MPE

FCC ID: XMR201808BC66

RF Exposure Info

Download: PDF
FCCID_4083666

MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR201808BC66 Product NB_IoT Module Brand Quectel Model BC66 Report No. R1809A0442-M1 Issue Date November 16, 2018 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Jiangpeng Lan Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000

MPE Test Report Report No: R1809A0442-M1 Table of Contents 1 Test Laboratory............................................................................................................................... 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2 Test facility .............................................................................................................................. 3 1.3 Testing Location ...................................................................................................................... 4 1.4 Laboratory Environment .......................................................................................................... 4 2 Description of Equipment under Test .............................................................................................. 5 3 Maximum conducted output power (measured) and antenna Gain ................................................ 6 TA Technology (Shanghai) Co., Ltd. Page 2 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1809A0442-M1 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test facility CNAS (accreditation number:L2264) TA Technology (Shanghai) Co., Ltd. has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS). FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. IC (recognition number is 8510A) TA Technology (Shanghai) Co., Ltd. has been listed by industry Canada to perform electromagnetic emission measurement. VCCI (recognition number is C-4595, T-2154, R-4113, G-10766) TA Technology (Shanghai) Co., Ltd. has been listed by industry Japan to perform electromagnetic emission measurement. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. TA Technology (Shanghai) Co., Ltd. Page 3 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1809A0442-M1 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: xukai@ta-shanghai.com 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25 C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. TA Technology (Shanghai) Co., Ltd. Page 4 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1809A0442-M1 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Applicant address Shanghai 200233, China Manufacturer Quectel Wireless Solutions Co., Ltd 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Manufacturer address Shanghai 200233, China General Technologies Model BC66 IMEI 867997030054273 Hardware Version R1.0 Software Version BC66NBR01A06 Date of Testing: October 29, 2018 ~ November 12, 2018 TA Technology (Shanghai) Co., Ltd. Page 5 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1809A0442-M1 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Maximum Conducted Output Power (dBm) Band (dBm) (mW) NB-IOT Band 2 25.00 316.23 NB-IOT Band 4 25.00 316.23 NB-IOT Band 5 25.00 316.23 NB-IOT Band 12 25.00 316.23 NB-IOT Band 13 25.00 316.23 NB-IOT Band 17 25.00 316.23 NB-IOT Band 25 25.00 316.23 NB-IOT Band 66 25.00 316.23 TA Technology (Shanghai) Co., Ltd. Page 6 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1809A0442-M1 4 Test Result According to section 1.1310 of FCC 47 CFR Part 1, limits for maximum permissible exposure (MPE) are as following Note1. Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational / controlled limits apply provided he or she is made aware of the potential for exposure. Note2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. TA Technology (Shanghai) Co., Ltd. Page 7 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1809A0442-M1 The maximum permissible exposure for 300~1500 MHz is f/1500, for 1500~100,000MHz is 1.0.So Band The maximum permissible exposure NB-IOT Band 2 1.00mW/cm2 NB-IOT Band 4 1.00mW/cm2 NB-IOT Band 5 0.55mW/cm2 NB-IOT Band 12 0.47mW/cm2 NB-IOT Band 13 0.52mW/cm2 NB-IOT Band 17 0.47mW/cm2 NB-IOT Band 25 1.00mW/cm2 NB-IOT Band 66 1.00mW/cm2 Maximum Power density Limit EIRP Conducted Margin1 Margin2 Final Band limit Output (dB) (dB) Margin (dBm) (mW/cm2) (dBm) Power (dBm) (dB) NB-IOT Band 2 25.00 33.00 8.00 1.00 37.01 12.01 8.00 NB-IOT Band 4 25.00 30.00 5.00 1.00 37.01 12.01 5.00 NB-IOT Band 5 25.00 40.60 15.60 0.55 34.42 9.42 9.42 NB-IOT Band 12 25.00 36.92 11.92 0.47 33.73 8.73 8.73 NB-IOT Band 13 25.00 36.92 11.92 0.52 34.17 9.17 9.17 NB-IOT Band 17 25.00 34.77 9.77 0.47 33.73 8.73 8.73 NB-IOT Band 25 25.00 33.00 8.00 1.00 37.01 12.01 8.00 NB-IOT Band 66 25.00 30.00 5.00 1.00 37.01 12.01 5.00 Note: 1. The Maximum allowed antenna gain per Band should be less than or equal to the Final Margin. 2. The Final Margin is determined and selected to the worst-case of Margin1 and Margin2. 3. Margin1=EIRP Limit(dBm)-Maximum Conducted Power (dBm). EIRP limit reference standard part22, part24 and part27 for each band, EIRP = ERP + 2.15 (dB). 4. Margin2=Power density Limit(dBm)-Maximum Conducted Power (dBm). Power density Limit(dBm): The max. obtained by MPE with 20cm. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna TA Technology (Shanghai) Co., Ltd. Page 8 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1809A0442-M1 or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided. This calculation is based on the conducted power, considering maximum power and antenna gain. The formula shown in KDB 447498 D01 is used in the calculation. Equation from KDB 447498 D01 General RF Exposure Guidance v06 (10/23/2015) is: 2 S= PG / 4∏R 2 Where: S = power density (in appropriate units, e.g. mW/cm ) P = Time-average maximum tune up procedure (in appropriate units, e.g., mW) G = the numeric gain of the antenna R = distance to the center of radiation of the antenna (20 cm = limit for MPE) Test Result Limit Value Band PG (mW) 2 2 Conclusion (mW/cm ) (mW/cm ) NB-IOT Band 2 1995.26 0.40 1.00 Pass NB-IOT Band 4 1000.00 0.20 1.00 Pass NB-IOT Band 5 2766.94 0.55 0.55 Pass NB-IOT Band 12 2360.48 0.47 0.47 Pass NB-IOT Band 13 2612.16 0.52 0.52 Pass NB-IOT Band 17 2360.48 0.47 0.47 Pass NB-IOT Band 25 1995.26 0.40 1.00 Pass NB-IOT Band 66 1000.00 0.20 1.00 Pass Note: R = 20cm ∏= 3.1416 Note: For transmitters, minimum separation distance is 20cm, even if calculations indicate MPE distance is less. TA Technology (Shanghai) Co., Ltd. Page 9 of 9 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.


Document Created: 2019-03-27 15:31:02
Document Modified: 2019-03-27 15:31:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC