Users Guide

FCC ID: XKB-ISC250CL

Users Manual

Download: PDF
FCCID_1470199

Security of your terminal CAUTION: This equipment may not be modified, Your device fulfils current applicable PCI PED security altered, or changed in any way without signed requirements. written permission from Ingenico. Unauthorized Upon receipt of your terminal you should check for signs of modification may void the equipment authorization tampering of the equipment. It is strongly advised that these from the FCC and will void the Ingenico warranty. checks are performed regularly after receipt. You should check, ANTENNA REQUIREMENT for example: that the keypad is firmly in place; that there is no 47 CFR Section 15.203 evidence of unusual wires that have been connected to any This device ISC250 complies with Part 15 of the FCC ports on your terminal or associated equipment, the chip card Rules. Operation is subject to the following two reader or any other part of your terminal. Such checks would conditions: (1) This device may not cause harmful provide warning of any unauthorised modifications to your interference, and (2) this device must accept any terminal, and other suspicious behaviour of individuals that have interference received, including interference that access to your terminal. Your terminal detects any “tampered may cause undesired operation. state”. In this state the terminal will repeatedly flash the Installation Guide message” Alert Irruption!” and further use of the terminal will WARNING TO USERS IN THE CANADA: not be possible. If you observe the “Alert Irruption!” message, Operation is subject to the following two conditions: you should contact the terminal helpdesk immediately. (1) this device may not cause interference, and (2) You are strongly advised to ensure that privileged access to your this device must accept any interference, including terminal is only granted to staff that have been independently interference that may cause undesired operation of verified as being trustworthy. the device. CAUTION Positioning of the ISC250 on check stand must be in such a way To reduce potential radio interference to other users, the antenna type and its gain should be so Isc250 to make cardholder PIN (Personal Identification Number) spying chosen that the equivalent isotropically radiated infeasible. power (e.i.r.p.) is not more than that permitted for NEVER ask the customer to divulge their PIN Code. Customers successful communication. should be advised to ensure that they are not being overlooked when entering their PIN Code. SAFETY WARNING TO USERS IN THE UNITED STATES Federal Communication Commission Interference CAUTION: risk of explosion if the battery is Statement 47 CFR Section 15.105(b) replaced by an incorrect type. Dispose of used This equipment has been tested and found to comply with the battery according to the instructions limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable Connection of headset on audio output side protection against harmful interference in a residential installation. This equipment generates uses and can radiate jack ; An excessive acoustic pressure of radio frequency energy and, if not installed and used in headset can involve deafness! accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Only use the power supply AC/DC provided installation. If this equipment does cause harmful interference with iSC250 (8VDC, 2A or 8VDC, 3,6A) or the to radio or television reception, which can be determined by power provided by a cash register (16 Watt turning the equipment off and on, the user is encouraged to try min, 8V min) limited power source (LPS). to correct the interference by one of the following measures: Remove the DC power jack connector to ‐ Reorient or relocate the receiving antenna. power off the terminal. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐ Consult the dealer or an experienced radio/TV technician for help. NO UNAUTHORIZED MODIFICATIONS Ingenico – 190‐192 Avenue Charles de Gaulle Ingenico – 190‐192 Avenue Charles de Gaulle 92200 Neuilly sur Seine Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 *296106 92200 Neuilly sur Seine Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 900003392 R11 000 01

Equipment check list Troubleshooting Terminal Location Carefully inspect the shipping carton and its contents for shipping damage. If the device is damaged, file a Magnetic Card Reader Does Not Work Properly The ISC250 device may be mounted on a flat surface, 1. When sliding the card through the reader, make wall, or customer stand (recommended). claim immediately with the shipping company and notify Ingenico. sure that the magnetic stripe on the card is facing You should have : the ISC250 display screen (see Swiping a Magnetic Do not place the ISC250 device on a PC monitor, iSC250 Stylus The box may also include the following items depending Stripe Card). adjacent to an electronically active security tag This guide deactivation system, or near other sources of device on your configuration working: 2. Swipe the card at a faster or middle steady speed. magnetic fields. • Cable (specific to your connectivity requirements) 3. Inspect the magnetic stripe on the card to make The ISC250 device must be at least 12 inches away sure it is not scratched or badly worn. • Power supply unit 5. To determine if the problem is with the card: from an electronically active type of security tag a. If your host device has a magnetic stripe reader, deactivation pad. Save the carton and packing material for repackaging or moving the device in the future. Connect the cable to the try swiping the card there. There are two types of security tag deactivation HOST port before connecting the device to power. b. If you have another working ISC250 device, try systems: swiping the card there. • An electronically active system sends out a Power & Cable connections Stylus Pen Connection powerful and potentially disruptive signal to Device is not working deactivate the security tag. If the ISC250 device 1. Make sure that the ISC250 connector is is placed too close to the system’s pad, or placed fully inserted into the back of the device. above the pad, the signature capture files may 2. Restart the device. be corrupted. 3. If you have another working ISC250 • A passive system is a permanent magnet type device, swap the devices to determine if that does not send out a signal. This type does Turn the terminal. There is Two ports at the rear side: Insert the stylus connector into the ISC250 stylus port the problem is with the device, cable, POS, not affect the iSC250 device. one port on the back for ‐ audio out at the rear of the ISC250. or power supply. The device is designed to operate in the following power and communication. ‐ USB host 4. If the ISC250 device is directly connected environment: Connect the cable on the to a host, reset the host by turning it off • Operating temperature of 5°C to 40°C terminal. Connect the other and back on again. • Operating humidity of 10% to 90% RH non‐ end to the 3 power2 supply 1 unit. condensing Connect the power supply Changes or modifications to this device not The terminal is intended for internal use only. unit to the mains by the wall expressly approved by the party responsible for receptacle. Place the stylus into the cradle on the left hand‐side of the compliance could void the user's authority to operate ISC250 device, or insert it upright into the hole in the the equipment. Swiping a Magnetic Stripe Card cradle. More Information The ISC250 device’s For more information on cleaning, Contactless Reader Any liquid spill under the custom cover must be magnetic stripe reader removed right away. troubleshooting, operating the device, features, Bring the card firmly up to the reads debit, credit, and all active zone above the display specifications, accessories, the system menu, standard magnetic stripe (at about 1cm). Keep the card security, and downloading see the Ingenico cards. The main port at the back must not be used to iSC250 User Guide. close to the display during the connect a standard video HDMI cable. Only connect Take care to ensure that the card is inserted in the transaction. cables provided by Ingenico. correct manner (direction is marked on terminal). Slide the card from the rear to the front in a continuous Signature Handling motion for best results. The iSC250 can capture an electronic image of a customer's Smart Card Reader (SCR) signature for transactions Take care to ensure that the card that require a signature and is inserted in the correct manner, transmit to a host system . chip facing up (direction is The signature area displays on the screen for marked on terminal). transactions requiring a customer signature. Use the electronic stylus attached to the device. Ingenico – 190‐192 Avenue Charles de Gaulle Ingenico – 190‐192 Avenue Charles de Gaulle 92200 Neuilly sur Seine 92200 Neuilly sur Seine Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 Tél. 33(0)1 46 25 82 00 ‐ Fax 33 (0)1 47 72 56 95 900003392 R11 000 01


Document Created: 2011-02-25 14:55:19
Document Modified: 2011-02-25 14:55:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC