Test Report

FCC ID: XLY-DP700

Test Report

Download: PDF
FCCID_4170305

Page 1 of 27 Report No.: S19010703501001 FCC RADIO TEST REPORT FCC ID: XLY-DP700 SMART CARD READER/WRITER FOR Product： RFID SYSTEM Trade Mark： ZEPHYR LOCK Model Name： DP700S Family Model： N/A Report No.： S19010703501001 Prepared for Zephyrlock,LLC 14 Finance Drive Danbury, CT United States 06810 Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn

Page 2 of 27 Report No.: S19010703501001 TEST RESULT CERTIFICATION Applicant’s name ................. : Zephyrlock,LLC Address ................................. : 14 Finance Drive Danbury, CT United States 06810 Manufacturer's Name .......... : Dongguan TonXon Intelligent Technology Co.,Ltd. Address ................................. : Linwuzhou, Shayao Management District, Shijie Town, Dongguan City, Guangdong Province, China Product description Product name ........................... : SMART CARD READER/WRITER FOR RFID SYSTEM Model and/or type reference : DP700S Family Model： N/A Standards ............................. : FCC Part15.225 Test procedure ...............................ANSI : C63.10-2013 This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personnel only, and shall be noted in the revision of the document. Date of Test ............................................ : Date (s) of performance of tests ............. : 08 Jan. 2019 ~ 26 Jan. 2019 Date of Issue ........................................... : 26 Jan. 2019 Test Result ............................................... : Pass Testing Engineer : (Allen Liu) Technical Manager : (Jason Chen) Authorized Signatory : (Sam Chen) `

Page 3 of 27 Report No.: S19010703501001 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 TEST FACILITY 5 1.2 MEASUREMENT UNCERTAINTY 5 2 . GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 DESCRIPTION OF TEST MODES 7 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3 . ANTENNA REQUIREMENT 11 3.1 STANDARD REQUIREMENT 11 3.2 EUT ANTENNA 11 4 . EMC EMISSION TEST 12 4.1 CONDUCTED EMISSION MEASUREMENT 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 4.1.2 TEST CONFIGURATION 12 4.1.3 TEST PROCEDURE 12 4.1.4 TEST RESULT 13 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 TEST PROCEDURE 18 4.2.3 DEVIATION FROM TEST STANDARD 18 4.2.4 TEST SETUP 19 4.2.5 TEST RESULTS (BELOW 30MHZ) 20 4.2.6 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 22 5 . BANDWIDTH TEST 24 5.1 TEST PROCEDURE 24 5.2 DEVIATION FROM STANDARD 24 5.3 TEST SETUP 24 5.4 TEST RESULTS 25 6. FREQUENCY TOLERANCE 26 `

Page 4 of 27 Report No.: S19010703501001 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.225) Standard Test Item Judgment Remark Section 15.207 Conducted Emission Pass 15.205(a) 15.209 Radiated Spurious Emission Pass 15.225 15.225 20dB Bandwidth Pass 15.225 Frequency Tolerance Pass 15.203 Antenna Requirement Pass NOTE: (1) ” N/A” denotes test is not applicable in this Test Report. `

Page 5 of 27 Report No.: S19010703501001 1.1 TEST FACILITY All measurement facilities used to collect the measurement data are located at 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen 518126 P.R. China. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR Publication 22. Site Description CNAS-Lab. : The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L5516. IC-Registration The Certificate Registration Number is 9270A-1. FCC- Accredited Test Firm Registration Number: 463705. Designation Number: CN1184 A2LA-Lab. The Certificate Registration Number is 4298.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Name of Firm : Shenzhen NTEK Testing Technology Co., Ltd. Site Location : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen 518126 P.R. China. 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% `

Page 6 of 27 Report No.: S19010703501001 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment SMART CARD READER/WRITER FOR RFID SYSTEM Trade Mark ZEPHYR LOCK Model Name DP700S Family Model N/A Model Difference N/A The EUT is a SMART CARD READER/WRITER FOR RFID SYSTEM Operation Frequency: 13.56MHz Product Description Modulation Type: ASK Number Of Channel 1CH. Antenna Designation: Loop Antenna Antenna Gain(Peak) 0 dBi Adapter N/A Battery N/A Rating DC 5V from USB Port. HW Version V2.1 SW Version V3.6 Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Table for Filed Antenna Ant Brand Model Name Antenna Type Connector Gain (dBi) NOTE . 1 N/A N/A Loop Antenna N/A 0 Antenna `

Page 7 of 27 Report No.: S19010703501001 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 TX-13.56MHz For Conducted Emission Final Test Mode Description Mode 1 TX-13.56MHz For Radiated Emission Final Test Mode Description Mode 1 TX-13.56MHz `

Page 8 of 27 Report No.: S19010703501001 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED For AC Conducted Emission Mode AC PLUG C-2 C-1 AE-2 EUT Notebook AE-1 Adapter e For Radiated Test Cases AC PLUG C-2 C-1 AE-2 EUT Notebook AE-1 Adapter e For Conducted Test Cases AC PLUG C-3 Measurement C-2 C-1 AE-1 AE-2 Instrument EUT Notebook Adapter e Note:The temporary antenna connector is soldered on the PCB board in order to perform conducted tests and this temporary antenna connector is listed in the equipment list. `

Page 9 of 27 Report No.: S19010703501001 2.4 DESCRIPTION OF SUPPORT UNITS (CONDUCTED MODE) The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item Equipment Brand Model/Type No. Series No. Note AE-1 Adapter N/A N/A N/A AE-2 Notebook Lenovo Thinkpad Edge E430 N/A Item Shielded Type Ferrite Core Length Note C-1 NO YES 1.2m C-2 NO YES 1.0m C-3 YES NO 0.1m Note: (1) The support equipment was authorized by Declaration of Confirmation. (2) For detachable type I/O cable should be specified the length in cm in『Length』column. `

Page 10 of 27 Report No.: S19010703501001 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS Radiation& Conducted Test equipment Calibrati Kind of Last Calibrated Item Manufacturer Type No. Serial No. on Equipment calibration until period Spectrum 1 Aglient E4407B MY45108040 2018.05.19 2019.05.18 1 year Analyzer Spectrum 2 Agilent N9020A MY49100060 2018.10.08 2019.10.04 1 year Analyzer Spectrum 3 R&S FSV40 101417 2018.10.08 2019.10.04 1 year Analyzer 4 Test Receiver R&S ESPI7 101318 2018.05.19 2019.05.18 1 year 5 Bilog Antenna TESEQ CBL6111D 31216 2018.04.08 2019.04.07 1 year 50Ω Coaxial 6 Anritsu MP59B 6200983705 2018.05.19 2020.05.18 3 year Switch EM-AH-1018 7 Horn Antenna EM 2011071402 2018.04.08 2019.04.07 1 year 0 Active Loop SCHWARZBE FMZB 1519 8 055 2018.11.03 2019.11.02 1 year Antenna CK B 9 LF Cable N/A R-03 N/A 2018.06.05 2021.06.05 3 year PSG Analog 10 Signal Agilent E8257D MY51110112 2018.08.05 2019.08.04 1 year Generator Test Cable 11 N/A R-01 N/A 2017.04.21 2020.04.20 3 year (9KHz-30MHz) Test Cable 12 N/A R-02 N/A 2017.04.21 2020.04.20 3 year (30MHz-1GHz) Note: 1.We will use the temporary antenna connector (soldered on the PCB board) When conducted test And this temporary antenna connector is listed within the instrument list 2. Each piece of equipment is scheduled for calibration once a year except the Test Cable& Aux Equipment which is scheduled for calibration every 3 years. `

Page 11 of 27 Report No.: S19010703501001 3. ANTENNA REQUIREMENT 3.1 STANDARD REQUIREMENT 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 3.2 EUT ANTENNA The EUT antenna is permanent attached antenna. It comply with the standard requirement. `

Page 12 of 27 Report No.: S19010703501001 4. EMC EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 POWER LINE CONDUCTED EMISSION Limits (Frequency Range 150KHz-30MHz) Conducted Emission Limit Frequency(MHz) Quasi-peak Average 0.15-0.5 66-56* 56-46* 0.5-5.0 56 46 5.0-30.0 60 50 Note: 1. *Decreases with the logarithm of the frequency 2. The lower limit shall apply at the transition frequencies 3. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.1.2 TEST CONFIGURATION Reference Ground EUT Auxiliary Reference Equipment Ground EMI Receiver 50Ω 80cm 80cm LISN LISN 4.1.3 TEST PROCEDURE According to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 Conducted emissions the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode. 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room. 2. The EUT was placed on a table which is 0.8m above ground plane. 3. Connect EUT to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. 4. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40cm long. 5. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. 6. LISN at least 80 cm from nearest part of EUT chassis. 7. The frequency range from 150KHz to 30MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth(IF bandwidth=9KHz) with Maximum Hold Mode 9. For the actual test configuration, please refer to the related Item –EUT Test Photos. `

Page 13 of 27 Report No.: S19010703501001 4.1.4 TEST RESULT SMART CARD EUT： READER/WRITER FOR RFID Model Name ： DP700S SYSTEM Temperature： 26 ℃ Relative Humidity： 54% Pressure： 1010hPa Phase : L Test Voltage ： DC 5V from PC AC 120V/60Hz Test Mode： Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.1539 43.26 9.75 53.01 65.78 -12.77 QP 0.1539 14.47 9.75 24.22 55.78 -31.56 AVG 0.4939 35.09 9.74 44.83 56.10 -11.27 QP 0.4939 28.88 9.74 38.62 46.10 -7.48 AVG 0.8860 23.11 9.74 32.85 56.00 -23.15 QP 0.8860 15.15 9.74 24.89 46.00 -21.11 AVG 3.0099 24.34 9.83 34.17 56.00 -21.83 QP 3.0099 13.00 9.83 22.83 46.00 -23.17 AVG 13.5618 36.34 10.07 46.41 60.00 -13.59 QP 13.5618 33.06 10.07 43.13 50.00 -6.87 AVG 27.1219 36.52 10.59 47.11 60.00 -12.89 QP 27.1219 35.78 10.59 46.37 50.00 -3.63 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. `

Page 14 of 27 Report No.: S19010703501001 SMART CARD READER/WRITER EUT： Model Name ： DP700S FOR RFID SYSTEM Temperature： 26 ℃ Relative Humidity： 54% Pressure： 1010hPa Phase : N Test Voltage ： DC 5V from PC AC 120V/60Hz Test Mode： Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.1580 44.08 9.74 53.82 65.56 -11.74 QP 0.1580 16.12 9.74 25.86 55.56 -29.70 AVG 0.4859 36.04 9.75 45.79 56.24 -10.45 QP 0.4859 31.65 9.75 41.40 46.24 -4.84 AVG 1.0140 20.73 9.75 30.48 56.00 -25.52 QP 1.0140 14.04 9.75 23.79 46.00 -22.21 AVG 1.4819 21.46 9.77 31.23 56.00 -24.77 QP 1.4819 11.61 9.77 21.38 46.00 -24.62 AVG 13.5618 34.59 10.07 44.66 60.00 -15.34 QP 13.5618 32.27 10.07 42.34 50.00 -7.66 AVG 27.1219 36.46 10.56 47.02 60.00 -12.98 QP 27.1219 35.56 10.56 46.12 50.00 -3.88 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. `

Page 15 of 27 Report No.: S19010703501001 SMART CARD READER/WRITER EUT： Model Name ： DP700S FOR RFID SYSTEM Relative Temperature： 26 ℃ 54% Humidity： Pressure： 1010hPa Phase : L Test Voltage ： DC 5V from PC AC 240V/60Hz Test Mode： Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.4860 35.83 9.74 45.57 56.24 -10.67 QP 0.4860 34.13 9.74 43.87 46.24 -2.37 AVG 0.5220 32.51 9.74 42.25 56.00 -13.75 QP 0.5220 28.28 9.74 38.02 46.00 -7.98 AVG 1.1539 27.21 9.74 36.95 56.00 -19.05 QP 1.1539 15.37 9.74 25.11 46.00 -20.89 AVG 3.3140 28.25 9.84 38.09 56.00 -17.91 QP 3.3140 16.51 9.84 26.35 46.00 -19.65 AVG 13.5620 34.55 10.07 44.62 60.00 -15.38 QP 13.5620 32.91 10.07 42.98 50.00 -7.02 AVG 27.1220 37.03 10.59 47.62 60.00 -12.38 QP 27.1220 36.17 10.59 46.76 50.00 -3.24 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. `

Page 16 of 27 Report No.: S19010703501001 SMART CARD READER/WRITER EUT： Model Name ： DP700S FOR RFID SYSTEM Relative Temperature： 26 ℃ 54% Humidity： Pressure： 1010hPa Phase : N Test Voltage ： DC 5V from PC AC 240V/60Hz Test Mode： Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin Remark (MHz) (dBμV) (dB) (dBμV) (dBμV) (dB) 0.4900 36.04 9.75 45.79 56.17 -10.38 QP 0.4900 27.27 9.75 37.02 46.17 -9.15 AVG 0.5220 32.58 9.75 42.33 56.00 -13.67 QP 0.5220 25.58 9.75 35.33 46.00 -10.67 AVG 1.5260 27.12 9.78 36.90 56.00 -19.10 QP 1.5260 16.91 9.78 26.69 46.00 -19.31 AVG 3.3140 25.14 9.89 35.03 56.00 -20.97 QP 3.3140 18.23 9.89 28.12 46.00 -17.88 AVG 13.5619 34.04 10.07 44.11 60.00 -15.89 QP 13.5619 32.31 10.07 42.38 50.00 -7.62 AVG 27.1220 37.02 10.56 47.58 60.00 -12.42 QP 27.1220 36.05 10.56 46.61 50.00 -3.39 AVG Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. `

Page 17 of 27 Report No.: S19010703501001 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 Radiated Emission Limits ( FCC 15.209 ) Frequencies Field Strength Measurement Distance (MHz) (micorvolts/meter) (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 Note: (1) The tighter limit applies at the band edges. (2) Emission level (dBuV/m)=20log Emission level (uV/m). LIMITS OF RADIATED EMISSION MEASUREMENT ( FCC 15.225) (a)The field strength of any emissions within the band 13.553-13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters, equal to 104dBuV/m at 3 meters. (b) Within the bands 13.410-13.553 MHz and 13.567-13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters, equal to 74.5dBuV/m at 3 meters. (c) Within the bands 13.110-13.410 MHz and 13.710-14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters, equal to 60.5dBuV/m at 3 meters.. (d) The field strength of any emissions appearing outside of the 13.110-14.010 MHz band shall not exceed the general radiated emission limits in § 15.209. `

Page 18 of 27 Report No.: S19010703501001 Spectrum Parameter Setting Attenuation Auto Start Frequency 1000 MHz Stop Frequency 10th carrier harmonic RB / VB (emission in restricted band) 1MHz / 1MHz for Peak Receiver Parameter Setting Attenuation Auto Start ~ Stop Frequency 9kHz~150kHz / RB 200Hz for QP Start ~ Stop Frequency 150kHz~30MHz / RB 9kHz for QP Start ~ Stop Frequency 30MHz~1000MHz / RB 120kHz for QP 4.2.2 TEST PROCEDURE a. The measuring distance of at 3 m shall be used for measurements at frequency up to 1GHz And above 1GHz, b. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3m meter. The table was rotated 360 degrees to determine the position of the highest radiation. c. The height of the equipment or of the substitution antenna shall be 0.8 m; the height of the test antenna shall vary between 1 m to 4 m. d. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. e. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. f. For the actual test configuration, please refer to the related Item –EUT Test Photos. Note: Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported 4.2.3 DEVIATION FROM TEST STANDARD No deviation `

Page 19 of 27 Report No.: S19010703501001 4.2.4 TEST SETUP （A）Radiated Emission Test-Up Frequency Below 30MHz （B）Radiated Emission Test-Up Frequency 30MHz~1GHz `

Page 20 of 27 Report No.: S19010703501001 4.2.5 TEST RESULTS (BELOW 30MHz) SMART CARD READER/WRITER EUT： Model Name. ： DP700S FOR RFID SYSTEM Relative Temperature： 20 ℃ 54% Humidtity： Pressure： 1010 hPa Test Voltage ： DC 5V Test Mode ： TX-13.56MHz Measurement Plot (Polarity: X): Measurement Result: Pre-scan Level Final Test Level Limit Frequency Margin MaxPeak MaxPeak MaxPeak MHz dB dBuV/m dBuV/m dBuV/m 13.561 71.9 69.8 124.0 54.2 Measurement Plot (Polarity: Y): Measurement Result: Pre-scan Level Final Test Level Limit Frequency Margin MaxPeak MaxPeak MaxPeak MHz dB dBuV/m dBuV/m dBuV/m 13.240 72.8 52.1 80.5 28.4 `

Page 21 of 27 Report No.: S19010703501001 Measurement Plot (Polarity: Z): Measurement Result: Pre-scan Level Final Test Level Limit Frequency Margin MaxPeak MaxPeak MaxPeak MHz dB dBuV/m dBuV/m dBuV/m 13.240 72.3 42.4 80.5 38.1 Spurious emissions at 9kHz~30MHz Measurement Frequency Measurement Frequency results Limits Margin Detector Range results (calculated) dBμV dBμV/m dBμV/m (MHz) (MHz) (dB) @3m &30m @30m 0.490-1.705 1.157 28.45 18.45 26.34 -7.89 QP 1.705-30.0 5.291 21.66 11.66 29.54 -17.88 QP 1.705-30.0 21.654 31.34 21.34 29.54 -8.2 QP Note: field strength@30m= field strength@3m+20log(3/30) `

Page 22 of 27 Report No.: S19010703501001 4.2.6 TEST RESULTS (BETWEEN 30 – 1000 MHZ) SMART CARD EUT： READER/WRITER FOR RFID Model Name ： DP700S SYSTEM Temperature： 20 ℃ Relative Humidity： 54% Pressure： 1010 hPa Test Voltage ： DC 5V Test Mode ： TX Polarization : Horizontal Freq. Reading Factor Measurement Limit Over Detector (MHz) (dBμV/m) (dB) (dBμV/m) (dBμV/m) (dB) 135.51 23.54 13.37 36.91 43.50 -6.59 QP 244.23 20.93 13.83 34.76 46.00 -11.24 QP 312.18 20.33 16.38 36.71 46.00 -9.29 QP 393.47 19.33 19.21 38.54 46.00 -7.46 QP 420.58 19.50 20.32 39.82 46.00 -6.18 QP 979.18 12.00 31.02 43.02 54.00 -10.98 QP Remark: Factor = Antenna Factor + Cable Loss. `

Page 23 of 27 Report No.: S19010703501001 SMART CARD EUT： READER/WRITER FOR RFID Model Name ： DP700S SYSTEM Temperature： 20 ℃ Relative Humidity： 54% Pressure： 1010 hPa Test Voltage ： DC 5V Test Mode ： TX Polarization : Vertical Freq. Reading Factor Measurement Limit Over Detector (MHz) (dBμV/m) (dB) (dBμV/m) (dBμV/m) (dB) 95.09 16.95 11.12 28.07 43.50 -15.43 QP 135.51 26.22 13.37 39.59 43.50 -3.91 QP 150.01 17.91 12.77 30.68 43.50 -12.82 QP 244.23 18.67 13.83 32.50 46.00 -13.50 QP 420.58 17.09 20.32 37.41 46.00 -8.59 QP 952.09 11.64 31.13 42.77 46.00 -3.23 QP Remark: Factor = Antenna Factor + Cable Loss. `

Page 24 of 27 Report No.: S19010703501001 5. BANDWIDTH TEST 5.1 TEST PROCEDURE 1. The transmitter output (antenna port) was connected to the spectrum analyzer in peak mode. 2. 20dB Bandwidth the resolution bandwidth of 1 kHz and the video bandwidth of 1 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 5.2 DEVIATION FROM STANDARD FCC Part15.225 5.3 TEST SETUP `

Page 25 of 27 Report No.: S19010703501001 5.4 TEST RESULTS SMART CARD EUT： READER/WRITER FOR RFID Model Name ： DP700S SYSTEM Temperature： 26 ℃ Relative Humidity： 54% Pressure： 1020 hPa Test Power ： DC 5V Test Mode ： TX Frequency 20 dBc Bandwidth Test Channel (MHz) (kHz) CH01 13.56 3.734 `

Page 26 of 27 Report No.: S19010703501001 6. FREQUENCY TOLERANCE 6.1 Requirement: Test FCC Part15.225 Requirement: Test Method: ANSI C63.4:2003 Requirement: The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating frequency over a temperature variation of –20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 6.2 Test Procedure 1.The EUT was placed on a turn table which is 0.8m above ground plane. 2.Set EUT as normal operation 3.Set SPA Center Frequency = fundamental frequency, RBW, VBW= 10kHz, Span =100kHz. 4.Set SPA Max hold. Mark peak. `

Page 27 of 27 Report No.: S19010703501001 Test Result Power Measured Frequency Temperature Result Part 15.225 Supply Frequency Error (℃) (%) Limit (MHz) (MHz) -20 13.561302 0.001302 0.009602 +/- 0.01% DC 5V 20 13.561301 0.001301 0.009594 +/- 0.01% 50 13.561291 0.001291 0.009521 +/- 0.01% -20 13.561102 0.001102 0.008127 +/- 0.01% DC 4.5V 20 13.561103 0.001103 0.008134 +/- 0.01% 50 13.561101 0.001101 0.008119 +/- 0.01% -20 13.561111 0.001111 0.008193 +/- 0.01% DC 5.5V 20 13.561115 0.001115 0.008223 +/- 0.01% 50 13.561112 0.001112 0.008201 +/- 0.01% END REPORT `


Document Created: 2019-02-14 11:10:12
Document Modified: 2019-02-14 11:10:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC