Modular Approval Request

FCC ID: XMR201808BC66

Cover Letter(s)

Download: PDF
FCCID_4083663

Quectel Wireless Solutions Company Limited Declaration of the Modular Approval Applicant / Grantee Quectel Wireless Solutions Company Limited FCC ID: XMR201808BC66 Model: BC66 The single module transmitter has been evaluated then tested meeting the requirements under Part 15C Section 212 as below: Modular approval requirement EUT Condition Com ply (a) The radio elements of the modular transmitter must have The radio elements of the modular YES their own shielding. The physical crystal and tuning transmitter have their own shielding. capacitors may be located external to the shielded radio elements. (b) The modular transmitter must have The modular has buffered data inputs, it is YES buffered modulation/data inputs (if such inputs are integrated in chip. Please see provided) to ensure that the module will comply with part schematic.pdf 15 requirements under conditions of excessive data rates or over-modulation. (c)The modular transmitter must have its All power lines derived from the host YES own powersupply regulation. device are regulated before energizing other circuits internal to the BC66. Please see schematic.pdf (d) The modular transmitter must comply A permanently attached antenna or unique Not with the antenna and transmission system requirements of antenna connector is not a requirement for Applic Sections 15.203, 15.204(b) and 15.204(c). The antenna licensed modules. able must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. (e)The modular transmitter must be tested The BC66 was tested in a stand‐alone YES in a stand-alone configuration, i.e., the module must not be configuration via a PCMCIA extender. inside another device during testing for compliance with Please see conducted set‐up photo.pdf part 15 requirements. Unless the transmitter module will be and spurious set‐up battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these

Quecctel Wireless Solu utions Co ompany Limited liines shall be the lengthh typical of actual use or, if that leength is unkknown, at le east 10 centtimeters to innsure that thhere is no coupling c betw ween the caase of the module and s supporting e equipment. A Any accessories, peripherals, or s support equip pment conne ected to the module duriing testing s shall be unnmodified and commerrcially availa able (see S Section 1 15.31(i))must tnotbeinsidea anotherdevicceduringtesting. (f)Th he mo odular transmitter must be The label po osition of BC C66 is clearly y YE ES equipped with w either a p permanently affixed label or must indicated. Iff the FCC ID of the modu ule be capable e of electtronically displaying d itts FCC identification n number. cannot be seen s when it is installed, then t the host lab bel must inclu ude the text: Contains FC CC ID: XMR2 201808BC66 6. Please see the label.pdff (g) The modula ar transmitterr must comply The BC66 is s compliant w with all appliccable ES YE with any specific rules or o operating requirements r s that FCC rules. Detail instrucctions are giv ven in pply to a com ordinarily ap mplete transm mitter and the e the User Ma anual. manufacture er must proviide adequate e instructionss along with the mod dule to expla ain any suchrrequirementss. A copy ed in the application for of these insttructions musst be include equipmentauthorizationrrequirementss,whichareba asedonthei ntendeduse//configuratio ons. (h)The modular transmitter t m must comply The BC66 is s approved tto comply witth the YE ES w any appllicable RF exxposure requ with uirements in its final applicable RF R exposure requirementt, c configuration . please see the MPE eva aluation with 20cm as the distance restrictio on. Dated 2018/111/16 By: Johnny Xiang Sign nature Pri rinted Title: Project Manager M On beh half of : (Quectell Wirele ess Solutions Limited) Telephone: +86-2 2150086326 6-800


Document Created: 2018-11-16 15:59:45
Document Modified: 2018-11-16 15:59:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC