User manual

FCC ID: XN6-S2120W

Users Manual

Download: PDF
FCCID_2352557

VIZIO QUICK START GUIDE Model: S2120w-E0

IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric • Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these shock. instructions in a safe place for future reference. • Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power • Read these instructions. cord and contact your dealer immediately. Do not try to repair your Unit yourself. • Keep these instructions. • Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the • Heed all warnings. internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock. • Follow all instructions. • Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with • Do not use this apparatus near water. heavy dust or high humidity may cause fire or electric shock. • Clean only with a dry cloth. • Ensure that the power cord and any other cables are unplugged before moving your Unit. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including wires inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period amplifiers) that produce heat. of time, unplug the power cord. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades • To reduce risk of electric shock, do not touch the connector with wet hands. with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide • Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult to leak which can damage the remote control or injure the operator. an electrician for replacement of the obsolete outlet. • See the important note and rating located on the back of the unit. • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, • Only use attachments/accessories specified by the manufacturer. or moisture. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the • CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type. apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been shall remain readily operable. damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION • To reduce the risk of electric shock or component damage, switch off the power before connecting other RISK OF ELECTRIC SHOCK DO NOT OPEN components to your Unit. • Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid Explanation of WARNING symbols: or a spray cleaner on your Unit. Do not use abrasive cleaners. The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to • Always use the accessories recommended by the manufacturer to insure compatibility. constitute a risk of shock to persons. • When moving your Unit from an area of low temperature to an area of high temperature, condensation The exclamation point within an equilateral triangle is intended to alert the user to the presence of may form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component important operating and servicing instructions in the literature accompanying the appliance. damage. • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided. • Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit. • When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord. • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. • The wall socket should be located near your Unit and be easily accessible

PACKAGE CONTENTS High Definition Sound Stand Remote Control This Quick Stereo RCA to 3.5mm Digital Optical with Batteries Start Guide Audio Cable Cable Power Coaxial Audio Cable Cable 1

CONTROLS & CONNECTIONS Front of Sound Stand LED Indicators 12 LED indicators will give visual feedback when you press buttons on the remote control. 2

Back of Sound Stand SUB OUT SUB OUT SUB OUT Power Port Subwoofer Out AUX (1) DIGITAL (3) Analog Audio In Coaxial In Service/USB Port OPTICAL (4) Service Port/USB In Digital Optical Audio In AUX (2) Analog Audio In 3

Side of Sound Stand Power Input Bluetooth Input (Hold to force pair, See Bluetooth Pairing for more information) Volume Up/Down 4

FIRST-TIME SETUP 1 Important: The Sound Stand is designed to hold TVs up to 56” in size with a weight of up to 60 lbs. The TV base should not be larger than 12.5” by 14”. Place the Sound Stand on a flat, stable level surface. VIZIO recommends that you first place your TV alongside the Sound Stand so that you have access to the connection ports. 5

Back of Sound Stand 2 SUB OUT SUB OUT GOOD GOOD BETTER BETTER 3.5MM TO 3.5MM TO DIGITAL OPTICAL DIGITAL COAXIAL RCA CABLE RCA CABLE CABLE* CABLE* CHOOSE ONE CABLE: GOOD BETTER AND CONNECT IT TO YOUR TV Note: Not all TVs have the audio outputs shown above.To connect the Sound Stand directly to your * When using either of the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM other devices (Blu-ray player, game system, etc) see your device’s user manual. 6 or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.

3 Connect the power cable to the sound stand. Plug the power cable into a power outlet. SUB OUT XIAL SUB OUT 7

4 Center your TV on top of the Sound Stand. Be sure that your TV’s base fits completely on top of the Sound Stand and does not hang off the edges. Note: Do not place any items other than the TV on the Sound Stand. 8

5 6 Top Top Remove the battery cover by gently Insert the included batteries and gently sliding it away from the remote. slide the battery cover back into place. 9

7 Turn your TV on, the Sound Stand will automatically turn on and begin searching for an active input. The LED indicators on the front of the Sound Stand will begin cycling in pairs through inputs until an audio source is detected.* Tip: Pressing the INPUT button will stop the auto detect function. You can press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Stand to Input 1. Hardware setup is complete. Input Power * Auto detect function only occurs once when Sound Stand is first powered on. To enable this feature again, you must do a Factory Reset. See Using Button Combinations on page 16 for more information. 10

USING THE REMOTE Bluetooth Input Press to enter Bluetooth input. Press to change input source. (To enter force pair mode, press and hold for 5 seconds) Power Press to turn on or off. Volume + Enter/Play/Pause Press to increase volume. Press to select an option. Press to play or pause. Previous Press to return to previous track. Next (Changes Treble and Bass levels) Press to skip to the next track. (Changes Treble and Bass levels) TruVolume Volume – Press to enable/disable Press to decrease volume. DTS TruVolume. Treble TruSurround HD Press to enter treble adjustment mode. Press to enable/disable Bass DTS TruSurround HD. Press to enter bass adjustment mode. Mute Press to mute/unmute. 11

LED INDICATORS The LED Indicators give visual feedback when you press buttons on the remote control. Function LED Behavior Description Analog Audio In - AUX (1) Press the INPUT button on the remote to cycle through each available input: Analog Audio In - AUX (2) • Analog Audio In - AUX (1) Coaxial In - Digital (3) • Analog Audio In - AUX (2) Input Digital Optical Audio In - • Coaxial In- Digital (3) Optical (4) • Digital Optical Audio In - Optical (4) Bluetooth • Bluetooth USB Device - USB • USB Device - USB (When searching for device) Press and hold the button on the remote. The Sound Stand will be discoverable for 15 Bluetooth Flash from Left to Right minutes. You can now search for the Sound Stand (VIZIO S2120w) using your Bluetooth Pairing and back continuously. Device. The Sound Stand will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the Sound Stand. Side TruVolume On: Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume DTS TruVolume provides a consistent and comfortable volume level for a more enjoyable listening On/Off TruVolume Off: experience. TruSurround On: DTS TruSurround Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will On/Off TruSurround Off: produce virtual surround sound. When disabled (Off), all sources will playback in 2.1 stereo. Two center LEDs indicate Press the TREBLE button then press the Next/Previous button to increase/decrease the Treble Levels Treble level 0. treble level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels. Two center LEDs indicate Press the BASS button then press the Next/Previous button to increase/decrease the bass Bass Levels Bass level 0. level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels. Dolby Digital Indicator. Dolby Digital is only available on either the Coaxial In or Digital Optical Audio In inputs. Dolby Digital When a Dolby Digital signal is detected, the Dolby Digital LED indicator will light up for 5 seconds before fading away. 12

BLUETOOTH PAIRING To pair the Sound Stand with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Stand or the Bluetooth button on the remote for five (5) seconds. When the Sound Stand is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Stand will light sequentially from left to right and back again. Once the device is paired, the LED Indicators will stop flashing. 2. You can now search for the Sound Stand (VIZIO S2120w) using your Bluetooth device. For more information, see the documentation that came with your device. 3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the Sound Stand. Side of Sound Stand 13

USING BLUETOOTH MODE Your Sound Stand supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Conn (Device compatibility will vary) See your device’s documentation for more information. Once you have paired to the your source device to the Sound Stand, as long as you stay within range of the Sound Stand, your device should exam remain paired, even if you change the input on the Sound Stand. To list sourc Your Sound Stand is not equipped with a microphone, so it cannot operate as a hands-free Optic device for a smartphone. transm video video your T Maximizing Signal A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal: • If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the Sound Stand. • Be sure that there are no solid obstructions in the line-of-sight between the Sound Stand and the source device. • Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range. Reduce the volume levels on your device and on the Sound Stand before pressing Play. High volume levels can damage your hearing. 14

ADVANCED SETUP Back of Sound Stand Connect up to five (5) different devices to the Sound Stand (devices shown are examples you can use any device). SUB OUT To listen to a device, change the input source on the Sound Stand. Optical, Coaxial, and 3.5mm cables transmit audio only. If connecting a video device, you will need a separate SUB OUT video connection from the device to your TV. 3.5MM TO USB 3.5MM TO DIGITAL OPTICAL DIGITAL COAXIAL RCA AUDIO CABLE THUMB DRIVE* RCA AUDIO CABLE CABLE CABLE Game Console Network Media Player Tablet/MP3 Player/Laptop *Supports .WAV file format playback only. 15

CONNECTING A SUBWOOFER Back of Sound Stand SUB OUT To connect a subwoofer: 1. Press the BASS button on the remote control to RCA Subwoofer Cable* enter bass adjustment mode. 2. Use the Previous/Next buttons to adjust the Optional Subwoofer* bass level to the center position. 3. Power Off the Sound Stand and Subwoofer. Connect an RCA cable from the Sound Bar to the Subwoofer. 4. Power On the Sound Stand and Subwoofer. 5. Manually adjust the SUB gain (Volume) and phase to your preference. See your subwoofer’s user manual for more information. 6. Use the BASS button on the remote control to adjust the subwoofer’s output. *RCA subwoofer cable and subwoofer not included. 16

USING BUTTON COMBINATIONS There are 3 Functions that are triggered by 3 different button combinations on the Sound Stand. Function LED Behavior Description All 12 LEDs will Reset the Sound Stand to the factory default settings. To perform a Factory Reset, press and Factory flash 3 times: hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Reset Note: This will erase all settings and preferences that you have set. Enable VIZIO TV Remote: VIZIO TV Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume Remote Disable VIZIO TV Remote: of the Sound Stand. To enable/disable this function, press and hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds. Control Enable Energy Star: When the Energy Star setting is enabled, the Sound Stand will automatically power down after a period of inactivity. When disabled, the Sound Stand will remain powered on until you Energy Star Disable Energy Star: turn it off. To enable/disable this function, Press and Hold the Power ( ) and Volume Down (—)buttons for 5 seconds. Note: Energy Star setting is enabled by default. Side of Sound Stand Power Input Bluetooth Input Volume 17

VIZIO RECOMMENDS Introducing the new E-series slim frame design. The VIZIO LED HDTV is shattering the mold in a way only VIZIO can, with high-quality design and picture at the best value. With a stunningly slim outer frame design – and LED backlight for rich colors and vivid details, this HDTV gives you the best picture at the best value. Available at www.VIZIO.com This Product Sold Separately 18

Take A Moment To Register Your Product At VIZIO.COM/PRODUCT-REGISTRATION Why Register? Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW

Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our award-winning support team at: Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Hours Of Operation: Monday - Friday: 7 am to 11 pm (CST) Saturday - Sunday: 9 am to 6 pm (CST)

HELP & TROUBLESHOOTING • Press the POWER button on the remote control or on the top of your Sound Stand. There is no power. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. • Increase the volume. Press Volume Up on the remote control or on the top of your Sound Stand. • Press MUTE on the remote to ensure the Sound Stand is not muted. • Press INPUT on the remote or on the top of your Sound Stand to select a different input source. There is no sound. • When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio. • Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information. • If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted. • Ensure all cables and wires are securely connected. • Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may I hear buzzing, be with the original device. humming, or • Connect your device to a different input on the Sound Stand. rattling. • The subwoofer is powerful, either turn the bass down or remove any small objects (such as photo frames) away from the Sound Stand. You can also place the Sound Stand on a shelf by itself. • Replace the remote batteries with new ones. The remote • Point the remote directly at the center of the Sound Stand when pressing a button. isn’t working. • If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. 21

ONE-YEAR LIMITED WARRANTY LEG ON PARTS AND LABOR FCC C Covers units purchased as new in United States and Puerto Rico Only NOTE: T VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option reason and discretion. and us particu To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through user is Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period. 1. Reo 2. Incr Parts and Labor 3. Con There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts 4. Con and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater. Type of Service This de Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return must a shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE. Notice Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support 1. The will provide instructions for packing and shipping the covered Product to the VIZIO service center. 2. Shie Limitations and Exclusions 3. The VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper such operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine RF Exp maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller. This de radio f THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABIL- uncon ITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE IC Stat OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL Opera LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY 1. This GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. 2. This CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION. ope SPECIFICATIONS IC Rad This eq environ Sound Stand: 2 x 2.75” Full Range Drivers Sound Pressure Level (System): 95 dB betwee Subwoofer: Analog output Frequency Response (System): 90 Hz - 19 KHz Dispos Inputs: 1 x 3.5mm Stereo Audio 1 x RCA Stereo Audio Power Input: 120 VAC, 60 Hz You mu 1 x Optical (Toslink) produc Compliances: UL, C-UL, FCC, NRCAN house 1 x Digital Coaxial Audio 1 x USB (WAV playback only) Other: Bluetooth (Wireless) Image 22

LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide ety (90) option reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the hrough user is encouraged to try to correct the interference by one or more of the following measures: ERVICE 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. nt parts 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device r return must accept any interference received, including interference that may cause undesired operation. Notice: upport 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct proper such interference. allation routine RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an NTABIL- uncontrolled environment. ES AND ERABLE IC Statement Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby ERCIAL Operation is subject to the following two conditions: Laboratories. MPLIED RRANTY 1. This device may not cause interference, and For DTS patents, see http://patents.dts.com. Manufactured NOTICE. 2. This device must accept any interference, including interference that may cause undesired under license from DTS Licensing Limited. DTS, the Symbol, operation of the device. & DTS and the Symbol together are registered trademarks and DTS Digital Surround is a trademark of DTS, Inc. © DTS, IC Radiation Exposure Statement Inc. All Rights Reserved. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm For DTS patents, see http://patents.dts.com. Manufactured between the radiator & your body. under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks Disposal and Recycling and DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc. You must dispose of this product properly, according to local laws and regulations. Because this All Rights Reserved. product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power Other: savings will be achieved. Changing the factory default settings or enabling other features will increase power Image(s) used under license from Shutterstock.com consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. We want to help you save energy. 23

IC warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter


Document Created: 2014-07-28 16:02:15
Document Modified: 2014-07-28 16:02:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC