RF Exposure Report (BLE)

FCC ID: XN6-SR7250

RF Exposure Info

Download: PDF
FCCID_2315823

FCC ID: XN6-SR7250 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Zylux Acoustic Corporation. HP Roar Wireless Speaker Model Number: HP SR7250 FCC ID: XN6-SR7250 Prepared for : Zylux Acoustic Corporation. 3F, 22Lane 35, Jihu Road, Neihu Technology Park, Taipei, 114 Taiwan Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1406009 Date of Test : May 16 ~ June 02, 2014 Date of Report : June 14, 2014

FCC ID: 1. EXPOSURE EVALUATION OF PORTABLE OR MOBILE DEVICES Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. 2．SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and ≤50mm The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

FCC ID: 3. EVALUATION RESULTS Maximum measured transmitter power. Peak output Power Peak output Power Mode CH Results （dBm） （mW） 2402 2.08 1.614 0.500 GFSK 2440 2.39 1.734 0.542 2480 2.39 1.734 0.546 [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0 SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required. ====END====


Document Created: 2014-06-30 16:57:16
Document Modified: 2014-06-30 16:57:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC