Complementary report for SPB800 Full modular approval

FCC ID: XO2SPB800

Test Report

Download: PDF
FCCID_1631370

ham apcbost $upe t SP Es:edTy a;FCCTsled-L;bor;tory Reg. no. 93866. f'f'l? D lT@Q? 95 The test site complies with RSS—Gen, Issue 2, Date Reference Page 1002 &; file no: IC 3482¢—2 2011—08—10 FX112895—F15C 1(1) ISO/IEC 17025 > u'(l/; y””'eo\"’ $ Contact person Yigus® Fredrik Isaksson Electronics +46 10 516 55 80 HD Wireless AB fredrik.isaksson@sp.se Att: Ake Jernberger Norgegatan 1, 3 tr 164 32 KISTA Equipment Authorization measurements on 2400—2483.5 MHz Transceiver Unit with digital modulation and no FHSS FCC ID: X20SPB800 IC: 8713A—SPB800 (5 appendices) Test objects Product name: SPB800. Product number: Unit for radiated tests: SPB800—B, unit for conducted tests: SPB800—D (There is also a evaluation unit: SPB800—E). Serial number: A000776 (unit for radiated test) A000944 (unit for conducted tests). The test objects were tested stand alone as a module and connected to a PC Connection board S$PB406, s/n: 94, during the test. The PC Connection board was powered by USB (3.3 V DC) from a PC which was powered with 120 V AC/60 Hz. Summary See Appendix 1 for general information and Appendix 5 for photos. This is not a complete test, emission measurements as specified below have been performed. Standard Compliant Appendix Remarks FCC 47 CFR Part 15 C (October 2010) 15.247 Operation within the band 2400—2483.5 MHz IC RSS—210 Issue 8, June 2010 15.247 (b) (3)/ RSS—210 A8.4(4) Maximum peak conducted Yes 2 power 15.247 (d) / RSS—210 A8.5 20 dBc below fundamental Yes 3 15.247 (d) / RSS—210 A8.5 Restricted bands of Yes 3 operation 2.1049 / RSS—210 A8.5 Band Edge Yes 4 Note: Above RSS items are given as cross—reference only. Measurements were performed according to ANSI procedures referenced by FCC and covered by SP°s accreditation. SP Technical Research Institute of Sweden Electronics — EMC /n Performed by Examined by Jreqd) Ss1—— Fredrik Isaksson Christer Karlsson SP Technical Research Institute of Sweden Postal address Office location Phone /Fax / E—mail Laboratories are accredited by the Swedish Board for Accreditation and SP Vasterasen +46 10 516 50 00 Conformity Assessment (SWEDAC) under the terms of Swedish legislation. Box 857 Brineligatan 4 +46 33 13 55 02 This report may not be reproduced other than in full, except with the prior SP 302 SE—501 15 Boras SE—504 62 Boras info@sp.se written approval of the issuing laboratory. SWEDEN SWEDEN

Date Reference Page REPORT 2011-08-10 FX112895-F15C 1 (3) FCC ID: X2OSPB800 and Appendix 1 IC: 8713A-SPB800 Performance test and requirements The tests were performed to verify that SPB800 meets the electromagnetic compatibility requirements of FCC 47 CFR part 15 C. Test facility The used anechoic chamber is compliant with the requirements of section 2.948 of the FCC rules and listed, registration number 96866, as a facility accepted for certification under parts 15 and 18. The site complies with RSS Gen, Issue 2 and is accepted by Industry Canada for the performance of radiated measurements, IC-file number 3482A-2. Test object Transceiver: SPB800 Antenna: Chip antenna, Murata LDA312G7313F-237 Antenna gain (average) : -2.3 dBi Frequency range: 2412-2462 MHz Frequencies used during test: 2412 MHz 2442 MHz 2462 MHz Modulation: OFDM Data rate: 6 Mbit/s Supply voltage: 3.3 V DC, via USB The test objects were tested stand alone as a module and connected to an PC Connection board SPB406, s/n: 94, during the test. The PC Connection board was powered by USB (3.3 V DC) from a PC which was powered with 120 V AC/60 Hz. PC laptop Acer Extensa 5230E with s/w: RF test software. The PC was placed outside the anechoic chamber during the test. Preliminary testing was performed at mid channel (2442 MHz) and all data rates (modulations). The measurements were then done at 6 Mbit/s mode since this mode had the highest conducted output power. See Appendix 2. SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 2 (3) FCC ID: X2OSPB800 and Appendix 1 IC: 8713A-SPB800 Measurement equipment Measurement equipment Calibration Due SP number Test site Edison 2011-12 504 114 EMI test receiver R&S ESIB 26 2012-07 503 885 Boonton RF Peak power meter 4500A 2011-10 503 144 Boonton Peak power sensor 56518-S/4 2011-10 503 145 Bilog antenna Chase CBL 6111A 2011-11 503 182 Antenna Schaffner CBL 6143 2013-04 504 079 Horn antenna EMCO 3115 2014-01 501 548 Standard gain horn Flann 16240-25 - 503 939 Standard gain horn Flann 18240-25 - 503 900 Standard gain horn Flann 20240-20 - 503 674 Low Noise Amplifier Miteq 2012-08 503 277 Low Noise Amplifier Miteq 2012-08 504 160 High pass filter Wainwright WHKX 2012-08 504 200 120 V AC/60 Hz Power source Emtest 2012-04 900 681 Netwave Multimeter Fluke 85 III 625 2012-05 503 418 Temperature and humidity meter Testo 625 2012-05 504 117 Operational test mode The following were set in the s/w RF test software, if not otherwise stated. Rate: 6 Mbit/s (the rate with the highest output power, see Appendix 2) Tx gain (output power): MAX Idle time: 0 Number of frames: INF (continuous transmission) Frame length: 1536 (default=1024) Tx generate pattern: PRBS9 (9-bits Pseudo Random Bit Sequence) For duty cycle measurements see appendix 2. With the setting above the duty cycle was measured to 2.11/2.26 ms = 0.934 = 93.4%. The PRF was calculated to PRF = 1/T = 1/2.26 ms = 442 Hz, broad band, ”pulse spectrum”, RBW>PRF=1/T. 1/ τ = 1/2.11ms = 473 Hz, 1/τ<RBW. Cabling during emission test: EUT port Cable type Termination / use USB Multi-wire, shielded, 5.0 m Connected to the PC laptop length SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 3 (3) FCC ID: X2OSPB800 and Appendix 1 IC: 8713A-SPB800 Uncertainties Measurement and test instrument uncertainties are described in the quality assurance documentation ”SP QD 10885”. The measurement uncertainties can be found in the table below. The uncertainties are calculated with a coverage factor k=2 (95% level of confidence). The measurement uncertainties can be found in the table below: Method Uncertainty Radiated emission, 30 – 1000 MHz 4.8/5.6 dB (V/H-pol) Radiated emission, 1 – 40 GHz 2.6 dB Conducted AC emission 3.5 dB Compliancy evaluation is based on a shared risk principle with respect to the measurement uncertainty. Reservation The test results in this report apply only to the particular test object as declared in the report. Delivery of test object The test objects were delivered on the 2011-07-16 and 2011-08-09. Test engineers Fredrik Isaksson, SP Azhar Abbas, SP SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 1 (3) FCC ID: X2OSPB800 and Appendix 2 IC: 8713A-SPB800 Maximum peak conducted output power measurements according to FCC 47 CFR part 15.247 (b) (3)/ RSS-210 A8.4(4) Date Temperature Humidity 2011-08-08 22 °C ± 3 °C 55 % ± 5 % 2011-08-12 21 °C ± 3 °C 49 % ± 5 % Test set-up and procedure The measurements were performed according to ANSI C63.10-2009. Conducted measurements were performed at the antenna connector and with continuous transmission and with modulation. Measurement equipment SP number Test site Edison - Boonton RF Peak power meter 4500A 503 144 Boonton Peak power sensor 56518-S/4 503 145 120 V AC/60 Hz Power source Emtest 900 681 Netwave DC power supply Agilent E3631A 503 997 Multimeter Fluke 85 III 503 418 Temperature and humidity meter Testo 625 504 117 Measurement uncertainty: 0.7 dB SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 2 (3) FCC ID: X2OSPB800 and Appendix 2 IC: 8713A-SPB800 Results Duty cycle measurements can be found in the diagrams below: Diagram 1: 2442 MHz, Tx on, 6 Mbit/s, Frame length=1536 (-> duty cycle 93.4 %) Diagram 2: 2442 MHz, Period time, 6 Mbit/s, Frame length=1536 (-> duty cycle 93.4 %) Preliminary test, 2442 MHz, conducted output power vs. data rates (modulation). The Frame length was 1024 byte (-> duty cycle 76.9 % for 6 Mbit/s) during this test: Data rate (modulation) Peak detector, dBm DPSK, 1 Mbit/s 17.5 QDPSK, 2 Mbit/s 17.4 CCK/DPSK, 5.5 Mbits/s 17.4 OFDM, 6 Mbits/s 19.9 OFDM, 9 Mbit/s 19.9 OFDM, 12 Mbit/s 19.8 OFDM, 18 Mbit/s 19.6 OFDM, 24 Mbit/s 19.9 OFDM, 36 Mbit/s 19.8 OFDM, 48 Mbit/s 19.8 OFDM, 54 Mbit/s 19.9 Final test, 6 Mbit/s, Frame length=1536 Max peak output power Peak/Average (dBm) 2412 MHz 2442 MHz 2462 MHz Tnom 21°C Vnom 3.300 V DC 20.7/13.5 19.8/12.7 19.2/12.4 Vmin 2.805 V DC Tnom 23°C 18.7/11.2 17.7/10.5 17.3/10.4 Note 1 Vmax 3.795 V DC Tnom 21°C 21.1/11.7 20.1/11.1 19.7/11.0 Note 1 Note 1: According 47CFR 15.31(e), For intentional radiators, measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115% of the nominal rated supply voltage. Limits According to 47CFR 15.247(b)(3) and RSS-210 A8.4(4), for systems using digital modulation in the 2400-2483.5 MHz band: 1 Watt (30 dBm). Complies? Yes SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 3 (3) FCC ID: X2OSPB800 and Appendix 2 IC: 8713A-SPB800 Diagram 1 Marker 1 [T1] RBW 10 MHz RF Att 30 dB Ref Lvl 13.91 dBm VBW 10 MHz 30 dBm -49.100200 æs SWT 5 ms Unit dBm 30 30 dB Offset 1 [T1] 13.91 dBm A -49.100200 æs 20 2 [T1] 14.04 dBm 1 1 2 2.065130 ms 10 1 [T1] 0.13 dB TRG 2.114230 ms 0 IN1 1VIEW 1MA -10 -20 -30 -40 -50 -60 TR -70 Center 2.412 GHz 500 æs/ Date: 8.AUG.2011 11:12:58 Diagram 2 Marker 1 [T1] RBW 10 MHz RF Att 30 dB Ref Lvl 13.91 dBm VBW 10 MHz 30 dBm -49.100200 æs SWT 5 ms Unit dBm 30 30 dB Offset 1 [T1] 13.91 dBm A -49.100200 æs 20 2 [T1] 13.78 dBm 1 1 2 2.215431 ms 10 1 [T1] -0.13 dB TRG 2.264531 ms 0 IN1 1VIEW 1MA -10 -20 -30 -40 -50 -60 TR -70 Center 2.412 GHz 500 æs/ Date: 8.AUG.2011 11:14:11 SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 1 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 20 dBc below fundamental and restricted bands of operation measurements according to FCC 47 CFR part 15.247 (d) / RSS 210-210 A8.5 Date Temperature Humidity 2011-08-08 22 °C ± 3 °C 55 % ± 5 % 2011-08-09 22 °C ± 3 °C 54 % ± 5 % 2011-08-10 23 °C ± 3 °C 50 % ± 5 % 2011-08-11 21 °C ± 3 °C 50 % ± 5 % Test set-up and procedure The measurements were performed according to ANSI C63.10-2009. The test was performed with continuous transmission (93.4 % duty cycle) and with normal modulation. The test of radiated emission was performed in a semi anechoic chamber. The measurements were performed with both horizontal and vertical polarizations of the antenna. The antenna distance was 3.0 m during frequencies below 18 GHz and 1.0 m during frequencies above 18 GHz. The measurement procedure is as follows: 1. A pre-measurement is performed with peak detector. The test object is measured in eight directions with the antenna at three heights, 1.0 m, 1.5 m and 2.0 m. 2. If the emission is close or above the limit during the pre-measurement, the test object is scanned 360 degrees and the antenna height scanned from 1 to 4 m for maximum response. Then the emission is measured with the quasi-peak detector on frequencies below 1 GHz and with the average detector above 1 GHz. The measurement was first performed with peak detector. The following RBW were used: 30 MHz-1 GHz: RBW=120 kHz 1-25 GHz: RBW=1 MHz Test set-up photos during the tests can be found in Appendix 5. SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 2 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 Measurement equipment SP number Semi anechoic chamber, Edison 504 114 Spectrum analyzer R&S ESI 26 503 885 EMI measurement computer - Software: R&S EMC32, ver. 8.51.0 503 745 Antenna Schaffner Bilog CBL6143 504 079 Horn antenna EMCO 3115 501 548 Standard gain horn Flann 16240-25 503 939 Standard gain horn Flann 18240-25 503 900 Standard gain horn Flann 20240-20 503 674 Low Noise Amplifier Miteq 503 277 Low Noise Amplifier Miteq 504 160 Preamplifier Miteq, 1 18 GHz 504 160 High pass filter Wainwright WHKX 504 120 120 V AC/60 Hz Power source Emtest 900 681 Netwave Temperature and humidity meter Testo 625 504 117 Results The pre-measurement emission spectra for the worst case configuration can be found in the diagrams below: Diagram 1: Ambient, 30-1000 MHz vertical and horizontal polarization Diagram 2: Ambient, 1-8.2 GHz vertical and horizontal polarization Diagram 3: 30-1000 MHz, 2442 MHz, vertical and horizontal polarization Diagram 4: 1-3 GHz, 2412 MHz, vertical and horizontal polarization Diagram 5: 3-8.2 GHz, 2442 MHz, vertical and horizontal polarization Diagram 6: 8.2-12 GHz, 2442 MHz, vertical and horizontal polarization Diagram 7: 12-18 GHz, 2442 MHz, vertical and horizontal polarization Diagram 8: 18-25 GHz, 2442 MHz, vertical polarization Diagram 9: 18-25 GHz, 2462 MHz, horizontal polarization SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 3 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 The highest detected levels during the final measurement in the frequency range 30 MHz-25 GHz are listed in the tables below. 2412 MHz Frequency QP level AV level Peak level Corr Limit Height Azimuth Polarization (MHz) (dBµV/m) (dBµV/m) (dBµV/m) (dB) (dBµV/m) (m) (deg) 2406.763 N/A 82.1 93.1 *) 31.8 Carrier 3.06 225 Horizontal 4826.082 N/A 38.7 53.4 -10.1 54 (Av) 1.08 174 Vertical 62.8 9648.000 N/A 40.7 44.9 -15.7 1.05 243 Horizontal (20 dBc) 64 (Av) 19295.766 N/A 52.6 57.1 3.1 1.00 259 Vertical **) *) With RBW 100 kHz the peak level was 82.8 dBµV/m. **) The tests in the frequency range 18-25 GHz was performed at 1.0 m antenna distance. 2442 MHz Frequency QP level AV level Peak level Corr Limit Height Azimuth Polarization (MHz) (dBµV/m) (dBµV/m) (dBµV/m) (dB) (dBµV/m) (m) (deg) 42.496 27.6 N/A - 16.7 20 dBc 1.00 56 Vertical 73.265 23.6 N/A - 7.9 40 (QP) 1.37 0 Vertical 112.630 17.9 N/A - 12.2 43.5 (QP) 1.32 0 Vertical 13.524 19.4 N/A - 12.9 43.5 (QP) 1.00 151 Vertical 2436.884 N/A 79.4 90.5 *) 31.8 Carrier 1.30 4 Vertical 4882.234 N/A 39.8 55.8 -10.1 54 (Av) 1.05 173 Vertical 7329.469 N/A 32.6 - -3.5 54 (Av) 1.55 307 Horizontal 58.6 9768.040 N/A 39.6 43.7 -15.7 1.00 248 Horizontal (20 dBc) 64 (Av) 19535.947 N/A 53.4 56.8 3.1 1.00 271 Vertical **) *) With RBW 100 kHz the peak level was 78.6 dBµV/m. **) The tests in the frequency range 18-25 GHz was performed at 1.0 m antenna distance. 2462 MHz Frequency QP level AV level Peak level Corr Limit Height Azimuth Polarization (MHz) (dBµV/m) (dBµV/m) (dBµV/m) (dB) (dBµV/m) (m) (deg) 2458.447 N/A 80.9 91.7 *) 31.9 (Carrier) 2.85 226 Horizontal 4921.974 N/A 39.5 54.5 -10.1 54 (Av) 1.00 172 Vertical 7384.980 N/A 33.5 - -3.2 54 (Av) 1.46 307 Horizontal 60.3 9848.000 N/A 40.3 45.7 -15.7 1.03 243 Horizontal (20 dBc) 64 (Av) 19696.002 N/A 54.4 57.2 3.1 1.00 224 Vertical **) *) With RBW 100 kHz the peak level was 80.3 dBµV/m. **) The tests in the frequency range 18-25 GHz was performed at 1.0 m antenna distance. SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 4 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 Limits According to 47CFR 15.247(d), in any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating , the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section15.209(a). According to 47CFR 15.249(e), the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. According to RSS-210 A8.5, in any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating , the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general field strength limits specified in RSS-Gen is not required. Complies? Yes SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 5 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 Diagram 1 70 65 60 55 FCC P15 E-Field 3 m QP class B 50 45 40 Level in dBµV/m 35 30 25 20 15 10 5 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Diagram 2 100 95 90 85 80 75 70 65 60 Level in dBµV/m 55 FCC P15 E-Field 3 m AV class B 50 45 40 35 30 25 20 15 10 5 0 1G 2G 3G 4G 5G 6 7 8.2G Frequency in Hz SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 6 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 Diagram 3 70 65 60 55 FCC P15 E-Field 3 m QP class B 50 45 40 Level in dBµV/m 35 30 25 20 15 10 5 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Diagram 4 100 95 90 85 80 75 70 Level in dBµV/m 65 60 55 FCC P15 E-Field 3 m AV class B 50 45 40 35 30 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 Frequency in MHz SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 7 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 Diagram 5 100 95 90 85 80 75 70 65 60 Level in dBµV/m 55 50 45 40 35 30 25 20 15 10 5 0 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8.2 Frequency in GHz Diagram 6 100 95 90 85 80 75 70 65 60 Level in dBµV/m 55 FCC P15 E-Field 3 m AV class B 50 45 40 35 30 25 20 15 10 5 0 8.2 8.4 8.6 8.8 9 9.2 9.4 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 11.6 11.8 12 Frequency in GHz SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 8 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 Diagram 7 100 95 90 85 80 75 70 65 60 Level in dBµV/m 55 FCC P15 E-Field 3 m AV class B 50 45 40 35 30 25 20 15 10 5 0 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 Frequency in GHz Diagram 8 Marker 1 [T1] RBW 1 MHz RF Att 10 dB Ref Lvl 58.72 dBæV VBW 1 MHz 90 dBæV 19.52905812 GHz SWT 70 ms Unit dBæV 90 4.9 dB Offset A 80 70 D1 64 dBæV 60 1 1MAX 1MA 50 40 30 20 10 0 -10 Start 18 GHz 700 MHz/ Stop 25 GHz Date: 11.AUG.2011 10:42:52 SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 9 (9) FCC ID: X2OSPB800 and Appendix 3 IC: 8713A-SPB800 Diagram 9 Marker 1 [T1] RBW 1 MHz RF Att 10 dB Ref Lvl 58.02 dBæV VBW 1 MHz 70 dBæV 19.69739479 GHz SWT 70 ms Unit dBæV 70 4.9 dB Offset A D1 64 dBæV 60 1 50 40 1MAX 1MA 30 20 10 0 -10 -20 -30 Start 18 GHz 700 MHz/ Stop 25 GHz Date: 11.AUG.2011 11:55:07 SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 1 (4) FCC ID: X2OSPB800 and Appendix 4 IC: 8713A-SPB800 Band edge measurements according to 47CFR 2.1049 / RSS-210 A8.5 Date Temperature Humidity 2011-08-10 23 °C ± 3 °C 50 % ± 5 % Test set-up and procedure The measurements were performed according to ANSI C63.10-2009. The test was performed with continuous transmission (93.4 % duty cycle) and with normal modulation. The radiated maximum peak radiated output power measurements were performed in the semi- anechoic chamber. The measurement was scanned with PEAK-detector with the antenna height 1-4 m and the turntable was varied between 0-360 degrees for maximum response, see Appendix 2. The antenna distance during the measurements was 3.0 m. Test set-up photos during the tests can be found in Appendix 5. Measurement equipment SP number Semi anechoic chamber, Edison 504 114 Spectrum analyzer R&S ESI 26 503 885 EMI measurement computer - Software: R&S EMC32, ver. 8.51.0 503 745 Horn antenna EMCO 3115 501 548 120 V AC/60 Hz Power source Emtest 900 681 Netwave Temperature and humidity meter Testo 625 504 117 Results Operation band 2400-2483.5 MHz The pre-measurement diagrams with peak detector can be found in the diagrams below Diagram 1 2412 MHz Band edge at 2400 MHz (20 dBc) Diagram 2 2412 MHz Band edge at 2390 MHz (restricted band) Diagram 3 2462 MHz Band edge at 2483.5 MHz (restricted band) SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 2 (4) FCC ID: X2OSPB800 and Appendix 4 IC: 8713A-SPB800 Final measurements: 2412 MHz Frequency AV level Peak level AV Limit Peak Limit dBc, peak det Polarization (MHz) (dBµV/m) (dBµV/m) (dBµV/m) (dBµV/m) (limit=20dBc) 2390.00 *) 36,8 55.0 54.0 74.0 N/A Horizontal 2400.00 **) N/A N/A N/A N/A 30.0 Horizontal *) Restricted band **) 20 dBc 2462 MHz Frequency AV level Peak level AV Limit Peak Limit dBc, peak det Polarization (MHz) (dBµV/m) (dBµV/m) (dBµV/m) (dBµV/m) (limit=20dBc) 2483.50 *) 38.6 60.7 54.0 74.0 N/A Horizontal *) Restricted band Limits Band edge at 2400 MHz: According to 47CFR 15.247(d), In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating , the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Band edge at 2390 and 2483.5 MHz: In addition, radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section15.209(a). According to RSS-210 A8.5, in any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating , the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general field strength limits specified in RSS-Gen is not required. Complies? Yes SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 3 (4) FCC ID: X2OSPB800 and Appendix 4 IC: 8713A-SPB800 Diagram 1 Marker 1 [T1] RBW 100 kHz RF Att 0 dB Ref Lvl 85.54 dBæV VBW 100 kHz 100 dBæV 2.40570741 GHz SWT 60 s Unit dBæV 100 31.8 dB Offset 1 [T1] 85.54 dBæV A 2.40570741 GHz 90 1 2 [T1] 55.56 dBæV 2.40000000 GHz 80 1 [T1] -29.98 dB -5.70741483 MHz 70 IN1 1MAX 1MA 60 1 2 D1 54 dBæV 50 P20 40 30 20 10 F1 0 Center 2.412 GHz 4 MHz/ Span 40 MHz Date: 10.AUG.2011 07:27:07 Diagram 2 Marker 1 [T1] RBW 1 MHz RF Att 0 dB Ref Lvl 54.51 dBæV VBW 1 MHz 100 dBæV 2.39000000 GHz SWT 60 s Unit dBæV 100 31.8 dB Offset 1 [T1] 54.51 dBæV A 2.39000000 GHz 90 2 [T1] 74.20 dBæV 2.40000000 GHz 80 2 70 IN1 1MA 60 1 D1 54 dBæV 50 P20 40 30 20 10 F2 F1 0 Start 2.38 GHz 4 MHz/ Stop 2.42 GHz Date: 10.AUG.2011 07:21:52 SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 4 (4) FCC ID: X2OSPB800 and Appendix 4 IC: 8713A-SPB800 Diagram 3 Marker 1 [T1] RBW 1 MHz RF Att 0 dB Ref Lvl 62.00 dBæV VBW 1 MHz 100.1 dBæV 2.48350000 GHz SWT 60 s Unit dBæV 100 31.9 dB Offset 1 [T1] 62.00 dBæV A 2.48350000 GHz 90 80 70 IN1 1MA 1 60 D1 54.1 dBæV 50 P20 40 30 20 10 F1 0.1 Start 2.46 GHz 3 MHz/ Stop 2.49 GHz Date: 10.AUG.2011 12:42:54 SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 1 (7) FCC ID: X2OSPB800 and Appendix 5 IC: 8713A-SPB800 Photos The test set-up during all the radiated tests can be seen in the pictures below. 1-18 GHz 18-25 GHz SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 2 (7) FCC ID: X2OSPB800 and Appendix 5 IC: 8713A-SPB800 Close up, EUT and cables SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 3 (7) FCC ID: X2OSPB800 and Appendix 5 IC: 8713A-SPB800 SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 4 (7) FCC ID: X2OSPB800 and Appendix 5 IC: 8713A-SPB800 EUT:s Unit for radiated tests Top Rear SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 5 (7) FCC ID: X2OSPB800 and Appendix 5 IC: 8713A-SPB800 Side SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 6 (7) FCC ID: X2OSPB800 and Appendix 5 IC: 8713A-SPB800 Unit for conducted tests Top, overview Top SP Technical Research Institute of Sweden

Date Reference Page REPORT 2011-08-10 FX112895-F15C 7 (7) FCC ID: X2OSPB800 and Appendix 5 IC: 8713A-SPB800 Rear Side SP Technical Research Institute of Sweden


Document Created: 2019-09-14 18:51:03
Document Modified: 2019-09-14 18:51:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC