Operational Description

FCC ID: XKB-IWL2XXGCL

Operational Description

Download: PDF
FCCID_1497849

                                                   FCC ID: XKB-IWL2XXGCL


                         OPERATIONAL DESCRIPTION

1.1.   EUT description




                                                               Page 1/4


FCC ID: XKB-IWL2XXGCL




            Page 2/4


                                                                                               FCC ID: XKB-IWL2XXGCL



1.2.     Related Submittal(s) / Grant(s)
All host equipment used in the test configuration are FCC granted, when relevant.


1.3.  Tested System Details
The FCC IDs for all equipment, plus description of all cables used in the tested system are:

      - Equipment under test (EUT):
      -
Maximum internal frequencies: 400MHz

                         Terminal                                                   Base
  -          IWL251-01T1541A                               -          IWL200-01B1326A
  Serial number: 10266WL40000167                           Serial number: none
  -
  -          IWL221-01T1539A
  Serial number: 11040WL40001106

Power supply interface :
1: 5Vdc (Through Micro-USB side connector)
2: 5Vdc (Through Base IWL 200)

   ID Power supply          Trademark              Ref                 Connector                        Cable
            PWS 1         SAGEM MONEL        FW 7650/151965               Jack                      Length : 200mm

            PWS 2            PHIHONG         PSA 105A-050                 µUSB                      Length : 200mm

            PWS 3            INGENICO        FW 7601/152171               µUSB                      Length : 200mm

            PWS 4            INGENICO        FW 7650L/05                  µUSB                      Length : 200mm
                                                                          µUSB
        PWS 5U               INGENICO        PSA C05R-050                                           Length : 200mm
                                                               (with adapter Jack <->µUsb)
        PWS 5J               INGENICO        PSA C05R-050                 Jack                      Length : 200mm

            PWS 6            INGENICO        FW 7601/152171               Jack                      Length : 200mm

            PWS 7            INGENICO        PSA 105A-050                 Jack                      Length : 200mm


        -     Input/output - Terminal:                             -   Input/output - Base:

- 1 x DC power input Micro USB (5Vdc )                     - 1 x DC power input Jack (5Vdc)
- 2 x SAM ports
- 1 x SIM port
- 1 x MicroSD card reader     (IWL250)
- 1 x Base connector (4 Pins)

         - Auxiliaries equipment used during test:         I/O cables used for testing:
         -                                                         -
- 2 x SAM Card                                                     - See Power supply description tab
- 1 x SIM Card
- 1 x Micro USB
- 2 x Smartcards (EFT Contactless and EMV card)




                                                                                                           Page 3/4


                                                                                             FCC ID: XKB-IWL2XXGCL

1.4.    Test Methodology
Both conducted and radiated testing were performed according to the procedures in ANSI C63.4-2009
FCC Part 15 Subpart B.
Radiated testing was performed at an antenna to EUT distance of 10 meters. During testing, all equipment’s and
cables were moved relative to each other in order to identify the worst case set-up.


1.5.   Test facility
                                       th        th
Tests have been performed from April 12 to May 27 , 2011.

This test facility has been fully described in a report and accepted by FCC as compliant with the radiated and AC
                                                                                 th
line conducted test site criteria in ANSI C63.4-2009 in a letter dated March 25 , 2008 (registration number 94821).
This test facility has also been accredited by COFRAC (French accreditation authority for European Union test lab
accreditation organization) according to NF EN ISO/IEC 17025, accreditation number 1-1633 as compliant with
test site criteria and competence in 47 CFR Part 15/ANSI C63.4 and EN55022/CISPR22 norms for 89/336/EEC
European EMC Directive application. All pertinent data for this test facility remains unchanged.




                                                                                                         Page 4/4



Document Created: 2011-06-28 11:39:02
Document Modified: 2011-06-28 11:39:02

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC