MPE

FCC ID: XMR201902M66

RF Exposure Info

Download: PDF
FCCID_4176168

7A S /4 be T erssas&R ZArANS (AccrEDITED) nlulubsS® No. 3857.01 MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd. FCC ID XMR201902M66 Product GSM/GPRS Module Brand Quectel Model M66 Marketing Quectel M66 Report No. R1901A0009—Mi1R1 Issue Date February 15, 2019 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved by: Songyan Fan Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86—021—50791141/2/3 FAX: +86—021—50791141/2/3—8000

Q} MPE Test Report Report No: R1901A0009—M1R1 Table of Contents 1 T@St L@DOFAIOTY .............cscceeeeeeeeereereereereer en en e en en en en en en en en en en en en en eereeneeereereeneeneeneeneeneeenevneen en 3 1.1 NOf@S Of th@ T@St R@DOTt...............c.ceeeeeeeeerereereereereereerreereereereereereereeereereereereereer en en erneenene. 3 1.2 Test facility ... 1.3 Testing Location............ 1.4 L@BOTAIOTY ENViFONM@NE...........l.csceceeeeeeememeereereereereereenreereereereereereereeereereereereereereereeneeeneeneees 4 2 Description of EquipMent UNG@r TeSt....................ccccccmr mss 3 Maximum conducted output power (measured) and antenna Gain .... 4 TeSt R@SUIt ... ANNEX A: The EUT Appearance A.1 EUT Appearance ...................... TA Technology (Shanghai) Co., Ltd. Page 2 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

Q} MPE Test Report Report No: R1901A0009—M1R1 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test facility CNAS (accreditation number:L2264) TA Technology (Shanghai) Co., Ltd. has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS). FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. IC (recognition number is 8510A) TA Technology (Shanghai) Co., Ltd. has been listed by industry Canada to perform electromagnetic emission measurement. VCCI (recognition number is C—4595, T—2154, R—4113, G—10766) TA Technology (Shanghai) Co., Ltd. has been listed by industry Japan to perform electromagnetic emission measurement. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. TA Technology (Shanghai) Co., Ltd. Page 3 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

C MPE Test Report Report No: R1901A0009—M1R1 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86—021—50791141/2/3 Fax: +86—021—50791141/2/3—8000 Website: http:/www.ta—shanghai.com E—mail: xukai@ta—shanghai.com 1.4 Laboratory Environment Temperature Min. = 18°C, Max. = 25 °C Relative humidity Min. = 30%, Max. = 70% Ground system resistance <0.5 Q Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. TA Technology (Shanghai) Co., Ltd. Page 4 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

C MPE Test Report Report No: R1901A0009—M1R1 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Applicant address Shanghai 200233, China Manufacturer Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Manufacturer address Shanghai 200233, China General Technologies Model M6é6 IMEI 867322039990304 Hardware Version R1.0 Software Version MéGFARO1A12BT Date of Testing: January 9, 2019~ February 2, 2019 TA Technology (Shanghai) Co., Ltd. Page 5 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

C MPE Test Report Report No: R1901A0009—M1R1 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10*(@ntenna gain/10) Band Burst Turn up Division Time—Averaged Tune up Power(dBm) Factors (dB) Power (dBm) GSM 33.50 —9.03 24.47 1 Txslot 33.50 —9.03 24.47 GSM 850 2 Txslots 33.00 —6.02 26.98 GPRS 3 Txslots 32.00 —4.26 27.74 4 Txslots 31.00 —3.01 27.99 GSM 31.00 —9.03 21.97 1 Txslot 31.00 —9.03 21.97 GSM 1900 2 Txslots 30.00 —6.02 23.98 GPRS 3 Txslots 30.00 —4.26 25.74 4 Txslots 30.00 —3.01 26.99 Note: Division Factors To average the power, the division factor is as follows: 1Txslot = 1 transmit time slot out of 8 time slots => conducted power divided by (8/1) => —9.03 dB 2Txslots = 2 transmit time slots out of 8 time slots => conducted power divided by (8/2) => —6.02 dB 3Txslots = 3 transmit time slots out of 8 time slots => conducted power divided by (8/3) => —4.26 dB 4Txslots = 4 transmit time slots out of 8 time slots => conducted power divided by (8/4) => —3.01 dB Maximum Conducted Output Power (dBm) Band (dBm) (mW) GSM850 27.990 629.506 GSM 1900 26.990 500.035 Band Maximum Conducted Output Antenna Gain N . . an umeric gain Power (dBm) (dBi) o Bluetooth 8.000 6.310 1.960 1.570 TA Technology (Shanghai) Co., Ltd. Page 6 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

C MPE Test Report Report No: R1901A0009—M1R1 4 Test Result According to section 1.1310 of FCC 47 CFR Part 1, limits for maximum permissible exposure (MPE) are as following TABLE 1—LIMITS FOR MAXIMUN PERMISSIBLE EXPOSURE (MPE] Frequency Range Electric Field Magnetic Field Power Density Averaging Time (MHz) Strength Strength (v/m) (A)m) (m¥¥/emn2) (minutes) (&) Limits for Occupational/Controlled Exposures WScoremmmcen 614 1.63 *(100) 6 BAE mmumrmemuci 18427 4.89/f *(900/2) 6 BEe BBR aremimrancant 61.4 0.163 1.0 6 BB ABHEE mmmmemmer| rrmemrmamen £300 6 SSAMADRAAAeommeriocontram | en 5 6 (6) Limits for General Population/Uncontrolled Exposure CL31.34 ... 614 1.63 *(100) 30 1.34—30 ... .222 824/f 2.19/f *(180/f2) 30 30—300 ... 27 5 0.073 0.2 30 300—1 500 22. .cs cce es #1500 30 1500—100,000 .2 .000 copoccceecree memerrreer e 1.0 30 t =frequency in MHz + = Plane—wave equivalent power density Note1. Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational / controlled limits apply provided he or she is made aware of the potential for exposure. Note2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. TA Technology (Shanghai) Co., Ltd. Page 7 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

Q} MPE Test Report Report No: R1901A0009—M1R1 The maximum permissible exposure for 300~1500 MHz is £/1500, for 1500~100,000MHz is 1.0.So Band The maximum permissible exposure GSM850 0.55mW/cm?" GSM1900 1.0mWicm? Bluetooth 1.0mWicm? TA Technology (Shanghai) Co., Ltd. Page 8 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

C MPE Test Report Report No: R1901A0009—M1R1 Maximum Conducted EIRP Power density Limit Band z;]utuZte limit Margin1 Margin2 Final Power P (dBm) (dB) (mW/cm?) (dBm) (dB) Margin (dBm) (dB) GSM3850 27.990 40.600 12.610 0.548 34.401 6.411 6.411 GSM1900 26.990 33.000 6.010 0.998 37.004 10.014 6.010 Note: 1. The Maximum allowed antenna gain per Band should be less than or equal to the Final Margin which is the allowable maximum gain value to comply with limits for maximum permissible exposure (MPE). 2. The Final Margin is determined and selected to the worst—case of Margin1 and Margin2. 3. Margin1=EIRP Limit(dBm)—Maximum Conducted Power (dBm). EIRP limit reference standard part22/ part24/part2 7and part90 for each band, EIRP = ERP + 2.15 (dB). 4. Margin2=Power density Limit(dBm)—Maximum Conducted Power (dBm). Power density Limit(dBm): The max. obtained by MPE with 20cm. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co—located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user‘s authority to operate the device. TA Technology (Shanghai) Co., Ltd. Page 9 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

Q} MPE Test Report Report No: R1901A0009—M1R1 RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided. This calculation is based on the conducted power, considering maximum power and antenna gain. The formula shown in KDB 447498 D01 is used in the calculation. Equation from KDB 447498 D01 General RF Exposure Guidance v06 (10/23/2015) is: s= PG /4R‘ Where: S = power density (in appropriate units, e.g. mW/cmz) P = Time—average maximum tune up procedure (in appropriate units, e.g., mW) G = the numeric gain of the antenna R = distance to the center of radiation of the antenna (20 cm = limit for MPE) Test Result Limit Val The MPE Band PG (mW) CS esg imit va lzje © . Conclusion ({mW/cm ) ({mW/cm ) ratio GSM3850 2754.863 0.548 0.550 0.998 Pass GSM1900 1995.262 0.397 1.000 0.397 Pass Bluetooth 9.908 0.002 1.000 0.002 Pass Note: R = 20cm [|= 3.1416 The MPE ratio = Mac Test Result<~Limit Value So the simultaneous transmitting antenna pairs as below: >of MPE ratios= GSM850 + BT=0.998+0.002=1 Note: For transmitters, minimum separation distance is 20cm, even if calculations indicate MPE distance is less. TA Technology (Shanghai) Co., Ltd. Page 10 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

Q} MPE Test Report Report No: R1901A0008—M1R1 ANNEX A: The EUT Appearance A.1 EUT Appearance SN:MPA18IE360001 25 IMEI:86732203999030 ANATEL:O P BB P P. . P P P P P P P P TA Technology (Shanghai) Co., Ltd. Page 11 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

Q} MPE Test Report Report No: R1901A0008—M1R1 a: EUT Picture 1 EUT TA Technology (Shanghai) Co., Ltd. Page 12 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.


Document Created: 2019-03-23 04:27:03
Document Modified: 2019-03-23 04:27:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC