Operational Description - XKB-IUC15ZCL.pdf

FCC ID: XKB-IUC15ZCL

Operational Description

Download: PDF
FCCID_2745064

LCIE Laboratoire de Moirans Z.I. Centr’Alp 170, Rue de Chatagnon 38430 MOIRANS-FRANCE GENERAL INFORMATION FCCID: XKB-IUC15ZCL 1.1. Product description Data sheet of equipment

LCIE Laboratoire de Moirans Z.I. Centr’Alp 170, Rue de Chatagnon 38430 MOIRANS-FRANCE 1.2. Tested System Details Power supply: During all the tests, EUT is supplied by Vnom: 5VDC For measurement with different voltage, it will be presented in test method. Name Type Rating Reference / Sn Comments Supply1  AC  DC  Battery 5VDC - - Inputs/outputs – Cable: Length Declared Access Type Shielded Under test Comments used (m) <3m Access1 USB 2, 1 or 0.2    See EUT configuration §2.2 Access2 RS232 1    - Access3 Weak-UP 0.3    - Auxiliary equipment used during test: Type Reference Sn Comments Contactless Card - - - Antenna Loop C2040052 - - Spectrum Analyser A4060049 - - Laptop DELL - RF module: NC Frequency band: [13.553-13.567] MHz Sub-band REC7003: Annex 9 f1 RF mode: Transmitter Transceiver Receiver Standby Product class § 7.1.4 1 2 3 Antenna type: External: Internal: Antenna gain: NC dBi Extreme temperature range: Category: -30°C to +55°C Extreme test source voltage: ±10%: other: Vmin 4.75 VDC Vmax 5.25VDC EUT configuration Firmware / Software version of EUT: NC There are 2 configurations tests: - Configuration 1: The EUT is tested and powered by USB cable (Laptop Dell). The USB cable length is 0.2m. The reading “Cless” is activated. The others accesses are linked (RS232 and Weak-Up) - Configuration 2: The EUT is tested and powered by USB cable (Laptop Dell). The USB cable length is 2m. The reading “Cless” is activated. The others accesses are linked (RS232 and Weak-Up) The configuration with the 1 meter USB cable is not tested. The USB cables (extreme category) 0.2 and 2 meters are tested in pre-characterization.

LCIE Laboratoire de Moirans Z.I. Centr’Alp 170, Rue de Chatagnon 38430 MOIRANS-FRANCE 1.3. Test Methodology Both conducted and radiated testing were performed according to the procedures in ANSI C63.4-2003, FCC Part 15 Subpart C. Radiated testing was performed at an antenna to EUT distance of 10 meters. During testing, all equipment’s and cables were moved relative to each other in order to identify the worst case set-up. 1.4. Test facility Tests have been performed on from June 19th to 30th, 2015. This test facility has been fully described in a report and accepted by FCC as compliant with the radiated and AC th line conducted test site criteria in ANSI C63.4-2003 in a letter dated March 25 , 2008 (registration number 94821). This test facility has also been accredited by COFRAC (French accreditation authority for European Union test lab accreditation organization) according to NF EN ISO/IEC 17025, accreditation number 1-1633 as compliant with test site criteria and competence in 47 CFR Part 15/ANSI C63.4 and EN55022/CISPR22 norms for 89/336/EEC European EMC Directive application. All pertinent data for this test facility remains unchanged.


Document Created: 2015-09-04 08:53:03
Document Modified: 2015-09-04 08:53:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC