I19Z60566-EMC01_Report FCC 15B Rev1

FCC ID: XD6U304AA

Test Report

Download: PDF
FCCID_4289874

TEST REPORT No. I19Z60566-EMC01 for Shenzhen Tinno Mobile Technology Corp. Smart Phone Model Name: U304AA FCC ID: XD6U304AA with Hardware Version: V1.0 Software Version: U304AAV01.18.11 Issued Date: 2019-05-07 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S.Government. Test Laboratory: CTTL, Telecommunication Technology Labs, CAICT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512, Fax:+86(0)10-62304633-2504 Email: cttl_terminals@caict.ac.cn, website: www.caict.ac.cn ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 2 of 22 REPORT HISTORY Report Number Revision Description Issue Date st I19Z60566-EMC01 Rev.0 1 edition 2019-05-07 ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 3 of 22 CONTENTS 1. TEST LABORATORY ............................................................................................................... 4 1.1. TESTING LOCATION ........................................................................................................... 4 1.2. TESTING ENVIRONMENT ................................................................................................... 4 1.3. PROJECT DATA ................................................................................................................... 4 1.4. SIGNATURE .......................................................................................................................... 4 2. CLIENT INFORMATION ........................................................................................................... 5 2.1. APPLICANT INFORMATION ................................................................................................ 5 2.2. MANUFACTURER INFORMATION ...................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 6 3.1. ABOUT EUT .......................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ................................... 6 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST...................................... 6 3.4. EUT SET-UPS ....................................................................................................................... 7 4. REFERENCE DOCUMENTS .................................................................................................... 8 4.1. REFERENCE DOCUMENTS FOR TESTING....................................................................... 8 5. LABORATORY ENVIRONMENT.............................................................................................. 9 6. SUMMARY OF TEST RESULTS ............................................................................................ 10 7. TEST EQUIPMENTS UTILIZED ............................................................................................. 11 ANNEX A: MEASUREMENT RESULTS ....................................................................................... 12 ANNEX B: PERSONS INVOLVED IN THIS TESTING ................................................................. 22 ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 4 of 22 1. Test Laboratory 1.1. Testing Location CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China100191 1.2. Testing Environment Normal Temperature: 15-35℃ Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2019-04-23 Testing End Date: 2019-05-06 1.4. Signature Wang Junqing (Prepared this test report) Zhang Ying (Reviewed this test report) Liu Baodian Deputy Director of the laboratory (Approved this test report) ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 5 of 22 2. Client Information 2.1. Applicant Information Company Name: Shenzhen Tinno Mobile Technology Corp. 4/F, H-3 Building,OCT Eastern lndustrial Park. NO.1 XiangShan East Address: Road, Nan Shan District, Shenzhen, P.R.China City: Shenzhen Postal Code: / Country: China Contact Person Jingwen.Guo Contact Email jingwen.guo@tinno.com Telephone: 0755-86095550 Fax: \ 2.2. Manufacturer Information Company Name: Shenzhen Tinno Mobile Technology Corp. 4/F, H-3 Building,OCT Eastern lndustrial Park. NO.1 XiangShan East Address: Road, Nan Shan District, Shenzhen, P.R.China City: Shenzhen Postal Code: / Country: China Contact Jingwen.Guo Telephone: 0755-86095550 Fax: \ ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 6 of 22 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description Smart Phone Model Name U304AA FCC ID XD6U304AA Extreme vol. Limits 3.5VDC to 4.4VDC (nominal: 3.85VDC) Note: Components list, please refer to documents of the manufacturer; it is also included in the original test record of CTTL,Telecommunication Technology Labs, CAICT. 3.2. Internal Identification of EUT used during the test EUT ID* SN or IMEI HW Version SW Version EUT1 863382040008011 V1.0 U304AAV01.18.11 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description SN Remarks AE1 Battery / / AE2 Charger / / AE3 USB Cable / / AE4 Headset / / AE1 Model LT25H426271B Manufacturer Shenzhen BYD Lithium Battery Company Limited Capacitance 2500 mAh Nominal voltage 3.85V AE2 Model TN-050100U4A Manufacturer Shenzhen BMT Electrones Co,Ltd Length of cable / AE3 Model / Manufacturer / Length of cable 100cm AE4 Model / Manufacturer / Length of cable 125cm *AE ID: is used to identify the test sample in the lab internally. Note: The USB cables are shielded. ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 7 of 22 3.4. EUT set-ups EUT set-up No. Combination of EUT and AE Remarks Set.1 EUT1+ AE2+ AE3+AE4 Charger+Headset Set.2 EUT1+ AE3 USB ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 8 of 22 4. Reference Documents 4.1. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC Part 15, Subpart B Radio frequency devices - Unintentional Radiators 2016 ANSI C63.4 American National Standard for 2014 Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Note: The test methods have no deviation with standards. ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 9 of 22 5. LABORATORY ENVIRONMENT Semi-anechoic chamber SAC-1 (23 meters×17meters×10meters) did not exceed following limits along the EMC testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. = 15 %, Max. = 75 % Shielding effectiveness 0.014MHz-1MHz, >60dB; 1MHz - 1000MHz, >90dB. Electrical insulation > 2 M Ground system resistance <4  Normalised site attenuation (NSA) < ±4 dB, 10 m distance Site voltage standing-wave ratio (SVSWR) Between 0 and 6 dB, from 1GHz to 6GHz Uniformity of field strength Between 0 and 6 dB, from 80 to 3000 MHz Semi-anechoic chamber SAC-2 (10 meters×6.7meters×6.1meters) did not exceed following limits along the EMC testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. = 15 %, Max. = 75 % 0.014MHz - 1MHz, >60dB; Shielding effectiveness 1MHz - 1000MHz, >90dB. Electrical insulation > 2 M Ground system resistance <4  Normalised site attenuation (NSA) < ± 4 dB, 3m distance, from 30 to 1000 MHz Site voltage standing-wave ratio (SVSWR) Between 0 and 6 dB, from 1GHz to 18GHz Uniformity of field strength Between 0 and 6 dB, from 80 to 3000 MHz Shielded room did not exceed following limits along the EMC testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. = 20 %, Max. = 75 % Shielding effectiveness 0.014MHz-1MHz, >60dB; 1MHz－1000MHz, >90dB. Electrical insulation > 2 M Ground system resistance <4  ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 10 of 22 6. SUMMARY OF TEST RESULTS Abbreviations used in this clause: P Pass Verdict Column NA Not applicable F Fail Clause in Section in Test Items Test Name Verdict FCC rules this report Location Radiated CTTL(huayuan 1 15.109(a) B.1 P Emission North Road) Conducted CTTL(huayuan 2 15.107(a) B.2 P Emission North Road) ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 11 of 22 7. Test Equipments Utilized CAL DUE CALIBRATI SERIES NO. Description TYPE MANUFACTURE DATE ON NUMBER INTERVAL 1 Test Receiver ESCI7 100948 R&S 2019-06-27 1 Year Universal Radio 2 Communication CMW500 143008 R&S 2019-11-26 1 year Tester 3 LISN ENV216 101200 R&S 2020-03-14 1 year 4 EMI Antenna VULB 9163 9163-483 Schwarzbeck 2019-08-21 1 year 5 EMI Antenna 3115 00167250 ETS-Lindgren 2019-05-17 1 year 6 PC OPTIPLEX 380 2X1YV2X DELL N/A N/A 7 Printer P1606dn VNC3L52122 HP N/A N/A CN0RH6596589 8 Keyboard L100 DELL N/A N/A 07ATOI40 9 Mouse M-UAE119 LZ935220ZRC Lenovo N/A N/A ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 12 of 22 ANNEX A: MEASUREMENT RESULTS A.1 Radiated Emission Reference FCC: CFR Part 15.109(a). A.1.1 Method of measurement The field strength of radiated emissions from the unintentional radiator (USB mode of MS and charging mode of MS) at distances of 10 meters(for 30MHz-1GHz) and 3 meters (for above 1GHz) is tested. Tested in accordance with the procedures of ANSI C63.4 – 2014, section 8.3. The EUT was placed on a non-conductive table. The measurement antenna was placed at a distance of 3/10 meters from the EUT. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. A.1.2 EUT Operating Mode The MS is operating in the USB mode and charging mode. During the test MS is connected to a PC via a USB cable in the case of USB mode and is connected to a charger in the case of charging mode. The model of the PC is DELL OPTIPLEX 380, and the serial number of the PC is 2X1YV2X. The software is used to let the PC keep on copying data to MS, reading and erasing the data after copy action was finished. Note：I/O information：Printer – USB, Mouse – PS/2, Keyboard – USB. A.1.3 Measurement Limit Frequency range Field strength limit (µV/m) (MHz) Quasi-peak Average Peak 30-88 100 88-216 150 216-960 200 960-1000 500 >1000 500 5000 Note: the above limit is for 3 meters test distance. 10 meters’ limit is got by converting. A.1.4 Test Condition Frequency range (MHz) RBW/VBW Sweep Time (s) Detector 30-1000 120kHz (IF Bandwidth) 5 Peak/Quasi-peak Above 1000 1MHz/1MHz 15 Peak, Average ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 13 of 22 A.1.5 Measurement Results A "reference path loss" is established and the ARpl is the attenuation of “reference path loss”. It includes the antenna factor of receive antenna and the path loss. The measurement results are obtained as described below: Result = PMea + ARpl = PMea + GA + GPL Where GA: Antenna factor of receive antenna GPL: Path Loss PMea: Measurement result on receiver. Measurement uncertainty (worst case): U = 5.44 dB, k=2. Measurement results for Set.1: Charging Mode/Average detector Measurement Cable Antenna Receiver Antenna Frequency Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17826.600 30.5 -18.5 45.6 3.400 H 17398.767 30.4 -19.2 41.5 8.100 H 17492.267 30.4 -19.2 41.5 8.100 V 17451.467 30.4 -19.2 41.5 8.100 H 17467.900 30.4 -19.2 41.5 8.100 H 17419.167 30.3 -19.2 41.5 8.000 H Charging Mode/Peak detector Measurement Cable Antenna Receiver Antenna Frequency Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17408.967 42.2 -19.2 41.5 19.900 H 17618.067 42.2 -18.9 45.6 15.500 H 17333.033 42.2 -19.5 41.5 20.200 V 17372.133 42.2 -19.5 41.5 20.200 H 17609.000 42.1 -18.9 45.6 15.400 H 17830.000 41.9 -18.5 45.6 14.800 H ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 14 of 22 Measurement results for Set.2: USB Mode/Average detector Measurement Cable Antenna Receiver Antenna Frequency Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17828.867 39.6 -18.5 45.6 12.500 H 17779.000 39.6 -18.5 45.6 12.500 H 17823.200 39.4 -18.5 45.6 12.300 V 17795.433 39.4 -18.5 45.6 12.300 H 17968.267 39.4 -17.7 45.6 11.500 H 17469.033 39.4 -19.2 41.5 17.100 H USB Mode/ Peak detector Measurement Cable Antenna Receiver Antenna Frequency Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17599.367 51.9 -18.9 45.6 25.200 H 17428.800 50.9 -19.2 41.5 28.600 H 17901.400 50.7 -18.5 45.6 23.600 V 17993.200 50.7 -17.7 45.6 22.800 H 17408.967 50.6 -19.2 41.5 28.300 H 17789.200 50.4 -18.5 45.6 23.300 H Note: The measurement results of Set.1, Set.2 showed here are worst cases of the combinations of different batteries and USB cables. ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 15 of 22 Charging Mode, Set.1 Level in dBµV/m Fig A.1 Radiated Emission from 30MHz to 1GHz Final_Result Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth (MHz) (dBµV /m) (dBµV /m) (dB) Time (kHz) (cm) (deg) 31.506000 13.88 30.00 16.12 1000.0 (ms) 120.000 121.0 V -22.0 49.109000 19.83 30.00 10.17 1000.0 120.000 125.0 V -25.0 72.310000 19.10 30.00 10.90 1000.0 120.000 197.0 V -14.0 96.847000 21.29 33.50 12.23 1000.0 120.000 100.0 V 181.0 153.804000 15.29 33.50 18.23 1000.0 120.000 110.0 V -29.0 182.267000 13.27 33.50 20.25 1000.0 120.000 190.0 V 200.0 ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 16 of 22 Level in dBµV/m Fig A.2 Radiated Emission from 1GHz to 18GHz ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 17 of 22 USB Mode, Set.2 Level in dBµV/m Fig A.3 Radiated Emission from 30MHz to 1GHz Final_Result Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth (MHz) (dBµV /m) (dBµV /m) (dB) Time (kHz) (cm) (deg) 31.889000 22.34 30.00 7.66 1000.0 (ms) 120.000 100.0 V 64.0 41.783000 10.67 30.00 19.33 1000.0 120.000 325.0 V 21.0 84.957000 11.67 30.00 18.33 1000.0 120.000 125.0 V 30.0 167.971000 24.29 33.50 9.23 1000.0 120.000 125.0 V 157.0 396.669000 19.47 36.00 16.55 1000.0 120.000 107.0 V 60.0 541.536000 15.97 36.00 20.05 1000.0 120.000 325.0 V 30.0 ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 18 of 22 Level in dBµV/m Fig A.4 Radiated Emission from 1GHz to 18GHz ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 19 of 22 A.2 Conducted Emission Reference FCC: CFR Part 15.107(a). A.2.1 Method of measurement For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits. Tested in accordance with the procedures of ANSI C63.4 – 2014, section 7.3. A.2.2 EUT Operating Mode The MS is operating in the USB mode and charging mode. During the test MS is connected to a PC via a USB cable in the case of USB mode and is connected to a charger in the case of charging mode. The model of the PC is DELL OPTIPLEX 380, and the serial number of the PC is 2X1YV2X. The software is used to let the PC keep on copying data to MS, reading and erasing the data after copy action was finished. Note：I/O information：Printer – USB, Mouse – PS/2, Keyboard – USB. A.2.3 Measurement Limit Frequency of emission (MHz) Conducted limit (dBµV) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency A.2.4 Test Condition in charging mode Voltage（V） Frequency（Hz） 120 60 RBW/IF bandwidth Sweep Time(s) 9kHz 1 ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 20 of 22 A.2.5 Measurement Results Measurement uncertainty: U= 3.38 dB, k=2. Charging Mode, Set.1 Level in dBµV F re q u e n c y in H z Fig A.5 Conducted Emission Final Result 1 Frequency QuasiPeak Meas. Bandwidth Line Corr. Margin Limit (MHz) (dBµV) Time (kHz) (dB) (dB) (dBµV) (ms) 0.172500 47.4 2000.0 9.000 On L1 25.8 17.4 0.577500 45.1 2000.0 9.000 On N 19.8 10.9 1.671000 42.5 2000.0 9.000 On L1 19.6 13.5 2.314500 41.9 2000.0 9.000 On L1 19.6 14.1 3.606000 34.4 2000.0 9.000 On L1 19.6 21.6 10.968000 42.9 2000.0 9.000 On L1 19.7 17.1 Final Result 2 Frequency Average Meas. Bandwidth Line Corr. Margin Limit (MHz) (dBµV) Time (kHz) (dB) (dB) (dBµV) (ms) 0.582000 39.7 2000.0 9.000 On N 19.8 6.3 1.216500 34.2 2000.0 9.000 On N 19.6 11.8 1.680000 30.0 2000.0 9.000 On L1 19.6 16.0 3.295500 28.1 2000.0 9.000 On L1 19.6 17.9 3.606000 25.3 2000.0 9.000 On L1 19.6 20.7 10.837500 35.5 2000.0 9.000 On L1 19.7 14.5 Note: The measurement results showed here are worst cases of the combinations of different batteries and USB cables. ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 21 of 22 USB Mode, Set.2 Level in dBµV F re q u e n c y in H z Fig A.6 Conducted Emission Final Result 1 Frequency QuasiPeak Meas. Bandwidth Line Corr. Margin Limit (MHz) (dBµV) Time (kHz) (dB) (dB) (dBµV) (ms) 0.154500 47.6 2000.0 9.000 On L1 29.7 18.2 0.429000 40.9 2000.0 9.000 On L1 19.8 16.4 0.474000 45.1 2000.0 9.000 On N 19.8 11.4 1.018500 37.6 2000.0 9.000 On N 19.7 18.4 1.387500 40.8 2000.0 9.000 On L1 19.6 15.2 2.211000 34.7 2000.0 9.000 On N 19.6 21.3 Final Result 2 Frequency Average Meas. Bandwidth Line Corr. Margin Limit (MHz) (dBµV) Time (kHz) (dB) (dB) (dBµV) (ms) 0.154500 46.3 2000.0 9.000 On L1 29.7 9.5 0.271500 36.7 2000.0 9.000 On L1 19.8 14.4 0.469500 41.3 2000.0 9.000 On N 19.8 5.2 1.162500 31.1 2000.0 9.000 On L1 19.7 14.9 1.356000 33.1 2000.0 9.000 On L1 19.6 12.9 2.130000 27.8 2000.0 9.000 On N 19.6 18.2 Note: The measurement results showed here are worst cases of the combinations of different batteries and USB cables. ©Copyright. All rights reserved by CTTL.

No.I19Z60566-EMC01 Page 22 of 22 ANNEX B: PERSONS INVOLVED IN THIS TESTING Test Item Test Software and Version Software Vendor Test operator Conducted Emission EMC32 V8.5.2 R&S Wang Huan Radiated Emission EMC32 V9.01.00 R&S Li Jinpeng ***END OF REPORT*** ©Copyright. All rights reserved by CTTL.


Document Created: 2019-05-21 19:33:36
Document Modified: 2019-05-21 19:33:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC