Test Report

FCC ID: XKB-IMP3XXCX

Test Report

Download: PDF
FCCID_1443857

Rapport d’essai / Test report N° 56834-R4-E JDE : 104369 DELIVRE A / ISSUED TO : INGENICO 1 Rue Claude Chappe B.P.348 07503 GUILHERAND GRANGES - FRANCE Objet / Subject : Essais de compatibilité électromagnétique conformément aux normes FCC CFR 47 Part 15, Subpart B. Electromagnetic compatibility tests according to the standards FCC CFR 47 Part 15, Subpart B Matériel testé / Apparatus under test : • Produit / Product : Terminal de paiement / Payement terminal • Marque / Trade mark : INGENICO • Constructeur / Manufacturer : INGENICO • Nom commercial / Marketing name ISMP • Type sous test / Model under test : IMP350-01T1450A & IMP320-01T1446A & IMP300-BCSN1476A • N° de série / serial number : PROTO1 & PROTO1 & PROTO1 • FCC ID / IMP350 & IMP320 : XKB-IMP3XX • FCC ID / IMP300 XKB-IMP3XXCX th th Date des essais / Test date : Du 11 au 24 Janvier 2011 / From January 11 to 24 , 2011 Lieu d’essai / Test location : LCIE SUD-EST ZI Centr’Alp – 170 rue de Chatagnon 38430 MOIRANS - FRANCE Test réalisé par / Test performed by : Anthony MERLIN Ce document comporte /Composition of document : 29 pages. MOIRANS, LE 18 MARS 2011 / MARCH 18TH, 2011 Ecrit par / Written by, Approuvé par / Approved by, Anthony MERLIN Jacques LORQUIN La reproduction de ce document n'est autorisée que sous sa forme intégrale. Toute reproduction partielle ou toute insertion de résultats dans un texte d'accompagnement en vue de leur diffusion doit recevoir un accord préalable et formel du LCIE. Ce document résulte d’essais effectués sur un spécimen, un échantillon ou une éprouvette. Il ne préjuge pas de la conformité de l’ensemble des produits fabriqués à l’objet essayé. Sauf indication contraire, la décision de conformité prend en compte l’incertitude de mesures. Il ne préjuge en aucun cas d’une décision de certification. This document shall not be reproduced, except in full, without t he written approval of the LCIE. This document contains results related only to the item tested. It does not imply the conformity of the whole production to the item tested .Unless otherwise specified; the decision of conformity takes into account the uncertainty of measures. This document does not anticipate any certification decision.

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 2 / 29 SUMMARY 1. TEST PROGRAM ................................................................................................................................... 3 2. SYSTEM TEST CONFIGURATION ........................................................................................................ 4 3. RADIATED EMISSION DATA ................................................................................................................. 6 4. CONDUCTED EMISSION DATA .......................................................................................................... 11 5. ANNEX 1 (GRAPHS) ............................................................................................................................ 14 6. TEST EQUIPMENT LIST ...................................................................................................................... 28 7. UNCERTAINTIES CHART .................................................................................................................... 29

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 3 / 29 1. TEST PROGRAM Standard: - FCC Part 15, Subpart B (Digital Devices) - ANSI C63.4 (2009) EMISSION TEST LIMITS RESULTS (Comments) Limits for conducted disturbance at mains Quasi-peak Average PASS Frequency ports value (dBµV) value (dBµV) 150kHz-30MHz 150-500kHz 66 to 56 56 to 46 0.5-5MHz 56 46 5-30MHz 60 50 Radiated emissions Measure at 3m PASS 30MHz-12.5GHz* 30MHz-88MHz : 40 dBµV/m 88MHz-216MHz : 43.5 dBµV/m 216MHz-960MHz : 46.0 dBµV/m Above 960MHz : 54.0 dBµV/m *§15.33: The highest internal source of a testing device is defined like more the highest frequency generated or used in the testing device or on which the testing device works or agrees. - If the highest frequency of the internal sources of the testing device is lower than 108 MHz, measurement must be only performed until 1GHz. - If the highest frequency of the internal sources of the testing device ranges between 108 MHz and 500 MHz, measurement must be only performed until 2GHz. - If the highest frequency of the internal sources of the testing device ranges between 500 MHz and 1 GHz, measurement must be only performed until 5GHz. If the highest frequency of the internal sources of the testing device is above 1 GHz, measurement must be only performed until 5 times the highest frequency or 40 GHz, while taking smallest of both.

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 4 / 29 2. SYSTEM TEST CONFIGURATION 2.1. JUSTIFICATION The system was configured for testing in a typical fashion (as a customer would normally use it). 2.2. HARDWARE IDENTIFICATION • Model: Commercial Name : ISMP Reference: o IMP320-01T1446A (No barcode) o IMP350-01T1450A (With barcode) model tested, worst case. o IMP300-BCSN1476A (Base) • Equipment under test (EUT): IMP350-01T1450A Serial number: PROTO1 & PROTO1 Base with power supply adaptor: PHIHONG PSC12A-050, 100-240VAC / 5A / 50-60Hz, output 5VDC / 2A (US plug) PHIHONG PSC12R-050, 100-240VAC / 5A / 50-60Hz, output 5VDC / 2A (Multi plug) Micro USB power supply adaptor: PHIHONG PSAC05R-050, 100-240VAC / 300mA / 50-60Hz, output 5VDC / 1A, No: 05 rev: 01. Internal max frequencies: o Clock: 400MHz • Input/output: - 2 x Power supply contacts (Base and Terminal) - 1 x Mini USB, only used for recharge with power supply PHIHONG PSAC05R-050 - 1 x Dock connector • Cables: - None • Auxiliaries equipment used during test: - 1 x Iphone 4, Apple, Sn: 85034FMKA4S, configuration: plane mode. • Functions: - 1 x Barcode, not used on base, tested only in configuration n°2. - 1 x CAM0, contact card reader, tested only in configuration n°2.

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 5 / 29 2.3. EUT CONFIGURATION Configuration n°1: Terminal on its base for recharge with following parameters (with or without Iphone plugged, worst case results presented): - Recharge of terminal - Recharge of Iphone - CAM0 (Contact card) OFF - Barcode OFF Configuration n°2: Software TestCem used on terminal, followings functions are tested in loop during all tests (with or without Iphone plugged, worst case results presented): - CAM0 (Contact card) - Barcode - Iphone plugged. Configuration n°3: Terminal plugged to power supply PHIHONG PSAC05R-050 for recharge with following parameters (with or without Iphone plugged, worst case results presented): - Recharge of terminal - Recharge of Iphone - CAM0 (Contact card) OFF - Barcode OFF 2.4. EQUIPMENT MODIFICATIONS None 2.5. SPECIAL ACCESSORIES None

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 6 / 29 3. RADIATED EMISSION DATA 3.1. CLIMATIC CONDITIONS th th Date of test : January 11 , 2011 and January 24 , 2011 Test performed by : A.MERLIN Atmospheric pressure : 993mb 981mb Relative humidity : 30% 31% Ambient temperature : 22°C 20°C 3.2. TEST SETUP The installation of EUT is identical for pre-characterization measurement in a 3 meters semi anechoic chamber and for measures on a 10 meters Open site. Configuration n°1

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 7 / 29 Configuration n°2 Configuration n°3

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 8 / 29 3.3. TEST SEQUENCE AND RESULTS 3.3.1. Pre-characterization [30MHz-2GHz] For frequency band 30MHz to 1GHz, a pre-scan of all the setup has been performed in a 3 meters semi anechoic chamber. The distance between EUT and antenna is 3 meters. Test is performed in horizontal (H) and vertical (V) polarization with a log-periodic antenna. The EUT is being rotated on 360° and on 3 axis during the measurement. Th e pre- characterization graphs are obtained in PEAK detection. For frequency band 1GHz to 2GHz, a search is performed in the semi-anechoic chamber in order to determine frequencies radiated by the EUT (Measuring distance reduced to 1m). See graphs for 30MHz-1GHz: H polarization Emr#1 Configuration n°1 (See annex 1) V polarization Emr#2 Configuration n°1 (See annex 1) H polarization Emr#3 Configuration n°2 – Axis XY (See annex 1) V polarization Emr#4 Configuration n°2 – Axis XY (See annex 1) H polarization Emr#5 Configuration n°2 – Axis Z (See annex 1) V polarization Emr#6 Configuration n°2 – Axis Z (See annex 1) H polarization Emr#7 Configuration n°3 – Axis XY (See annex 1) V polarization Emr#8 Configuration n°3 – Axis XY (See annex 1) H polarization Emr#9 Configuration n°3 – Axis Z (See annex 1) V polarization Emr#10 Configuration n°3 – Axis Z (See annex 1)

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 9 / 29 3.3.2. Characterization on 10 meters open site from 30MHz to 2GHz The product has been tested at a distance of 10 meters from the antenna and compared to the FCC part 15 subpart B §15.109 limits. Measurement bandwidth was 120kHz from 30 MHz to 1GHz and 1MHz from 1GHz to 2GHz. Antenna height search was performed from 1m to 4m for both horizontal and vertical polarization. Continuous linear turntable azimuth search was performed with 360 degrees range. Measurement performed on 3 axis of EUT. A summary of the worst case emissions found in all test configurations and modes is shown on clause 3.2 Worst case final data result: Configuration n°1: Frequency QPeak Limit Qpeak * Qpeak-Limit Angle Hgt Tot Corr No Pol Comments (MHz) (dBµV/m) (dBµV/m) (Margin, dB) (deg) (cm) (dB) 1 52.793 40.0 27.6 -12.4 210 V 100 11.5 2 144.286 43.5 28.9 -14.6 35 V 100 14.9 3 577.551 46.0 33.9 -12.1 180 V 150 23.2 4 630.345 46.0 31.8 -14.2 10 V 250 24.1 5 774.399 46.0 34.1 -11.9 45 V 200 26.5 *: Measure have been done at 10m distance and corrected according to requirements of 15.209.e) (M@3m = M@10m+10.5dB) Configuration n°2: Frequency QPeak Limit Qpeak * Qpeak-Limit Angle Hgt Tot Corr No Pol Comments (MHz) (dBµV/m) (dBµV/m) (Margin, dB) (deg) (cm) (dB) 1 58.919 40.0 25.3 -14.7 140 V 100 11.6 AXIS Z 2 325.008 46.0 38.7 -7.3 300 V 100 18.7 AXIS XY 3 352.541 46.0 38.9 -7.1 70 V 100 19.0 AXIS XY 4 375.009 46.0 42.3 -3.7 90 V 100 19.2 AXIS XY 5 425.012 46.0 38.9 -7.1 120 V 100 20.2 AXIS XY 6 500.019 46.0 39.0 -7.0 310 V 100 22.2 AXIS Z 7 625.009 46.0 38.6 -7.4 190 V 250 24.0 AXIS Z 8 875.027 46.0 39.6 -6.4 300 V 300 27.9 AXIS Z *: Measure have been done at 10m distance and corrected according to requirements of 15.209.e) (M@3m = M@10m+10.5dB) Configuration n°3: Frequency QPeak Limit Qpeak * Qpeak-Limit Angle Hgt Tot Corr No Pol Comments (MHz) (dBµV/m) (dBµV/m) (Margin, dB) (deg) (cm) (dB) 1 40.341 40.0 31.6 -8.4 190 V 100 13.3 AXIS Z 2 41.789 40.0 36.0 -4.0 135 V 100 12.9 AXIS Z 3 44.611 40.0 31.9 -8.1 95 V 100 11.7 AXIS Z 4 129.578 43.5 33.6 -9.9 185 H 250 14.8 AXIS Z 5 133.317 43.5 34.7 -8.8 15 H 200 14.6 AXIS XY 6 135.377 43.5 34.2 -9.3 55 H 300 14.4 AXIS XY 7 138.927 43.5 32.4 -11.1 345 H 200 14.2 AXIS XY 8 145.623 43.5 31.4 -12.1 255 V 150 13.7 AXIS Z 9 243.602 46.0 29.4 -16.6 220 V 100 14.8 AXIS XY 10 290.311 46.0 33.9 -12.1 45 V 150 16.1 AXIS XY *: Measure have been done at 10m distance and corrected according to requirements of 15.209.e) (M@3m = M@10m+10.5dB)

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 10 / 29 Frequency band 1GHz to 2GHz Measurements are performed using a PEAK and Average detection. (RBW = 1MHz) Configuration n°1: No Frequency Limit Measure Margin Angle Pol Ht Correc. Comments (GHz) Average Average (Mes-Lim) Table Ant. Ant. factor (dBµV/m) (dBµV/m) (dB) (deg) (cm) (dB) No Significant Frequency observed Note: Measures have been done at 3m distance. Configuration n°2: No Frequency Limit Measure Margin Angle Pol Ht Correc. Comments (GHz) Average Average (Mes-Lim) Table Ant. Ant. factor (dBµV/m) (dBµV/m) (dB) (deg) (cm) (dB) No Significant Frequency observed Note: Measures have been done at 3m distance. Configuration n°3: No Frequency Limit Measure Margin Angle Pol Ht Correc. Comments (GHz) Average Average (Mes-Lim) Table Ant. Ant. factor (dBµV/m) (dBµV/m) (dB) (deg) (cm) (dB) No Significant Frequency observed Note: Measures have been done at 3m distance. RESULTS: PASS 3.4. FIELD STRENGTH CALCULATION The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any) from the measured reading. The basic equation with a sample calculation is as follow: FS = RA + AF + CF – AG Where FS = Field Strength RA = Receiver Amplitude AF = Antenna Factor CF = Cable Factor AG = Amplifier Gain Assume a receiver reading of 52.5dBµV is obtained. The antenna factor of 7.4 and a cable factor of 1.1 are added. The amplifier gain of 29dB is subtracted, giving a field strength of 32 dBµV/m. FS = 52.5 + 7.4 + 1.1 – 29 = 32 dBµV/m The 32 dBµV/m value can be mathematically converted to its corresponding level in µV/m. Level in µV/m = Common Antilogarithm [(32dBµV/m)/20] = 39.8 µV/m.

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 11 / 29 4. CONDUCTED EMISSION DATA 4.1. CLIMATIC CONDITIONS th st Date of test : January 11 , 2011 and January 21 , 2011 Test performed by : A.MERLIN Atmospheric pressure : 993mb 991mb Relative humidity : 30% 31% Ambient temperature : 22°C 21°C 4.2. SETUP FOR CONDUCTED EMISSIONS MEASUREMENT The product has been tested according to ANSI C63.4-(2009) and FCC Part 15 subpart B. The product has been tested with 120V/60Hz power line voltage and compared to the FCC Part 15 subpart B §15.107. Measurement bandwidth was 9kHz from 150 kHz to 30 MHz. Measurement is made with a Rohde & Schwarz ESU8 receiver in peak mode. This was followed by a Quasi-Peak, i.e. CISPR measurement for any strong signal. If the average limit is met when using a Quasi-Peak detector, the EUT shall be deemed to meet both limits and measurement with the average detector is unnecessary. The LISN (measure) is 50Ω / 50µH. The Peak data are shown on plots in annex 1. Quasi-Peak and Average measurements are detailed in a table with frequencies and levels measured. Interconnecting cables and equipment's were moved to position that maximized emission. A summary of the worst case emissions found in all test configurations and modes is shown on the following page. 4.3. TEST SETUP The EUT is placed on the ground reference plane, at 80cm from the LISN. The distance between the EUT and the vertical ground plane is 40cm. Auxiliaries are powered by another LISN. The cable has been shorted to 1meter length. The EUT is powered trough the LISN (measure).

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 12 / 29 Configuration n°1 Configuration n°3

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 13 / 29 4.4. TEST SEQUENCE AND RESULTS Measurements are performed on the phase (L1) and neutral (N) of power line voltage. A measurement is also performed with a 50Ω dummy load replacing the transmitter antenna in order to demonstrate that some 13.56MHz may be cross-coupled to AC line connection. Graphs are obtained in PEAK detection. Measures are also performed in Quasi-Peak and Average for any strong signal. Configuration n°1: Measure on L1: graph Emc#1 (see annex 1) Measure on N: graph Emc#2 (see annex 1) Configuration n°3: Measure on L1: graph Emc#3 (see annex 1) Measure on N: graph Emc#4 (see annex 1) RESULT: PASS

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 14 / 29 5. ANNEX 1 (GRAPHS) RADIATED EMISSION Test configuration: 1 Graph name: Emr#1 Antenna position: Horizontal Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 337.160 27.4 581.000 31.6

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 15 / 29 RADIATED EMISSION Test configuration: 1 Graph name: Emr#2 Antenna position: Vertical Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 47.200 24.8 52.840 25.3 144.280 22.7 281.960 27.7 390.480 29.4 561.200 31.3 577.560 39.9 630.320 31.8 674.200 29.7 774.440 32.2

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 16 / 29 RADIATED EMISSION Test configuration: 2 Graph name: Emr#4 Axis XY Antenna position: Horizontal Barcode ON Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Frequency (MHz) Peak (dBµV/m) 275.040 30.5 324.920 33.0 374.920 35.9 424.960 31.5 499.920 32.5 524.880 31.4 624.960 34.8

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 17 / 29 RADIATED EMISSION Test configuration: 2 Graph name: Emr#5 Axis XY Antenna position: Vertical Barcode ON Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Frequency (MHz) Peak (dBµV/m) 275.000 31.7 324.920 36.0 374.920 40.4 424.960 36.6 499.920 32.9 625.000 34.3 750.000 31.8 875.040 32.0

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 18 / 29 RADIATED EMISSION Test configuration: 2 Graph name: Emr#6 Axis Z Antenna position: Horizontal Barcode ON Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Frequency (MHz) Peak (dBµV/m) 324.920 28.7 374.840 29.4 424.960 32.0

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 19 / 29 RADIATED EMISSION Test configuration: 2 Graph name: Emr#7 Axis Z Antenna position: Vertical Barcode ON Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Frequency (MHz) Peak (dBµV/m) 58.920 28.9 424.960 31.7 724.920 31.7 774.920 31.7 937.440 30.7

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 20 / 29 RADIATED EMISSION Test configuration: 3 Graph name: Emr#8 USB power supply Axis XY Antenna position: Horizontal Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 44.150 28.4 133.300 43.0 135.400 39.8 138.950 35.9 144.650 34.1 242.850 32.5

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 21 / 29 RADIATED EMISSION Test configuration: 3 Graph name: Emr#9 USB power supply Axis XY Antenna position: Vertical Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 39.800 38.8 41.600 39.0 44.550 38.9 48.900 32.0 133.700 37.6 243.350 39.3 290.300 38.5 355.250 34.1

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 22 / 29 RADIATED EMISSION Test configuration: 3 Graph name: Emr#10 USB power supply Axis Z Antenna position: Horizontal Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 44.900 30.9 129.600 36.8 136.250 34.7 360.300 35.0

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 23 / 29 RADIATED EMISSION Test configuration: 3 Graph name: Emr#11 USB power supply Axis Z Antenna position: Vertical Azimuth: 0° - 360° RBW/VBW: 120kHz / 300kHz Peak Measure QPeak Limit@3m 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Sous-bande 1 Frequency (MHz) Peak (dBµV/m) 40.250 38.2 41.850 38.2 44.600 38.0 132.850 38.1 145.250 37.0 241.650 35.6 290.200 35.4 310.650 35.0

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 24 / 29 CONDUCTED EMISSIONS Test configuration: Graph name: Emc#1 Base Voltage / Frequency 120V / 60Hz Line/Port Phase 1 Peak Measure QPeak Limit RBW / VBW : 9kHz / 30kHz Average Measure Average Limit 100 dBµV 0 150kHz 30MHz Fréquence (MHz) Sous-bande 1 Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) No frequency observed

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 25 / 29 CONDUCTED EMISSIONS Test configuration: Graph name: Emc#2 Base Voltage / Frequency 120V / 60Hz Line/Port Neutral Peak Measure QPeak Limit RBW / VBW : 9kHz / 30kHz Average Measure Average Limit 100 dBµV 0 150kHz 30MHz Fréquence (MHz) Sous-bande 1 Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) No frequency observed

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 26 / 29 CONDUCTED EMISSIONS Test configuration: Graph name: Emc#3 USB power supply Voltage / Frequency 120V / 60Hz Line/Port Phase 1 Peak Measure QPeak Limit RBW / VBW : 9kHz / 30kHz Average Measure Average Limit 100 dBµV 0 150kHz 30MHz Fréquence (MHz) Sous-bande 1 Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) No frequency observed

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 27 / 29 CONDUCTED EMISSIONS Test configuration: Graph name: Emc#4 USB power supply Voltage / Frequency 120V / 60Hz Line/Port Neutral Peak Measure QPeak Limit RBW / VBW : 9kHz / 30kHz Average Measure Average Limit 100 dBµV 0 150kHz 30MHz Fréquence (MHz) Sous-bande 1 Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) No frequency observed

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 28 / 29 6. TEST EQUIPMENT LIST CAL CAL USED N° LCIE TYPE COMPANY REF DATE DUE RADIATED EMISSION DATA x A7102024 Amplifier 1 - 8 GHz HEROTEK A1080304A 10/09 10/10 x A7486006 Amplifier 9kHz – 1300 MHz HEWLETT PACKARD 8447F 04/10 04/11 x C2040050 Antenna biconic EMCO 3104C 01/10 01/11 x C2040056 Antenna log-periodic EMCO 3146 01/10 01/11 x C2040146 Antenna Bi-Log XWing TESEQ CBL6144 03/10 03/12 x C2042027 Antenna horn EMCO 3115 09/09 09/10 x A5329038 Cable N/N - - 02/10 02/11 x A5329045 Cable N/N - - 12/09 12/10 x A5329056 Cable N/N - - 02/10 02/11 x A5329057 Cable N/N - - 02/10 02/11 x A5329061 Cable N/N SUCOFLEX 106G 12/09 12/10 x A5329188 Cable N/N OATS (Mast at 10m) UTIFLEX - 05/10 05/11 x A5329193 Cable N/N - - 02/10 02/11 x A5329199 Cable N/N OATS (Mast at 10m) UTIFLEX - 05/10 05/11 x A5329206 Cable N/N - - 02/10 02/11 x D3044015 Semi-Anechoic chamber #2 SIEPEL - 08/09 08/10 x D3044017 Semi-Anechoic chamber #3 SIEPEL - - - x A3169050 Radiated emission comb generator BARDET - - - x F2000409 OATS - - 08/10 08/11 x A4060030 Pre-selector RF HEWLETT PACKARD HP85685A - - x A2642019 Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 10/10 10/11 x A4060017 Spectrum analyzer HEWLETT PACKARD HP8568B 06/10 06/12 x A4060018 Spectrum Analyzer 9KHz – 26.5GHz HEWLETT PACKARD 8593E 02/10 02/11 x A4060019 Spectrum analyzer display HEWLETT PACKARD HP85662A 06/10 06/12 x A4060028 Spectrum analyzer display HEWLETT PACKARD HP85662A 06/10 06/12 x A4060029 Spectrum analyzer HEWLETT PACKARD HP8568B 06/10 06/12 x B4204052 Thermo-hygrometer HUGER - 04/10 04/12 x F2000371 Turntable chamber (Cage#3) ETS Lingren Model 2165 - - x F2000372 Turntable / Mast controller (OATS) ETS Lindgren Model 2066 - - x F2000392 Antenna mast (OATS) ETS Lindgren 2071-2 - - x F2000393 Turntable controller (Cage#2-3) ETS Lingren Model 2066 - - x F2000403 Turntable (OATS) ETS Lindgren Model 2187 - - x F2000404 Turntable chamber (Cage#2) ETS Lingren Model 2165 - - CONDUCTED EMISSION DATA x A7122167 Attenuator 10dB 18GHz 2W JFW - 02/10 02/11 x A5329352 Cable N/N - - 12/09 12/10 x D3044010 Faraday Cage RAY PROOF - 01/10 01/11 x A3169049 Conducted emission comb generator BARDET - - - x A2642019 Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 10/10 10/11

RAPPORT D'ESSAI / TEST REPORT N° 56834-R4-E Page : 29 / 29 7. UNCERTAINTIES CHART Incertitude élargie Incertitude laboratoire / limite du CISPR Type de mesure / Kind of measurement Wide uncertainty / CISPR laboratory uncertainty limit (k=2) ± x ±y Mesure des perturbations conduites en tension sur le réseau d’énergie 3.57 dB 3.6 dB Measurement of conducted disturbances in voltage on the power port Mesure des perturbations conduites en tension sur le réseau de télécommunication A l’étude / 3.28 dB Measurement of conducted disturbances in voltage on the telecommunication port. Under consid. Mesure des perturbations discontinues conduites en tension 3.47 dB 3.6 dB Measurement of discontinuous conducted disturbances in voltage Mesure des perturbations conduites en courant A l’étude / 2.90 dB Measurement of conducted disturbances in current Under consid. Mesure du champ électrique rayonné sur le site en espace libre de Moirans 5.07 dB 5.2 dB Measurement of radiated electric field on the Moirans open area test site


Document Created: 2011-03-18 15:43:58
Document Modified: 2011-03-18 15:43:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC