Test report WLAN part 1

FCC ID: XMR201905SC66MW

Test Report

Download: PDF
FCCID_4259977

FCC RF Test Report Report No. : FR931313C FCC RF Test Report APPLICANT : Quectel Wireless Solutions Co., Ltd. EQUIPMENT : Wi-Fi & Bluetooth Module BRAND NAME : Quectel MODEL NAME : SC66-MW FCC ID : XMR201905SC66MW STANDARD : FCC Part 15 Subpart C §15.247 CLASSIFICATION : (DTS) Digital Transmission System The product was received on Mar. 13, 2019 and testing was completed on Apr. 25, 2019. We, Sporton International (Kunshan) Inc., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Kunshan) Inc., the test report shall not be reproduced except in full. Approved by: James Huang / Manager Sporton International (Kunshan) Inc. No. 1098, Pengxi North Road, Kunshan Economic Development Zone, Jiangsu Province 215335, China Sporton International (Kunshan) Inc. Page Number : 1 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C TABLE OF CONTENTS REVISION HISTORY.......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 6 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Testing Location ................................................................................................................................ 7 1.7 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency and Channel ........................................................................................................ 8 2.2 Test Mode .......................................................................................................................................... 9 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support Unit used in test configuration and system ........................................................................ 10 2.5 EUT Operation Test Setup .............................................................................................................. 11 2.6 Measurement Results Explanation Example ................................................................................... 11 3 TEST RESULT ........................................................................................................................................... 12 3.1 6dB and 99% Bandwidth Measurement .......................................................................................... 12 3.2 Output Power Measurement ............................................................................................................ 14 3.3 Power Spectral Density Measurement ............................................................................................ 15 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 17 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 42 3.6 AC Conducted Emission Measurement........................................................................................... 46 3.7 Antenna Requirements .................................................................................................................... 48 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 49 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 50 APPENDIX A. CONDUCTED TEST RESULTS APPENDIX B. AC CONDUCTED EMISSION TEST RESULT APPENDIX C. RADIATED SPURIOUS EMISSION APPENDIX D. DUTY CYCLE PLOTS APPENDIX E. SETUP PHOTOGRAPHS Sporton International (Kunshan) Inc. Page Number : 2 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR931313C Rev. 01 Initial issue of report Apr. 28, 2019 Sporton International (Kunshan) Inc. Page Number : 3 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C SUMMARY OF TEST RESULT Report FCC Rule Description Limit Result Remark Section 3.1 15.247(a)(2) 6dB Bandwidth ≥ 0.5MHz Pass - 3.1 - 99% Bandwidth - Pass - 3.2 15.247(b) Power Output Measurement ≤ 30dBm Pass - 3.3 15.247(e) Power Spectral Density ≤ 8dBm/3kHz Pass - Conducted Band Edges Pass - 3.4 15.247(d) ≤ 20dBc Conducted Spurious Emission Pass - Radiated Band Edges and 15.209(a) & Under limit 3.5 15.247(d) Pass 3.03 dB at Radiated Spurious Emission 15.247(d) 2483.50 MHz Under limit 3.6 15.207 AC Conducted Emission 15.207(a) Pass 17.39 dB at 0.513 MHz 15.203 & 3.7 Antenna Requirement N/A Pass - 15.247(b) Sporton International (Kunshan) Inc. Page Number : 4 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 1 General Description 1.1 Applicant Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China 1.2 Manufacturer Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China 1.3 Product Feature of Equipment Under Test Product Feature Equipment Wi-Fi & Bluetooth Module Brand Name Quectel Model Name SC66-MW FCC ID XMR201905SC66MW WLAN 2.4GHz 802.11b/g/n HT20/HT40 WLAN 5GHz 802.11a/n HT20/HT40 EUT supports Radios application WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE HW Version R1.0 SW Version SC66MWNAR01A02 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Sporton International (Kunshan) Inc. Page Number : 5 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 1.4 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Channel Frequency Range 2412 MHz ~ 2462 MHz MIMO <Ant. 1 + 2> 802.11b : 20.31 dBm (0.1074 W) Maximum (Peak) Output Power to 802.11g : 19.45 dBm (0.0881 W) antenna 802.11n HT20 : 18.27 dBm (0.0671 W) 802.11n HT40 : 19.68 dBm (0.0929 W) MIMO <Ant. 1> 802.11b : 13.29MHz 802.11g : 18.23MHz 802.11n HT20 : 19.23MHz 802.11n HT40 : 36.86MHz 99% Occupied Bandwidth MIMO <Ant. 2> 802.11b : 12.84MHz 802.11g : 17.98MHz 802.11n HT20 : 19.18MHz 802.11n HT40 : 36.56MHz Ant. 1: Fixed External Antenna with gain 5.38 dBi Antenna Type / Gain Ant. 2: Fixed External Antenna with gain 5.38 dBi 802.11b : DSSS (DBPSK / DQPSK / CCK) Type of Modulation 802.11g/n : OFDM (BPSK / QPSK / 16QAM / 64QAM) Ant. 1 Ant. 2 Antenna Function 802.11b/g/n V V (MIMO) Note: MIMO Ant. 1+2 is a calculated result from sum of the power MIMO Ant. 1 and MIMO Ant. 2. 1.5 Modification of EUT No modifications are made to the EUT during all test items. Sporton International (Kunshan) Inc. Page Number : 6 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 1.6 Testing Location Sporton Lab is accredited to ISO 17025 by National Voluntary Laboratory Accreditation Program (NVLAP code: 600155-0). Test Site Sporton International (Kunshan) Inc. No. 1098, Pengxi North Road, Kunshan Economic Development Zone, Jiangsu Province 215335, China Test Site Location TEL : 86-512-57900158 FAX : 86-512-57900958 Sporton Site No. FCC designation No. FCC Test Firm Registration No. TH01-KS Test Site No. CO01-KS CN5013 630927 03CH06-KS 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR Part 15 Subpart C §15.247  FCC KDB 558074 D01 15.247 Meas Guidance v05r01  FCC KDB 662911 D01 Multiple Transmitter Output v02r01.  ANSI C63.10-2013 Remark: 1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. Sporton International (Kunshan) Inc. Page Number : 7 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 2 Test Configuration of Equipment Under Test a. The EUT has been associated with peripherals and configuration operated in a manner tended to maximize its emission characteristics in a typical application. Frequency range investigated: conduction emission (150 kHz to 30 MHz), radiation emission (9 kHz to the 10th harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower). b. AC power line Conducted Emission was tested under maximum output power. 2.1 Carrier Frequency and Channel Freq. Freq. Frequency Band Channel Channel (MHz) (MHz) 1 2412 7 2442 2 2417 8 2447 3 2422 9 2452 2400-2483.5 MHz 4 2427 10 2457 5 2432 11 2462 6 2437 Sporton International (Kunshan) Inc. Page Number : 8 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 2.2 Test Mode Final test modes are considering the modulation and worse data rates as below table. MIMO Antenna Modulation Data Rate 802.11b 1 Mbps 802.11g 6 Mbps 802.11n HT20 MCS0 802.11n HT40 MCS0 Test Cases AC Conducted Mode 1 : Bluetooth Link + WLAN Link (2.4G) + Adapter + Earphone Emission Remark: For Radiated Test Cases, The tests were performance with Adapter. Sporton International (Kunshan) Inc. Page Number : 9 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 2.3 Connection Diagram of Test System 2.4 Support Unit used in test configuration and system Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. WLAN AP LINKSYS WRT600N Q87-WRT600NV11 N/A Unshielded, 1.8 m Bluetooth 2. Lenovo LBH308 N/A N/A N/A Earphone 3. Earphone Lenovo LH102 N/A N/A Unshielded,1.2m Sporton International (Kunshan) Inc. Page Number : 10 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 2.5 EUT Operation Test Setup For WLAN RF test items, an engineering test program was provided and enabled to make EUT continuous transmit/receive. For AC power line conducted emissions, the EUT was set to connect with the Notebook under large package sizes transmission. 2.6 Measurement Results Explanation Example For all conducted test items: The offset level is set in the spectrum analyzer to compensate the RF cable loss between EUT conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level is exactly the EUT RF output level. Example: The spectrum analyzer offset is derived from RF cable loss. Offset = RF cable loss. Following shows an offset computation example with cable loss 4.8 dB. Offset(dB) = RF cable loss(dB) . = 4.8 (dB) Sporton International (Kunshan) Inc. Page Number : 11 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 3 Test Result 3.1 6dB and 99% Bandwidth Measurement 3.1.1 Limit of 6dB and 99% Bandwidth The minimum 6 dB bandwidth shall be at least 500 kHz. 3.1.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.1.3 Test Procedures 1. The testing follows ANSI C63.10-2013 clause 11.8 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Make the measurement with the spectrum analyzer's resolution bandwidth (RBW) = 100 kHz. Set the Video bandwidth (VBW) = 300 kHz. In order to make an accurate measurement. The 6 dB bandwidth must be greater than 500 kHz. 5. For 99% Bandwidth Measurement, the spectrum analyzer's resolution bandwidth (RBW) = 1MHz and set the Video bandwidth (VBW) = 3MHz. 6. Measure and record the results in the test report. 3.1.4 Test Setup Sporton International (Kunshan) Inc. Page Number : 12 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 3.1.5 Test Result of 6dB and 99% Occupied Bandwidth Please refer to Appendix A. Minimum 6dB Bandwidth Maximum 99% Occupied Bandwidth Note : The occupied channel bandwidth is maintained within the band of operation for all of the modulations. Sporton International (Kunshan) Inc. Page Number : 13 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 3.2 Output Power Measurement 3.2.1 Limit of Output Power For systems using digital modulation in the 2400-2483.5MHz, the limit for peak output power is 30dBm. If transmitting antenna with directional gain greater than 6dBi is used, the peak output power from the intentional radiator shall be reduced below the above stated value by the amount in dB that the directional gain of the antenna exceeds 6 dBi. In case of point-to-point operation, the limit has to be reduced by 1dB for every 3dB that the directional gain of the antenna exceeds 6dBi. 3.2.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.2.3 Test Procedures 1. The testing follows the Measurement Procedure of ANSI C63.10-2013 clause 11.9.1.3 PKPM1 Peak power meter method. 2. The RF output of EUT was connected to the power meter by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Measure the conducted output power and record the results in the test report. 5. For MIMO mode, calculation method follows FCC KDB 662911 D01 Multiple Transmitter Output v02r01. 3.2.4 Test Setup 3.2.5 Test Result of Peak Output Power Please refer to Appendix A. 3.2.6 Test Result of Average output Power (Reporting Only) Please refer to Appendix A. Sporton International (Kunshan) Inc. Page Number : 14 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 3.3 Power Spectral Density Measurement 3.3.1 Limit of Power Spectral Density The peak power spectral density shall not be greater than 8dBm in any 3kHz band at any time interval of continuous transmission. 3.3.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.3.3 Test Procedures 1. The testing follows Measurement Procedure of ANSI C63.10-2013 clause 11.10.2 Method PKPSD. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Make the measurement with the spectrum analyzer's resolution bandwidth (RBW) = 3 kHz. Video bandwidth VBW = 10 kHz In order to make an accurate measurement, set the span to 1.5 times DTS Channel Bandwidth. (6dB BW) 5. Detector = peak, Sweep time = auto couple, Trace mode = max hold, Allow trace to fully stabilize. Use the peak marker function to determine the maximum power level. 6. Measure and record the results in the test report. 7. For MIMO mode, calculation method follows FCC KDB 662911 D01 Multiple Transmitter Output v02r01. If measurements performed using method (2) plus 10 log (N) exceeds the emission limit, the test should choose method (1) before declaring that the device fails the emission limit. Method (1): Measure and sum the spectra across the outputs. The total final Power Spectral Density is from a device with 2 transmitter outputs. The spectrum measurements of the individual outputs are all performed with the same span and number of points, the spectrum value in the first spectral bin of output 1 is summed with that in the first spectral bin of output 2 to obtain the value for the first frequency bin of the summed spectrum. Method (2): Measure and add 10 log (N) dB, where N is the number of outputs. (N=2) Sporton International (Kunshan) Inc. Page Number : 15 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 3.3.4 Test Setup 3.3.5 Test Result of Power Spectral Density Please refer to Appendix A. Worst Case Power Density (dBm/3kHz) Sporton International (Kunshan) Inc. Page Number : 16 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 3.4 Conducted Band Edges and Spurious Emission Measurement 3.4.1 Limit of Conducted Band Edges and Spurious Emission Measurement In any 100 kHz bandwidth outside of the authorized frequency band, the emissions which fall in the non-restricted bands shall be attenuated at least 20 dB / 30dB relative to the maximum PSD level in 100 kHz by RF conducted measurement. 3.4.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.4.3 Test Procedures 1. The testing follows ANSI C63.10-2013 clause 11.13 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Set RBW = 100 kHz, VBW=300 kHz, Peak Detector. Unwanted Emissions measured in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz when maximum peak conducted output power procedure is used. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20 dB per 15.247(d). 5. Measure and record the results in the test report. 6. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 3.4.4 Test Setup Sporton International (Kunshan) Inc. Page Number : 17 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C 3.4.5 Test Result of Conducted Band Edges and Spurious Emission Temperature : 21~25℃ Test Engineer : Weller Liu Relative Humidity : 51~55% Number of TX = 2, Ant. 1 (Measured) Test Mode : 802.11b Test Channel : 01 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 18 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11b Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 19 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11b Test Channel : 11 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 20 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11g Test Channel : 01 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 21 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11g Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 22 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11g Test Channel : 11 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 23 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11n HT20 Test Channel : 01 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 24 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11n HT20 Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 25 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11n HT20 Test Channel : 11 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 26 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11n HT40 Test Channel : 03 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 27 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11n HT40 Test Channel : 06 100kHz PSD reference Level Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 28 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Test Mode : 802.11n HT40 Test Channel : 09 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 29 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0

FCC RF Test Report Report No. : FR931313C Number of TX = 2, Ant. 2 (Measured) Test Mode : 802.11b Test Channel : 01 100kHz PSD reference Level Channel Plot Spurious Emission 30MHz~3GHz Spurious Emission 2GHz~25GHz Sporton International (Kunshan) Inc. Page Number : 30 of 50 TEL : 86-512-57900158 Report Issued Date : Apr. 28, 2019 FAX : 86-512-57900958 Report Version : Rev. 01 FCC ID: XMR201905SC66MW Report Template No.: BU5-FR15CWL AC MA Version 2.0


Document Created: 2019-05-06 15:11:18
Document Modified: 2019-05-06 15:11:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC