RF Exposure Evaluation above 20 cm

FCC ID: XKB-AXIDOCKBT

RF Exposure Info

Download: PDF
FCCID_4211073

D-PL-12076-01-03 BNetzA-CAB-02/21-102 SAR Test exclusion documentation according to FCC KDB 447498, RSS-102 Report identification number: 1-6927/18-02-05 Exclusion (FCC_IC) Product: Axium Dock contains the module with the following certification numbers FCC ID XKB-AXIDOCKBT IC number 2586D-AXIDOCKBT HVIN (Hardware Version Identification Number) AXIUM DOCK /BT PMN (Product Marketing Name) Axium Dock FVIN (Firmware Version Identification Number) -/- HMN (Host Marketing Name) -/- This report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: cn=Alexander Hnatovskiy, o=CTC cn=Marco Scigliano, o=CTC advanced advanced GmbH, ou=HNA-161129, GmbH, ou=SCI-161125, email=Alexander.Hnatovskiy@ctcadvanc email=marco.scigliano@ctcadvanced.com, ed.com, c=DE c=DE 2019.03.18 08:43:23 +01'00' 2019.03.18 08:44:34 +01'00' Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC

Report no.: 1-6927/18-02-05 EUT technologies: Technologies: Max. rated power: (PEAK) Max. gain: Min. pathloss: Bluetooth LE measured max: -2.5 dBm 3.1 dBi 0 dB (if applicable) Note: Bluetooth LE test results see CTC advanced test report 1-6927/18-02-02 SAR test exclusion according to KDB447498 (General RF Exposure Guidance v06) Equation from Chapter 4.3.1: Standalone SAR test exclusion considerations page 11 and ff. (1) Standalone SAR test exclusion for 100 MHz to 6 GHz at test separation distances ≤ 50mm ( Threshold1-g;10-g ) × dseperation / f 0.5 where Threshold1-g;10-g is 3 for 1-g; 7.5 for 10-g dseperation is the min. test separation distance; 5mm is used if the distance is less f is the RF channel transmit frequency The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. frequency dseparation Powerlimit Pmax-declared Threshold1-g Exclusion [MHz] [mm] [mW] [dBm] [mW] 2402.00 5 3 9.68 0.60 1.15 yes SAR test exclusion according to RSS-102 Issue 5 Section 2.5.1/Table 1 The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. frequency dseparation Powerlimit Pmax-declared tissue volume Exclusion [MHz] [mm] [mW] [dBm] [mW] 2402.00 5 1g 4.00 0.60 1.15 yes © CTC advanced GmbH Page 2 of 2


Document Created: 2019-03-18 08:44:34
Document Modified: 2019-03-18 08:44:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC