User manual

FCC ID: XN6-SB3621F6

Users Manual

Download: PDF
FCCID_3749251

QUICK START GUIDE
             Model: SB362An-F6
                             VIZIO Sound Bar
Please read this guide before using the product.


   IMPORTANT SAFETY INSTRUCTIONS
     Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit
     from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions
     before operating your Unit. Keep these instructions in a safe place for future reference.
     • Read these instructions.
     • Keep these instructions.
     • Heed all warnings.
     • Follow all instructions.
     • Do not use this apparatus near water.
     • Clean only with a dry cloth.
     • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
     • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
     • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
        grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
        plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
     • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the
        apparatus.
     • Only use attachments/accessories specified by the manufacturer.
     • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use 	
  
        caution when moving the cart/apparatus combination to avoid injury from tip-over.
     • Unplug this apparatus during lightning storms or when unused for long periods of time.
     • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when
        the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
        exposed to rain or moisture, does not operate normally, or has been dropped.
     • To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit.
     • Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not
        use abrasive cleaners.
     • Always use the accessories recommended by the manufacturer to insure compatibility.
     • When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before
        turning on your Unit to avoid causing fire, electric shock, or component damage.
     • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it
        from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is
        provided.
     • Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short
        circuit parts causing a fire or electric shock. Never spill liquids on your Unit.
     • Never use the subwoofer in the upright, vertical position without installing the legs
     • Do not block the subwoofer ports. Allow for 1-2 inches of space around all sides for ventilation.
     • WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued
English - ii


    exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable
    discomfort.
•   When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord.
•   Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•   The wall socket should be located near your Unit and be easily accessible
•   Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and
    contact your dealer. Continuous use in this case may result in fire or electric shock.
•   Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer
    immediately. Do not try to repair your unit yourself.
•   Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally.
    Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock.
•   Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may
    cause fire or electric shock.
•   Ensure that the power cord and any other cables are unplugged before moving your Unit.
•   When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or
    electric shock. When your Unit will not be used for an extended period of time, unplug the power cord.
•   To reduce risk of electric shock, do not touch the connector with wet hands.
•   Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote
    control or injure the operator.
•   See the important note and rating located on the back of the unit.
•   WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment
    (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.
•   CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.
•   Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or
    dispose of it in fire.
•   Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
•   No naked flame sources, such as lighted candles, should be placed on the apparatus.
•   The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc.
•   The equipment shall be used at maximum of 35 degrees °C ambient temperature.
                                WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
                                                                                   CAUTION
                                                                                 RISK OF ELECTRIC
                                                                               SHOCK DO NOT OPEN




              The lighting flash with arrowhead symbol
                                                                     The exclamation point within an equilateral           Warning: This equipment is a Class II or
              within an equilateral triangle is intended
                                                                     triangle is intended to alert the user to             double insulated electrical appliance. It has
              to alert the user to the presence of not
                                                                     the presence of important operating and               been designed in such a way that it does
              isolated dangerous voltage within the
                                                                     servicing instructions in the literature              not require a safety connection to electrical
              product that may be sufficient magnitude
                                                                     accompanying the appliance.                           earth.
              to constitute a risk of shock to persons.


                                                                                                                                                                           English - iii


  TABLE OF CONTENTS
   Package contents.............................................................................................................................................5
   Controls & Connections...................................................................................................................................6
   First-Time Setup...............................................................................................................................................8
   Using the Remote.............................................................................................................................................11
   LED Indicators...................................................................................................................................................13
   Using Button Combinations............................................................................................................................15
   Bluetooth Audio Pairing...................................................................................................................................16
   Using Bluetooth mode.....................................................................................................................................17
   Advanced Setup................................................................................................................................................18
   Wall-Mounting the Sound Bar.........................................................................................................................19
   Help & Troubleshooting...................................................................................................................................23
   Limited Warranty..............................................................................................................................................24
   Legal & Compliance..........................................................................................................................................28




English - iv


PACKAGE CONTENTS                                                                                              HOME THEATER DISPLAY | QUICK START GUIDE
                                                                                                                         Installation Guide | Models:




         VIZIO                            Remote Control                                                    Power Cable
       Sound Bar                       with 2x AAA Batteries




                                                          QUICK START GUIDE
                                                                   Model: SB3621n-E8M
                                                                                      VIZIO Sound Bar




          2 x Wall
                                                         Please read this guide before using the product.




                          Wall Mount
           Mount                                    Quick Start
                           Template
          Brackets                                    Guide
        (Sound Bar)




          Stereo RCA to
                           3.5mm to 3.5mm             Digital Optical
          3.5mm Audio
                              Audio Cable                 Cable
              Cable
                                                                                                                                                         English - 5


     CONTROLS & CONNECTIONS


     Bottom of Sound Bar



                                                         USB*
                                                        USB In                             OPTICAL
                              Power Port                                           Digital Optical Audio In


                                                                       AUX
                                                                 Analog Audio In
                                                                 (Stereo 3.5mm)




  * Supports .WAV and .MP3 file format playback only.

English - 6


Front of Sound Bar




             Power Press to turn                             Left Side of
             soundbar on or off.                              Sound Bar




           Input Press to change
           the audio source.


          Bluetooth Input Hold to pair.    Volume Increase or decrease
          (See ‘Bluetooth Audio Pairing’   the loudness of the audio.
          for more information.)




                                                                            English - 7


   FIRST-TIME SETUP


        Bottom of Sound Bar




          1    CHOOSE ONE CABLE*
                 AND CONNECT
                 IT TO YOUR TV

                                                      3.5MM TO                     DIGITAL OPTICAL
                                                      RCA CABLE                    CABLE†
                                                                  OR
                                                        GOOD                         BETTER


                                                                       † When using either of the Digital
                                                                         Inputs, if there is no audio: (A) try
                                                                         setting the TV output to PCM or
        * Not all TVs have the audio outputs shown
                                                                         (B) Connect directly to your Blu-
          above. To connect the Sound Bar directly
                                                                         ray/other source, some TVs do not
          to your other devices (Blu-Ray player,
                                                                         pass through digital audio.
          game system, etc.) see your device’s user
          manual.




English - 8


2     Connect the power cable to the Sound Bar AC IN as shown. Plug the power cable into an electrical outlet.




Bottom of Sound Bar




                                                                                                         English - 9


         3                                                                               4
                Top                                                                                  Top

                      Remove the battery cover by gently                                          Insert the included batteries and gently
                       sliding it away from the remote.                                            slide the battery cover back into place.

                      When needed, VIZIO recommends replacing the batteries that came
                      with this remote with two, new Duracell ‘AAA’ alkaline batteries.




5         Turn on your TV and Sound Bar. The Sound Bar will automatically
          begin searching for an active input.*

          The LED indicators on the front of the Sound Bar will begin cycling in
          triplets through inputs until an audio source is detected.**                                          Power
                                                                                                                                              Input

                         Tip: Pressing the INPUT button will stop the auto
                         detect function.


          You can press the INPUT button to switch between audio sources.
          For example, if you connected your TV to AUX , set the Sound Bar
          to AUX .

   *Occurs only during first-time set up.
   **Auto detect function only occurs once when the Sound Bar is first powered on. To enable this feature again, you
   must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
   button for 3 seconds.
English - 10


USING THE REMOTE
                                                       Input
                                          Press to change the input source   Bluetooth
                                                                             Press to enter Bluetooth input.
                                                                             (To enter force pair mode, press and
                               Power
                                                                             hold for 3 seconds).
               Press to turn on or off.

                        Volume +/-                                           Enter/Play/Pause
    Press to increase and decrease                                           Press to select an option. Press to play
                           volume.                                           or pause.

                          Previous
                                                                             Next
  Press to return to previous track.
                                                                             Press to skip to the next track.
 (Changes audio settings in Menu)
                                                                             (Changes audio settings in Menu)
                         TruVolume
                                                                             Virtual:X
              Press to enable/disable
                                                                             Press to enable/disable Virtual:X.
                         TruVolume.
                              Bass                                           Treble
    Press to enter bass adjustment                                           Press to enter treble adjustment
                             mode.                                           mode.
                               Mute
               Press to mute/unmute                                          Equalizer
                                                                             Press to toggle between two preset
                                                                             settings, Music and Movie.
 Long press of the Mute button for 5
 seconds disables the power LED.


                                                                                                                  English - 11


               For the best surround sound experience, position the Sound Bar as shown.
               The Sound Bar should be close to ear level.




                                                          Sound Bar is
                                                       centered below
                                                               the TV.




English - 12


LED INDICATORS
The LED Indicators will behave differently with
each button on the remote control.                                                               LED Indicators are located here.



     Function                LED Behavior                                               Description

                                                         Press the Input button on the remote to cycle through the available inputs:
                              Analog Audio In - AUX        •Analog Audio In - AUX Stereo 3.5mm
                                                           •Digital Optical Audio In - Optical
                              Digital Optical Audio In
       Input                           Optical             •Bluetooth
                                                           •USB In - USB
                                    Bluetooth
                                                         Press and hold the INPUT button on the remote control for 3 seconds to
                                                         enable the auto input detect function.
                                       USB



                                                         Press and hold the     button on the remote. The Sound Bar will be
                                                         discoverable for 15 minutes. You can now search for the Sound Bar (VIZIO
    Bluetooth                                            SB362An) using your Bluetooth Device. The sound bar will power down if no
                         (When searching for device)     device is found.
      Pairing           Flash from the bottom to the
                          top and back continuously.     Note: Set your Bluetooth device into pairing mode prior to the Sound
                                                         Bar.



                                                         Press the TVOL button to enable/disable TruVolume.
  DTS TruVolume                TruVolume On
      On/Off                   TruVolume Off             When enabled (On), TruVolume provides a consistent and comfortable volume
                                                         level for a more enjoyable listening experience



                                                                                                                                       English - 13


               Function         LED Behavior                                           Description


               Equalizer        Movie                    Press the EQ button to toggle between two preset equalizer settings, Music
                                             Music
                 Mode                                    and Movie.settings, Movie, or Music. Note: Movie mode is on by default




                                                         Press the TREB button then press the Next/Previous button to increase/
                Treble
                                                         decrease the treble level. The LED indicators will move up with increasing
                Level           Three center LEDs        levels and down with decreasing levels.
                              indicate Treble level 0.


                                                         Press the BASS button then press the Next/Previous button to increase/
                 Bass                                    decrease the bass level. The LED indicators will move up with increasing
                                Three center LEDs        levels and down with decreasing levels . Decreasing the BASS level to the
                Levels                                   lowest setting will reduce BASS and Subwoofer levels on the bar. This is
                               indicate Bass level 0.
                                                         best for watching TV late at night in a quiet environment.



                                                         Press the VRT:X button to enable/disable Virtual X. When enabled (On), all
               Virtual X      Enabled                    inputs will produce a virtual sound technology that simulates the effect of
                Mode                       Disabled      having overhead sound. When disabled (Off), all sources will playback in
                                                         stereo.




                                                         Dolby Audio is only available on the Digital Optical Audio In inputs. When
       When a Dolby Audio
                                                         a Dolby Audio signal is detected, the Dolby Audio indicator LED will light up
        signal is detected.
                                     Dolby Audio         for 3 seconds before fading away.
                                    Indicator LED




English - 14


PROGRAMMING THE SOUND BAR
You can program the Sound Bar to accept TV remote IR commands.


    Function               LED Behavior                                          Description
                                                     Press and hold the Play button to put the Sound Bar into learning
                                                     mode. While the Sound Bar is in learning mode, press and hold the
Learn Volume Down                                    Volume Down button on the TV remote control while pointing the
                                                     remote at the Sound Bar. All of the LED Indicators on the Sound Bar
                                                     will flash two times, indicating that it has successfully recognized the
                           (Waiting to learn)
                                                     TV remote.
                          Flash from bottom
                            to top and back
                                                     Press the Play button to put the Sound Bar into learning mode. While
                             continuously.           the Sound Bar is in learning mode, press the Volume Up button on
  Learn Volume Up
                                                     the TV remote control while pointing the remote at the Sound Bar. All
                                                     of the LED Indicators on the Sound Bar will flash two times indicating
                                                     that it has successfully recognized the TV remote.


                        All of the LEDs will blink   Press the Play button to put the Sound Bar into learning mode. While
    Learn Mute              twice to confirm.        the Sound Bar is in learning mode, press the Mute button on the TV
                                                     remote control while pointing the remote at the Sound Bar. All of the
                                                     LED Indicators on the Sound Bar will flash two times indicating that it
                                                     has successfully recognized the TV remote.




                                                                                                                            English - 15


   USING BUTTON
   COMBINATIONS                                 Buttons are located on side of Sound Bar.


   There are 3 functions that are triggered by 3 different button combinations on the Sound Bar.
          Function        LED Behavior                                                 Description

                                                        Reset the Sound Bar to the factory default settings. To perform a Factory Reset,
               Factory                                  Press and Hold the Bluetooth( ) and Volume Down (—) buttons for
                                                        5 seconds.
                Reset
                             All 15 LEDs will
                                                        Note: This will erase all settings and preferences that you have set.
                              flash 3 times




                                                        Enable/disable the use of a VIZIO TV remote control to power on and adjust the
               VIZIO TV                                 volume of the Sound Bar. To enable/disable this function, Press and Hold the
               Remote     Enabled                       Power (    ) and Volume Up ( + ) buttons for 5 seconds.
                                     Disabled
               Control                                  Note: This function is enabled by default.




                                                        When the Energy Star setting is enabled, the Sound Bar will automatically
                                                        power down after a period of inactivity. When disabled, the Sound Bar will
                          Enabled                       remain powered on until you turn it off. To enable/disable this function, Press
         Energy Star                 Disabled
                                                        and Hold the Power (     ) and Volume Down (—) buttons for 5 seconds.

                                                        Note: Energy Star setting is enabled by default.



English - 16


BLUETOOTH AUDIO PAIRING
To pair the Sound Bar with a Bluetooth device:

1.   Press and hold the Bluetooth button       on the Sound Bar for five (5) seconds. When the Sound Bar is in
     Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light
     sequentially from bottom to top and back again.
     Once the device is paired, the LED Indicators will stop flashing.

2.   You can now search for the Sound Bar (VIZIO SB362An) using your Bluetooth device. For more
     information, refer to the user documentation that came with the device.

3.   Play audio from your Bluetooth device. Volume can be controlled on your source device and the Sound
     Bar.




         Side of Sound Bar

                                                                                            The Last Yard




                                                                                             X              Bluetooth
                                                                                                             Device




                                                                                                                        English - 17


    USING BLUETOOTH MODE
        Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth
        capability. Device compatibility will vary, see your device’s documentation for more information. Once you
        have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your
        device should remain paired. If the input is changed, the Bluetooth device will disconnect. If the source is
        changed back to Bluetooth, any paired Bluetooth device will reconnect automatically.

                                            Your Sound Bar is not equipped with a microphone,
                                            so it cannot operate as a hands-free device for a
                                            smartphone.

        Maximizing Signal
        A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format,
        so streamed music may lose some integrity when compared to a wired connection.

        Try the following if your sound quality is less than optimal:
               •   If you hear any break-up or disconnect while streaming music from your device, move the source
                   device closer to the Sound Bar.
               •   Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the
                   source device.
               •   Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless
                   video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices
                   may improve Bluetooth range.

                                            Reduce the volume levels on your device and on the
                                            Sound Bar before pressing Play. High volume levels
                                            can damage your hearing.

English - 18


ADVANCED SETUP


    Bottom of Sound Bar




                                                      GOOD                                     BETTER
                                                                   USB Thumb Drive*




*   Supports .WAV and. MP3
    file format playback only.   Tablet/MP3 Player/Laptop    Game Console             Network Media Player


                                                                                                             English - 19


   WALL-MOUNTING THE SOUND BAR

         1


               Place the included wall mounting template against the wall under your TV. Mark the two bracket holes
                          using a pencil. Ensure there is enough space between the sound bar and your TV.




               2   Install the wallmount Brackets

                   Be sure your screws are attached to wood studs, drywall
                   anchors (for drywall), or concrete anchors (for brick/concrete
                   walls).

                   Screws for attaching the brackets to the wall are not                                           *Bracket Screw
                   included. Choose the screw type and length appropriate to                                        NOT INCLUDED
                   your home’s construction. If in doubt, consult a professional                                   WITH Sound Bar
                   installer.

                                             If you are unfamiliar with power tools or the layout of electrical
                                             wiring in the walls of your home, consult a professional installer.


English - 20


                                       Wall-Mount Slots

3

    Bottom of Sound Bar




               Note: When wall mounting the bar,
               this arrow should point upwards..




Hang the Sound Bar on the wall mount
backets then slide down to lock in
place.




                                                          English - 21


  Take a moment to register your product



  VIZIO.COM/PRODUCT-REGISTRATION
    Why register?
               Customized Support
               Get assistance quickly with your information on hand.


               News and Offers
               Take advantage of the latest news and special offers from VIZIO.


               Safety and Satisfaction
               Stay up-to-date with important product updates and notifications.


English - 22


Award-Winning Customer Care At Your Convenience.


NEED HELP?
Go to: support.vizio.com
Find help with:
• New product setup
• Connecting your devices
• Technical problems
• Product updates and more

           Live chat
           support available

You can also contact our
popular support team at:

Phone:   (877) 698-4946 (toll-free)


Se habla Español • Nous parlons Français




                                                   English - 23


HELP & TROUBLESHOOTING
                          •   Press the POWER button on the remote control or on the side of your Sound Bar.
     There is no power.   •   Ensure the power cord is securely connected.
                          •   Plug a different device into the electrical outlet to verify that the outlet is working correctly.




                          •   Increase the volume. Press Volume Up on the remote control or on the side of your Sound Bar.
                          •   Press MUTE on the remote to ensure the Sound Bar is not muted.
                          •   Press INPUT on the remote or on the side of your Sound Bar to select a different input source.
                          •   When using the Digital Input, if there is no audio: (A) Try setting the TV output to PCM or (B)
                              Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
     There is no sound.
                          •   On the digital input, the input LEDs will flash rapidly if an unsupported format is present. Set the
                              source to output PCM.
                          •   Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED
                              or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
                          •   If using Bluetooth, ensure that the volume on your source device is turned up and that the device
                              is not muted.



                          •   Ensure all cables and wires are securely connected.
     I hear buzzing or    •   Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does
     humming.                 not, the problem may be with the original device.
                          •   Connect your device to a different input on the Sound Bar.



                          •   Replace the remote batteries with new ones.
     The remote           •   Point the remote directly at the center of the Sound Bar when pressing a button.
     isn’t working.       •   If using a Bluetooth connection, some of the buttons on the remote may not be supported by the
                              streaming application. (e.g., Pandora doesn’t support the Back button.)

English - 24


LIMITED WARRANTY
UNITED STATES AND CANADA
BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS
WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE
DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
This warranty contains a binding arbitration agreement and a class action waiver for United States residents. If you live in the United States, the binding arbitration
agreement and class action waiver affect your rights under this warranty. Please read the text under the section titled “Binding Arbitration Agreement; Class
Action Waiver (U.S. Residents Only)” carefully.

How Long This Warranty Lasts
For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO
warrants this product on the terms set forth below for ninety (90) days from the date of original purchase.

What This Warranty Covers
VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and manuals.
Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized
retailer in the United States (including Puerto Rico) or Canada. The product must also be located in the country where it was purchased at the time of warranty
service.

How to Get Service
Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Technical
Support via email at TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877-698-4946).

Your Obligations Before Service
You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show
that the product is within the warranty period.
When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that affords an equal degree of protection.
VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY
SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications.
Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO
recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer.

VIZIO’s Responsibilities
If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no
charge for parts or labor during the warranty period. Replacement parts may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and


                                                                                                                                                                     English - 25


   VIZIO’s labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer.

   Types of Service
   Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will
   cover return shipping to the customer.

   What This Warranty Does Not Cover
   This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues;
   (f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by
   a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”,
   “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.

   What to Do If You Are Not Satisfied With Service
   If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue
   informally and wish to file a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according
   to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim
   heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator.

   Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)
   UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING
   IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS
   WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN
   ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH
   ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the American
   Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or
   international commerce, the Federal Arbitration Act will apply.
   The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the
   American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in
   connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related
   Disputes applies, then you are entitled to recover attorneys’ fees as the arbitrator may determine.
   The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration
   will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award punitive or other damages not measured
   by the prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited
   to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the
   award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court
   having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under
   this warranty without the prior written consent of you and VIZIO.
   ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO
   PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER
   PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.

English - 26


NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR
WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.
Exceptions to Binding Arbitration Agreement and Class Action Waiver
IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty
(60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and
(3) your written notification must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out
of the binding arbitration agreement and class action waiver.
In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the
provisions of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.

Exclusions and Limitations
TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS
OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE,
ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE
OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

How the Law Applies
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to
the greatest extent permitted by applicable law.

General
No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will
be severed from this warranty and all other terms will remain in effect. If the class action waiver is found to be unenforceable, then the entire section titled “Binding
Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the maximum extent not prohibited by law.

Changes to Warranty
This warranty may change without notice, but any change will not affect your original warranty. Check www.vizio.com for the most current version.




                                                                                                                                                                   English - 27


   Specifications

                        Sound Bar:    One 2.67" Full Range Driver for Each Channel (1 for left, 1 for right)
                           Built-in
                                      One 3" Subwoofer Driver (For each built-in subwoofer)
                   Dual Subwoofer:
                           Inputs:    One 3.5mm Stereo Audio
                                      One Optical (Toslink)
                                      One USB (Supports .WAV & .MP3 format only)
                                      Bluetooth

               Sound Pressure Level   97 dB

     Frequency Response (System):     50 Hz - 20 KHz

                           Voltage:   120 VAC, 60 Hz

                      Compliances:    cTUVus / FCC Class B /
                                      ICES-003 /CEC / Energy star




English - 28


LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1.     Reorient or relocate the receiving antenna.
2.     Increase the separation between the equipment and receiver.
3.     Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.     Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice:
1.    The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equip-
      ment.
2.    Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3.    The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the
      user to correct such interference.

RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation
exposure limits set forth for an uncontrolled environment.

IC Statement
1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
            (1)this device may not cause interference, and
            (2)this device must accept any interference, including interference that may cause undesired
               operation of the device.
2.Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.


IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
                                                                                                                                                               English - 29


   Battery Disposal and Recycling
   You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/or a battery,
   it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit
   www.vizio.com/environment.

   Software Licenses
   All software is provided subject to software license agreements and you agree that you will be bound by such license agreements in addition to other
   applicable terms of use. By using the VIZIO products, you agree to the VIZIO Terms of Service and Privacy Policy. The VIZIO Terms of Use and Privacy
   Policy may be updated from time to time and are available to view at http://www.vizio.com/ terms and http://www.vizio.com/privacy, respectively.

   Export Regulations
   Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”).
   The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received.


   Information in this Quick Start Guide is subject to change without notice. To review the most updated version of this Quick Start Guide and the associated User Manual, go to
   http://www.vizio.com.

   © 2018 VIZIO, Inc. All Right Reserved.
   Image(s) used under license from Shutterstock.com

   This Quick Start Guide may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy
   of the information provided herein. All product specifications, functionality, features, configurations, performance, design and other product information described
   herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors.

   VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.

   Sound pressure level measured using pink noise at 1 meter, c-weighted.




English - 30


The Bluetooth® word mark and Logos are registered trademark owned by Bluetooth SIG,Inc. and any use of such marks by VIZIO, Inc. is under
license. Other trademarks and trade names are those of their respective owners.



Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are registered trademarks of Dolby Laboratories.



For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, Virtual:X, and the
DTS Virtual:X logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.



This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing
the factory default settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for
ENERGY STAR rating.We want to help you save energy.




                                                                                                                                                   English - 31


© 2018 VIZIO INC. ALL RIGHTS RESERVED.
180207ET



Document Created: 2018-02-11 20:52:24
Document Modified: 2018-02-11 20:52:24

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC