User manual

FCC ID: XN6-SB3220F6

Users Manual

Download: PDF
FCCID_3749261

QUICK START GUIDE
    Model: SB3220n-F6


   IMPORTANT SAFETY INSTRUCTIONS
     Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the
     following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a
     safe place for future reference.
     •     Read these instructions.
     •     Keep these instructions.
     •     Heed all warnings.
     •     Follow all instructions.
     •     Do not use this apparatus near water.
     •     Clean only with a dry cloth.
     •     Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
     •     Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
     •     Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two
           blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
           replacement of the obsolete outlet.
     •     Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
     •     Only use attachments/accessories specified by the manufacturer.                                                                                                        	
  

     •     Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
           cart/apparatus combination to avoid injury from tip-over.
     •     Unplug this apparatus during lightning storms or when unused for long periods of time.
     •     Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is
           damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
     •     To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit.
     •     Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
     •     Always use the accessories recommended by the manufacturer to insure compatibility.
     •     When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to avoid
           causing fire, electric shock, or component damage.
     •     Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these
           openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.
     •     Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or
           electric shock. Never spill liquids on your Unit.
     •     Never use the subwoofer in the upright, vertical position without installing the legs
     •     Do not block the subwoofer ports. Allow for 1-2 inches of space around all sides for ventilation.
     •     WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may
           become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.
     •     When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord.
     •     Do not overload power strips and extension cords. Overloading can result in fire or
           electric shock.
English - ii


•   The wall socket should be located near your Unit and be easily accessible
•   Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous
    use in this case may result in fire or electric shock.
•   Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your
    unit yourself.
•   Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord
    immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock.
•   Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause fire or electric shock.
•   Ensure that the power cord and any other cables are unplugged before moving your Unit.
•   When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Unit
    will not be used for an extended period of time, unplug the power cord.
•   To reduce risk of electric shock, do not touch the connector with wet hands.
•   Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator.
•   See the important note and rating located on the back of the unit.
•   WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment (such as a vase or flower pot) or
    expose it to dripping, splashing, rain, or moisture.
•   CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.
•   Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire.
•   Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable
•   No naked flame sources,such as lighted candles,should be placed on the apparatus.
•   the ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;
•   The equipment shall be used at maximum 35 degree C ambient temperature.


                                         WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.


                                                                                         CAUTION
                                                                                       RISK OF ELECTRIC
                                                                                     SHOCK DO NOT OPEN




                The lighting flash with arrowhead symbol
                                                                             The exclamation point within an equilateral                 Warning: This equipment is a Class II or
                within an equilateral triangle is intended
                                                                             triangle is intended to alert the user to                   double insulated electrical appliance. It has
                to alert the user to the presence of not
                                                                             the presence of important operating and                     been designed in such a way that it does
                isolated dangerous voltage within the
                                                                             servicing instructions in the literature                    not require a safety connection to electrical
                product that may be sufficient magnitude
                                                                             accompanying the appliance.                                 earth.
                to constitute a risk of shock to persons.




                                                                                                                                                                                         English - iii


  TABLE OF CONTENTS
   Package contents..........................................................................................................................5
   Controls & Connections................................................................................................................6
   First-Time Setup............................................................................................................................9
   Using the Remote..........................................................................................................................12
   LED Indicators................................................................................................................................14
   Bluetooth Pairing...........................................................................................................................16
   Using Bluetooth mode..................................................................................................................17
   Advanced Setup.............................................................................................................................18
   Using Button Combinations.........................................................................................................19
   Wall-Mounting the Sound Bar......................................................................................................20
   Help & Troubleshooting................................................................................................................24
   Limited Warranty...........................................................................................................................25
   Legal & Compliance.......................................................................................................................28




English - iv


                                         Back




PACKAGE CONTENTS                         Side                                          HOME THEATER DISPLAY | QUICK START GUIDE
                                                                                                  Installation Guide | Models:




                                         Angle




                  Sound Bar                                Remote Control            Power Cable
                                                        with 2x AAA Batteries



                                                                                                                                  Front




                                                                                                                                  Top




                                                                                                                                  Back




                                                                                                                                  Side




                                                                                                                                  Angle




    2 x Wall
 Mount Brackets               Wall Mount Template                   2 x Wall
  (Sound Bar)                                                     Mount Screws      Quick Start Guide




            Stereo RCA to                        Coaxial Audio                   Digital Optical
         3.5mm Audio Cable                          Cable                            Cable

                                                                                                                                          English - 5


   CONTROLS & CONNECTIONS




              Back of Sound Bar




                                  Power Port
                                               Sub Out
                                               Subwoofer Out




English - 6


                                                                AUX
               OPTICAL                                          Analog Audio In
                                    DIGITAL
Digital Optical Audio In                                        (Stereo 3.5mm)
                                    Coaxial In
                           USB*
                           USB In
                                                  AUX
                                             Analog Audio In
                                              (Stereo RCA)




                                                         * Supports .WAV file format playback only.
                                                                                              English - 7


  Top of Sound Barr

                                                                 Angle




                Power Press to turn
                soundbar on or off.



                      Input Press to change
                      the audio source.
                                               Volume Increase or decrease
              Bluetooth Input Hold to pair.    the loudness of the audio.
              (See ‘Bluetooth Audio Pairing’
              for more information.)




English - 8


                                                                                                                                                  Top

 FIRST-TIME SETUP
                                                           Back of Sound Bar

                                                                                                                                                  Bac




1
CHOOSE ONE CABLE*                                                                                                                                 Sid

       AND CONNECT
       IT TO YOUR TV
                                                         OR                         OR


                                              DIGITAL COAXIAL     DIGITAL OPTICAL                      3.5MM TO
                                              CABLE†              CABLE†                               RCA CABLE

                                               BETTER              BETTER                                 GOOD
                                                                                                                                                  Ang




* Not all TVs have the audio outputs shown                                               † When using either of the Digital Inputs,
  above. To connect the Sound Bar directly                                                 if there is no audio: (A) try setting the TV
  to your other devices (Blu-Ray player,                                                   output to PCM or (B) Connect directly to
  game system, etc.) see your device’s user                                                your Blu-ray/other source, some TVs do
  manual.                                                                                  not pass through digital audio.
                                                                                                                                    English - 9


                                                                 Fro



        2
               Connect the power cable to the sound bar AC
               IN as shown.

               Plug the power cable into an electrical outlet.
                                                                 Top




                                                                 Bac




                                                                 Sid




                                                                 An




English - 10


    3                                                                                  4
             Top                                                                                    Top

                   Remove the battery cover by gently                                           Insert the included batteries and gently
                     sliding it away from the remote.                                            slide the battery cover back into place.

                   When needed, VIZIO recommends replacing the batteries that came
                   with this remote with two, new Duracell ‘AAA’ alkaline batteries.




5   Turn on your TV and sound bar. The sound bar will automatically
    begin searching for an active input.*

    The LED indicators on the front of the sound bar will begin cycling in
    pairs through inputs until an audio source is detected.**
                                                                                                               Power                        Input
                       Tip: Pressing the INPUT button will stop
                             the auto detect function.


    You can press the INPUT button to switch between audio sources.
    For example, if you connected your TV to AUX , set the sound bar
    to AUX .
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must
do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
                                                                                                                                            English - 11


   USING THE REMOTE
                                                                 Input
                                                    Press to change the input source
                                                                                       Bluetooth
                                                                                       Switches to bluetooth mode. Long
                                         Power                                         press puts sound bar in bluetooth
                         Press to turn on or off.                                      pairing mode.
                                    Volume +/-                                         Enter/Play/Pause
                Press to increase and decrease                                         Press to select an option.
                                       volume.                                         Press to play or pause.

                                       Previous                                        Next
               Press to return to previous track.                                      Press to skip to the next track.
                                                                                       Mute
                                                                                       Press to mute/unmute.
                                  TruVolume                                            Virtual X
                  Turns TruVolume On and Off.                                          Turns Virtual X On and Off.

                                                                                       Treble
                                         Bass
                                                                                       Press the Previous/Next
                    Press the Previous/Next
                                                                                       button to increase/decrease
                button to increase/decrease
                                                                                       the level of the Treble.
                       the level of the bass.
                                                                                       Equalizer
                                                                                       Press the Up/Down button
                                                                                       to toggle between two preset
                                                                                       settings, Music and Movie


English - 12


For the best surround sound experience, position the Sound Bar as shown.
The Sound Bar should be close to ear level.




                                        Sound Bar is centered
                                               below the TV.




                                                                           English - 13


   LED INDICATORS
   The LED Indicators will behave differently with each button on the remote control.

                                                                                                                                                                                                   LED Indicators are located here.

         Function                                           LED Behavior                                                                                                                              Description
                                                                                                                                                                     Press the INPUT button on the remote to cycle through the available inputs:
                        Analog Audio In - AUX (1)                                                                                                                      •Analog Audio In - AUX Stereo RCA (1)

                                                    Analog Audio In - AUX (2)




                                                                                                           Digital Optical Audio In
                                                                                Coaxial In - Digital (3)
                                                                                                                                                                       •Analog Audio In - AUX Stereo 3.5mm (2)




                                                                                                                                                  USB In - USB (6)
                                                                                                                                                                       •Coaxial In - Digital (3)



                                                                                                                  Optical (4)

                                                                                                                                      Bluetooth
               Input                                                                                                                                                   •Digital Optical Audio In - Optical (4)
                                                                                                                                                                       •Bluetooth
                                                                                                                                                                       •USB In - USB (6)
                                                                                                                                                                     Press and hold the INPUT button on the remote control for 3 seconds to
                                                                                                                                                                     enable the auto input detect function.



                                                                                                                                                                     Press and hold the button on the remote. The Sound Bar will be
                                                     (When searching for device)                                                                                     discoverable for 15 minutes. You can now search for the Sound Bar (VIZIO
        Bluetooth                                                                                                                                                    SB3220n) using your Bluetooth Device. The sound bar will power down if
                                                    Flash from the bottom to the
           Pairing                                    top and back continuously.                                                                                     no device is found.

                                                                                                                                                                     Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.



                                                              TruVolume On
          DTS                                                                                                                                                        Press the TVOL button to enable/disable TruVolume.
       TruVolume                                                                                                                                                     When enabled (On), TruVolume provides a consistent and comfortable
         On/Off                                               TruVolume Off                                                                                          volume level for a more enjoyable listening experience.



English - 14


  Function             LED Behavior                                         Description


     DTS                TruSurround On         Press the TSHD button to enable/disable DTS TruSurround. When
 TruSurround                                   enabled (On), all inputs will produce virtual surround sound. When
    On/Off                                     disabled (Off), all sources will playback in stereo.
                       TruSurround Off



                                               Press the EQ button to toggle between two preset equalizer
                             Movie             settings, Music and Movie.
Equalizer Mode

                             Music             Note: Movie mode is on by default.




    Treble                                     Press the TREBLE button then press the Next/Previous button to
                    Two center LEDs indicate
                                               increase/decrease the treble level. The LED indicators will move to the
    Levels               Treble level 0.       top with increasing levels and to the bottom with decreasing levels.




                                               Press the BASS button then press the Next/Previous button to
     Bass           Two center LEDs indicate
                                               increase/decrease the bass level. The LED indicators will move to the
    Levels                Bass level 0.        top with increasing levels and to the bottom with decreasing levels.




When a Dolby               Dolby Digital       Dolby Digital is only available on either the Coaxial In or Digital Optical
Digital signal is                              Audio In inputs. When a Dolby Digital signal is detected, the Dolby Digi-
                          Indicator LED
   detected.                                   tal indicator LED will light up for 3 seconds before fading away.



                                                                                                                         English - 15


   BLUETOOTH PAIRING                                                                                                  Angle




        To pair the sound bar with a Bluetooth device:

        1.     Press and hold the Bluetooth button         on the sound bar
               for five (5) seconds or select the BT Pair option from the
               display remote menu. When the sound bar is in Bluetooth
               Pairing Mode, the LED Indicators on the Display Panel
               on the front of the Sound Bar will light sequentially from
               bottom to top and back again.

               Once the device is paired, the LED Indicators will stop flashing.
                                                                                                   Top of Sound Bar
        2.     You can now search for the sound bar (VIZIO SB3220n)
               using your Bluetooth device. For more information, refer to
               the user documentation that came with the device.

        3.     Play audio from your Bluetooth device. Volume can be
               controlled on your source device and the sound bar.

                                                                                   The Last Yard




                                                                                    X
                                                                                                         Bluetooth
                                                                                                          Device




English - 16


USING BLUETOOTH MODE
Your sound bar supports music streaming from smartphones, tablets, and computers with Bluetooth
capability. Device compatibility will vary, see your device’s documentation for more information. Once you
have paired your source device to the sound bar, as long as you stay within range of the sound bar, your
device should remain paired. If the input is changed, the Bluetooth device will disconnect. If the source is
changed back to Bluetooth, any paired Bluetooth device will reconnect automatically.

                                   Your sound bar is not equipped with a microphone,
                                   so it cannot operate as a hands-free device for a
                                   smartphone.

Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so
streamed music may lose some integrity when compared to a wired connection.

Try the following if your sound quality is less than optimal:
    •    If you hear any break-up or disconnect while streaming music from your device, move the source
         device closer to the sound bar.
    •    Be sure that there are no solid obstructions in the line-of-sight between the sound bar and the
         source device.
    •    Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video
         baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may
         improve Bluetooth range.

                                   Reduce the volume levels on your device and on the
                                   sound bar before pressing Play. High volume levels
                                   can damage your hearing.

                                                                                                           English - 17


   ADVANCED SETUP

       Back of Sound Bar




                                           DIGITAL                      DIGITAL                     RCA TO              3.5MM TO
                                        OPTICAL CABLE                COAXIAL CABLE               3.5MM CABLE           RACE CABLE
               USB Thumb Drive*




     *     Supports .WAV and .MP3
           file format playback only.     Tablet/MP3 Player/Laptop        Network Media Player          Game Console

English - 18


USING BUTTON COMBINATIONS
                               Buttons are located here.                                                                      Front




There are 3 functions that are triggered by 3 different button combinations on the Sound Bar.                                 Top



  Function           LED Behavior                                         Description
                                                                                                                              Back



                                                Reset the Sound Bar to the factory default settings. To
                                                perform a Factory Reset, Press and Hold the Bluetooth(          ) and         Side



   Factory             All 12 LEDs will         Volume Down (—) buttons for
    Reset               flash 3 times           5 seconds.

                                                Note: This will erase all settings and preferences that you have set.
                                                                                                                              Angle




                                                Enable/disable the use of a VIZIO TV remote control to power
   VIZIO TV              VIZIO TV               on and adjust the volume of the sound bar. To enable/disable
                      Remote Enabled            this function, Press and Hold the Power ( ) and Volume Up ( + )
   Remote
                         VIZIO TV               buttons for 5 seconds.
   Control            Remote Disable
                                                Note: This function is enabled by default.


                                                When the Energy Star setting is enabled, the sound bar will
                                                automatically power down after a period of inactivity. When
                        Energy Star             disabled, the sound bar will remain powered on until you turn
  Energy Star            Enabled                it off. To enable/disable this function, Press and Hold the
                        Energy Star             Power (      ) and Volume Down (—) buttons for 5 seconds.
                         Disabled
                                                Note: Energy Star setting is enabled by default.

                                                                                                                    English - 19


                                                                                                            Front



   WALL-MOUNTING THE SOUND BAR

        1
                                                 Wall-Mount Screw Holes                                     Top




                                                                                                            Back
                                                     Back of Sound Bar


                                                                                                            Side

                        Insert the two wall-mount screws into the wall-mount screw holes, and then
                                          tighten them with a Phillips screwdriver.




               2                                                                                            Angle




                   Place the included wall mounting template against the wall under your TV. Mark the two
                                                bracket holes using a pencil.
English - 20


                  poT




    Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for
    brick/concrete
             kcaB  walls).

3   Screws for attaching the brackets to the wall are not included. Choose the screw type and length
    appropriate  to your home’s construction. If in doubt, consult a professional installer.
            ediS




          elgnA




         If you are unfamiliar with power tools or the
         layout of electrical wiring in the walls of your
         home, consult a professional installer.
                                                                                                       Wall Mount Screw
                                                                                                          Screw Size: M4 x 10




             * Do not use any of the included screws for the wall mount installation. These are not intended for mounting.
                                                                                                                                English - 21


  Take a moment to register your product



  VIZIO.COM/PRODUCT-REGISTRATION
    Why register?
               Customized Support
               Get assistance quickly with your information on hand.


               News and Offers
               Take advantage of the latest news and special offers from VIZIO.


               Safety and Satisfaction
               Stay up-to-date with important product updates and notifications.


English - 22


Award-Winning Customer Care At Your Convenience.


NEED HELP?
Go to: support.vizio.com
Find help with:
• New product setup
• Connecting your devices
• Technical problems
• Product updates and more

           Live chat
           support available

You can also contact our
popular support team at:

Phone:   (877) 698-4946 (toll-free)

Se habla Español • Nous parlons Français




                                                   English - 23


HELP & TROUBLESHOOTING
                          •   Press the POWER button on the remote control or on the top of your Sound Bar.
     There is no power.   •   Ensure the power cord is securely connected.
                          •   Plug a different device into the electrical outlet to verify that the outlet is working correctly.




                          •   Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
                          •   Press MUTE on the remote to ensure the Sound Bar is not muted.
                          •   Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
                          •   When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM
                              or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
     There is no sound.
                          •   On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the
                              source to output PCM.
                          •   Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED
                              or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
                          •   If using Bluetooth, ensure that the volume on your source device is turned up and that the device
                              is not muted.



                          •   Ensure all cables and wires are securely connected.
     I hear buzzing or    •   Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does
     humming.                 not, the problem may be with the original device.
                          •   Connect your device to a different input on the Sound Bar.



                          •   Replace the remote batteries with new ones.
     The remote           •   Point the remote directly at the center of the Sound Bar when pressing a button.
     isn’t working.       •   If using a Bluetooth connection, some of the buttons on the remote may not be supported by the
                              streaming application. (e.g., Pandora doesn’t support the Back button.)

English - 24


LIMITED WARRANTY                                                                         center. You may be required to supply a purchase receipt (or copy) to show that the
                                                                                         product is within the warranty period.
                                                                                         When you return a product to a VIZIO service center, you must ship the product in its
United States and Canada                                                                 original packaging or in packaging that affords an equal degree of protection. VIZIO
BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS                       Technical Support will provide instructions for packing and shipping the product to
OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS                      the VIZIO service center.
WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY,                   ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL
DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF                 BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY
PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU                    SERVICE. If this occurs, your product will be restored to its original state. You will
PURCHASED IT.                                                                            be responsible for restoring all applicable user data and downloaded applications.
This warranty contains a binding arbitration agreement and a class action                Recovery and reinstallation of user data and downloaded applications is not
waiver for United States residents. If you live in the United States, the binding        covered under this warranty. In order to protect your personal information, VIZIO
arbitration agreement and class action waiver affect your rights under this              recommends that you always clear all personal information from the product before
warranty. Please read the text under the section titled “Binding Arbitration             it is serviced, regardless of the servicer.
Agreement; Class Action Waiver (U.S. Residents Only)” carefully.
                                                                                         VIZIO’s Responsibilities
How Long This Warranty Lasts                                                             If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option)
For non-commercial use, VIZIO warrants the product on the terms set forth below for      repair or replace it, or refund the purchase price to you. There will be no charge
one (1) year from the date of original purchase. For commercial use, VIZIO warrants      for parts or labor during the warranty period. Replacement parts may be new or
this product on the terms set forth below for ninety (90) days from the date of          recertified at VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor
original purchase.                                                                       are warranted for the remaining portion of the original warranty or for ninety (90)
                                                                                         days from warranty service, whichever is longer.
What This Warranty Covers
VIZIO warrants the product against defects in materials and workmanship when the         Types of Service
product is used normally in accordance with VIZIO’s user guides and manuals.             Displays that are 30 inches or larger will usually be repaired in-home. If in-home
Except where restricted by law, this warranty applies only to the original purchaser     repair is not available, VIZIO will provide other service options. Displays that are 40
of a new product. The purchase must have been made from an authorized retailer           inches or larger may be eligible for in-home replacement if in-home repair is not
in the United States (including Puerto Rico) or Canada. The product must also be         available.
located in the country where it was purchased at the time of warranty service.           Both in-home repair and in-home replacement require complete and easy access
                                                                                         to the product and neither includes de-installation or re-installation of the product.
Zero Bright Pixel Defect Guarantee (Displays Only)                                       In-home repair and in-home replacement are subject to availability.
Your product may qualify for a warranty against “zero bright pixel” defects for the      All other VIZIO products must be sent to a VIZIO service center to obtain warranty
duration of the warranty on select new product purchases. To determine if this           service. VIZIO is not responsible for transportation costs to the service center, but
guarantee applies to your product, refer to the model’s product information page at      VIZIO will cover return shipping to the customer.
www.vizio.com, look for the “zero bright pixel” guarantee on the box, or contact VIZIO
Technical Support at the email address or telephone number below.                        What This Warranty Does Not Cover
                                                                                         This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c)
How to Get Service                                                                       improper operation; (d) improper voltage supply or power surges; (e) signal issues;
Before obtaining warranty service, you may visit www.vizio.com for additional help       (f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or
and troubleshooting. To obtain warranty service, contact VIZIO Technical Support via     adjustments; (i) installation, set-up, or repairs attempted by anyone other than by
email at TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877-698-4946).              a VIZIO authorized service center; (j) products with unreadable or removed serial
                                                                                         numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”,
Your Obligations Before Service                                                          “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
You must obtain pre-authorization before sending your product to a VIZIO service

                                                                                                                                                                            English - 25


                                                                                              arbitrator may disclose the existence, content, or results of any arbitration under this
   What to Do If You Are Not Satisfied With Service                                           warranty without the prior written consent of you and VIZIO.
   If you feel VIZIO has not met its obligations under this warranty, you may attempt         ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE
   to resolve the issue informally with VIZIO. If you are unable to resolve the issue         CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT
   informally and wish to file a formal claim against VIZIO, and if you are a resident of     NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE
   the United States, you must submit your claim to binding arbitration according to          ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN
   the procedures described below, unless an exception applies. Submitting a claim to         ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A
   binding arbitration means that you do not have the right to have your claim heard by       REPRESENTATIVE CAPACITY.
   a judge or jury. Instead your claim will be heard by a neutral arbitrator.                 NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED
                                                                                              WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN
   Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)                   CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.
   UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR
   HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING                       Exceptions to Binding Arbitration Agreement and Class Action Waiver
   IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM                       IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION
   ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY,                    AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in
   OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED                     writing within sixty (60) days of the date that you purchased the product; (2) your
   BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION                            written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal
   ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE                          Department; and (3) your written notification must include (a) your name, (b) your
   AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL                        address, (c) the date you purchased the product, and (d) a clear statement that you
   ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RE-                        wish to opt out of the binding arbitration agreement and class action waiver.
   LATED DISPUTES. You may learn more about the American Arbitration Association              In addition, you may pursue a claim in small claims court in your county of residence
   and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since    (if in the United States) or in Orange County, California. In such case the provisions
   this warranty concerns a transaction in interstate or international commerce, the          of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S.
   Federal Arbitration Act will apply.                                                        Residents)” will not apply.
   The filing fees to begin and carry out arbitration will be shared between you and
   VIZIO, but in no event will your fees ever exceed the amount allowable by the              Exclusions and Limitations
   American Arbitration Association, at which point VIZIO will cover all additional           TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS
   administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in     WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,
   connection with any arbitration under this warranty. If you are the prevailing party       INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
   in an arbitration to which the Supplementary Procedures for Consumer-Related               PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD
   Disputes applies, then you are entitled to recover attorneys’ fees as the arbitrator       SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS
   may determine.                                                                             ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
   The dispute will be governed by the laws of the state or territory in which you            NOT APPLY TO YOU.
   resided at the time of your purchase (if in the United States). The place of arbitration   VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
   will be Irvine, California, or your county of residence (if in the United States). The     DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT,
   arbitrator will have no authority to award punitive or other damages not measured          SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN
   by the prevailing party's actual damages, except as may be required by statute. The        ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS
   arbitrator will not award consequential damages, and any award will be limited to          OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE
   monetary damages and will include no equitable relief, injunction, or direction to         EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
   any party other than the direction to pay a monetary amount. Judgment on the               ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
   award rendered by the arbitrator will be binding and final, except for any right of        IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES
   appeal provided by the Federal Arbitration Act, and may be entered in any court            RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE,
   having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an        ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS


English - 26


ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION
AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS
                                                                                        Specifications
PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.                                      Sound Bar:    One 2.75" Full Range Driver for Each Channel (1 for left,
                                                                                                       1 for right)
How the Law Applies                                                                          Inputs:   One Stereo RCA
This warranty gives you specific legal rights, and you may also have other rights,                     One 3.5mm Stereo Audio
which vary from state to state and province to province. This warranty applies to the                  One Optical (Toslink)
greatest extent permitted by applicable law.                                                           One USB (Supports .WAV format only)
                                                                                                       Bluetooth
General
No employee or agent of VIZIO may modify this warranty. If any term of this
warranty, other than the class action waiver, is found to be unenforceable, that
term will be severed from this warranty and all other terms will remain in effect. If
the class action waiver is found to be unenforceable, then the entire section titled
“Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not
apply. This warranty applies to the maximum extent not prohibited by law.               Sound Pressure Level 100 dB
                                                                                                   (System):
Changes to Warranty                                                                      Frequency Response 70 Hz - 20 KHz
This warranty may change without notice, but any change will not affect your original              (System):
warranty. Check www.vizio.com for the most current version.
                                                                                                    Voltage: 120 VAC, 60 Hz

                                                                                               Compliances:      UL60065 ,FCC Class B, ICES-003 , Energy star




                                                                                                                                                             English - 27


   LEGAL & COMPLIANCE
   FCC Class B Radio Interference Statement
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
   designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
   frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
   there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
   reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
   following measures:
   1.       Reorient or relocate the receiving antenna.
   2.       Increase the separation between the equipment and receiver.
   3.       Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   4.       Consult the dealer or an experienced radio/TV technician for help.
   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
   and (2) this device must accept any interference received, including interference that may cause undesired operation.
   Notice:
   1.       The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equip-
            ment.
   2.       Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
   3.       The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the
            user to correct such interference.
   RF Exposure Information
   This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits
   for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation
   exposure limits set forth for an uncontrolled environment.
   IC Statement
   1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
   the following two conditions:
               (1)this device may not cause interference, and
               (2)this device must accept any interference, including interference that may cause undesired
               operation of the device.
   2.Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :
   ( 1 ) Ce dispositif ne peut causer d'interférences ; et
   ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.



   IC Radiation Exposure Statement
   This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
   Battery Disposal and Recycling
English - 28


You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/or a battery,
it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit
www.vizio.com/environment.

Software Licenses
All software is provided subject to software license agreements and you agree that you will be bound by such license agreements in addition to other
applicable terms of use. By using the VIZIO products, you agree to the VIZIO Terms of Service and Privacy Policy, as well as Google’s Terms of Service
and Privacy Policy. The VIZIO Terms of Use and Privacy Policy may be updated from time to time and are available to view at http://www.vizio.com/
terms and http://www.vizio.com/privacy, respectively.

Export Regulations
Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”).
The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received.

The applications and content of the applications pictured herein or described in accompanying documentation may only be available in certain countries or languages, may
require additional fees or subscription charges, and may be subject to future updates, modifications or discontinuation without notice. VIZIO has no control over third party
applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions
apply. A Google account is required to download applications from the Google Play store. A MyVIZIO account is required to access certain features of the VIZIO SmartCast app.
Information in this Quick Start Guide is subject to change without notice. To review the most updated version of this Quick Start Guide and the associated User Manual, go to
http://www.vizio.com.

© 2017 VIZIO, Inc. All Right Reserved.
Image(s) used under license from Shutterstock.com

This Quick Start Guide may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy
of the information provided herein. All product specifications, functionality, features, configurations, performance, design and other product information described
herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors.

VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.




                                                                                                                                                                              English - 29


               The Bluetooth® word mark and Logos are registered trademark owned by Bluetooth SIG,Inc. and any use of such marks by
               VIZIO, Inc. is under license. Other trademarks and trade names are those of their respective owners.



               Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are registered trademarks of
               Dolby Laboratories.


               For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,
               & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc. © DTS, Inc.
               All Rights Reserved.


               This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which
               power savings will be achieved. Changing the factory default settings or enabling other features will
               increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating.
               We want to help you save energy.




English - 30


© 2017 VIZIO INC. ALL RIGHTS RESERVED.
171228-ET



Document Created: 2018-02-11 17:57:47
Document Modified: 2018-02-11 17:57:47

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC