 of 33 8.1.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 30.05.2017 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 30.05.2017 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 30.05.2017 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 30.04.2017 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 30.05.2019 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO 36/12 M - 31.03.2017 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 30.04.2018 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 30.04.2018 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 30.04.2017 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 WRCT 1900/2200-5/40- 066 notch filter (WCDMA; FDD1) 5 Wainwright GmbH 12 M 1g 30.06.2016 10EEK 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 30.04.2018 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 30.04.2018 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 30.05.2019 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 30.04.2018 140 Signal Generator SMHU 831314/006 Rohde & Schwarz 24 M - 30.05.2018 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 30.05.2018 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 30.05.2018 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 30.05.2019 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 30.05.2018 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 30.05.2018 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 287 pre-amplifier 25MHz - 4GHz AMF-2D-100M4G-35-10P 379418 Miteq 12 M 1c 30.06.2017 291 high pass filter GSM 850/900 WHJ 2200-4EE 14 Wainwright GmbH 12 M 1c 30.06.2017 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 30.05.2017 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 31.03.2017 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 31.03.2017 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 Heraeus Vötsch Pre-m 2 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 30.05.2018 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 30.04.2017 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 355 Power Meter URV 5 891310/027 Rohde & Schwarz 24 M - 30.05.2018 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 30.04.2017 371 Bluetooth Tester CBT32 100153 R&S 36 M - 30.05.2019 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 12 M - 30.05.2017 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 30.05.2017 389 Digital Multimeter Keithley 2000 0583926 Keithley 24 M - 30.04.2017 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 30.05.2017 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 30.04.2017 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 31.03.2017 System CTC-FAR-EMI- ETS-Lindgren / 443 CTC-FAR-EMI-RSE - 12 M 5 30.06.2017 RSE CETECOM WRCT 1850.0/2170.0- Wainwright Instruments 448 notch filter WCDMA_FDD II 5 12 M 1c 30.06.2017 5/40- GmbH WRCT 824.0/894.0-5/40- 449 notch filter WCDMA FDD V 1 Wainwright 12 M 1c 30.06.2017 8SSK CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 32 of 33 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 30.04.2017 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 30.05.2018 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 30.04.2018 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 30.04.2018 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 30.04.2017 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d AMF-5D-02501800-25- 484 pre-amplifier 2,5 - 18 GHz 1244554 Miteq 12 M - 30.06.2017 10P System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 31.07.2017 NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 30.05.2017 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 WRCA 800/960-02/40- 512 notch filter GSM 850 SN 24 Wainwrght 12 M 1c 30.06.2017 6EEK 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 30.04.2017 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 30.05.2017 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 30.04.2017 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36/12 M - 31.07.2018 System CTC S-VSWR Verification SAR- System EMI Field SAR S- ETS 550 - 24 M - 31.07.2017 EMI VSWR Lindgren/CETECOM 552 high pass filter 2,8-18GHz WHKX 2.8/18G-10SS 4 Wainwright 12 M 1c 30.06.2017 557 System CTC-OTA-2 R&S TS8991 - Rohde & Schwarz 12 M 5 30.09.2016 System CTC FAR S- 558 System CTC FAR S-VSWR - CTC 24 M - 19.04.2017 VSWR 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2019 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 594 Wideband Radio Communication Tester CMW 500 101757 Rohde & Schwarz 12 M - 30.04.2017 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz pre-m - 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Rohde & Schwarz 24 M - 30.04.2017 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 30.04.2017 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 30.04.2017 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 30.05.2018 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 30.05.2017 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 24 M - 30.04.2017 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 24 M - 30.05.2018 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 30.05.2017 Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 30.04.2017 Solutions 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 30.05.2017 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 690 Spectrum Analyzer FSU 100302/026 Rohde&Schwarz 12 M - 30.05.2017 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 36 M - 31.03.2017 697 Power Splitter ZN4PD-642W-S+ 165001445 Mini-Circuits - 2 CETECOM_TR16_1_0019501T05a

Test Report TR16-1-0019501T05a, Page 33 of 33 8.1.3. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 9. Versions of test reports (change history) Version Applied changes Date of release -- Initial release 2016-06-21 -- -- -- CETECOM_TR16_1_0019501T05a


Document Created: 2019-03-28 10:58:42
Document Modified: 2019-03-28 10:58:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC