Antenna Information

FCC ID: XGS-6014901

RF Exposure Info

Download: PDF
FCCID_1125644

Impexa 2.4 GHz SMD Antenna Product Specification 1 Features • Designed for 2.4 GHz applications [Bluetooth™, WiFi™ (802.11b/g), Zigbee™, WiMedia™ etc.] • Intended for SMD mounting • Supplied in tape on reel 2 Description The Impexa antenna is intended for use with all 2.4 GHz applications. The antenna requires a groundplane, i.e. your device acts as an active part of the antenna and thus demand careful consideration concerning its placement 3 Application • Mobile phones • PDAs • Headsets • PC-Cards • CF-Cards Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna Contents 1 Features 1 2 Description 1 3 Application 1 4 Model name 3 5 General data 3 6 Electrical characteristics 3 7 Electrical performance 4 7-1 Return loss 4 7-2 Smith diagram 4 7-3 Radiation patterns 4 8 Antenna Dimensions 5 9 Antenna Foot print 5 10 Electrical interface 6 10-1 Transmission line and matching 6 10-2 Test board dimensions 6 10-3 Test board matching 6 11 Soldering 7 11-1 Recommended soldering conditions 7 11-2 Leadfree soldering 7 12 Reliability 7 12-1 Temperature and Humidity 7 12-2 Mechanical 8 12-3 Miscellaneous 8 12-4 Judgement standard 8 13 Hazardous Material Regulation Conformance 8 14 Application example 9 15 Packaging 10 15-1 Shelf storage recommendation 10 15-2 Tape characteristics 10 15-3 Reel dimension 10 15-4 Box dimension 11 15-5 Bag properties 11 15-6 Reel label information 11 Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 4 Model name 30 30 A6150 - 01 30 30 A6250 - 01 Drawing No. Drawing No. Technology Technology -PCB -PCB Antenna Family Antenna Family -SMD -SMD Left feeding Right feeding 6150 6250 5 General data Product Name Impexa 2.4 GHz 3030A6150-01 Left Article No. 3030A6250-01 Right Frequency 2.4-2.5 GHz Polarization Linear Operating temperature -40 to + 85 degC 6 Electrical characteristics Characteristics Conditions* Min Typ Max Peak Gain -1.0 dBi 0.2 dBi 0.9 dBi Frequency 2.4-2.5 GHz, Measured in 3D chamber Efficiency 50% 55% 60% (near field) VSWR 1.3 : 1 1.5 : 1 1.9 : 1 Frequency 2.4-2.5 GHz, Measured in Network Analyzer *Note all data provided in this table are based on the Antenova reference board Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 7 Electrical performance 7-1 Return loss 7-2 Smith diagram 7-3 Radiation patterns 0 0 10 10 0 0 -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 vertical pol phi 9 90 270 -80 90 -80 horiz pol phi 90 270 horiz pol phi 0 total field phi 90 vert pol phi 0 total field phi 0 0 10 180 0 180 -10 Phi 0 at 2.45 GHz -20 Phi 90 at 2.45 GHz -30 -40 -50 -60 -70 horiz pol theta 90 -80 90 vert pol theta 90 270 total field theta 90 180 Theta 90 at 2.45 GHz Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 8 Antenna Dimensions Left variant Right variant (Art. No :3030A6150-01) (Art.No :3030A6250-01) L W H F S I J K O Length Width Height Feed Solder 6.1 ±0.2 3.9 ±0.2 1.1±0.15 1.0±0.1 1.3±0.1 0.35±0.1 3.4±0.1 0.3±0.15 Dimensions in millimeters 9 Antenna Foot print Left variant Right variant (Art. No :3030A6150-01) (Art.No :3030A6250-01) S F K I M N O* P Pad 1.0±0.1 1.0±0.1 3.4±0.1 1.3±0.1 0.5±0.2 1.6±0.05 1.9±0.05 >2 Dimensions in millimeters Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 10 Electrical interface 10-1 Transmission line and matching The matching network has to be individually designed using one, two or three components. t, w = Unique dimensioning according to your PCB * C = Inductor and capacitor values according to your specific device* * Antenova provides this service upon request 10-2 Test board dimensions antenova ® The testboard is designed for evaluation purposes for Impexa 2.4 GHz SMD antenna. The card has the same size as a typical compact flash card and is fitted with an U/FL connector from Hirose. 10-3 Test board matching Series Inductor 2.2 nH Shunt inductor 1.8 nH Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna The testboard is matched with above specified component. Note! The component value(s) will vary depending on size of PCB, surrounding components etc. 11 Soldering 11-1 Recommended soldering conditions 11-2 Leadfree soldering The antenna has been tested and approved for leadfree soldering. The reflow curve and solder paste used is listed below. Solder paste: KOKI S3X58-M405 12 Reliability 12-1 Temperature and Humidity Item Standard Low High Duration Operating EN/IEC 60068-2-2, -30 degC +90 degC - temperature Test Bd: Dry heat Temperature EN/IEC 60068-2-14, -40 degC +90 degC 500 cycles / 10 min cycling Test Na: Change of temperature Storage life EN/IEC 60068-2-1, +60 degC / 90% RH 500 h Humidity Test Ca: Damp heat Storage life EN/IEC 60068-2-1, -55 degC - 500 h Low temperature Test Ad: Cold Storage life EN/IEC 60068-2-2, - +125 degC 500 h High temperature Test Bb: Dry heat Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 12-2 Mechanical Item Standard Low High Duration Bending 1 mm at a rate of 1 mm/s with IEC 60068-2-21, support at end of PCB Bending Test Ue1: Bending 1mm depth on reference board IEC 60068-2-21, Force of 5 N applied to the side of the Shear Test Ue3: Shear antenna. Dummy weight: 150g One drop at each side, Drop test Height: 170cm total drops: 6 Acceleration spectral density:10-1000Hz EN/IEC 60068-2-6, Vibration Acceleration: 20m/s2 5 cycles per axis Test Fc (sinusoidal) Number of axes: 3 mutually perpendicular 12-3 Miscellaneous Item Standard Low High Duration Acceleration spectral density:10-1000Hz EN/IEC 60068-2-6, Vibration Acceleration: 20m/s2 5 cycles per axis Test Fc (sinusoidal) Number of axes: 3 mutually perpendicular Dummy weight: 150g One drop at each side, Drop test Height: 170cm total drops: 6 12-4 Judgement standard The judgement of the above tests should be made as follows: 1. Visual inspection - Normal apperance with no obvious cracking, peeling-off. 2. Electrical inspection - The DUT satisfies the VSWR specification throughout the 2.4-2.5 GHz band 13 Hazardous Material Regulation Conformance Cadmium and cadmium compound. Lead and lead compound Organic brominated compound (PBB, PBDE) Mercury and mercury compound Polychlorinated biphenyl (PCB) Sexivalent chrome compound Polychlorinated naphthalene (PCN) Chlorinated paraffin (CP) Organic tin compound Mirex Asbestos Formaldehyde Azo compound Tetra-bromo-bisphenol-A-bis (TBBP-A-bis) Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 14 Application example 6 Front Surface 3 Back Surface 7 4 G G 2.4 GHz 5 Radio 2 1 7 G G C C The antenna is of a quarter wave type and is dependent on the groundplane area to complete the antenna function. The antenna performance is also dependent on the size of the groundplane and the tranparent area. 1. Placement of the antenna The antenna shall be placed on a transparent area without underlying groundplane at the edge of the PCB oriented as above. Groundplane area surrounding the antenna should be with a clearence of G=3-5 mm 2. Placement of 2.4 GHz module To avoid losses in the strip line, the module shall be placed as close to the antenna as possible. 3. Strip line The strip line must be dimensioned according to your specific PCB. (see fig 1). No crossing strip lines are allowed between the strip line and its ground plane. 4. Via Connections To avoid spurious effects via connections must be made to analogue ground. 5. Component matching Component values are depending on antenna placement, PCB dimensions and location of other components. 6. DC Block Might be needed depending on RF Module configuration. 7. Clearance No components allowed within the clearence area with a minimum distance to other components, C= 3-5 mm. Note ! Incorrect implementation of the antenna will affect the performance. Contact Antenova for implementation services. Integrated Antenna Solutions  Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 15 Packaging 15-1 Shelf storage recommendation Temperature -10 to +40 degree C Humidity Less than 75% RH Shelf Life 18 Months Storage place Away from corrosive gas and direct sunlight 15-2 Tape characteristics ® ® ® ® antenova antenova antenova antenova W F E1 P0 P1 P2 A0 B0 K0 T D0 D1 24±0.3 11.5 ±0.1 1.75±0.1 4.0±0.1 8.0±0.1 2.0±0.1 4.3±0.1 6.6±0.1 1.5±0.1 0.3±0.05 1.5±0.1 1.5±0.1 Dimensions in millimeters Quantity Leading space Trailing space 1000 pcs / reel 50 blank antenna holders 37 blank antenna holders 15-3 Reel dimension Material: Conductive Polystyrene Width [mm] W: 24 Reel dia [mm] D: 180(7”) Hub dia [mm] H: 50(2”) Shaft dia [mm] C: 13 Integrated Antenna Solutions 10 Product Specification AE040034-B

Impexa 2.4 GHz SMD Antenna 15-4 Box dimension antenova ® Antenova Material: Cardboard Width [mm] W: 195 Breadth [mm] B: 195 Thickness [mm] H: 37 15-5 Bag properties Antistatic Aluminium Moisture Barrier Bag Thickness [mil] T: 3.2 15-6 Reel label information antenova ® Antenova Integrated Antenna Solutions 11 Product Specification AE040034-B

www.antenova.com Corporate Headquarters Asia Headquarters Antenova Ltd. Antenova Asia Ltd. Far Field House 3F, No 10, Alley 6, Lane 45 Albert Road Poa Shing Road Stow-cum-Quy Hsin Tien City Cambridge Taipe County CB9 5AR ROC 23145 Tel: +44 (0) 1223 810600 Tel: +886 (0) 2 2917 6536 Fax: +44 (0) 1223 810650 Fax: +886 (0) 2 2910 6546 Email: info@antenova.com Email: info@antenova.com Sales Offices Europe America Asia Charlotta Olander David Nuti CL Lim UK/EU Sales Manager NA Sales Manager VP Sales Asia Tel: +46 702 913731 Tel: +1 214 668 0357 Tel: +886 (0) 931 201 318 Email: Lotta.Olander@antenova.com Email: David.Nuti@antenova.com Email: CL.Lim@antenova.com Integrated Antenna Solutions 12 Product Specification AE040034-B


Document Created: 2006-11-02 10:48:06
Document Modified: 2006-11-02 10:48:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC