Test Report

FCC ID: XKB-PP30S

Test Report

Download: PDF
FCCID_1201401

Rapport d’essai / Test report Portée disponible sur Laboratoire JDE : 95767 N° 200909-5715C-R1-E www.cofrac.fr d’essai accrédité N°1-1633 DELIVRE A / ISSUED TO : INGENICO Rue Claude Chappe B.P. 344 07503 GUILHERAND GRANGES Objet / Subject : Essais de compatibilité électromagnétique conformément aux normes : Electromagnetic compatibility tests according to the standards: FCC CFR 47 Part 15, Subpart B. ANSI C63.4 (2003) Matériel testé / Apparatus under test : • Produit / Product : Pavé numérique / Pin pad • Marque / Trade mark : INGENICO • Constructeur / Manufacturer : INGENICO • Type / Model : PP30S-110-01 • N° de série / serial number : 09290PP10000100 • FCC ID : : XKB-PP30S th Date des essais / Test date : Le 28 Octobre 2009 / October 28 , 2009 Lieu d’essai / Test location : BUREAU VERITAS LCIE SUD-EST ZI Centr’Alp – 170 rue de Chatagnon 38430 MOIRANS - France Test réalisé par / Test performed by : Anthony MERLIN document comporte / Composition of document: 17 pages MOIRANS, LE 5 NOVEMBRE 2009 / NOVEMBER 5TH, 2009 Ecrit par / Written by Approuvé par / Approved by, Anthony MERLIN Yannick SAVOIE La reproduction de ce document n'est autorisée que sous sa forme intégrale. Toute reproduction partielle ou toute insertion de résultats dans un texte d'accompagnement en vue de leur diffusion doit recevoir un accord préalable et formel du LCIE. Ce document résulte d’essais effectués sur un spécimen, un échantillon ou une éprouvette. Il ne préjuge pas de la conformité de l’ensemble des produits fabriqués à l’objet essayé. Sauf indication contraire, la décision de conformité prend en compte l’incertitude de mesures. Il ne préjuge en aucun cas d’une décision de certification. Seuls certains essais rapportés dans ce document sont couverts par l’accréditation. Ils sont identifiés par le symbole. This document shall not be reproduced, except in full, without t he written approval of the LCIE. This document contains results related only to the item tested. It does not imply the conformity of the whole production to the item tested .Unless otherwise specified; the decision of conformity takes into account the uncertainty of measures. This document does not anticipate any certification decision. Only certain tests mentioned in this document are covered by the accreditation. They are identified by the symbol.

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 2 / 17 SUMMARY 1. TEST PROGRAM ................................................................................................................................... 3 2. APPARATUS UNDER TEST: CONFIGURATION ................................................................................... 4 3. MEASUREMENT OF CONDUCTED EMISSION (150KHZ-30MHZ) ....................................................... 5 4. MEASUREMENT OF RADIATED EMISSION (30MHZ-1GHZ)................................................................ 7 5. TEST EQUIPMENT LIST ...................................................................................................................... 11 6. UNCERTAINTIES CHART .................................................................................................................... 13 7. ANNEX 1 (GRAPHS) ............................................................................................................................ 14

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 3 / 17 1. TEST PROGRAM Standard: - FCC Part 15, Subpart B (Digital Devices) - ANSI C63.4 (2003) EMISSION TEST LIMITS RESULTS (Comments) Limits for conducted disturbance at mains Quasi-peak Average COMPLY Frequency ports value (dBµV) value (dBµV) 150kHz-30MHz  150-500kHz 66 to 56 56 to 46 0.5-5MHz 56 46 5-30MHz 60 50 Radiated emissions Measure at 3m COMPLY 30MHz-1GHz*  30MHz-88MHz : 40 dBµV/m 88MHz-216MHz : 43.5 dBµV/m 216MHz-960MHz : 46.0 dBµV/m Above 960MHz : 54.0 dBµV/m * Highest internal frequency: 57MHz

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 4 / 17 2. APPARATUS UNDER TEST: CONFIGURATION 2.1. HARDWARE IDENTIFICATION (EUT AND AUXILIARIES): • Equipment under test (EUT): PP30S-110-01 Serial Number: 09290PP10000100 • Inputs/outputs: - USB port • Cables: - USB cable, shielded, length: 1.20m • Auxiliaries equipment used during test: Trade Mark – Model Number FCC ID Description Cable description (Serial number) TOSHIBA SATELITE S1410-704 (PS141E-04YCM-3V) None Laptop Power cable unshielded sn: 13594938G Power supply unit (PA3201U-1ACA SEB100P2-15.0) None Adaptor AC/DC Power cable unshielded 2.2. RUNNING MODE - EUT is powered by USB of laptop - The software wintest v02.00 running - The test sequence is performed in loop, read and verification of data on PP30S memory 2.3. EQUIPMENT MODIFICATIONS None 2.4. SPECIAL ACCESSORIES None

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 5 / 17 3. MEASUREMENT OF CONDUCTED EMISSION (150KHZ-30MHZ) 3.1. TEST CONDITIONS th Date of test : October 28 , 2009 Test performed by : A.MERLIN Humidity : 38% 3.2. SETUP FOR CONDUCTED EMISSIONS MEASUREMENT The product has been tested according to ANSI C63.4-(2003) and FCC Part 15 subpart B. The product has been tested with 110V/60Hz power line voltage on laptop power supply and compared to the FCC Part 15 subpart B §15.107 limits. Measurement bandwidth was 9kHz from 150 kHz to 30 MHz. The EUT with its auxiliaries are set on a non-conducting 80cm above the ground reference plane. The distance between the EUT and the LISN is 80cm. The EUT is 40cm away for the vertical ground plane. The EUT is powered through the laptop that is powered through the LISN (measure). Measurement is made with a Rohde & Schwarz ESU8 receiver in peak mode. This was followed by a Quasi-Peak, i.e. CISPR measurement for any strong signal. If the average limit is met when using a Quasi-Peak detector, the EUT shall be deemed to meet both limits and measurement with the average detector is unnecessary. The LISN (measure and auxiliaries) is 50Ω / 50µH. The Peak data are shown on plots in annex 1. Quasi-Peak and Average measurements are detailed in a table with frequencies and levels measured. Interconnecting cables and equipment's were moved to position that maximized emission. A summary of the worst case emissions found in all test configurations and modes is shown on the following page.

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 6 / 17 3.3. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION None 3.4. MEASUREMENTS RESULTS Mains terminals 110Vac/60Hz: Measurements are performed on the phase (L1) and neutral (N) of the power line of the PC. Measure on L1: graph Emc#1 (see annex 1) Measure on N: graph Emc#2 (see annex 1) RESULT: PASS

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 7 / 17 4. MEASUREMENT OF RADIATED EMISSION (30MHZ-1GHZ) 4.1. TEST CONDITIONS th Date of test : October 28 , 2009 Test performed by : A.MERLIN Humidity : 38% 4.2. SETUP FOR RADIATED EMISSIONS MEASUREMENT The installation of EUT is identical for pre-characterization measures in a 3 meters semi-anechoic chamber and for measures on the 10 meters Open site. The EUT and auxiliaries are set on the non-conducting table of 80 cm height. The EUT is powered by laptop. Pre-characterisation measurement: A pre-scan of all the setup has been performed in a 3 meters semi-anechoic chamber. The distance between EUT and antenna is 3 meters. Test is performed in horizontal (H) and vertical (V) polarization. During the measurement, the EUT is rotated on a 360° range and moved in horizontal and vertical position. Interconnecting cables and equipment's were moved to position that maximized emission. A summary of the worst case emissions found in all test configurations and modes is shown on the following page. The pre-characterization graphs are obtained in PEAK detection. Characterization on 10 meters open site from 30MHz to 1GHz: The product has been tested according to ANSI C63.4 (2003), FCC part 15 subpart B. Radiated Emissions were measured on an open area test site. A description of the facility is on file with the FCC. The product has been tested at a distance of 10 meters (30MHz to 1GHz) from the antenna and corrected according to requirements of 15.109.e). Results are compared to the FCC part 15 subpart B §15.109 limits. Measurement bandwidth was 120kHz from 30 MHz to 1GHz. Antenna height search was performed from 1m to 4m for both horizontal and vertical polarization. Continuous linear turntable azimuth search was performed with 360 degrees range.

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 8 / 17 Radiated emission test setup 4.3. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION None

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 9 / 17 4.4. MEASUREMENTS RESULTS Pre-characterisation measurement: pre-scan measurement at 3m (PEAK detection, graph examples) Polarisation H: graph Emr#1 (see annex 1) Polarisation V: graph Emr#2 (see annex 1) QUALIFICATION: 10 / 3 meters measurement on the Open Area Test Site. Frequency list has been created with semi-anechoic chamber pre-scan results. Measurements are performed using a QUASI-PEAK detection. Frequency range 30MHz to 1GHz: Measurements are performed using a QUASI-PEAK detection (RBW=120kHz) No Frequency Limit Measure Margin Angle Pol Ht Correc. Comments (MHz) Quasi-Peak Quasi-Peak (Meas-Lim) Table Ant. Ant. factor (dBµV/m) (dBµV/m) (dB) (deg) (cm) (dB) 1 33.960 40.0 35.9 -4.1 160 V 100 12.6 2 35.747 40.0 31.6 -8.4 150 V 100 12.1 3 47.886 40.0 34.1 -5.9 0 V 100 12.5 4 56.681 40.0 31.6 -8.4 30 V 150 12.1 5 117.815 43.5 32.6 -10.9 40 V 140 16.3 6 125.752 43.5 32.8 -10.7 350 V 100 15.3 7 298.144 46.0 34.9 -11.1 65 V 100 17.4 8 994.275 54.0 37.2 -16.8 70 V 250 29.7 Note: Measures have been done at 10m distance and corrected according to requirements of 15.109.e) (M@3m = M@10m+10.5dB) RESULT: PASS

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 10 / 17 4.5. Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any) from the measured reading. The basic equation with a sample calculation is as follow: FS = RA + AF + CF – AG Where FS = Field Strength RA = Receiver Amplitude AF = Antenna Factor CF = Cable Factor AG = Amplifier Gain Assume a receiver reading of 52.5dBµV is obtained. The antenna factor of 7.4 and a cable factor of 1.1 is added. The amplifier gain of 29dB is subtracted, giving field strength of 32 dBµV/m. FS = 52.5 + 7.4 + 1.1 – 29 = 32 dBµV/m The 32 dBµV/m value can be mathematically converted to its corresponding level in µV/m. Level in µV/m = Common Antilogarithm [(32dBµV/m)/20] = 39.8 µV/m.

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 11 / 17 5. TEST EQUIPMENT LIST N° LCIE TYPE COMPANY REF SN RADIATED EMISSION MEASUREMENT (PRE-SCAN SEMI-ANECHOIC CHAMBER #2) A5329032VO Absorption clamp LUTHI MDS21 2826 A5329044VO Absorption clamp RHODE ET SCHWARZ 85024A 194.0100.50 X A4049060VO Adapter quasi-peak HEWLETT PACKARD HP85650A A7102024VO Amplifier 8 GHz HEROTEK A1080304A 222033 X A7486006VO Amplifier 0.1MHz – 1300 MHz HEWLETT PACKARD 8447F 3113A07116 A7085008VO Amplifier 0.1MHz – 1300 MHz HEWLETT PACKARD 8447D 2944A06838 A7085009VO Amplifier 0.1MHz – 1300 MHz HEWLETT PACKARD 8447D 2944A08871 A7085010VO Amplifier 10MHz – 1300 MHz A-INFO INC JXWBLA-T X C2040146VO Antenna Bi-Log XWing TESEQ CBL6144 25904 C2042027VO Antenna horn EMCO 3115 6382 C2042028VO Antenna horn 26GHz SCHWARZBECK BBHA 9170 BBHA9170232 C2040052VO Antenna Loop ELECTRO-METRICS EM-6879 690234 X A5329045VO Cable EMR (s-Anechoic chamber) X A5329056VO Cable Radiat EMI (Pre-amp/Analyzer) X A5329057VO Cable Radiat. EMI (Pre-amp/cage) A2642019 Measurement Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 100131 X A4060030VO Pre-selector RF HEWLETT PACKARD HP85685A X A3169050VO Radiated emission comb generator BARDET PR17B X D3044015VO Semi-Anechoic chamber #2 SIEPEL X A4060029VO Spectrum analyzer HEWLETT PACKARD HP8568B X A4060028VO Spectrum analyzer display HEWLETT PACKARD HP85662A X F2000404VO Turntable chamber ETS Lingren Model 2165 00085780 X F2000393VO Turntable controller chamber ETS Lingren Model 2066 RADIATED EMISSION MEASUREMENT (OPEN AREA TEST SITE) A5329032VO Absorption clamp LUTHI MDS21 2826 A5329044VO Absorption clamp RHODE ET SCHWARZ 85024A 194.0100.50 X A4049059VO Adapter quasi-peak HEWLETT PACKARD HP85650A 2811A01134 A7102024VO Amplifier 8 GHz HEROTEK A1080304A 222033 A7102026VO Amplifier 8-26GHz ALDETEC ALS01452 1 A7085008VO Amplifier 0.1MHz – 1300 MHz HEWLETT PACKARD 8447D 2944A06838 A7085009VO Amplifier 0.1MHz – 1300 MHz HEWLETT PACKARD 8447D 2944A08871 A7085010VO Amplifier 10MHz – 1300 MHz A-INFO INC JXWBLA-T X C2040050VO Antenna biconic EMCO 3104C 9401-4636 C2040051VO Antenna Bi-log CHASE CBL6111A 1628 C2042027VO Antenna horn EMCO 3115 6382 C2042028VO Antenna horn 26GHz SCHWARZBECK BBHA 9170 BBHA9170232 X C2040056VO Antenna log-periodic EMCO 3146 2178 C2040052VO Antenna Loop ELECTRO-METRICS EM-6879 690234 X F2000288VO Antenna mast EMCO 1050 X A5329048VO Cable EMR OATS SUCOFLEX 106G 553 X A5329199VO Cable OATS (Mast at 10m) UTIFLEX X A5329188VO Cable OATS (Mast at 10m) UTIFLEX A5329076VO Cable OATS (Mast at 3m) UTIFLEX A5329196VO Cable OATS (Turntable) UTIFLEX A5329187VO Cable OATS (Turntable) UTIFLEX A2640011VO Measurement receiver 9kHz–30MHz ROHDE ET SCHWARZ ESH3 972079/117 A2642019 Measurement Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 100131 X A4060027VO Pre-selector RF HEWLETT PACKARD HP85685A 2837A00784 X A3169050VO Radiated emission comb generator BARDET PR17B X A4060017VO Spectrum analyzer HEWLETT PACKARD HP8568B 2732A04155 A4060018VO Spectrum Analyzer 9KHz – 26.5GHz HEWLETT PACKARD 8593E 3409u00537 A4060016VO Spectrum analyzer 9kHz –1.8GHz HEWLETT PACKARD 8591E 3536A00384 X A4060019VO Spectrum analyzer display HEWLETT PACKARD HP85662A 2816A16603 X F2000403VO Turntable ETS LINDGREN Model 2187 X F2000286VO Turntable / Antenna mast controller ETS LINDGREN Model 2066 CONDUCTED MEASUREMENT EMISSION X A5329054VO Cable Conduct. EMI x A5329060VO Cable Conduct. EMI A5329189VO Shielded cable UTIFLEX A5329076VO Shielded cable UTIFLEX

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 12 / 17 N° LCIE TYPE COMPANY REF SN A5329206VO Shielded cable UTIFLEX A5329207VO Shielded cable UTIFLEX A5329060VO Shielded cable UTIFLEX A5329071VO Shielded cable UTIFLEX X A3169049VO Conducted emission comb generator BARDET CGPR12 A4040015 Clickmeter SCHAFFNER DIA1512D 22338 A5329037VO Current injection probe SCHAFFNER CIP8213 52 A1290017VO Current probe SCHAFFNER CSP9160 1097 A5329036VO Direct Injection Module 100+50 Ohms LCIE MID01-100 ohms A7156004VO Direct Injection Module 100+50 Ohms LUTHI CR100A 221 A5329042VO Ferrite Tube LUTHI FTC 101 4485 A1092042VO Ferrite Tube LUTHI FTC101 4763 C2320059VO LISN EMCO 3810/2SH 9511/1182 C2320068VO LISN EMCO 3825/2 9309/2122 C2320061VO LISN TELEMETER ELECTRONIC NNB-2/16Z 98010 X C2320062VO LISN tri-phase ESH2-Z5 RHODE ET SCHWARZ 33852.19.53 841223/008 C2320063VO LISN tri-phase ESH2-Z5 RHODE ET SCHWARZ 33852.19.53 841223/007 C2320123VO LISN RHODE ET SCHWARZ ENV216 100037 A2640011VO Measurement receiver 9kHz–30MHz ROHDE ET SCHWARZ ESH3 972079/117 X A2642019VO Measurement Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 100131 C2320067VO ISN 2 x 2 wires RHODE ET SCHWARZ ENY22 836727/015 C2320066VO ISN 4 wires RHODE ET SCHWARZ ENY41 838119/023 C2320124VO ISN 4 wires TESEQ T400A 24873 D3044016VO Semi-Anechoic chamber #1 SIEPEL D3044017VO Semi-Anechoic chamber #3 SIEPEL D3044015VO Semi-Anechoic chamber #2 SIEPEL X D3044010VO Faraday Cage RAY PROOF 4854 X A4049061VO Transient limiter HEWLETT PACKARD 11947A 3107A01596 A4089117VO Voltage probe LCIE MISCALLENOUS (CONTROL EQUIPMENT) A6440068VO Data Logger AGILENT 34970A US37043935 A2120003VO Programable PSU, HAR/FLK HEWLETT PACKARD 6842A 3531A00109 A6440068VO Data Logger Board AGILENT 34901A MY41037442 D1022117VO Climatic chamber BIA CLIMATIC CL 6-25 200 105 6 A7043037VO Power supply DC 30V 10A ELC AL924 95/00600 A1240170VO Multimeter Fluke 87 75250745 A1240171VO Multimeter FLUKE 189 89770115 A4024018VO Oscilloscope 500 MHz Hewlett Packard 54542C US36040602 A4024019VO Oscilloscope Hewlett Packard 54720A 7426600 X B4204052VO Thermo-hygrometer HUGER A7043036VO Power supply DC 300W / 150V-6A SODILEC 7SDLIN/GB AUTO 300 493711 A4083040VO Oscilloscope 100 MHz 500Ms/s Tektronix TDS30-25 H712103

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 13 / 17 6. UNCERTAINTIES CHART Incertitude élargie Incertitude limite laboratoire / du CISPR / CISPR Type de mesure / Kind of measurement Wide uncertainty uncertainty limit ± laboratory y (k=2) ± x Mesure des perturbations conduites en tension sur le réseau d’énergie (triphasé) 3.6 dB 3.6 dB Measurement of conducted disturbances in voltage on the power port (three phases) Mesure des perturbations conduites en tension sur le réseau d’énergie (monophasé) 3.57 dB 3.6 dB Measurement of conducted disturbances in voltage on the power port (single line) Mesure des perturbations conduites en tension sur le réseau de télécommunication A l’étude / 3.28 dB Measurement of conducted disturbances in voltage on the telecommunication port. Under consid. Mesure des perturbations discontinues conduites en tension 3.47 dB 3.6 dB Measurement of discontinuous conducted disturbances in voltage Mesure des perturbations conduites en courant A l’étude / 2.90 dB Measurement of conducted disturbances in current Under consid. Mesure du champ électrique rayonné sur le site en espace libre de Voiron 5.07 dB 5.2 dB Measurement of radiated electric field on the Voiron open area test site Mesure du champ électrique rayonné IN SITU de 30 à 1000 MHz A l’étude / 5.2 dB IN SITU measurement of radiated electric field from 30 to 1000MHz Under consideration Mesure de la puissance perturbatrice / Measurement of disturbance power 3.37 dB 4.5 dB Mesure des harmoniques de courant / Measurement of current harmonics 11.11% / Mesure du flicker / Flicker measurement 9.26% / Les valeurs d’incertitudes calculées du laboratoire étant inférieures aux valeurs d’incertitudes limites établies par le CISPR, la conformité de l’échantillon est établie directement par les niveaux limites applicables. / The uncertainty values calculated by the laboratory are lower than limit uncertainty values defined by the CISPR. The conformity of the sample is directly established by the applicable limits values.

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 14 / 17 7. ANNEX 1 (GRAPHS) CONDUCTED EMISSIONS Test configuration: Graph name: Emc#1 Voltage / Frequency 110VAC/60Hz Line/Port Phase L1 Peak Measure QPeak Limit RBW / VBW : 9kHz / 30kHz Average Measure Average Limit 100 dBµV 0 150kHz 30MHz Fréquence Sous-bande 1 Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) 0.166 31.20 55.16 -23.96 39.72 65.16 -25.44 0.502 30.51 46 -15.49 38.95 56 -17.05

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 15 / 17 CONDUCTED EMISSIONS Test configuration: Graph name: Emc#2 Voltage / Frequency 110VAC/60Hz Line/Port Neutral N Peak Measure QPeak Limit RBW / VBW : 9kHz / 30kHz Average Measure Average Limit 100 dBµV 0 150kHz 30MHz Fréquence Sous-bande 1 Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) 0.166 37.03 55.16 -18.13 45.39 65.16 -19.77 0.502 29.62 46 -16.38 38.78 56 -17.22

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 16 / 17 RADIATED EMISSION Test configuration: Graph name: Emr#1 Antenna position: Horizontal Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 36.84 25.45 81.8 23.94 108.12 25.06 119.84 25.95 168 26.58 179.92 27.67 298.64 27.95 500.92 30.71

RAPPORT D'ESSAI / TEST REPORT N° 200909-5715C-R1-E Page : 17 / 17 RADIATED EMISSION Test configuration: Graph name: Emr#2 Antenna position: Vertical Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 34 37.66 35.76 36.23 47.92 29.94 56.72 31.06 117.76 29.28 125.6 28.94 298.2 34.1 498.28 30.12 695.92 32.27 994.28 40.27


Document Created: 2009-11-10 17:57:13
Document Modified: 2009-11-10 17:57:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC