MPE

FCC ID: XMR201909EC21AUX

RF Exposure Info

Download: PDF
FCCID_4495591

MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR201909EC21AUX Product LTE Module Brand Quectel Model EC21-AUX, EC21-AUX MINIPCIE Report No. R1908A0502-M1V1 Issue Date October 29, 2019 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000

MPE Test Report Report No.: R1908A0502-M1V1 Table of Contents 1 Test Laboratory............................................................................................................................... 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2 Testing Location ...................................................................................................................... 3 1.3 Laboratory Environment .......................................................................................................... 3 2 Description of Equipment under Test .............................................................................................. 4 3 Maximum conducted output power (measured) and antenna Gain ................................................ 5 4 Test Result ..................................................................................................................................... 6 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 2 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1908A0502-M1V1 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: xukai@ta-shanghai.com 1.3 Laboratory Environment Temperature Min. = 18C, Max. = 25 C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 3 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1908A0502-M1V1 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd Building 5, Shanghai Business Park Phase III (Area B), No.1016 Applicant address Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer Quectel Wireless Solutions Co., Ltd Building 5, Shanghai Business Park Phase III (Area B), No.1016 Manufacturer address Tianlin Road, Minhang District, Shanghai, China 200233 General Technologies Model EC21-AUX, EC21-AUX MINIPCIE IMEI 868450040001099 Hardware Version R1.0 Software Version EC21AUXGAR08A01M1G Date of Testing: August 19, 2019 ~October 10, 2019 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 4 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1908A0502-M1V1 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Burst Turn up Division Factors Time-Averaged Tune Band Power(dBm) (dB) Power (dBm) GSM850 32.24 -9.03 23.21 GSM1900 29.89 -9.03 20.86 Note: Division Factors To average the power, the division factor is as follows: 1Txslot = 1 transmit time slot out of 8 time slots => conducted power divided by (8/1) => -9.03 dB 2Txslots = 2 transmit time slots out of 8 time slots => conducted power divided by (8/2) => -6.02 dB 3Txslots = 3 transmit time slots out of 8 time slots => conducted power divided by (8/3) => -4.26 dB 4Txslots = 4 transmit time slots out of 8 time slots => conducted power divided by (8/4) => -3.01 dB Maximum Conducted Output Power Band (dBm) (mW) GSM850 23.21 209.411 GSM1900 20.86 121.899 WCDMA II 25.00 316.228 WCDMA IV 25.00 316.228 WCDMA V 25.00 316.228 LTE Band 2 25.00 316.228 LTE Band 4 25.00 316.228 LTE Band 5 25.00 316.228 LTE Band 7 25.00 316.228 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 5 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1908A0502-M1V1 4 Test Result According to section 1.1310 of FCC 47 CFR Part 1, limits for maximum permissible exposure (MPE) are as following Note1. Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational / controlled limits apply provided he or she is made aware of the potential for exposure. Note2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 6 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1908A0502-M1V1 The maximum permissible exposure for 300~1500 MHz is f/1500, for 1500~100,000MHz is 1.0.So Band The maximum permissible exposure GSM850 0.55mW/cm2 GSM1900 1.0mW/cm2 WCDMA II 1.0mW/cm2 WCDMA IV 1.0mW/cm2 WCDMA V 0.55mW/cm2 LTE Band 2 1.0mW/cm2 LTE Band 4 1.0mW/cm2 LTE Band 5 0.55mW/cm2 LTE Band 7 1.0mW/cm2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 7 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1908A0502-M1V1 Maximum Conducted EIRP Power density Limit Margin1 Margin2 Final Band Output limit (dB) (dB) Margin Power (dBm) (mW/cm2) (dBm) (dB) (dBm) GSM850 23.210 38.450 15.240 0.550 34.416 11.206 11.206 GSM1900 20.860 33.000 12.140 1.000 37.013 16.153 12.140 WCDMA II 25.000 33.000 8.000 1.000 37.013 12.013 8.000 WCDMA IV 25.000 30.000 5.000 1.000 37.013 12.013 5.000 WCDMA V 25.000 38.450 13.450 0.550 34.416 9.416 9.416 LTE Band 2 25.000 33.000 8.000 1.000 37.013 12.013 8.000 LTE Band 4 25.000 30.000 5.000 1.000 37.013 12.013 5.000 LTE Band 5 25.000 38.450 13.450 0.550 34.416 9.416 9.416 LTE Band 7 25.000 33.000 8.000 1.000 37.013 12.013 8.000 Note: 1. The Maximum allowed antenna gain per Band should be less than or equal to the Final Margin which is the allowable maximum gain value to comply with limits for maximum permissible exposure (MPE). 2. The Final Margin is determined and selected to the worst-case of Margin1 and Margin2. 3. Margin1=EIRP Limit(dBm)-Maximum Conducted Power (dBm). EIRP limit reference standard part22/ part24/part27and part90 for each band, EIRP = ERP + 2.15 (dB). 4. Margin2=Power density Limit(dBm)-Maximum Conducted Power (dBm). Power density Limit(dBm): The max. obtained by MPE with 20cm. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 8 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No.: R1908A0502-M1V1 RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided. This calculation is based on the conducted power, considering maximum power and antenna gain. The formula shown in KDB 447498 D01 is used in the calculation. Equation from KDB 447498 D01 General RF Exposure Guidance v06 (10/23/2015) is: 2 S= PG / 4∏R 2 Where: S = power density (in appropriate units, e.g. mW/cm ) P = Time-average maximum tune up procedure (in appropriate units, e.g., mW) G = the numeric gain of the antenna R = distance to the center of radiation of the antenna (20 cm = limit for MPE) Test Result Limit Value Band PG (mW) 2 2 Conclusion (mW/cm ) (mW/cm ) GSM850 2764.394 0.550 0.550 Pass GSM1900 1995.262 0.397 1.000 Pass WCDMA II 1995.262 0.397 1.000 Pass WCDMA IV 1000.000 0.199 1.000 Pass WCDMA V 2764.394 0.550 0.550 Pass LTE Band 2 1995.262 0.397 1.000 Pass LTE Band 4 1000.000 0.199 1.000 Pass LTE Band 5 2764.394 0.550 0.550 Pass LTE Band 7 1995.262 0.397 1.000 Pass Note: R = 20cm ∏= 3.1416 Note: For transmitters, minimum separation distance is 20cm, even if calculations indicate MPE distance is less. TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 9 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.


Document Created: 2019-10-31 07:49:05
Document Modified: 2019-10-31 07:49:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC