RF Exposure Info

FCC ID: XPB-LE

RF Exposure Info

Download: PDF
FCCID_3238458

Willow Run Test Labs, LLC 8501 Beck Road, Building 2227 Belleville, MI 48111 Phone: (734) 252-9785, Fax (734) 926-9785 e-mail: info@wrtest.com RF EXPOSURE CALCULATIONS Requirement: According to USA CFR 15 §1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. For Canada, RSS-102 sets out the requirements and measurement techniques used to evaluate radio frequency (RF) exposure compliance of radiocommunication apparatus designed to be used within the vicinity of the human body. Maximum Permissible Exposure Calculations: USA REF: 1.1310, 2.1091/1093, 447498 D01 General RF Exposure Guidance v06 Test Date: 25-Oct-16 IC REF: RSS-102 Issue 5, Safety Code 6 Test Engineer: Joseph Brunett Min. Sep. Distance: 20 cm (Mobile) EUT: Allegion LE EUT Mode: Worst Case Meas. Distance: 3 meters Canada ISED RSS-102 MPE USA FCC 1.1310 MPE Mode Freq. Worst Case E3(Avg)* E20cm(Avg) H20cm(Avg) SC6 Limit (E20cm) SC6 Limit (H20cm) Worst Case MPE Ratio E20cm Limit*** H20cm Limit*** Worst Case MPE Ratio MHz dBuV/m dBuV/m dBuA/m dBuV/m dBuA/m dBuV/m dBuA/m LF Entry 0.12500 56.90000 103.94365 52.64365 135.32826 0.00007 175.76337 124.24375 0.00026 LF Entry 13.56000 54.80000 101.84365 50.54365 148.77401 97.24263 0.00462 155.67335 104.16369 0.00208 Mode Freq. Worst Case EIRP(Avg)** E20cm(Avg) S20cm(Avg)**** SC6 Limit (S20cm) MPE Ratio S Limit MPE Ratio MHz dBm dBuV/m mW/cm2 mW/cm2 mW/cm2 BLE (module) 2400-2483.5 11.15000 129.87183 0.00259 5.47422 0.00047 1.00000 0.00259 WiLAN (module) 2400-2483.5 16.54000 135.26183 0.00897 5.47422 0.00164 1.00000 0.00897 MPE Total (<1): .007 MPE Total (<1): .014 Complies? Yes Complies? Yes *As Measured / Computed from highest fundamental emission, see fundamental emission section of this report. **EIRP, as computed from Modular Device RF Exposure Exhibits. *** For FCC MPE, use of 300 kHz limit at 125 kHz as previously allowed by FCC. **** EIRP (mW) = S (mW/cm^2) x 4 x PI x 20cm^2 Summary: The EUT with all transmitters is compliant with both the FCC power density limit and the ISED Exposure Evaluation limits.


Document Created: 2016-12-22 14:29:58
Document Modified: 2016-12-22 14:29:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC