Test report DFS

FCC ID: XKB-L5KCLWBTV3

Test Report

Download: PDF
FCCID_4399162

TEST REPORT Test report no.: 1-8662/19-02-12 D-PL-12076-01-03 BNetzA-CAB-02/21-102 Testing laboratory Applicant CTC advanced GmbH Ingenico Group Untertuerkheimer Strasse 6 – 10 9 Avenue de la Gare Rovaltain 66117 Saarbruecken / Germany 26958 Valence Cedex 9 / FRANCE Phone: + 49 681 5 98 - 0 Phone: -/- Fax: + 49 681 5 98 - 9075 Contact: Nicolas Jacquemont Internet: http://www.ctcadvanced.com e-mail: nicolas.jacquemont@ingenico.com e-mail: mail@ctcadvanced.com Phone: +33475842123 Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) Manufacturer The accreditation is valid for the scope of testing Ingenico Group procedures as stated in the accreditation certificate with 9 Avenue de la Gare Rovaltain the registration number: D-PL-12076-01-03 26958 Valence Cedex 9 / FRANCE Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence - Exempt Local Area Network (LE-LAN) Devices For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Android Point of sales Terminal Model name: Lane/5000 CL/Eth/WiFi/BTv3 FCC ID: 2586D-L5KCLWBTV3 IC: XKB-L5KCLWBTV3 UNII bands: Frequency: 5150 MHz to 5250 MHz; 5250 MHz to 5350 MHz; 5470 MHz to 5725 MHz; 5725 MHz to 5850 MHz Technology tested: WLAN (DFS only) Antenna: Integrated PCB antenna Power supply: 115 V AC & 5 V DC by mains adapter Temperature range: 0°C to +45°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: cn=Mihail Dorongovskij, o=CTC advanced Digital unterschrieben von David Lang GmbH, ou=DOR-281116, DN: cn=David Lang, o=CTC advanced GmbH, email=Mihail.Dorongovskij@ctcadvanced.co ou=LNG-161129, email=david.lang@ctcadvanced.com, m, c=DE c=DE 2019.08.07 08:18:32 +02'00' Datum: 2019.08.07 09:29:06 +02'00' Mihail Dorongovskij David Lang Lab Manager Lab Manager Radio Communications & EMC Radio Communications & EMC

Test report no.: 1-8662/19-02-12 1 Table of contents 1 Table of contents ............................................................................................................................................2 2 General information .......................................................................................................................................3 2.1 Notes and disclaimer.........................................................................................................................3 2.2 Application details .............................................................................................................................3 2.3 Test laboratories sub-contracted .....................................................................................................3 3 Test standard/s and references ....................................................................................................................4 4 Test environment............................................................................................................................................5 5 Test item ..........................................................................................................................................................5 5.1 General description ...........................................................................................................................5 5.2 Additional information ......................................................................................................................5 6 Measurement uncertainty ..............................................................................................................................6 7 Summary of measurement results ...............................................................................................................6 8 Additional comments .....................................................................................................................................7 9 RF measurements ..........................................................................................................................................8 9.1 Description of test setup...................................................................................................................8 9.1.1 Conducted measurements...................................................................................................................8 9.2 Parameters of DFS test signals ......................................................................................................10 9.2.1 DFS Detection Thresholds for Master Devices as well as Client Devices With Radar Detection .....10 9.2.2 DFS Response Requirement Values .................................................................................................10 9.2.3 Radar Test Waveforms ......................................................................................................................11 9.3 Test preparation ...............................................................................................................................14 9.3.1 Channel loading .................................................................................................................................14 9.3.2 Radar burst timing signal ...................................................................................................................15 9.4 Test results (prior to use of a channel) .........................................................................................16 9.5 Test results (during normal operation) .........................................................................................16 9.5.1 Channel move time / channel closing transmission time ...................................................................16 9.5.2 Non-Occupancy Period......................................................................................................................18 10 Observations ............................................................................................................................................19 Annex A Glossary............................................................................................................................................19 Annex B Document history ............................................................................................................................20 Annex C Accreditation Certificate – D-PL-12076-01-04 ...............................................................................20 Annex D Accreditation Certificate – D-PL-12076-01-05 ...............................................................................21 © CTC advanced GmbH Page 2 of 21

Test report no.: 1-8662/19-02-12 2 General information 2.1 Notes and disclaimer The test results of this test report relate exclusively to the test item specified in this test report. CTC advanced GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CTC advanced GmbH. The testing service provided by CTC advanced GmbH has been rendered under the current "General Terms and Conditions for CTC advanced GmbH". CTC advanced GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the CTC advanced GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Under no circumstances does the CTC advanced GmbH test report include or imply any product or service warranties from CTC advanced GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by CTC advanced GmbH. All rights and remedies regarding vendor’s products and services for which CTC advanced GmbH has prepared this test report shall be provided by the party offering such products or services and not by CTC advanced GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. 2.2 Application details Date of receipt of order: 2017-11-13 Date of receipt of test item: 2018-01-22 Start of test: 2018-02-01 End of test: 2018-02-01 Person(s) present during the test: -/- 2.3 Test laboratories sub-contracted None © CTC advanced GmbH Page 3 of 21

Test report no.: 1-8662/19-02-12 3 Test standard/s and references Test standard Date Description 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 2 February Digital Transmission Systems (DTSs), Frequency Hopping 2017 Systems (FHSs) and Licence - Exempt Local Area Network (LE- LAN) Devices Spectrum Management and Telecommunications Radio Standards RSS - Gen Issue 5 April 2018 Specification - General Requirements for Compliance of Radio Apparatus Guidance Version Description Guidelines for Compliance Testing of Unlicensed National UNII: KDB 789033 D02 v02r01 Information Infrastructure (U-NII) Devices - Part 15, Subpart E American national standard of procedures for compliance testing ANSI C63.10-2013 -/- of unlicensed wireless devices Compliance measurement procedures for unlicensed - national information infrastructure devices operating in the 5250 - 5350 UNII: KDB 905462 D02 v02 MHz and 5470 - 5725 MHz bands incorporating dynamic frequency selection UNII: KDB 905462 D03 v01r02 Client Without DFS New Rules UNII: KDB 905462 D04 v01 Operational Modes for DFS Testing New Rules © CTC advanced GmbH Page 4 of 21

Test report no.: 1-8662/19-02-12 4 Test environment Tnom +22 °C during room temperature tests Temperature : Tmax No tests under extreme temperature conditions required. Tmin No tests under extreme temperature conditions required. Relative humidity content : 55 % Barometric pressure : 1021 hpa Vnom 115 V AC & 5 V DC by mains adapter Power supply : Vmax No tests under extreme voltage conditions required. Vmin No tests under extreme voltage conditions required. 5 Test item 5.1 General description Kind of test item : Android Point of sales Terminal Type identification : Lane/5000 CL/Eth/WiFi/BTv3 HMN : -/- PMN : Lane/5000 HVIN : Lane/5000 CL/Eth/WiFi/BTv3 FVIN : -/- S/N serial number : Conducted unit: 170899913261044599999921 HW hardware status : 01 SW software status : OS_038105_HTB_0086; RF test mode UNII bands: Frequency band : 5150 MHz to 5250 MHz; 5250 MHz to 5350 MHz; 5470 MHz to 5725 MHz; 5725 MHz to 5850 MHz Type of radio transmission : OFDM Use of frequency spectrum : Type of modulation : (D)BPSK, (D)QPSK, 16 – QAM, 64 – QAM 20 MHz: 24 Number of channels : 40 MHz: 11 Antenna : Integrated PCB antenna Power supply : 115 V AC & 5 V DC by mains adapter Temperature range : 0°C to +45°C 5.2 Additional information The content of the following annexes is defined in the QA. It may be that not all of the listed annexes are necessary for this report, thus some values in between may be missing. Test setup and EUT photos are included in test report: 1-8662/19-02-01_AnnexA © CTC advanced GmbH Page 5 of 21

Test report no.: 1-8662/19-02-12 6 Measurement uncertainty Measurement uncertainty Test case Uncertainty Frequency accuracy (radar burst) 0.1 Hz Level accuracy (radar burst) ± 0.8 dB 7 Summary of measurement results ☒ No deviations from the technical specifications were ascertained ☐ There were deviations from the technical specifications ascertained This test report is only a partial test report. ☒ The content and verdict of the performed test cases are listed below. TC Identifier Description Verdict Date Remark DFS-Testing CFR Part 15, FCC 06-96 Pass 2019-08-07 DFS only Test Standard Test Case Bandwidth C NC NA NP Remark Clause 7.8.1*3 U-NII Detection Bandwidth -/- ☐ ☐ ☒ ☐ *1*2*3 §15.407 (h)(2) DFS Detection Threshold -/- ☐ ☐ ☒ ☐ *1*2*3 §15.407 (h)(2) (ii) & Channel Availability Check Time -/- ☐ ☐ ☒ ☐ *1*3 7.8.2*3 §15.407 (h)(2) (iv) & Non-Occupancy Period 40 MHz ☒ ☐ ☐ ☐ *2 7.8.3*3 §15.407 (h)(2) (iii) Channel Move Time / Channel Closing & Transmission Time 40 MHz ☒ ☐ ☐ ☐ *2 7.8.2*3 In-Service Monitoring / 7.8.3 & 7.8.4*3 Statistical Performance Check -/- ☐ ☐ ☒ ☐ *2*3 Abbreviations/References: C Compliant NC Not compliant NA Not applicable NP Not performed *1 Prior to use of a channel *2 During normal operation *3 Not applicable for Client Devices without radar detection. © CTC advanced GmbH Page 6 of 21

Test report no.: 1-8662/19-02-12 8 Additional comments Reference documents: None Special test descriptions: All tests except the In-Service Monitoring are conducted with Pulse Type 0. A sample with temporary antenna connector was provided to perform the measurements in a conducted way. Configuration descriptions: Iperf was used to generate the required channel load (duty cycle greater 17 percent). DFS functionality: ☐ Master device ☐ Client with radar detection ☒ Client without radar detection © CTC advanced GmbH Page 7 of 21

Test report no.: 1-8662/19-02-12 9 RF measurements 9.1 Description of test setup 9.1.1 Conducted measurements Setup Figure 1 shows a setup whereby the UUT is a RLAN device operating in slave mode, without Radar Interference Detection function. This setup also contains a RLAN device operating in master mode. The radar test signals are injected into the master device. The UUT (slave device) is associated with the master device. Figure 1 shows an example Figure 1: Setup RPP = SG - CA (RPP-radar pulse power; SG-signal generator power; CA-loss signal path) Example calculation: RPP [dBm] = -30.0 [dBm] – 33.0 [dB] = -63.0 [dBm] © CTC advanced GmbH Page 8 of 21

Test report no.: 1-8662/19-02-12 Typically, the calibrations of the test apparatus are commissioned to and performed by an accredited calibration laboratory. The calibration intervals are determined in accordance with the DIN EN ISO/IEC 17025. In addition to the external calibrations, the laboratory executes comparison measurements with other calibrated test systems or effective verifications. Weekly chamber inspections and range calibrations are performed. Where possible, rf- generating and signalling equipment as well as measuring receivers and analyzers are connected to an external high-precision 10 MHz reference (GPS-based or rubidium frequency standard). In order to simplify the identification of the equipment used at some special tests, some items of test equipment and ancillaries can be provided with an identifier or number in the equipment list below (Lab/Item). Equipment table: Lab / Kind of Last Next No. Equipment Type Manufacturer Serial No. INV. No. Item Calibration Calibration Calibration Vector Signal 1 A SMU200A R&S 101633 300003496 k 24.01.2017 23.01.2020 Generator Spectrum Analyzer 2 A 9kHz to 30GHz - FSP30 R&S 100886 300003575 k 24.01.2017 23.01.2019 140..+30dBm div. Splitter, Cables, 3 A DFS-test site Mini-Circuits na 300004557 ev -/- -/- Attenuators Latitude 15 6000 4 A Notebook Dell 300004737 ne -/- -/- Series Dual Band Gigabit 5 A* RT-AC68U Asus F1IMOH056666 400001244 ne -/- -/- Router RF-Cable DFS- ST18/SMAm/SMAm/ Batch no. 6 A Huber & Suhner 400001252 ev -/- -/- Tester Receiver 24 1308650 RF-Cable DFS- Batch no. 7 A Enviroflex 316 D Huber & Suhner 400001257 ev -/- -/- Tester No. 1 1560522 RF-Cable DFS- Batch no. 8 A Enviroflex 316 D Huber & Suhner 400001262 ev -/- -/- Tester No. 6 1560522 9 A Shielding Box JRE2218 JRE Test LLC 0001110 400001265 ne -/- -/- * FCC ID: MSQ-RTAC68U Agenda: Kind of Calibration k calibration / calibrated EK limited calibration ne not required (k, ev, izw, zw not required) zw cyclical maintenance (external cyclical maintenance) ev periodic self verification izw internal cyclical maintenance Ve long-term stability recognized g blocked for accredited testing vlkI! Attention: extended calibration interval NK! Attention: not calibrated *) next calibration ordered / currently in progress © CTC advanced GmbH Page 9 of 21

Test report no.: 1-8662/19-02-12 9.2 Parameters of DFS test signals 9.2.1 DFS Detection Thresholds for Master Devices as well as Client Devices With Radar Detection Value Maximum Transmit Power EIRP (see note) ≥ 200 mW -64 dBm < 200 mW and -62 dBm power spectral density < 10 dBm/MHz < 200 mW and -64 dBm That do not meet the power spectral density < 10 dBm/MHz Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 D01. 9.2.2 DFS Response Requirement Values Parameter Value Non-occupancy period minimum 30 minutes Channel Availability Check Time 60 seconds 10 seconds Channel Move Time See Note 1. 200 milliseconds + an aggregate of 60 milliseconds Channel Closing Transmission Time over remaining 10 second period. See Notes 1 and 2. Minimum 100% of the U-NII 99% transmission U-NII Detection Bandwidth power bandwidth. See Note 3. Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 should be used. For each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. © CTC advanced GmbH Page 10 of 21

Test report no.: 1-8662/19-02-12 9.2.3 Radar Test Waveforms This section provides the parameters for required test waveforms, minimum percentage of successful detections, and the minimum number of trials that must be used for determining DFS conformance. Short Pulse Radar Test Waveforms Radar Type Pulse Width PRI (µsec) Number of Minimum Minimum (µsec) Pulses Percentage of Number of Successful Trials Detection 0 1 1428 18 See Note 1 See Note 1 1 1 Test A: 15 unique Roundup 60% 30 PRI values randomly selected from the list of 23 PRI values in Table 5a Test B: 15 unique PRI values randomly selected within the range of 518- 3066 μsec, with a minimum increment of 1 μsec, excluding PRI values selected in Test A 2 1-5 150-230 23-29 60% 30 3 6-10 200-500 16-18 60% 30 4 11-20 200-500 12-16 60% 30 Aggregate (Radar Types 1-4) 80% 120 Note 1: Short Pulse Radar Type 0 should be used for the detection bandwidth test, channel move time, and channel closing time tests. A minimum of 30 unique waveforms are required for each of the Short Pulse Radar Types 2 through 4. © CTC advanced GmbH Page 11 of 21

Test report no.: 1-8662/19-02-12 Pulse Repetition Intervals Values for Test A Pulse Repetition Frequency Pulse Repetition Frequency Pulse Repetition Interval Number (Pulses Per Second) (Microseconds) 1 1930.5 518 2 1858.7 538 3 1792.1 558 4 1730.1 578 5 1672.2 598 6 1618.1 618 7 1567.4 638 8 1519.8 658 9 1474.9 678 10 1432.7 698 11 1392.8 718 12 1355 738 13 1319.3 758 14 1285.3 778 15 1253.1 798 16 1222.5 818 17 1193.3 838 18 1165.6 858 19 1139 878 20 1113.6 898 21 1089.3 918 22 1066.1 938 23 326.2 3066 Long Pulse Radar Test Waveform Radar Pulse Chirp Width PRI Number of Number Minimum Minimum Type Width (MHz) (µsec) Pulses per of Percentage of Number (µsec) Burst Bursts Successful of Trails Detection 5 50-100 5-20 1000- 1-3 8-20 80% 30 2000 The parameters for this waveform are randomly chosen. Thirty unique waveforms are required for the Long Pulse Radar Type waveforms. © CTC advanced GmbH Page 12 of 21

Test report no.: 1-8662/19-02-12 Frequency Hopping Radar Test Waveform Radar Pulse Chirp Pulses Hopping Hopping Minimum Minimum Type Width Width per Hop Rate (kHz) Sequence Percentage of Number (µsec) (MHz) Length Successful of Trails (msec) Detection 6 1 333 9 0.333 300 70% 30 For the Frequency Hopping Radar Type, the same Burst parameters are used for each waveform. The hopping sequence is different for each waveform and a 100-length segment is selected from the hopping sequence defined. The first frequency in a hopping sequence is selected randomly from the group of 475 integer frequencies from 5250 – 5724 MHz. Next, the frequency that was just chosen is removed from the group and a frequency is randomly selected from the remaining 474 frequencies in the group. This process continues until all 475 frequencies are chosen for the set. © CTC advanced GmbH Page 13 of 21

Test report no.: 1-8662/19-02-12 9.3 Test preparation 9.3.1 Channel loading Timing plots are required with calculations demonstrating a minimum channel loading of approximately 17% or greater. For example, channel loading can be estimated by setting the spectrum analyzer for zero span and approximate the Time On/ (Time On + Off Time). This can be done with any appropriate channel BW and modulation type. HT40-Mode: Duty Cycle nHT40-mode: 19% RBW 10 MHz * VBW 10 MHz Ref -8 dBm * Att 20 dB SWT 100 ms -10 A SGL -15 1 PK MAXH -20 -25 -30 TH -31.2 dBm -35 3DB -40 -45 -50 -55 -60 Center 5.51 GHz 10 ms/ Date: 1.FEB.2018 19:34:05 Plot 1 © CTC advanced GmbH Page 14 of 21

Test report no.: 1-8662/19-02-12 9.3.2 Radar burst timing signal To accurately determine the channel closing time and channel closing transmission time the spectrum analyser is triggered at the end of the radar burst (see marker at t = 0ms). Example plot Plot 2 © CTC advanced GmbH Page 15 of 21

Test report no.: 1-8662/19-02-12 9.4 Test results (prior to use of a channel) Not applicable. 9.5 Test results (during normal operation) 9.5.1 Channel move time / channel closing transmission time After a radar’s presence is detected, all transmissions shall cease on the operating channel within 10 seconds. Transmissions during this period shall consist of normal traffic for a maximum of 200 ms after detection of the radar signal. In addition, intermittent management and control signals can be sent during the remaining time to facilitate vacating the operating channel not exceeding 60ms. The test is performed during normal operation with the highest bandwidth supported by the DUT. Channel Closing Time RBW 3 MHz Marker 2 [T1 ] * VBW 3 MHz -32.07 dBm Ref 0 dBm * Att 10 dB SWT 15 s 114.375000 ms 0 Marker 1 [T1 ] -60.10 dBm 0.000000 s A -10 1 PK * CLRWR TRG -20 -30 2 -40 3DB -50 1 -60 -70 Center 5.51 GHz 1.5 s/ Date: 1.FEB.2018 19:36:18 Plot 3 Note: With Marker 1 at the end of the radar pulse (t = 0ms) the Channel Closing Time is determined by setting a Delta-Marker to the point where the last transmission occurred. The Channel Closing Time is 114ms © CTC advanced GmbH Page 16 of 21

Test report no.: 1-8662/19-02-12 Channel Closing Transmission Time RBW 3 MHz Marker 1 [T1 ] * VBW 3 MHz -61.83 dBm Ref 0 dBm * Att 10 dB SWT 1.2 s 0.000000 s 0 Marker 2 [T1 ] -34.45 dBm 156.750000 ms A -10 1 PK * CLRWR TRG -20 -30 2 -40 3DB -50 -60 1 -70 Center 5.51 GHz 120 ms/ Date: 1.FEB.2018 19:43:13 Plot 4 Note: The accumulated transmission time is calculated by the number of bins occurring after t = 0ms multiplied with the Time-per-sweep point-factor resulting from the Sweep Time and number of Sweep Points of the Spectrum Analyser. The total Channel Closing Transmission Time is 37.2ms. © CTC advanced GmbH Page 17 of 21

Test report no.: 1-8662/19-02-12 9.5.2 Non-Occupancy Period A channel that has been flagged as containing a radar system, either by a channel availability check or in- service monitoring, is subject to a non-occupancy period of at least 30 minutes. The non occupancy period starts at the time when the radar system is detected. RBW 3 MHz Marker 1 [T1 ] * VBW 3 MHz -58.38 dBm Ref 0 dBm * Att 10 dB SWT 1820 s 0.000000 s 0 A -10 1 PK * CLRWR TRG -20 -30 -40 3DB -50 1 -60 -70 Center 5.51 GHz 182 s/ Date: 1.FEB.2018 20:22:04 Plot 5 © CTC advanced GmbH Page 18 of 21

Test report no.: 1-8662/19-02-12 10 Observations No observations except those reported with the single test cases have been made. Annex A Glossary EUT Equipment under test DUT Device under test UUT Unit under test GUE GNSS User Equipment FCC Federal Communications Commission FCC ID Company Identifier at FCC IC Industry Canada PMN Product marketing name HMN Host marketing name HVIN Hardware version identification number FVIN Firmware version identification number EMC Electromagnetic Compatibility HW Hardware SW Software Inv. No. Inventory number S/N or SN Serial number C Compliant NC Not compliant NA Not applicable NP Not performed PP Positive peak QP Quasi peak AVG Average OC Operating channel OCW Operating channel bandwidth OBW Occupied bandwidth OOB Out of band DFS Dynamic frequency selection CAC Channel availability check OP Occupancy period NOP Non occupancy period DC Duty cycle PER Packet error rate CW Clean wave MC Modulated carrier WLAN Wireless local area network RLAN Radio local area network DSSS Dynamic sequence spread spectrum OFDM Orthogonal frequency division multiplexing © CTC advanced GmbH Page 19 of 21

Test report no.: 1-8662/19-02-12 Annex B Document history Version Applied changes Date of release -/- Initial release 2019-08-07 Annex C Accreditation Certificate – D-PL-12076-01-04 first page last page Note: The current certificate annex is published on the website (link see below) of the Accreditation Body DAkkS or may be received by CTC advanced GmbH on request https://www.dakks.de/as/ast/d/D-PL-12076-01-04.pdf © CTC advanced GmbH Page 20 of 21

Test report no.: 1-8662/19-02-12 Annex D Accreditation Certificate – D-PL-12076-01-05 first page last page Note: The current certificate annex is published on the website (link see below) of the Accreditation Body DAkkS or may be received by CTC advanced GmbH on request https://www.dakks.de/as/ast/d/D-PL-12076-01-05.pdf ################################## END OF TEST REPORT ################################## © CTC advanced GmbH Page 21 of 21


Document Created: 2019-08-07 09:29:06
Document Modified: 2019-08-07 09:29:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC