RF Exposure

FCC ID: XKB-IWLTBB

RF Exposure Info

Download: PDF
FCCID_2426524

FCC Part 1 Subpart I FCC Part 2 Subpart J INDUSTRY CANADA RSS 102 ISSUE 3 RF EXPOSURE REPORT FOR Terminal MODEL NUMBER: IWL252 FCC ID: XKB-IWLTBB IC: 2586D-IWLTBB REPORT NUMBER: 10343507D ISSUE DATE: August 18, 2014 Prepared for Ingenico SA 1 Rue Claude Chappe BP 348, 07503 Guilerand-Granges, CEDEX, France Prepared by UL LLC 333 Pfingsten Rd. Northbrook, IL 60062 TEL: (847) 272-8800 NVLAP Lab code: 100414-0

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB Revision History Issue Rev. Date Revisions Revised By -- 08/18/14 Initial Issue M.Ferrer Page 2 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 6 5.1. FCC RULES ................................................................................................................ 6 5.2. IC RULES .................................................................................................................... 7 5.3. EQUATIONS................................................................................................................ 8 5.4. LIMITS AND IC EXEMPTION .....................................................................................10 6. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS .........................................11 6.1. FCC ............................................................................................................................11 6.2. INDUSTRY CANADA ..................................................................................................12 Page 3 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Ingenico SA 1 Rue Claude Chappe BP 348, 07503 Guilerand-Granges, CEDEX, France EUT DESCRIPTION: Bluetooth Transmitter MODEL: IWL252 SERIAL NUMBER: N/A DATE TESTED: June 1, 2014 – August 15, 2014 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass INDUSTRY CANADA RSS 102 ISSUE 3 Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Tested By: BART MUCHA MICHAEL FERRER Staff Engineer Program Manager UL Verification Services Inc. UL Verification Services Inc. Page 4 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. Document 10343507B for operation in the 2.4 GHz band Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. Page 5 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. Page 6 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 5.2. IC RULES IC Safety Code 6, Section 2.2.1 (a) A person other than an RF and microwave exposed worker shall not be exposed to electromagnetic radiation in a frequency band listed in Column 1 of Table 5, if the field strength exceeds the value given in Column 2 or 3 of Table 5, when averaged spatially and over time, or if the power density exceeds the value given in Column 4 of Table 5, when averaged spatially and over time. Page 7 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 5.3. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 8 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB MIMO AND COLOCATED TRANSMITTERS (IDENTICAL LIMIT FOR ALL TRANSMITTERS) For multiple chain devices, and colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the EIRP (in linear units) of each transmitter. Total EIRP = (EIRP1) + (EIRP2) + ... + (EIRPn) where EIRPx = Source-based time-averaged EIRP of chain x or transmitter x The total EIRP is then used to calculate the Power Density or the Distance as applicable. MIMO AND COLOCATED TRANSMITTERS For multiple colocated transmitters operating simultaneously in frequency bands where different limits apply: The Power Density at the specified separation distance is calculated for each transmitter chain or transmitter. The fraction of the exposure limit is calculated for each chain or transmitter as (Power Density of chain or transmitter) / (Limit applicable to that chain or transmitter). The fractions are summed. Compliance is established if the sum of the fractions is less than or equal to one. Page 9 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 5.4. LIMITS AND IC EXEMPTION VARIABLE LIMITS For mobile radio equipment operating in the cellular phone band, the lowest power density limit is calculated using the lowest frequency: 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) 824 MHz / 150 = 5.5 W/m^2 (IC). FIXED LIMITS For operation in the PCS band, the 2.4 GHz band and the 5 GHz bands: From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 2.2 Table 5 Column 4, S = 10 W/m^2 INDUSTRY CANADA EXEMPTION RSS-102 Clause 2.5.2 RF exposure evaluation is required if the separation distance between the user and the device’s radiating element is greater than 20 cm, except when the device operates as follows: •below 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 2.5 W; •at or above 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 5 W. Page 10 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 6. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS 6.1. FCC SAR test exclusion in accordance with KDB 447498. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0, for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. SAR Exclusion Calculations Table for Portable Devices (separation distance < 20cm) Frequency Avg Output power Separation Calculated Antenna Tx (MHz) dBm mW distances (mm) Threshold IFA BT 2440 4.14 3 5 0.9 1 0 0.0 1 0 0.0 Conclusion: The computed value is < 3; therefore, Bluetooth qualifies for Standalone SAR test exclusion. Page 11 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 10343507D DATE: August 18, 2014 FCC ID: XLB-IWLTBB IC: 2586D-IWLTBB 6.2. INDUSTRY CANADA Industry Canada notice 2013 DRS0911 states that the SAR exclusion limits contained in Draft RSS-102 issue 5 will be accepted prior to its release. The SAR exclusion table from Draft RSS- 102 issue 5 is reproduced below: The minimum antenna to user distance that will be encountered in normal use is 0mm. This results in an exemption limit of 4mW at 2450 MHz. As the maximum output power is 2mW (2.59mW EIRP) the DUT qualifies for SAR test exclusion. END OF REPORT Page 12 of 12 UL LLC FORM NO: CCSUP4701G 333 Pfingsten Rd., Northbrook, IL 60062 TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


Document Created: 2019-08-31 14:49:21
Document Modified: 2019-08-31 14:49:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC