Modular Request Letter

FCC ID: XEU2703240

Cover Letter(s)

Download: PDF
FCCID_1169057

                                                                               Jason Heimer
                                                                              Program Manager
                                                                             Government Systems
                                                                            Suface Solutions



                                                                          400 Collins Road NE
                                                                         Cedar Rapids, IA 52498
                                                                        319.295.0521
JJHeimer@rockwellcollins.com




September 11, 2009


Federal Communications Commission
Authorization and Evaluation Division
1435 Oakland Mills Road
Columbia, MD 21046


Subject: Limited Module Approval for XEU2703240



To Whom It May Concern:



Rockwell Collins Inc hereby requests a Limited Module Approval as provided in Section
15.212 of the FCC Rules. The requirements of this section have been fulfilled as follows:

     •    15.212(a)(1)(i); Requirement of RF Shielding: The module meets the radiated
          emissions limits of sections 15.209 and 15.249 of the FCC Rules.

     •    15.212(a)(1)(ii); Requirement of Buffered Input: The module does not provide a
          direct data input to the modulator.

     •    15.212(a)(1)(iii); Requirement of Power Supply Regulation: The module incorporates
          its own regulators, which are denoted as PS1, U505 and U506 (Carrier Board) and
          U66, U91, and U71 (Transceiver Boards) in the documentation

     •    15.212(a)(1)(iv); Antenna Requirement: The module incorporates a permanently
          attached antenna.

     •    15.212(a)(1)(v); Stand-Alone Test Configuration: The module was tested in a
          standalone test configuration as described in the test report.

     •    15.212(a)(1)(vi)(A); Labeling Requirement: The module will be labeled with its own
          FCC identification number, and the device into which the module is installed will
          display a label referring to the enclosed module. A picture of the external label is
          included with the documentation.


[Recipient’s name]
Date
RE:
Page 2 of 2




      •   15.212(a)(1)(vii); Operating Requirements: The module meets the specific rules for
          this type of transceiver, and the User’s Manual contains instructions for maintaining
          compliance.

      •   15.212(a)(1)(vii); RF Exposure: The module complies with RF exposure
          requirements as demonstrated in the test report.



Sincerely,




Jason J. Heimer

Program Manager

Rockwell Collins



Document Created: 2009-09-11 11:39:34
Document Modified: 2009-09-11 11:39:34

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC