Test Report

FCC ID: XKB-L2500CLWIBT

Test Report

Download: PDF
FCCID_3441735

                                         FCC PART 15C

                                          TEST REPORT
                                                          For


                                               INGENICO
          9 Avenue de la Gare-Rolvatain TGV, BP 25156, Valence Cedex 9, France


                                 FCC ID: XKB-L2500CLWIBT



           Repo rt Typ e:                            Product Name:
           Ori ginal Report                          Link/2500




                 Test Engineer:         Kevin Hu


               Report Number:           RXM170217051A


                   Report Date:         2017-03-10
                                        Henry Ding
                                        EMC Leader
                  Reviewed By:

                                        Bay Area Compliance Laboratories Corp. (Chengdu)
              Test Laboratory:          No.5040, Huilongwan Plaza, No.1, Shawan Road,
                                        Jinniu District, Chengdu, Sichuan, China
                                        Tel: 028-65523123, Fax: 028-65525125
                                        www.baclcorp.com



Note: This test report was prepared for the customer shown above and for the device described herein. It may not be
      duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp.
      (Chengdu). Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
      unlawful and offenders may be prosecuted to the fullest extent of the law. This report was valid only with a valid
      digital signature.


Bay Area Compliance Laboratories Corp. (Chengdu)




                                                    TABLE OF CONTENTS

GENERAL INFORMATION ....................................................................................................................... 3
 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................... 3
 OBJECTIVE .............................................................................................................................................. 3
 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................ 3
 TEST METHODOLOGY ............................................................................................................................... 4
 TEST FACILITY ......................................................................................................................................... 4
SUMMARY OF TEST RESULTS ............................................................................................................... 5

SYSTEM TEST CONFIGURATION ........................................................................................................... 6
  JUSTIFICATION ......................................................................................................................................... 6
  EUT EXERCISE SOFTWARE ...................................................................................................................... 6
  SUPPORT CABLE LIST AND DETAILS ........................................................................................................... 6
  BLOCK DIAGRAM OF TEST SETUP .............................................................................................................. 6
FCC§15.203 - ANTENNA REQUIREMENT ............................................................................................... 7
  APPLICABLE STANDARD ............................................................................................................................ 7
  ANTENNA CONNECTED CONSTRUCTION ..................................................................................................... 7
FCC §15.207 – AC LINE CONDUCTED EMISSION .................................................................................. 8
  EUT SETUP ............................................................................................................................................ 8
  EMI TEST RECEIVER SETUP ..................................................................................................................... 8
  TEST EQUIPMENT LIST AND DETAILS .......................................................................................................... 9
  TEST PROCEDURE ................................................................................................................................... 9
  CORRECTED AMPLITUDE & MARGIN CALCULATION ...................................................................................... 9
  TEST RESULTS SUMMARY ....................................................................................................................... 10
  TEST DATA ........................................................................................................................................... 10
FCC§15.225, §15.205 & §15.209 - RADIATED EMISSIONS TEST ......................................................... 13
  APPLICABLE STANDARD .......................................................................................................................... 13
  EUT SETUP .......................................................................................................................................... 13
  EMI TEST RECEIVER SETUP ................................................................................................................... 13
  CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................... 14
  TEST EQUIPMENT LIST AND DETAILS ........................................................................................................ 14
  TEST RESULTS SUMMARY ....................................................................................................................... 14
  TEST DATA ........................................................................................................................................... 14




Report No.: RXM170217051A                                                                                                           Page 2 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

GENERAL INFORMATION
Product Description for Equipment Under Test (EUT)
The INGENICO’s product, model number: Link/2500 CL/WiFi/BT (FCC ID: XKB-L2500CLWIBT)
(the "EUT") in this report was a Link/2500, which was measured approximately: 129 mm (L) x 70
mm (W) x 17 mm (H), rated input voltage: DC 3.7V from rechargeable Li-ion battery or DC 5V
from adapter.

Adapter information:
MODEL: PSAI05R-050QL6
INPUT: 100-240V ~ 0.3A 50-60Hz 11-15VA
OUTPUT: DC 5V, 1.0A MAX.

 *All measurement and test data in this report was gathered from final production sample, serial number:
 170217051 (assigned by the BACL, Chengdu). It may have deviation from any other sample. The EUT
 supplied by the applicant was received on 2017-02-17, and EUT conformed to test requirement.


Objective
This Type approval report is prepared on behalf of INGENICO in accordance with Part 2,
Subpart J, and Part 15, Subparts A and C of the Federal Communications Commission’s rules.

The objective is to determine the compliance of the EUT with FCC rules, sec 15.203, 15.205,
15.207, 15.209 and 15.225.

Related Submittal(s)/Grant(s)
FCC Part 15C DTS submissions with FCC ID: XKB-L2500CLWIBT.
FCC Part 15C DSS submissions with FCC ID: XKB-L2500CLWIBT.
FCC Part 15.407 NII submissions with FCC ID: XKB-L2500CLWIBT.




Report No.: RXM170217051A                                                                 Page 3 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

Test Methodology
All measurements detailed in this Test Report were performed in accordance with ANSI C63.10-
2013 “American National Standard of Procedures for Compliance Testing of Unlicensed Wireless
Devices”.

All emissions measurement was performed and Bay Area Compliance Laboratories Corp.
(Chengdu). The radiated testing was performed at an antenna-to-EUT distance of 3 meters.

The Bay Area Compliance Laboratories Corp. Chengdu’s measurement Uncertainties (calculated
for a k=2 Coverage Factor corresponding to approximately 95% Coverage) were as follows:

-For all of the AC Line Conducted Emissions Tests reported herein: ±3.17 dB.
-For of all of the Direct Antenna Conducted Emissions Tests reported herein: ±0.56 dB.

-For of all of the direct Radiated Emissions Tests reported herein are:
30 MHz to 200 MHz: ±4.7 dB;
200 MHz to 1 GHz: ±6.0 dB;
1 GHz to 6 GHz: ±5.13dB; and,
6 GHz to 40 GHz: ±5.47dB.
And the uncertainty will not be taken into consideration for all test data recorded in the report.


Test Facility
The test site used by BACL to collect test data is located in the No.5040, Huilongwan Plaza,
No.1, Shawan Road, Jinniu District, Chengdu, Sichuan, China.

Test site at BACL has been fully described in reports submitted to the Federal Communication
Commission (FCC). The details of these reports have been found to be in compliance with the
requirements of Section 2.948 of the FCC Rules on April 24, 2015. The facility also complies
with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2014.

The Federal Communications Commission has the reports on file and is listed under FCC
Registration No.: 560332. The test site has been approved by the FCC for public use and is
listed in the FCC Public Access Link (PAL) database.




Report No.: RXM170217051A                                                              Page 4 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

SUMMARY OF TEST RESULTS

            FCC Rules                     Description of Test                    Result

             §15.203                      Antenna Requirement                  Compliance
             §15.207                  AC Line Conducted Emission               Compliance
             §15.225
                                         Radiated Emission Test                Compliance
         §15.209 §15.205
            §15.225(e)                     Frequency Stability                Compliance*
            §15.215(c)                 20 dB Emission Bandwidth               Compliance*

      Note:
      Compliance*: the device is same PCB Layout with Model:LINK/2500 CL/3G/WiFi/BT, FCC ID:XKB-
      L2500CL3GWIBT, the differences between the original devices is depressing WWAN (2G/3G)
      function and replacing SIM to SAM function. The test items, please refer to the Model:LINK/2500
      CL/3G/WiFi/BT’s report: RXM160823052-00B




Report No.: RXM170217051A                                                             Page 5 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

SYSTEM TEST CONFIGURATION
Justification
The system was configured for testing in a test mode.

EUT Exercise Software
No software was performed under test.


Support Cable List and Details

      Cable                                             Length
                     Shielding Type     Ferrite Core             From Port       To
    Description                                           (m)
     USB Cable              no              no           1.1      Adapter        EUT


Block Diagram of Test Setup




Report No.: RXM170217051A                                                    Page 6 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

FCC§15.203 - ANTENNA REQUIREMENT
Applicable Standard
An intentional radiator shall be designed to ensure that no antenna other than that furnished by
the responsible party shall be used with the device. The use of a permanently attached antenna
or of an antenna that uses a unique coupling to the intentional radiator shall be considered
sufficient to comply with the provisions of this section.

Antenna Connected Construction
The EUT has one integral antenna arrangement, which was permanently attached and fulfill the
requirement of this section. Please refer to the EUT photos.
Result: Compliance.




Report No.: RXM170217051A                                                          Page 7 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

FCC §15.207 – AC LINE CONDUCTED EMISSION

EUT Setup




The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The
specification used was with the FCC Part 15.207 limits.
The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long
in the middle.
The spacing between the peripherals was 10 cm.
The adapter was connected to the Main LISN with AC 120 V/60 Hz power source.


EMI Test Receiver Setup
The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz.
During the conducted emission test, the EMI test receiver was set with the following
configurations:

                           Frequency Range                    IF B/W
                           150 kHz – 30 MHz                   9 kHz




Report No.: RXM170217051A                                                          Page 8 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

Test Equipment List and Details

                                                                 Serial      Calibration     Calibration
    Manufacturer            Description           Model
                                                                Number          Date          Due Date
  Rohde & Schwarz        EMI Test Receiver      ESCS 30      836858/0016     2016-12-02      2017-12-01
  Rohde & Schwarz             L.I.S.N.           ENV216         100018       2016-12-02      2017-12-01
  Rohde & Schwarz         PULSE LIMITER          ESH3Z2        DE14781       2016-10-31      2017-10-30
      Unknown             Conducted Cable       Unknown          NO.5        2016-11-10      2017-11-09
        R&S                Test Software         EMC32       Version8.53.0       N/A             N/A

* Statement of Traceability: BACL(Chengdu) attests that all of the calibrations on the equipment items
listed above were traceable to NIM or to another internationally recognized National Metrology Institute
(NMI), and were compliant with the NIST HB 150-2016 Normative Annex B “Implementation of traceability
policy in accredited laboratories”.


Test Procedure
During the conducted emission test, the adapter was connected to the outlet of the LISN.
Maximizing procedure was performed on the six (6) highest emissions of the EUT.
All data was recorded in the Quasi-peak and average detection mode.

According FCC publication number 174176,for a device with a permanent antenna operating at
or below 30 MHz, the measurements done with a suitable dummy load, in lieu of the permanent
antenna under the following conditions: (1) perform the AC line conducted tests with the
permanent antenna to determine compliance with the Section 15.207 limits outside the
transmitter's fundamental emission band; (2) retest with a dummy load in lieu of the permanent
antenna to determine compliance with the Section 15.207 limits within the transmitter's
fundamental emission band.


Corrected Amplitude & Margin Calculation

The basic equation is as follows:

VC = VR + AC + VDF

Herein,
VC: corrected voltage amplitude
VR: reading voltage amplitude

Ac: attenuation caused by cable loss

VDF: voltage division factor of AMN or ISN

The “Margin” column of the following data tables indicates the degree of compliance within the
applicable limit. For example, a margin of 7dB means the emission is 7dB below the maximum
limit. The equation for margin calculation is as follows:

        Margin = Limit – Corrected Amplitude
Report No.: RXM170217051A                                                                  Page 9 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

Test Results Summary
According to the recorded data in following table, the EUT complied with the FCC Part 15.207.

Test Data
    Environmental Conditions

          Temperature:            25.4 °C
     Relative Humidity:            50 %
        ATM Pressure:            95.9 kPa

    The testing was performed by Kevin Hu on 2017-03-06.




Report No.: RXM170217051A                                                        Page 10 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

   Test Mode: Transmitting

    AC 120V, 60 Hz, Line:


                        80

                        70

                                                                                                     Quasi-Peak Limit
                        60

                                                                                                        Average Limit
                        50
         Level in dBμ




                        40

                        30

                        20

                        10

                         0
                         150k      300    400 500     800 1M        2M     3M     4M 5M 6   8 10M          20M     30M

                                                                Frequency in Hz




    Frequency                   Quasi Peak          Bandwidth               Corr.      Margin    Limit
                                                                   Line                                          Comment
       (MHz)                     (dBμV)               (kHz)                 (dB)        (dB)    (dBμV)
     0.167702                      36.4               9.000         L1      19.7        28.7      65.1        Compliance
     0.468757                      34.0               9.000         L1      19.7        22.5      56.5        Compliance
     0.507637                      42.8               9.000         L1      19.7        13.2        56.0      Compliance
     1.310256                      30.2               9.000         L1      19.7        25.8        56.0      Compliance
     3.408946                      23.6               9.000         L1      19.7        32.4        56.0      Compliance
     4.997188                      28.0               9.000         L1      19.7        28.0        56.0      Compliance

    Frequency                    Average            Bandwidth               Corr.      Margin    Limit
                                                                   Line                                          Comment
       (MHz)                     (dBμV)               (kHz)                 (dB)        (dB)    (dBμV)
     0.465037                      27.6               9.000         L1      19.7        19.0      46.6        Compliance
     0.507637                      40.7               9.000         L1      19.7         5.3        46.0      Compliance
     0.629488                      29.8               9.000         L1      19.7        16.2        46.0      Compliance
     0.670921                      29.9               9.000         L1      19.7        16.1        46.0      Compliance
     1.015358                      24.6               9.000         L1      19.7        21.4        46.0      Compliance
     1.056628                      27.3               9.000         L1      19.7        18.7        46.0      Compliance




Report No.: RXM170217051A                                                                                        Page 11 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

    AC120 V, 60 Hz, Neutral:


                        80

                        70

                                                                                                     Quasi-Peak Limit
                        60

                                                                                                        Average Limit
                        50
         Level in dBμ




                        40

                        30

                        20

                        10

                         0
                         150k      300    400 500     800 1M        2M     3M     4M 5M 6   8 10M          20M     30M

                                                                Frequency in Hz




    Frequency                   Quasi Peak          Bandwidth               Corr.      Margin    Limit
                                                                   Line                                          Comment
       (MHz)                     (dBμV)               (kHz)                 (dB)        (dB)    (dBμV)
     0.461346                      32.2               9.000         N       19.6        24.5      56.7        Compliance
     0.487810                      34.2               9.000         N       19.6        22.0      56.2        Compliance
     0.507637                      38.2               9.000         N       19.6        17.8        56.0      Compliance
     0.536756                      33.8               9.000         N       19.6        22.2        56.0      Compliance
     1.239175                      34.7               9.000         N       19.6        21.3        56.0      Compliance
     1.289541                      35.5               9.000         N       19.6        20.5        56.0      Compliance

    Frequency                    Average            Bandwidth               Corr.      Margin    Limit
                                                                   Line                                          Comment
       (MHz)                     (dBμV)               (kHz)                 (dB)        (dB)    (dBμV)
     0.461346                      29.4               9.000         N       19.6        17.3      46.7        Compliance
     0.487810                      30.6               9.000         N       19.6        15.6        46.2      Compliance
     0.511698                      37.8               9.000         N       19.6         8.2        46.0      Compliance
     0.536756                      32.5               9.000         N       19.6        13.5        46.0      Compliance
     1.239175                      28.9               9.000         N       19.6        17.1        46.0      Compliance
     1.289541                      31.2               9.000         N       19.6        14.8        46.0      Compliance




Report No.: RXM170217051A                                                                                        Page 12 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

FCC§15.225, §15.205 & §15.209 - RADIATED EMISSIONS TEST
Applicable Standard
As per FCC Part 15.225
(a) The field strength of any emissions within the band 13.553–13.567 MHz shall not exceed
    15,848 microvolts/meter at 30 meters.
(b) Within the bands 13.410–13.553 MHz and 13.567–13.710 MHz, the field strength of any
    emissions shall not exceed 334 microvolts/meter at 30 meters.
(c) Within the bands 13.110–13.410 MHz and 13.710–14.010 MHz the field strength of any
    emissions shall not exceed 106 microvolts/meter at 30 meters.

(d) The field strength of any emissions appearing outside of the 13.110–14.010 MHz band shall
    not exceed the general radiated emission limits in §15.209.

EUT Setup




The radiated emission tests were performed in the 3-meter chamber test site, using the setup
accordance with the ANSI C63.10-2013. The specification used was the FCC Part Subpart C
limits.
The spacing between the peripherals was 10 cm.

EMI Test Receiver Setup
The system was investigated from 9 kHz to 1 GHz.
During the radiated emission test, the EMI test Receiver was set with the following configurations:

                   Frequency Range           RBW        Video B/W      Detector
                    9 kHz – 150 kHz         200 Hz         1 kHz          QP
                   150 kHz – 30 MHz          9 kHz        30 kHz          QP
                  30 MHz – 1000 MHz         120 kHz       300 kHz         QP


Report No.: RXM170217051A                                                          Page 13 of 15


Bay Area Compliance Laboratories Corp. (Chengdu)

Corrected Amplitude & Margin Calculation
The Corrected Amplitude is calculated by adding the Antenna Loss and Cable Loss, and
subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows:
       Corr. Ampl. = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain

The “Margin” column of the following data tables indicates the degree of compliance with the
applicable limit. For example, a margin of 7dB means the emission is 7dB below the maximum
limit. The equation for margin calculation is as follows:
       Margin = Limit - Corr. Ampl.


Test Equipment List and Details

                                                                Serial       Calibration Calibration
    Manufacturer          Description             Model
                                                               Number           Date      Due Date
       Agilent             Amplifier             8447D       2944A10442      2016-12-02 2017-12-01
      Rohde &
                      EMI Test Receiver           ESCI         100028        2016-12-02 2017-12-01
      Schwarz
   Sunol Sciences    Broadband Antenna             JB3         A121808       2016-04-10 2019-04-09
                          RF Cable
      Unknown                                    Unknown         NO.1        2016-11-10 2017-11-09
                        (below 1GHz)
                          RF Cable
      Unknown                                    Unknown         NO.4        2016-11-10 2017-11-09
                        (below 1GHz)
    The Electro-
                        Passive Loop
     Mechanics                                    6512        9706-1224      2014-11-30 2017-11-29
                          Antenna
     Company

   * Statement of Traceability: BACL(Chengdu) attests that all of the calibrations on the equipment
    items listed above were traceable to NIM or to another internationally recognized National Metrology
    Institute (NMI), and were compliant with the NIST HB 150-2016 Normative Annex B “Implementation
    of traceability policy in accredited laboratories”.


Test Results Summary
According to the data in the following table, the EUT complied with the FCC Part 15.209&15.225.


Test Data
    Environmental Conditions

                                           o
          Temperature:                 23.5 C
     Relative Humidity:                49 %
         ATM Pressure:                96.3 kPa

     * The testing was performed by Kevin Hu on 2017-03-05.

    Test mode: Transmitting



Report No.: RXM170217051A                                                                Page 14 of 15


    Bay Area Compliance Laboratories Corp. (Chengdu)

   1) Emissions (9 kHz~30 MHz):

                        Receiver               Rx
                                                             Cable   Amplifier    Corrected
  Frequency                                  Antenna                                             Limit     Margin
               Reading       Detector                         loss    Gain        Amplitude
    (MHz)                                     Factor                                           (dBμV/m)     (dB)
               (dBμV)      (PK/QP/AV)                         (dB)     (dB)       (dBμV/m)
                                             dB(1/m)
     13.56       58.6            QP           32.08          0.35      21.44        69.59       124.00     54.41
      8.91       32.1            QP           32.63          0.28      21.42        43.59        69.54     25.95
     27.12       30.2            QP           30.48          0.44      21.45        39.67       69.54      29.87
    13.553       32.4            QP           32.08          0.35      21.44        43.39       90.50      47.11
    13.567       32.7            QP           32.08          0.35      21.44        43.69       90.50      46.81
    13.121       27.4            QP           32.06          0.35      21.44        38.37       80.50      42.13
    13.956       28.0            QP           32.10          0.35      21.44        39.01       80.50      41.49

   2) Spurious Emissions (30 MHz -1 GHz):

                  Receiver               Rx Antenna
                                                               Cable    Amplifier   Corrected
Frequency                                                                                          Limit     Margin
             Reading      Detector      Polar     Factor        loss     Gain       Amplitude
  (MHz)                                                                                          (dBμV/m)     (dB)
             (dBμV)     (PK/QP/AV)      (H/V)    dB(1/m)        (dB)      (dB)      (dBμV/m)

  30.97       29.67         QP           H        22.09         0.32      28.57        23.51       40.00      16.49
 121.18       27.72         QP           H        15.74         0.82      28.13        16.15       43.50      27.35
 201.69       29.07         QP           H        13.13         0.93      27.76        15.37       43.50      28.13
 275.41       33.33         QP           H        13.81         1.26      27.49        20.91       46.00      25.09
 474.26       28.55         QP           H        17.97         1.60      28.66        19.46       46.00      26.54
 813.76       25.23         QP           H        21.98         2.31      28.41        21.11       46.00      24.89
  30.97       28.66         QP           V        22.09         0.32      28.57        22.50       40.00      17.50
  96.93       42.66         QP           V            9.88      0.49      28.32        24.71       43.50      18.79
 119.24       30.53         QP           V        15.35         0.73      28.15        18.46       43.50      25.04
 351.07       33.55         QP           V        15.30         1.34      27.83        22.36       46.00      23.64
 361.74       30.52         QP           V        15.70         1.49      27.93        19.78       46.00      26.22
 498.51       30.05         QP           V        18.11         1.61      28.81        20.96       46.00      25.04



                                      *****END OF REPORT*****




   Report No.: RXM170217051A                                                                     Page 15 of 15



Document Created: 2017-10-21 23:08:45
Document Modified: 2017-10-21 23:08:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC