Test reports

FCC ID: XBD-BT43ISC

Test Report

Download: PDF
FCCID_4282685

Test Report FCC ID: XBD-BT43ISC Date of issue: Apr. 15, 2019 Report Number: MTi190411E063 Sample Description: BluStreamFM Model(s): BT43IS Rev C, BTHFS430 Rev C Applicant: AAMP of Florida, Inc. dba AAMP Global Address: 15500 Lightwave Dr. Suite 202 Clearwater, Florida 33760 United States Date of Test: Mar. 29, 2019 – Apr. 15, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 20 - Report No.: MTi190411E063 Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 4 1.1 DESCRIPTIONS OF EUT ............................................................................................................................................... 4 1.2 FREQUENCY CHANNEL UNDER TEST .............................................................................................................................. 4 1.3 ANCILLARY EQUIPMENT LIST......................................................................................................................................... 4 1.4 DESCRIPTION OF SUPPORT UNITS ................................................................................................................................. 4 2 SUMMARY OF TEST RESULTS ............................................................................................................................. 6 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 3.1 TEST LABORATORY...................................................................................................................................................... 7 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 3.3 MEASUREMENT UNCERTAINTY...................................................................................................................................... 7 3.4 TEST SOFTWARE ........................................................................................................................................................ 7 4 EQUIPMENT LIST ............................................................................................................................................... 8 5 TEST RESULT ...................................................................................................................................................... 9 5.1 ANTENNA REQUIREMENT ............................................................................................................................................ 9 5.1.1 Standard requirement ................................................................................................................................. 9 5.1.2 EUT antenna description ............................................................................................................................. 9 5.2 AC POWER LINE CONDUCTED EMISSION....................................................................................................................... 10 5.2.1 Limit .......................................................................................................................................................... 10 5.2.2 Test method .............................................................................................................................................. 10 5.2.3 Test Result ................................................................................................................................................. 10 5.3 FIELD STRENGTH OF FUNDAMENTAL AND HARMONIC EMISSIONS ...................................................................................... 11 5.3.1 Limits ......................................................................................................................................................... 11 5.3.2 Test Method .............................................................................................................................................. 11 5.3.3 Test Result ................................................................................................................................................. 12 5.4 OPERATING FREQUENCY& OCCUPIED BANDWIDTH ....................................................................................................... 13 5.4.1 Limits ......................................................................................................................................................... 13 5.4.2 Test method .............................................................................................................................................. 13 5.4.3 Test result.................................................................................................................................................. 13 5.5 RADIATED EMISSION ................................................................................................................................................ 14 5.5.1 Limit .......................................................................................................................................................... 14 5.5.2 Test method .............................................................................................................................................. 14 5.5.3 Test Result ................................................................................................................................................. 14 PHOTOGRAPHS OF THE TEST SETUP ...........................................................................................................................19 PHOTOGRAPHS OF THE EUT .......................................................................................................................................20 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 3 of 20 - Report No.: MTi190411E063 Test Result Certification Applicant’s name: AAMP of Florida, Inc. dba AAMP Global Address: 15500 Lightwave Dr. Suite 202 Clearwater, Florida 33760 United States Manufacture's name: Skytech creations limited Unit 507, 5/F., IC Development Centre, No.6 Science Park West Address: Avenue, Shatin, Hong Kong Product name: BluStreamFM Trademark: iSimple Model name: BT43IS Rev C, BTHFS430 Rev C Standards: FCC Part 15.239 ANSI C63.10-2013 Test Procedure: DA 00-705 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Demi Mu Apr. 15, 2019 Reviewed by: Blue Zheng Apr. 15, 2019 Approved by: Smith Chen Apr. 15, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 4 of 20 - Report No.: MTi190411E063 1 General description 1.1 Descriptions of EUT Product name: BluStreamFM Model name: BT43IS Rev C Series model: BTHFS430 Rev C All models are the same circuit and RF module, except for the Difference of series model: model No.. Tx/Rx frequency range: 88.1 MHz to 107.9 MHz Modulation type: FM Power source: DC 12V by battery Adapter information: N/A Antenna designation: PCB antenna (Antenna Gain: 0dBi) Hardware version: V0.6 Software version: V0.3 1.2 199 channels are provided to FM Channel List Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 1 88.1 100 98.0 198 107.8 2 88.2 101 98.1 199 107.9 k 88.1+0.1(k-1) -- -- 1.3 Frequency Channel Under Test Channel Frequency Low 88.1MHz Middle 98.1MHz High 107.9MHz 1.4 Ancillary equipment list Equipment Model S/N Manufacturer Battery / / / 1.5 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 5 of 20 - Report No.: MTi190411E063 support units. The following support units or accessories were used to form a representative test configuration during the tests. Item Equipment Brand Model/Type No. Series No. Note / / / / / / / / / / Note: (1)The support equipment was authorized by Declaration of Confirmation. (2)For detachable type I/O cable should be specified the length in cm in『Length』column. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 6 of 20 - Report No.: MTi190411E063 2 Summary of Test Results Test procedures according to the technical standards: Item FCC Part No. Description of Test Result Remark 1 15.203 Antenna requirement Pass AC power line conducted 2 15.207 Pass emission Field strength of fundamental 3 15.239 (b) Pass and harmonic emissions 4 15.209 Radiated emission Pass 5 15.239 (a) Operating frequency Pass 6 15.239 (a) Occupied Bandwidth Pass The meaning of symbols: “N/A” – Not Applicable Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 7 of 20 - Report No.: MTi190411E063 3 Test Facilities and Accreditations 3.1 Test laboratory Test Laboratory Shenzhen Microtest Co., Ltd No.102A & 302A, East Block, Hengfang Industrial Park, Location Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China FCC Registration 448573 No.: 3.2 Environmental conditions Temperature: 15ºC~35ºC Humidity 20%~75% Atmospheric 98kPa~101kPa pressure 3.3 Measurement uncertainty The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 % RF frequency 1 x 10-7 RF power, conducted ±1.38dB Conducted emission(150kHz~30MHz) ±0.21dB Radiated emission(30MHz~1GHz) ±4.68dB Radiated emission (above 1GHz) ±4.89dB Temperature ±0.5°C Humidity ±2% 3.4 Test software Software Manufacturer Model Version Name RF Test System Farad LZ-RF Lz_Rf 3A3 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 8 of 20 - Report No.: MTi190411E063 4 Equipment list Equipmen Equipment Manufactur Calibratio Model Serial No. Due date t No. Name er n date Spectrum MTI-E001 Agilent E4407B MY41441082 2018/09/18 2019/09/17 Analyzer Rohde&schw MTI-E004 EMI Test Receiver ESPI 1000314 2018/09/18 2019/09/17 arz Broadband VULB916 MTI-E006 schwarabeck 872 2018/09/18 2019/09/17 antenna 3 BBHA912 MTI-E007 Horn antenna schwarabeck 1201 2018/09/18 2019/09/17 0D MTI-E014 amplifier America 8447D 3113A06150 2018/09/18 2019/09/17 Conduction 126A1343/20 MTI-E015 Immunity Signal Schloder CDG6000 2018/09/18 2019/09/17 15 Generator Coupled CND A2210332/20 MTI-E016 decoupling Schloder 2018/09/18 2019/09/17 M2/M3 15 network MTI-E034 amplifier Agilent 8449B 3008A02400 2018/09/18 2019/09/17 Artificial power NSLK812 MTI-E037 Schwarzbeck #841 2018/09/18 2019/09/17 network 7 Spectrum MTI-E040 Agilent N9020A MY49100060 2018/09/18 2019/09/17 analyzer MTI-E041 Signal generator Agilent N5182A MY49060455 2018/09/18 2019/09/17 Analog signal MTI-E042 Agilent E4421B GB40051240 2018/09/18 2019/09/17 generator Dare RPR3006 16I00054SN MTI-E043 Power probe 2018/09/18 2019/09/17 Instruments W O16 MTI-E047 10dB attenuator Mini-Circuits UNAT-10+ 15542 2018/09/18 2019/09/17 spectrum Rohde&schw MTI-E049 FSP-38 100019 2018/09/18 2019/09/17 analyzer arz PSG Signal MTI-E050 Agilent E8257D MY46520873 2018/09/18 2019/09/17 generator Active Loop FMZB MTI-E061 Antenna 9kHz - Schwarzbeek 00044 2018/09/18 2019/09/17 1519 B 30MHz Chengdu 18-40GHz ZLNA-18- MTI-E052 step Micro 1608001 2018/09/18 2019/09/17 amplifier 40G-21 Technology BBHA917 BBHA91705 MTI-E053 15-40G Antenna Schwarzbeek 2018/09/18 2019/09/17 0 82 Artificial power NSLK812 MTI-E058 Schwarzbeck #841 2018/09/18 2019/09/17 network 7 Note: the calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 9 of 20 - Report No.: MTi190411E063 5 Test Result 5.1 Antenna requirement 5.1.1 Standard requirement 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device 5.1.2 EUT antenna description The EUT antenna is PCB antenna (0dBi). It comply with the standard requirement. In case of replacement of broken antenna the same antenna type must be used. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 10 of 20 - Report No.: MTi190411E063 5.2 AC power line conducted emission 5.2.1 Limit Frequency Limit (MHz) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 Note: Decreases with the logarithm of the frequency from 0.15MHz to 0.5MHz. 5.2.2 Test method 1. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipment powered from additional LISN(s). The LISN provide 50 Ohm/50uH of coupling impedance for the measuring instrument. 2. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. 3. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. 4. LISN is at least 80 cm from nearest part of EUT chassis. 5. The resolution bandwidth of EMI test receiver is set at 9kHz. 5.2.3 Test Result Note: the device is battery powered, so this item is not available. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 11 of 20 - Report No.: MTi190411E063 5.3 Field strength of fundamental and harmonic emissions 5.3.1 Limits §15.239 (b): The field strength of any emissions within the permitted 200 kHz band shall not exceed 250 microvolts/meter at 3 meters. The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. 5.3.2 Test Method 1. The EUT is placed on a turntable, which is 0.8m above ground plane for test frequency range blew 1GHz, and 1.5m above ground plane for test frequency range above 1GHz. 2. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 3. Use the following spectrum analyzer settings: Span = wide enough to fully capture the emission being measured RBW = 1 MHz for f ≥ 1GHz RBW = 100 kHz for f < 1 GHz VBW ≥ RBW Sweep = Auto Detector function = Peak Trace = max hold 4. Follow the guidelines in ANSI C63.4-2014 with respect to maximizing the emission by rotating the EUT, adjusting the measurement antenna height and polarization, etc. The peak reading of the emission, after being corrected by the antenna factor, cable loss, pre-amp gain, etc., is the peak field strength, submit this data. Each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 5. The peak level, once corrected, must comply with the limit specified in Section 15.209. Set the spectrum to RBW = 1MHz VBW = 10Hz Detector = PK for AV value, while maintaining all of the other instrument settings Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 12 of 20 - Report No.: MTi190411E063 5.3.3 Test Result Field Strength of Fundamental Emissions and Field strength of spurious emissions Value Field Operating Frequency Limit @3m Margin Strength Detector Antenna (MHz) (dBuV/m) (dB) (dBuV/m) 41.13 QP 67.96 26.83 Vertical 88.1 21.71 Average 47.96 26.25 Horizontal 43.29 QP 67.96 24.67 Vertical 98.1 21.46 Average 47.96 26.50 Horizontal 42.31 QP 67.96 25.65 Vertical 107.9 20.8 Average 47.96 27.16 Horizontal Note: If the PK measured values lower than average mode limit, the EUT shall be deemed to meet average limits and then no additional average mode measurement performed. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 13 of 20 - Report No.: MTi190411E063 5.4 Operating frequency& Occupied Bandwidth 5.4.1 Limits §15.239 (a): Emissions from the intentional radiator shall be confined within a band 200 kHz wide centered on the operating frequency. The 200 kHz band shall lie wholly within the frequency range of 88-108 MHz. 5.4.2 Test method Use the following spectrum analyzer settings: Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel RBW ≥1% of the 20 dB bandwidth VBW ≥RBW Sweep = auto Detector function = peak Trace = max hold The EUT should be transmitting at its maximum data rate. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. Use the marker-delta function to measure 20 dB down one side of the emission. Reset the marker-delta function, and move the marker to the other side of the emission, until it is (as close as possible to) even with the reference marker level. The marker-delta reading at this point is the 20 dB bandwidth and 99% occupied bandwidth of the emission. 5.4.3 Test result Permitted range of operating frequencies FL (KHz) FH(kHz) Limit (MHz) Result (kHz) 88.0658 107.9342 FL≥88 FH≤108 Pass 20dBm emission bandwidth Limit Frequency (MHz) (KHz) (KHz) 88.1 68.25 200 98.1 68.31 200 107.9 68.43 200 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 14 of 20 - Report No.: MTi190411E063 5.5 Radiated emission 5.5.1 Limit Emissions radiated outside of the specified frequency bands, except for harmonic emissions, (b)shall be attenuated by at least 50 dB below the level of the fundamental emissions or to the general field strength limits listed in RSS-Gen, whichever is less stringent. Field Field Frequency Measurement strength strength Detector (MHz) distance μV/m dBμV/m 30-88 100 40 QP 88-216 150 43.5 QP 216-960 200 46 QP 3m 960-1000 500 54 QP Above 1000 500 54 AV Above 1000 5000 74 PK 5.5.2 Test method 1. The EUT is placed on a turntable, which is 0.8m above ground plane for test frequency range blew 1GHz, and 1.5m above ground plane for test frequency range above 1GHz. 2. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 3. Use the following spectrum analyzer settings: Span = wide enough to fully capture the emission being measured RBW = 1 MHz for f ≥ 1GHz 100 kHz for f < 1 GHz, VBW ≥ RBW Sweep = auto Detector function = peak Trace = max hold 4. Follow the guidelines in ANSI C63.4-2014 with respect to maximizing the emission by rotating the EUT, adjusting the measurement antenna height and polarization, etc. The peak reading of the emission, after being corrected by the antenna factor, cable loss, pre-amp gain, etc., is the peak field strength, submit this data. Each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 5. The peak level, once corrected, must comply with the limit specified in Section 15.209. Set the RBW = 1MHz, VBW = 10Hz, Detector = PK for AV value, while maintaining all of the other instrument settings. 5.5.3 Test Result Remark: If the PK measured values lower than average mode limit, the EUT shall be deemed to meet average limits and then no additional average mode measurement performed. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 15 of 20 - Report No.: MTi190411E063 Radiated emission Between 30MHz – 1GHz Note: All the modulation modes have been tested, and the worst result was report as below: EUT： BluStreamFM Model Name ： BT43IS Rev C Relative 52% Phase: H Humidity: Pressure： 1010 hPa Test Voltage ： DC 12V from battery Test Mode ： TX (98.1MHz) Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 16 of 20 - Report No.: MTi190411E063 EUT： BluStreamFM Model Name ： BT43IS Rev C Relative 52% Phase: V Humidity: Pressure： 1010 hPa Test Voltage ： DC 12V from battery Test Mode ： TX (98.1MHz) Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 17 of 20 - Report No.: MTi190411E063 ABOVE 1GHz EUT： BluStreamFM Model Name ： BT43IS Rev C Relative 52% Phase: H Humidity: Pressure： 1010 hPa Test Voltage ： DC 12V from battery Test Mode ： TX (98.1MHz) Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 18 of 20 - Report No.: MTi190411E063 EUT： BluStreamFM Model Name ： BT43IS Rev C Relative 52% Phase: V Humidity: Pressure： 1010 hPa Test Voltage ： DC 12V from battery Test Mode ： TX (98.1MHz) Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 19 of 20 - Report No.: MTi190411E063 PHOTOGRAPHS OF THE TEST SETUP Radiated emission Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 20 of 20 - Report No.: MTi190411E063 PHOTOGRAPHS OF THE EUT See the APPENDIX 1: EUT PHOTO in the report No.: MTi190411E062-1. ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2019-05-14 16:34:59
Document Modified: 2019-05-14 16:34:59
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC