XOJ-WA2000

FCC ID

Equipment: 802.11 IoT Module

TIBBO TECHNOLOGY -WA2000

9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH,, TAIPEI, N/A 221 Taiwan

Application
Frequency Range
Final Action Date
Granted
YZ/5EC+6BMHfOcqvo7kRMA==
2402.0-2480.0
2018-10-24
APPROVED
YZ/5EC+6BMHfOcqvo7kRMA==
2412.0-2462.0
2018-10-24
APPROVED
a4InZAvJO6X8J5+olqMqBA==
5180.0-5240.0
2018-10-24
APPROVED
a4InZAvJO6X8J5+olqMqBA==
5745.0-5825.0
2018-10-24
APPROVED
QNNdevYCuU/GF9QtcxZnoQ==
2402.0-2480.0
2018-08-10
APPROVED
YtfKlOWmTjoqcTpaBn152Q==
5180.0-5240.0
2018-08-10
APPROVED
YtfKlOWmTjoqcTpaBn152Q==
5745.0-5825.0
2018-08-10
APPROVED
File NameDocument TypeDateDirect
MPE ReportRF Exposure Info 2018-10-24 00:00:00 pdf
Test Report DTS BLETest Report 2018-10-24 00:00:00 pdf
Test Report DTSTest Report 2018-10-24 00:00:00 pdf
POACover Letter(s) 2018-10-24 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2018-10-24 00:00:00 pdf
Class II Permissive Change Cover LetterCover Letter(s) 2018-10-24 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-04-22 00:00:00 pdf
Test Report NIITest Report 2018-10-24 00:00:00 pdf
Power of AttorneyCover Letter(s) 2018-10-24 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2018-10-24 00:00:00 pdf
Class II Permissive Change LetterCover Letter(s) 2018-10-24 00:00:00 pdf
Label InfoID Label/Location Info 2018-08-10 00:00:00 pdf
Change in ID Request Letter - New ApplicantCover Letter(s) 2018-08-10 00:00:00 pdf
Change in ID Permission Letter - Original ApplicantCover Letter(s) 2018-08-10 00:00:00 pdf
External PhotosExternal Photos 2019-02-06 00:00:00 pdf

Application Details:

Equipment802.11 IoT Module
FRN0019037241
Grantee CodeXOJ
Product Code-WA2000
Applicant BusinessTIBBO TECHNOLOGY
Business Address9F-3, NO. 31, LANE 169, KANG-NING ST., HSI-CHIH, , TAIPEI, Taiwan 221
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantDmitry Slepov – Manager Director
Applicant Phone
Applicant Fax886-2-26923139
Applicant Email[email protected]
Applicant MailStop
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
Test Firm ContactKen Liu
Test Firm Phone
Test Firm Fax+886-3-211-5834
Test Firm Email[email protected]
Certified ByJoanna Hung – Specialist
Comment [a4InZAvJO6X8J5+olqMqBA==]: Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.
Comment [QNNdevYCuU/GF9QtcxZnoQ==]: Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.
Comment [YtfKlOWmTjoqcTpaBn152Q==]: Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.
Comment [YZ/5EC+6BMHfOcqvo7kRMA==]: Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC