Test report 2 - DXX.pdf

FCC ID: XKB-D5000CLWIBT

Test Report

Download: PDF
FCCID_3298811

TEST REPORT N°: 143160-689135-A(FILE#916702) Version : 02 Subject Electromagnetic compatibility tests according to the standards: FCC CFR 47 Part 15, Subpart C RSS-210 Issue 8.1 Issued to INGENICO 9 Avenue de la Gare Rovaltain TGV 26300 VALENCE – FRANCE Apparatus under test  Product Payment terminal  Trade mark INGENICO  Manufacturer INGENICO  Model under test Desk/5000 CL/Eth/Mod/WiFi/BT  Reference TCA33310133A  Serial number 160587313331013301015984  FCCID XKB-D5000CLWIBT  IC 2586D-D5000CLWIBT Conclusion See Test Program chapter Test date August 2, 2016 to September 24, 2016 Test location MOIRANS IC Test site 6500A-1 & 6500A-3 Composition of document 29 pages Document issued on December 19, 2016 Written by : Approved by : Gaetan DESCHAMPS Anthony MERLIN Tests operator Technical manager This document shall not be reproduced, except in full, without the written approval of the LCIE. This document contains results related only to the items tested. It does not imply the conformity of the whole production to the items tested. Unless otherwise specified, the decision of conformity takes into account the uncertainty of measurement. This document doesn’t anticipate any certification decision.

PUBLICATION HISTORY Version Date Author Modification 01 September 24, 2016 Gaetan DESCHAMPS Creation of the document 02 December 19th, 2016 Gaetan DESCHAMPS Modification of the document further to review TEST REPORT N° 143160-689135-A Version : 02 Page 2/29

SUMMARY 1. TEST PROGRAM .................................................................................................................................... 4 2. SYSTEM TEST CONFIGURATION ......................................................................................................... 5 3. CONDUCTED EMISSION DATA ............................................................................................................. 9 4. RADIATED EMISSION DATA (15.209).................................................................................................. 11 5. FUNDAMENTAL FREQUENCY TOLERANCE (15.225E)...................................................................... 16 6. BAND-EDGE COMPLIANCE §15.209 ................................................................................................... 19 7. OCCUPIED BANDWIDTH ..................................................................................................................... 21 8. ANNEX 1 (GRAPHS) ............................................................................................................................. 23 9. UNCERTAINTIES CHART..................................................................................................................... 29 TEST REPORT N° 143160-689135-A Version : 02 Page 3/29

1. TEST PROGRAM Standard: - FCC Part 15, Subpart C - ANSI C63.10 (2013) - RSS-210 Issue 8.1 – Feb 2015 - RSS-Gen Issue 4 – Nov 2014 RESULTS EMISSION TEST LIMITS (Comments) Quasi-peak Average Limits for conducted disturbance Frequency  PASS value (dBµV) value (dBµV) at mains ports 150-500kHz 66 to 56 56 to 46  FAIL 150kHz-30MHz  NA 0.5-5MHz 56 46  NP CFR 47 §15.207 5-30MHz 60 50 Radiated emissions Measure at 300m  PASS 9kHz-30MHz 9kHz-490kHz : 67.6dBµV/m /F(kHz)  FAIL CFR 47 §15.209 (a) Measure at 30m  NA CFR 47 §15.225 490kHz-1.705MHz : 87.6dBµV/m /F(kHz)  NP RSS-Gen §4.9 1.705MHz-30MHz : 29.5 dBµV/m Radiated emissions 30MHz-25GHz* Measure at 3m  PASS CFR 47 §15.209 (a) 30MHz-88MHz : 40 dBµV/m  FAIL CFR 47 §15.225 88MHz-216MHz : 43.5 dBµV/m  NA RSS-Gen §4.9 216MHz-960MHz : 46.0 dBµV/m  NP Highest frequency : Above 960MHz : 54.0 dBµV/m (Declaration of provider) Fundamental field strength limit  PASS Operation within the band  FAIL CFR 47 §15.225  NA 13.110-14.010 MHz RSS-210 §A2.6  NP Fundamental frequency tolerance  PASS Operation within the band  FAIL CFR 47 §15.225  NA 13.110-14.010 MHz RSS-210 §A2.6  NP Band edge compliance  PASS Operation within the band  FAIL CFR 47 §15.225  NA 13.110-14.010 MHz RSS-210 §A2.6  NP  PASS Occupied bandwidth  FAIL No limit  NA RSS-Gen §4.6.1  NP  PASS Receiver Spurious Emission**  FAIL See RSS-Gen §4.10  NA RSS-Gen §4.10  NP *§15.33: The highest internal source of a testing device is defined like more the highest frequency generated or used in the testing device or on which the testing device works or agrees. - If the highest frequency of the internal sources of the testing device is lower than 108 MHz, measurement must be only performed until 1GHz. - If the highest frequency of the internal sources of the testing device ranges between 108 MHz and 500 MHz, measurement must be only performed until 2GHz. - If the highest frequency of the internal sources of the testing device ranges between 500 MHz and 1 GHz, measurement must be only performed until 5GHz. If the highest frequency of the internal sources of the testing device is above 1 GHz, measurement must be only performed until 5 times the highest frequency or 40 GHz, while taking smallest of both. **Testing covered the receive mode, and receiver spurious emissions are considered to be the same as transmitter. TEST REPORT N° 143160-689135-A Version : 02 Page 4/29

2. SYSTEM TEST CONFIGURATION 2.1. JUSTIFICATION The EUT can be used with different configuration :  Initial functionnalities  With option card (internal)  1 power supply o Cless Interface (RFID) o RS232-COM2 o PSM32W-080L6IN-R- o Bluetooth chipset: CSR8811 (CSR) o Jack Audio o SAM1 & SAM2 readers o SAM3 o Host or slave (µUSB connector) o Bluetooth chipset: CSR8811 (CSR) o USB Host (Type A connector) o Chipset Marvell 88W8782 o RS232 (COM1) o Modem RTC o Ethernet 2.2. HARDWARE IDENTIFICATION (EUT AND AUXILIARIES): Equipment under test (EUT): Desk/5000 CL/Eth/Mod/WiFi/BT Serial Number: 160587313331013301015984 Photography of EUT Power supply: During all the tests, EUT is supplied by Vnom: 8VDC For measurement with different voltage, it will be presented in test method. Name Type Rating Reference / Sn Comments Supply_P PHIHONG : PSM32W-080L6IN-  AC  DC  Battery 100-240V 50/60Hz - hihong R- TEST REPORT N° 143160-689135-A Version : 02 Page 5/29

Inputs/outputs - Cable: Length Declared Under Access Type used Shielded Comments <3m test (m) Input AC, 2 wires 1.8    Supply_Phihong Output DC, Jack 1.8    Power supply Jack Supply Terminal Twist cable to RJ11 COM0 2    Magicbox RJ45 Ethernet line RJ11 Modem line SAM1 SAM card / / /  / SAM2 SAM card / / /  / SAM3 SAM card / / /  / CAM0 SAM card / / /  / USB USB port (Micro-B) 1    / USB HOST USB port (Type A) 1    / MicroSD Micro SD port / / /  / COM2 Mini USB 1    / Audio Audio Jack 3.5mm 1    / Inputs/outputs & Cable: Magicbox 51/2014 CUST P/N: 296165425 INGELEC P/N : MUL0885C Length Declared Under Access Type Shielded Comments used (m) <3m test Supply Magicbox Power supply Jack 1.5    / COM0 RJ11 3    / Ethernet RJ45 5    / Modem RJ11 5    / Magicbox cable twisted Twist cable 2    / Auxiliary equipment used during test: Type Reference Sn Comments Contactless Card - - - TEST REPORT N° 143160-689135-A Version : 02 Page 6/29

Equipment information: Frequency band:  [13.553–13.567]MHz  [125]kHz [ - ] MHz Sub-band REC7003:  Annex 9 (j)  Annex 9 (a3)  Annex ( ) RF mode:  Transmitter  Transceiver  Receiver  Standby Type:  RFID  EAS  WPT  Other:  Narrowband  Wideband Bandwidth: (ISO15693, ISO18000-3…) (ISO14443, NFC…) Product class § 7.1.4 1 2 3 4 Receiver classification § 4.1.1: 1 2 3 Equipment intended for use as a  Fixed station  Mobile station Type of equipment:  Stand-alone  Plug-in  Combined Antenna Type:  External  Internal  Permanent  Permanent  Temporary Antenna connector:  None external internal (only for tests) Antenna Gain: NC dBi Duty cycle:  Continuous duty  Intermittent duty  Continuous operation Equipment type:  Production model  Prototype Tmin:  -20°C  0°C  °C Temperature range: Tnom: 20°C Tmax:  35°C  55°C  °C Type of power source:  AC power supply  DC power supply  Battery ( Select type) Vmin:  207V/50Hz  VDC Test source voltage: Vnom:  230V/50Hz  VDC Vmax  253V/50Hz  VDC NC : not communicated. 2.3. EUT CONFIGURATION Firmware / Software version of EUT: SDK_OS 03.20.08 - Configuration : Desk/5000-OP with contactless and option card - 3 x SAM - 2 x USB - CAM0 - Jack Audio (Flat Signal) - RS232-COM2 - RFID - Magicbox 51/2014 CUST P/N: 296100075 INGELEC P/N : MUL0885C o Power Supply_ ingenico o Modem RTC o Ethernet o RS232-COM1 TEST REPORT N° 143160-689135-A Version : 02 Page 7/29

2.4. EQUIPMENT MODIFICATIONS  None  Modification: 2.5. FIELD STRENGTH CALCULATION The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any) from the measured reading. The basic equation with a sample calculation is as follow: FS = RA + AF + CF – AG Where FS = Field Strength RA = Receiver Amplitude AF = Antenna Factor CF = Cable Factor AG = Amplifier Gain Assume a receiver reading of 52.5dBµV is obtained. The antenna factor of 7.4 and a cable factor of 1.1 are added. The amplifier gain of 29dB is subtracted, giving a field strength of 32 dBµV/m. FS = 52.5 + 7.4 + 1.1 – 29 = 32 dBµV/m The 32 dBµV/m value can be mathematically converted to its corresponding level in µV/m. Level in µV/m = Common Antilogarithm [(32dBµV/m)/20] = 39.8 µV/m. 2.6. CALIBRATION DATE The calibration intervals are extended at 12+2 months. This extended interval is based on the fact that there is sufficient calibration data to statistically establish a trend or based on experience of use of the test equipment to assure good measurement results for a longer period TEST REPORT N° 143160-689135-A Version : 02 Page 8/29

3. CONDUCTED EMISSION DATA 3.1. ENVIRONMENTAL CONDITIONS Date of test : September 23, 2016 Test performed by : Jonathan Sarto Atmospheric pressure (hPa) : 1003 Relative humidity (%) : 32 Ambient temperature (°C) : 20 3.2. TEST SETUP Mains terminals The EUT and auxiliaries are set:  80cm above the ground on the non-conducting table (Table-top equipment)  10cm above the ground on isolating support (Floor standing equipment) The distance between the EUT and the LISN is 80cm. The EUT is 40cm away for the vertical ground plane. The EUT is powered by Vnom. The EUT is powered through a LISN (measure). Auxiliaries are powered by another LISN. Test setup 3.3. TEST METHOD The product has been tested according to ANSI C63.10 and FCC Part 15 subpart C. The product has been tested with 120V/60Hz power line voltage and compared to the FCC Part 15 limits. Measurement bandwidth was 9kHz from 150kHz to 30MHz. This was followed by a Quasi-Peak, i.e. CISPR measurement for any strong signal. If the average limit is met when using a Quasi-Peak detector, the EUT shall be deemed to meet both limits and measurement with the average detector is unnecessary. The LISN (measure) is 50 / 50µH. The Peak data are shown on plots in annex 1. Quasi-Peak and Average measurements are detailed in a table with frequencies and levels measured. Interconnecting cables and equipment's were moved to position that maximized emission. A summary of the worst case emissions found in all test configurations and modes is shown on the following page. Measurements are performed on the phase (L1) and neutral (N) of power line voltage. Graphs are obtained in PEAK detection. Measures are also performed in Quasi-Peak and Average for any strong signal. TEST REPORT N° 143160-689135-A Version : 02 Page 9/29

3.4. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Cal_Date Cal_Due Cable + self - - A5329585 04/16 04/17 Conducted emission comb generator BARDET - A3169049 - - LISN RHODE & SCHWARZ ENV216 C2320123 02/16 02/17 LISN RHODE & SCHWARZ ENV216 C2320291 11/15 11/16 Load 50Ω - - A7152030 04/16 04/17 Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 A2642019 08/16 08/17 BAT EMC NEXIO v3.9.0.10 L1000115 - - Thermo-hygrometer (PM2) OREGON BAR916HG-G B4206011 09/15 09/16 Transient limiter RHODE & SCHWARZ ESH3-Z2 A7122204 01/16 01/17 3.5. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION  None  Divergence: 3.6. TEST RESULTS Measurements are performed on the phase (L1) and neutral (N) of the power line. Results: (PEAK detection) Measure on L1: graph Emc#1 (see annex 1) Measure on N: graph Emc#2 (see annex 1) 3.7. CONCLUSION Conducted emission data measurement performed on the sample of the product Desk/5000 CL/Eth/Mod/WiFi/BT, SN: 160587313331013301015984, in configuration and description presented in this test report, show levels below the FCC CFR 47 Part 15 and RSS-247 limits. TEST REPORT N° 143160-689135-A Version : 02 Page 10/29

4. RADIATED EMISSION DATA (15.209) 4.1. ENVIRONMENTAL CONDITIONS Date of test : August 4, 2016 Test performed by : Gaëtan DESCHAMPS Atmospheric pressure (hPa) : 1002 Relative humidity (%) : 31 Ambient temperature (°C) : 20 4.2. TEST SETUP The installation of EUT is identical for pre-characterization measures in a 3 meters semi- anechoic chamber and for measures on the 10 meters Open site. The EUT and auxiliaries are set:  80cm above the ground on the non-conducting table (Table-top equipment) - Below 1GHz  150cm above the ground on the non-conducting table (Table-top equipment) - Above 1GHz  10cm above the ground on isolating support (Floor standing equipment) The EUT is powered by Vnom. Test setup on OATS Test setup in anechoic chamber (Below 1GHz) TEST REPORT N° 143160-689135-A Version : 02 Page 11/29

Test setup in anechoic chamber (Above 1GHz) 4.3. TEST METHOD The product has been tested according to ANSI C63.10, FCC part 15 subpart C. Pre-characterisation measurement: (9kHz – 5GHz) A pre-scan of all the setup has been performed in a 3 meters semi-anechoic chamber for frequency from 30MHz to 5GHz. Test is performed in horizontal (H) and vertical (V) polarization, the loop antenna was rotated during the test to maximize the emission measurement. Continuous linear turntable azimuth search was performed with 360 degrees range. Measurement performed on all axis of EUT used in normal configuration. The pre-characterization graphs are obtained in PEAK detection and PEAK/AVERAGE from 1GHz to 2GHz. Characterization on 10 meters open site from 9kHz to 1GHz: Radiated Emissions were measured on an open area test site. A description of the facility is on file with the FCC. The product has been tested at a distance of 10 meters from the antenna and compared to the FCC part 15 subpart C limits. Measurement bandwidth was 9kHz below 30MHz and 120kHz from 30 MHz to 1GHz. Test is performed in horizontal (H) and vertical (V) polarization, the loop antenna was rotated during the test to maximize the emission measurement. The height antenna is varied from 1m to 4m. Continuous linear turntable azimuth search was performed with 360 degrees range. Measurement performed on all axis of EUT used in normal configuration. A summary of the worst case emissions found in all test configurations and modes is shown. Frequency list has been created with anechoic chamber pre-scan results. TEST REPORT N° 143160-689135-A Version : 02 Page 12/29

Characterization on 3 meters full anechoic chamber from 1GHz to 25GHz: The product has been tested at a distance of 3 meters from the antenna and compared to the FCC part 15 subpart C limits. Measurement bandwidth was 1MHz from 1GHz to 25GHz. Test is performed in horizontal (H) and vertical (V) polarization. Continuous linear turntable azimuth search was performed with 360 degrees range. Measurement performed on all axis of EUT used in normal configuration. A summary of the worst case emissions found in all test configurations and modes is shown.The height antenna is  On mast, varied from 1m to 4m  Fixed and centered on the EUT (EUT smaller than the beamwidth of the measurement antenna, ANSI C63.10 §6.6.5) Frequency list has been created with anechoic chamber pre-scan results. 4.4. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Cal_Date Cal_Due Amplifier 1-13GHz LCIE SUD EST - A7102067 04/16 04/17 Antenna Bi-log CHASE CBL6111A C2040051 06/16 06/18 Antenna horn 18GHz EMCO 3115 C2042027 11/15 11/16 Cable Measure @3m 18GHz - - A5329038 08/15 08/16 Cable Measure @3m - - A5329206 04/16 04/17 Cable Measure @1m STORMFLEX 0 A5329680 01/16 01/17 Cable Measure Analyzer-Amplifier SMA STORMFLEX 0 A5329681 05/16 05/17 Cable Measure @1m STORMFLEX 0 A5329682 01/16 01/17 Semi-Anechoic chamber #3 SIEPEL - D3044017 03/16 03/19 Radiated emission comb generator BARDET - A3169050 - - HF Radiated emission comb generator LCIE SUD EST - A3169088 - - OATS - - F2000409 06/15 06/16 Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 A2642019 04/16 04/17 Spectrum analyzer ROHDE & SCHWARZ FSV 30 A4060051 11/15 11/16 BAT EMC NEXIO v3.9.0.10 L1000115 - - Thermo-hygrometer (C3) OREGON BAR206 B4204078 04/16 04/17 Thermo-hygrometer (PM2) OREGON BAR916HG-G B4206011 09/15 09/16 Turntable chamber (Cage#3) ETS Lingren Model 2165 F2000371 - - Turntable / Mast controller (OATS) ETS Lindgren Model 2066 F2000372 - - Antenna mast (OATS) ETS Lindgren 2071-2 F2000392 - - Turntable (OATS) ETS Lindgren Model 2187 F2000403 - - Table MATURO Gmbh - F2000437 - - Table LCIE - F2000461 - - Turntable controller (Cage#3) ETS Lingren Model 2090 F2000444 - - 4.5. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION  None  Divergence: TEST REPORT N° 143160-689135-A Version : 02 Page 13/29

4.6. TEST RESULTS 4.6.1. Pre-characterization at 3 meters [9kHz-30MHz] See graph for 9kHz-30MHz band: Graph identifier Polarization EUT position Comments Emr# 1 0°/90° Axis XY See annex 1 See graphs for 30MHz-1GHz: Graph identifier Polarization Mode EUT position Channel Comments Emr# 2 H/V TX Axis XY Min See annex 1 4.6.1. Pre-characterization at 3 meters [1GHz-5GHz] See graphs for 1GHz-5GHz: Graph identifier Polarization Mode EUT position Channel Comments Emr# 3 H/V TX Axis XY Min See annex 1 4.6.2. Characterization on 10 meters open site below 30 MHz Worst case final data result: Frequency list has been created with semi-anechoic chamber pre-scan results. Measurements are performed using a QUASI-PEAK detection. No Frequency QPeak Limit Qpeak Margin Angle Pol Ht Correc. Comments (MHz) (dBµV/m) (dBµV/m) (Mes-Lim) Table Ant. Ant. Factor @ 30m @ 30m (dB) (deg) (cm) (dB) 1 13.56 84 46.1 37.9 120 0° 100 2 27.12 29.5 11.9 17.6 120 0° 100 Note: Measure have been done at 10m distance and corrected according to requirements of 15.209.e) (M@30m = M@10m-19.1dB) Limits Sub clause §15.225 Frequency (MHz) Field strength (µV/m) Measurement distance (m) 15 848 13.553-13.567 30 84 dBµV/m 13.410-13.553 334 30 13.567-13.710 50.5 dBµV/m 13.110-13.410 106 30 13.710-14.010 40.5 dBµV/m See following chapter of this test report for band edge measurements. TEST REPORT N° 143160-689135-A Version : 02 Page 14/29

4.6.3. Characterization on 10 meters open site from 30MHz to 1GHz Worst case final data result: Frequency list has been created with semi-anechoic chamber pre-scan results. Measurements are performed using a QUASI-PEAK detection. Test Meter Detector Polarit Azimuth Antenn Gain/Lo Transduc Level Limit Margi Remar Frequen Readin y a ss er n k cy g (Pk/QP/A (Degree Height Factor Factor (dBµV/ (dBµV/ (MHz) dB(µV) v) (V/H) s) (cm) (dB) (dB) m) m) (dB) 37,531 23,5 QP V 360 100 - 16,0 39,5 40,0 -0,5 40,680 25,2 QP V 360 100 - 14,3 39,5 40,0 -0,5 81,204 18,7 QP V 135 120 - 8,9 27,6 40,0 -12,4 467,497 22,9 QP V 280 100 - 21,3 44,2 46,0 -1,8 743,700 12,0 QP V 170 250 - 26,6 38,6 46,0 -7,4 960,000 15,6 QP H 61 100 - 30,2 45,8 46,0 -0,2 Note: Measure have been done at 10m distance and corrected according to requirements of 15.209.e) (M@3m = M@10m+10.5dB) 4.6.4. Characterization on 3meters anechoic chamber from 1GHz to 5GHz Worst case final data result: The frequency list is created from the results obtained during the pre-characterization in anechoic chamber. Measurements are performed using a PEAK and AVERAGE detection. No significant frequency observed. Note: Measures have been done at 3m distance. 4.7. CONCLUSION The sample of the equipment Desk/5000 CL/Eth/Mod/WiFi/BT, Sn: 160587313331013301015984, tested in the configuration presented in this test report satisfies to requirements of class B limits of the standard FCC Part 15 Subpart C, for radiated emissions. TEST REPORT N° 143160-689135-A Version : 02 Page 15/29

5. FUNDAMENTAL FREQUENCY TOLERANCE (15.225E) 5.1. ENVIRONMENTAL CONDITIONS Date of test : September 19, 2016 Test performed by : Gaëtan DESCHAMPS Atmospheric pressure (hPa) : 1024 Relative humidity (%) : 31 Ambient temperature (°C) : 20 5.2. TEST SETUP Frequency of carrier: 13.56 MHz Upper limit: 13.561356 MHz Lower limit: 13.558644 MHz The equipment (RF box) is set in a climatic chamber. Measure is performed on one channel of RF module. Test setup 5.3. TEST METHOD The frequency tolerance of the carrier signal shall be maintained within ±0.01% of the operating frequency when the temperature is varied from -20°C to +50°C at the nominal power voltage and the primary power voltage is varied from 85% to 115% of the rated supply voltage at 20°C. TEST REPORT N° 143160-689135-A Version : 02 Page 16/29

5.4. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Cal_Date Cal_Due Antenna Loop ELECTRO-METRICS EM-6879 C2040052 11/15 11/17 Cable SMA - 18G A5329373 10/15 10/16 Semi-Anechoic chamber #3 SIEPEL - D3044017 03/16 03/19 Climatic chamber BIA CLIMATIC CL 6-25 D1024032 01/00 Multimeter - CEM FLUKE 189 A1240171 03/16 03/17 Spectrum analyzer ROHDE & SCHWARZ FSV 30 A4060051 11/15 11/16 RSCommander R&S v1.6.4 L1000116 - - Thermometer (radio) FLUKE 52 II B4043150 - - Thermo-hygrometer (PM2) OREGON BAR916HG-G B4206011 09/15 09/16 5.5. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION  None  Divergence: TEST REPORT N° 143160-689135-A Version : 02 Page 17/29

5.6. TEST RESULTS Temperature -30°C -20°C 20°C +50°C Voltage Mains voltage: 110V/60Hz Frequency Drift (MHz) - 0.000008 - 0.000008 13.559521 - 0.000070 Carrier level (dBc) + 0.10 + 0.10 46.100000 - 0.10 Mains voltage: 93,5V/60Hz Frequency Drift (MHz) + 0.000034 + 0.000034 + 0.000000 - 0.000070 Carrier level (dBc) - 0.30 - 0.30 + 0.00 - 0.10 Mains voltage: 126V/60Hz Frequency Drift (MHz) + 0.000030 + 0.000030 + 0.000000 - 0.000080 Carrier level (dBc) - 0.30 - 0.30 + 0.00 - 0.20 Frequency drift measured is 114Hz when the temperature is varied from -30°C to +50°C and voltage is varied. 5.7. CONCLUSION The sample of the equipment Desk/5000 CL/Eth/Mod/WiFi/BT, Sn: 160587313331013301015984, tested in the configuration presented in this test report satisfies to requirements of the standard FCC Part 15 Subpart C, for fundamental frequency tolerance. TEST REPORT N° 143160-689135-A Version : 02 Page 18/29

6. BAND-EDGE COMPLIANCE §15.209 6.1. ENVIRONMENTAL CONDITIONS Date of test : September 21, 2016 Test performed by : Gaëtan DESCHAMPS Atmospheric pressure (hPa) : 1001 Relative humidity (%) : 30 Ambient temperature (°C) : 20 6.2. TEST SETUP For measurement, the power level calibration of the spectrum analyzer is related to the field strength measured in chapter radiated emission data. Test setup 6.3. TEST METHOD Frequency band 13.110-14.010MHz Following plots show radiated emission level in the frequency band 13.110-14.010MHz with a RBW of 9kHz and a quasi-peak detector. The graphs are obtained with a measuring receiver. Frequency band 13.553-13.567MHz Following plots show radiated emission level in the frequency band 13.55.-13.567MHz with a RBW of 1kHz. The graphs are obtained with a measuring receiver. TEST REPORT N° 143160-689135-A Version : 02 Page 19/29

6.4. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Cal_Date Cal_Due Antenna Loop ELECTRO-METRICS EM-6879 C2040052 11/15 11/17 Cable SMA - 18G A5329373 10/15 10/16 Semi-Anechoic chamber #3 SIEPEL - D3044017 03/16 03/19 Climatic chamber BIA CLIMATIC CL 6-25 D1024032 01/00 Multimeter - CEM FLUKE 189 A1240171 03/16 03/17 Spectrum analyzer ROHDE & SCHWARZ FSV 30 A4060051 11/15 11/16 RSCommander R&S v1.6.4 L1000116 - - Thermometer (radio) FLUKE 52 II B4043150 - - Thermo-hygrometer (PM2) OREGON BAR916HG-G B4206011 09/15 09/16 6.5. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION  None  Divergence: 6.6. TEST RESULTS Frequency band 13.553-13.567MHz 6.7. CONCLUSION Date:12.JAN.2016 17:00:42 The sample of the equipment Desk/5000 CL/Eth/Mod/WiFi/BT, Sn: 160587313331013301015984, tested in the configuration presented in this test report satisfies to requirements of the standard FCC Part 15 Subpart C, for band- edge compliance. TEST REPORT N° 143160-689135-A Version : 02 Page 20/29

7. OCCUPIED BANDWIDTH 7.1. ENVIRONMENTAL CONDITIONS Date of test : September 21, 2016 Test performed by : Gaëtan DESCHAMPS Atmospheric pressure (hPa) : 1001 Relative humidity (%) : 31 Ambient temperature (°C) : 20 7.2. SETUP  Conducted measurement: The EUT is turned ON and connected to measurement instrument; the center frequency of the spectrum analyzer is set to the fundamental frequency. The captured power is measured and recorded; the measurement is repeated until all frequencies required were complete.  Radiated measurement: The EUT is turned ON and connected to measurement instrument; the center frequency of the spectrum analyzer is set to the fundamental frequency. The captured power is measured and recorded; the measurement is repeated until all frequencies required were complete. Test setup Measurement Procedure: 1. RBW used in the range of 1% to 5% of the anticipated emission bandwidth 2. Set the video bandwidth (VBW) ≥ 3 x RBW. 3. Detector = Peak. 4. Trace mode = Max Hold. 5. Sweep = Auto couple. 6. Allow the trace to stabilize. 7. OBW 99% function of spectrum analyzer used TEST REPORT N° 143160-689135-A Version : 02 Page 21/29

7.3. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Cal_Date Cal_Due Antenna Loop ELECTRO-METRICS EM-6879 C2040052 11/15 11/17 Cable SMA - 18G A5329373 10/15 10/16 Semi-Anechoic chamber #3 SIEPEL - D3044017 03/16 03/19 Climatic chamber BIA CLIMATIC CL 6-25 D1024032 01/00 Multimeter - CEM FLUKE 189 A1240171 03/16 03/17 Spectrum analyzer ROHDE & SCHWARZ FSV 30 A4060051 11/15 11/16 RSCommander R&S v1.6.4 L1000116 - - Thermometer (radio) FLUKE 52 II B4043150 - - Thermo-hygrometer (PM2) OREGON BAR916HG-G B4206011 09/15 09/16 7.4. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION  None  Divergence: 7.5. TEST SEQUENCE AND RESULTS 99% Occupied Bandwidth Channel (kHz) 13.56 1.06 Date:12.JAN.2016 17:43:55 TEST REPORT N° 143160-689135-A Version : 02 Page 22/29

8. ANNEX 1 (GRAPHS) CONDUCTED EMISSIONS Graph name: Emc#1 Test configuration: Limit: EN 55022 Phase FCC Class: B Frequency range: [150kHz - 30MHz] Voltage / Frequency: 110VAC / 60Hz RBW : 10kHz Line: Phase VBW : 30kHz Spurious emissions Mes.QPea Mes.Avg- Frequency Mes.Peak Mes.QPea LimQP Mes.Avg LimAvg k-LimQP LimAvg Line (MHz) (dBµV) k (dBµV) (dBµV) (dBµV) (dBµV) (dB) (dB) 0.150 57.7 50.5 66.0 -15.5 32.2 56.0 -23.8 Phase 1 0.334 48.3 43.7 59.4 -15.7 39.4 49.4 -10.0 Phase 1 7.632 40.8 37.6 60.0 -22.4 30.2 50.0 -19.8 Phase 1 TEST REPORT N° 143160-689135-A Version : 02 Page 23/29

CONDUCTED EMISSIONS Graph name: Emc#2 Test configuration: Limit: EN 55022 Neutral FCC Class: B Frequency range: [150kHz - 30MHz] Voltage / Frequency: 110VAC / 60Hz RBW : 10kHz Line: Neutral VBW : 30kHz Spurious emissions Mes.QPea Mes.Avg- Frequency Mes.Peak Mes.QPea LimQP Mes.Avg LimAvg k-LimQP LimAvg Line (MHz) (dBµV) k (dBµV) (dBµV) (dBµV) (dBµV) (dB) (dB) 0.158 59.2 48.8 65.6 -16.8 33.6 55.6 -21.9 Phase 1 0.206 54.4 41.9 63.4 -21.5 33.3 53.4 -20.0 Phase 1 0.330 42.0 32.6 59.4 -26.9 23.7 49.4 -25.8 Phase 1 2.752 28.3 23.2 56.0 -32.8 16.9 46.0 -29.1 Phase 1 7.908 41.7 38.7 60.0 -21.3 31.9 50.0 -18.1 Phase 1 TEST REPORT N° 143160-689135-A Version : 02 Page 24/29

RADIATED EMISSIONS Graph name: Emr#1 Test configuration: Limit: FCC CFR47 Part15C (0°/90°) - Configuration 1 < 30MHz Class: Frequency range: [9kHz - 30MHz] Antenna polarization: Horizontal RBW : 100kHz Azimuth: 0° - 360° VBW : 300kHz 0° 90° 0° 90° Spurious emissions Frequency (MHz) Peak (dBµV/m) LimQP (dBµV/m) Peak-LimQP (dB) Polarization 13.559 77.2 69.5 7.7 0° 13.559 62.4 69.5 -7.2 90° TEST REPORT N° 143160-689135-A Version : 02 Page 25/29

RADIATED EMISSIONS Graph name: Emr#2 Test configuration: Limit: FCC CFR47 Part15C (H+V) - Configuration 1 <1GHz Class: Frequency range: [30MHz - 1GHz] Antenna polarization: Horizontal & Vertical RBW : 100kHz Azimuth: 0° - 360° VBW : 300kHz Spurious emissions Frequency (MHz) Peak (dBµV/m) LimQP (dBµV/m) Peak-LimQP (dB) Polarization 45.317 28.9 40.0 -11.1 Horizontal 88.871 29.0 43.5 -14.5 Horizontal 90.367 30.0 43.5 -13.5 Horizontal 403.760 31.1 46.0 -14.9 Horizontal 425.000 34.8 46.0 -11.2 Horizontal 467.520 35.1 46.0 -10.9 Horizontal 595.000 35.3 46.0 -10.7 Horizontal 637.480 34.1 46.0 -11.9 Horizontal 701.240 35.1 46.0 -10.9 Horizontal 743.760 35.4 46.0 -10.6 Horizontal 960.000 42.7 46.0 -3.3 Horizontal 31.377 36.2 40.0 -3.8 Vertical 37.531 43.2 40.0 3.2 Vertical 77.209 32.4 40.0 -7.6 Vertical TEST REPORT N° 143160-689135-A Version : 02 Page 26/29

Frequency (MHz) Peak (dBµV/m) LimQP (dBµV/m) Peak-LimQP (dB) Polarization 81.204 33.8 40.0 -6.2 Vertical 87.630 34.8 40.0 -5.2 Vertical 88.871 35.6 43.5 -7.9 Vertical 90.367 37.3 43.5 -6.2 Vertical 101.927 33.4 43.5 -10.1 Vertical 467.520 36.4 46.0 -9.6 Vertical 528.880 32.3 46.0 -13.7 Vertical 595.040 33.9 46.0 -12.1 Vertical 698.880 36.0 46.0 -10.0 Vertical 701.240 37.4 46.0 -8.6 Vertical 743.720 38.9 46.0 -7.1 Vertical 960.000 42.5 46.0 -3.5 Vertical TEST REPORT N° 143160-689135-A Version : 02 Page 27/29

RADIATED EMISSIONS Graph name: Emr#3 Test configuration: Limit: FCC CFR47 Part15C (H+V) - Configuration FCC >1GHz Class: Frequency range: [1GHz - 5GHz] Antenna polarization: Horizontal & Vertical RBW : 1MHz Azimuth: 0° - 360° VBW : 3MHz Spurious emissions Frequency (MHz) Peak (dBµV/m) LimM (dBµV/m) Peak-LimM (dB) Polarization 1897.250 44.5 54.0 -9.5 Horizontal 4894.100 43.9 54.0 -10.1 Horizontal 3468.250 41.0 54.0 -13.0 Vertical 4986.950 43.8 54.0 -10.2 Vertical TEST REPORT N° 143160-689135-A Version : 02 Page 28/29

9. UNCERTAINTIES CHART Incertitude élargie Incertitude laboratoire / limite du CISPR Type de mesure / Kind of measurement Wide uncertainty / CISPR laboratory uncertainty limit (k=2)  x y Mesure des perturbations conduites en tension sur le réseau d’énergie 3.51 dB 3.6 dB Measurement of conducted disturbances in voltage on the power port Mesure des perturbations conduites en tension sur le réseau de télécommunication A l’étude / 3.26 dB Measurement of conducted disturbances in voltage on the telecommunication port. Under consid. Mesure des perturbations discontinues conduites en tension 3.45 dB 3.6 dB Measurement of discontinuous conducted disturbances in voltage Mesure des perturbations conduites en courant A l’étude / 3.09 dB Measurement of conducted disturbances in current Under consid. Mesure du champ électrique rayonné sur le site en espace libre de Moirans 5.20 dB 6.3 dB Measurement of radiated electric field on the Moirans open area test site Les valeurs d’incertitudes calculées du laboratoire étant inférieures aux valeurs d’incertitudes limites établies par la norme, la conformité de l’échantillon est établie directement par les niveaux limites applicables. / The uncertainty values calculated by the laboratory are lower than limit uncertainty values defined by the standard. The conformity of the sample is directly established by the applicable limits values. TEST REPORT N° 143160-689135-A Version : 02 Page 29/29


Document Created: 2016-12-19 13:25:18
Document Modified: 2016-12-19 13:25:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC