MPE Report

FCC ID: XMR201906EG21G

RF Exposure Info

Download: PDF
FCCID_4310729

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/10016E-0102 Page: 1 of 7 Cover P RF Exposure Evaluation Report Application No.: HR/2019/10016E-01 Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Factory: Quectel Wireless Solutions Co., Ltd. Address of Factory: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China EUT Description: LTE Module Model No.: EG21-G, EG21-G MINIPCIE Trade Mark: Quectel FCC ID: XMR201906EG21G Standards: 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E 47 CFR Part 27 subpart C 47 CFR Part 15 subpart C Date of Receipt: 2019/1/30 Date of Test: 2019/1/31 to 2019/5/4 Date of Issue: 2019/5/7 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Derek Yang Wireless Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/10016E-0102 Page: 2 of 7 1 Version Revision Record Version Chapter Date Modifier Remark 00 2019/5/7 Original Authorized for issue by: 2019/5/7 Mike Hu /Project Engineer 2019/5/7 David Chen /Reviewer Reamark: The difference between EG21-G and EG21-G MIMIPCIE: EG21-G and EG21-G MINIPCIE both are LTE modules(Category: Cat.1). They have the same frequency and use the same chipset and share the same software & hardware design. EG21-G MINIPCIE makes up of EG21-G module and PCIe carrier board.No any other internal changes in EG21-G module. We hereby state that two models are identical in interior structure and components, and just connector interface is different for the marketing requirement. According to the difference above, all the tests were performed on EG21-G, and the data of EG21-G MINIPCIE can refer to EG21-G.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/10016E-0102 Page: 3 of 7 Contents 1 VERSION ................................................................................................................................................................. 2 2 GENERAL INFORMATION .................................................................................................................................. 4 2.1 CLIENT INFORMATION ..................................................................................................................................... 4 2.2 TEST LOCATION .............................................................................................................................................. 4 2.3 TEST FACILITY ................................................................................................................................................. 4 2.4 GENERAL DESCRIPTION OF EUT.................................................................................................................... 5 2.5 TEST MODE ..................................................................................................................................................... 5 3 RF EXPOSURE EVALUATION ........................................................................................................................... 6 3.1 RF EXPOSURE COMPLIANCE REQUIREMENT ................................................................................................. 6 3.1.1 Limits .......................................................................................................................................................... 6 3.1.2 Test Procedure ......................................................................................................................................... 6 3.1.3 EUT RF Exposure Evaluation ................................................................................................................ 7

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/10016E-0102 Page: 4 of 7 2 General Information 2.1 Client Information Applicant: Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai Address of Applicant: 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai Address of Manufacturer: 200233, China Factory: Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai Address of Factory: 200233, China 2.2 Test Location Company: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Address: Guangdong, China Post code: 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 E-mail: ee.shenzhen@sgs.com 2.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Industry Canada (IC) Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/10016E-0102 Page: 5 of 7 2.4 General Description of EUT EUT Description:: LTE Module Model No.: EG21-G, EG21-G MINIPCIE Trade Mark: Quectel Hardware Version: R1.0 Software Version: EG21GGAR07A07M2G GSM850: 2.29dBi; GSM1900:1.59dBi WCDMA BAND II:1.59dBi WCDMA BAND VI:2dBi WCDMA BAND V:2.29dBi LTE BAND 2:1.59dBi; LTE BAND 4:2dBi; Antenna Gain: LTE BAND 5:2.29dBi; LTE BAND 7: 3dBi; LTE BAND 12: 3.26dBi; LTE BAND 13: 4.45dBi; LTE BAND 25: 1.59dBi; LTE BAND 26: 2.53dBi; LTE BAND 38: 2.06dBi; LTE BAND 41: 3dBi; 2.5 Test Mode Test Mode Test Modes Description LTE/TM1 LTE system, QPSK modulation LTE/TM2 LTE system, 16QAM modulation REMARK: The test mode(s) are selected according to relevant radio technology specifications.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/10016E-0102 Page: 6 of 7 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 3.1.2 Test Procedure Software provided by client enabled the EUT to transmit data at lowest, middle and highest channel individually.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/10016E-0102 Page: 7 of 7 3.1.3 EUT RF Exposure Evaluation Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.0 / 2.0 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Max Output Power Conducted Output Gain Antenna Power EIRP(ERP) Density Gain Max Gain Operating Frequency Average Power Limit according Gain to Limit at R = 20 according Allowed conclusion Band (MHz) Output to Antenna (mW/cm2) to EIRP (dBi) Antenna (dBm) cm to Pd (dBi) (dBi) Power (mw) (dBi) (dBm) (mW/cm2) (dBm) GSM850 824.2 2.29 25.81 25.95 38.45 381.0658 0.1284 0.5495 14.79 8.60 8.60 Pass GSM1900 1850.2 1.59 22.81 24.40 33.00 190.9853 0.0548 1.0000 10.19 14.20 10.19 Pass WCDMA B2 1852.4 1.59 25.00 26.59 33.00 316.2278 0.0907 1.0000 8.00 12.01 8.00 Pass WCDMA B4 1712.4 2.00 25.00 27.00 30.00 316.2278 0.0997 1.0000 5.00 12.01 5.00 Pass WCDMA B5 826.4 2.29 25.00 25.14 38.45 316.2278 0.1066 0.5509 15.60 9.42 9.42 Pass LTE B2 1850.7 1.59 25.00 26.59 33.00 316.2278 0.0907 1.0000 8.00 12.01 8.00 Pass LTE B4 1710.7 2.00 25.00 27.00 30.00 316.2278 0.0997 1.0000 5.00 12.01 5.00 Pass LTE B5 824.70 2.29 25.00 25.14 38.45 316.2278 0.1066 0.5498 15.60 9.41 9.41 Pass LTE B7 2502.50 3.00 25.00 28.00 33.00 316.2278 0.1255 1.0000 8.00 12.01 8.00 Pass LTE B12 699.70 3.26 25.00 26.11 34.77 316.2278 0.1333 0.4665 11.92 8.70 8.70 Pass LTE B13 779.50 4.45 25.00 27.30 34.77 316.2278 0.1753 0.5197 11.92 9.16 9.16 Pass LTE B25 1850.7 1.59 25.00 26.59 33.00 316.2278 0.0907 1.0000 8.00 12.01 8.00 Pass LTE B26(814-824) 814.7 2.53 25.00 25.38 50.00 316.2278 0.1126 0.5431 27.15 9.36 9.36 Pass LTE B26(824-849) 824.7 2.53 25.00 25.38 38.45 316.2278 0.1126 0.5498 15.60 9.41 9.41 Pass LTE B38 2572.5 2.06 25.00 27.06 33.00 316.2278 0.1011 1.0000 8.00 12.01 8.00 Pass LTE B41 2498.5 3.00 25.00 28.00 33.00 316.2278 0.1255 1.0000 8.00 12.01 8.00 Pass Remark: Refer to report No. HR/2019/10016E-0101 for EUT test Max Conducted Output Power value.


Document Created: 2019-05-29 15:24:52
Document Modified: 2019-05-29 15:24:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC