FCC MPE

FCC ID: XMR201910BG95M3

RF Exposure Info

Download: PDF
FCCID_4471789

MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR201910BG95M3 Product LTE Cat M1 & Cat NB2 & EGPRS Module Brand Quectel Marketing Quectel BG95-M3 Model BG95-M3 Report No. R1907A0446-M1 Issue Date September 12, 2019 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000

MPE Test Report Report No.: R1907A0446‐M1 Table of Contents 1 Test Laboratory............................................................................................................................... 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2 Test facility .............................................................................................................................. 3 1.3 Testing Location ...................................................................................................................... 4 1.4 Laboratory Environment .......................................................................................................... 4 2 Description of Equipment under Test .............................................................................................. 5 3 Maximum conducted output power (measured) and antenna Gain ................................................ 6 4 Test Result ..................................................................................................................................... 8 TA Technology (Shanghai) Co., Ltd. Page 2 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. IC (recognition number is 8510A) TA Technology (Shanghai) Co., Ltd. has been listed by industry Canada to perform electromagnetic emission measurement. VCCI (recognition number is C-4595, T-2154, R-4113, G-10766) TA Technology (Shanghai) Co., Ltd. has been listed by industry Japan to perform electromagnetic emission measurement. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. TA Technology (Shanghai) Co., Ltd. Page 3 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: xukai@ta-shanghai.com 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25 C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. TA Technology (Shanghai) Co., Ltd. Page 4 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd Building 5, Shanghai Business Park Phase III (Area B), No.1016 Applicant address Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer Quectel Wireless Solutions Co., Ltd Building 5, Shanghai Business Park Phase III (Area B), No.1016 Manufacturer address Tianlin Road, Minhang District, Shanghai, China 200233 General Technologies Model BG95-M3 SN 864475040001835 Hardware Version R2.1 Software Version BG95M3LAR02A01 Date of Testing: August 20, 2019 ~ September 5, 2019 TA Technology (Shanghai) Co., Ltd. Page 5 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Burst Turn up Division Time-Averaged Tune up Band Power(dBm) Factors (dB) Power (dBm) GSM850 GSM 35.000 -9.03 25.97 GSM1900 GSM 32.000 -9.03 22.97 Note: Division Factors To average the power, the division factor is as follows: 1Txslot = 1 transmit time slot out of 8 time slots => conducted power divided by (8/1) => -9.03 dB 2Txslots = 2 transmit time slots out of 8 time slots => conducted power divided by (8/2) => -6.02 dB 3Txslots = 3 transmit time slots out of 8 time slots => conducted power divided by (8/3) => -4.26 dB 4Txslots = 4 transmit time slots out of 8 time slots => conducted power divided by (8/4) => -3.01 dB Maximum Conducted Output Power (dBm) Band (dBm) (mW) GSM850 25.970 395.367 GSM1900 22.970 198.153 LTE Band 2 22.000 158.489 LTE Band 4 22.000 158.489 LTE Band 5 22.000 158.489 LTE Band 12 22.000 158.489 LTE Band 13 22.000 158.489 LTE Band 14 22.000 158.489 LTE Band 25 22.000 158.489 LTE Band 26 22.000 158.489 LTE Band 66 22.000 158.489 LTE Band 85 22.000 158.489 NB-IOT Band 2 22.000 158.489 NB-IOT Band 4 22.000 158.489 TA Technology (Shanghai) Co., Ltd. Page 6 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 NB-IOT Band 5 22.000 158.489 NB-IOT Band 12 22.000 158.489 NB-IOT Band 13 22.000 158.489 NB-IOT Band 25 22.000 158.489 NB-IOT Band 26 22.000 158.489 NB-IOT Band 66 22.000 158.489 NB-IOT Band 71 22.000 158.489 NB-IOT Band 85 22.000 158.489 TA Technology (Shanghai) Co., Ltd. Page 7 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 4 Test Result According to section 1.1310 of FCC 47 CFR Part 1, limits for maximum permissible exposure (MPE) are as following Note1. Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational / controlled limits apply provided he or she is made aware of the potential for exposure. Note2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. TA Technology (Shanghai) Co., Ltd. Page 8 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 The maximum permissible exposure for 300~1500 MHz is f/1500, for 1500~100,000MHz is 1.0.So Band The maximum permissible exposure (mW/cm2) GSM850 0.566 GSM1900 1.000 LTE Band 2 1.000 LTE Band 4 1.000 LTE Band 5 0.566 LTE Band 12 0.477 LTE Band 13 0.525 LTE Band 14 0.532 LTE Band 25 1.000 LTE Band 26 0.566 LTE Band 66 1.000 LTE Band 85 0.477 NB-IOT Band 2 1.000 NB-IOT Band 4 1.000 NB-IOT Band 5 0.566 NB-IOT Band 12 0.477 NB-IOT Band 13 0.525 NB-IOT Band 25 1.000 NB-IOT Band 26 0.566 NB-IOT Band 66 1.000 NB-IOT Band 71 0.465 NB-IOT Band 85 0.477 TA Technology (Shanghai) Co., Ltd. Page 9 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 Maximum Conducted EIRP Power density Limit Margin1 Margin2 Final Band Output limit (dB) (dB) Margin Power (dBm) (mW/cm2) (dBm) (dB) (dBm) GSM850 25.970 40.600 14.630 0.566 34.541 8.571 8.571 GSM1900 22.970 33.000 10.030 1.000 37.013 14.043 10.030 LTE Band 2 22.000 33.000 11.000 1.000 37.013 15.013 11.000 LTE Band 4 22.000 30.000 8.000 1.000 37.013 15.013 8.000 LTE Band 5 22.000 40.600 18.600 0.566 34.541 12.541 12.541 LTE Band 12 22.000 36.920 14.920 0.477 33.798 11.798 11.798 LTE Band 13 22.000 36.920 14.920 0.525 34.214 12.214 12.214 LTE Band 14 22.000 36.920 14.920 0.532 34.272 12.272 12.272 LTE Band 25 22.000 33.000 11.000 1.000 37.013 15.013 11.000 LTE Band 26 22.000 40.600 18.600 0.566 34.541 12.541 12.541 LTE Band 66 22.000 30.000 8.000 1.000 37.013 15.013 8.000 LTE Band 85 22.000 36.920 14.920 0.477 33.798 11.798 11.798 NB-IOT Band 2 22.000 33.000 11.000 1.000 37.013 15.013 11.000 NB-IOT Band 4 22.000 30.000 8.000 1.000 37.013 15.013 8.000 NB-IOT Band 5 22.000 40.600 18.600 0.566 34.541 12.541 12.541 NB-IOT Band 12 22.000 36.920 14.920 0.477 33.798 11.798 11.798 NB-IOT Band 13 22.000 36.920 14.920 0.525 34.214 12.214 12.214 NB-IOT Band 25 22.000 33.000 11.000 1.000 37.013 15.013 11.000 NB-IOT Band 26 22.000 40.600 18.600 0.566 34.541 12.541 12.541 NB-IOT Band 66 22.000 30.000 8.000 1.000 37.013 15.013 8.000 NB-IOT Band 71 22.000 36.920 14.920 0.465 33.687 11.687 11.687 NB-IOT Band 85 22.000 36.920 14.920 0.477 33.798 11.798 11.798 Note: 1. The Maximum allowed antenna gain per Band should be less than or equal to the Final Margin which is the allowable maximum gain value to comply with limits for maximum permissible exposure (MPE). 2. The Final Margin is determined and selected to the worst-case of Margin1 and Margin2. 3. Margin1=EIRP Limit(dBm)-Maximum Conducted Power (dBm). EIRP limit reference standard part22/ part24/part27and part90 for each band, EIRP = ERP + 2.15 (dB). 4. Margin2=Power density Limit(dBm)-Maximum Conducted Power (dBm). Power density Limit(dBm): The max. obtained by MPE with 20cm. TA Technology (Shanghai) Co., Ltd. Page 10 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. TA Technology (Shanghai) Co., Ltd. Page 11 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1907A0446‐M1 RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided. This calculation is based on the conducted power, considering maximum power and antenna gain. The formula shown in KDB 447498 D01 is used in the calculation. Equation from KDB 447498 D01 General RF Exposure Guidance v06 (10/23/2015) is: 2 S= PG / 4∏R 2 Where: S = power density (in appropriate units, e.g. mW/cm ) P = Time-average maximum tune up procedure (in appropriate units, e.g., mW) G = the numeric gain of the antenna R = distance to the center of radiation of the antenna (20 cm = limit for MPE) Test Result Limit Value Band PG (mW) 2 2 Conclusion (mW/cm ) (mW/cm ) GSM850 2845.116 0.566 0.566 Pass GSM1900 1995.262 0.397 1.000 Pass LTE Band 2 1995.262 0.397 1.000 Pass LTE Band 4 1000.000 0.199 1.000 Pass LTE Band 5 2845.116 0.566 0.566 Pass LTE Band 12 2397.728 0.477 0.477 Pass LTE Band 13 2638.761 0.525 0.525 Pass LTE Band 14 2674.238 0.532 0.532 Pass LTE Band 25 1995.262 0.397 1.000 Pass LTE Band 26 2845.116 0.566 0.566 Pass LTE Band 66 1000.000 0.199 1.000 Pass LTE Band 85 2397.728 0.477 0.477 Pass NB-IOT Band 2 1995.262 0.397 1.000 Pass NB-IOT Band 4 1000.000 0.199 1.000 Pass NB-IOT Band 5 2845.116 0.566 0.566 Pass NB-IOT Band 12 2397.728 0.477 0.477 Pass NB-IOT Band 13 2638.761 0.525 0.525 Pass NB-IOT Band 25 1995.262 0.397 1.000 Pass NB-IOT Band 26 2845.116 0.566 0.566 Pass NB-IOT Band 66 1000.000 0.199 1.000 Pass NB-IOT Band 71 2337.222 0.465 0.465 Pass NB-IOT Band 85 2397.728 0.477 0.477 Pass Note: R = 20cm ∏= 3.1416 Note: For transmitters, minimum separation distance is 20cm, even if calculations indicate MPE distance is less. TA Technology (Shanghai) Co., Ltd. Page 12 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.


Document Created: 2019-10-17 12:23:45
Document Modified: 2019-10-17 12:23:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC